Perceptions of European medical staff on the facilitators and barriers to physical closeness between parents and infants in neonatal units

AIM: Studies have provided insights into factors that may facilitate or inhibit parent-infant closeness in neonatal units, but none have specifically focused on the perspectives of senior neonatal staff. The aim of this study was to explore perceptions and experiences of consultant neonatologists and senior nurses in five European countries with regard to these issues. METHODS: Six small group discussions and three one-to-one interviews were conducted with 16 consultant neonatologists and senior nurses representing nine neonatal units from Estonia, Finland, Norway, Spain and Sweden. The interviews explored facilitators and barriers to parent-infant closeness and implications for policy and practice and thematic analysis was undertaken. RESULTS: Participants highlighted how a humanising care agenda that enabled parent-infant closeness was an aspiration, but pointed out that neonatal units were at different stages in achieving this. The facilitators and barriers to physical closeness included socio-economic factors, cultural norms, the designs of neonatal units, resource issues, leadership, staff attitudes and practices and relationships between staff and parents. CONCLUSION: Various factors affected parent-infant closeness in neonatal units in European countries. There needs to be the political motivation, appropriate policy planning, legislation and resource allocation to increase measures that support closeness agendas in neonatal units. This article is protected by copyright. All rights reserved.

On the sound waves propagation in the Persian Gulf

In this research I focused on the propagation of acoustic rays in shallow water areas then I selected the Persian Gulf and described sound transmission in this region with emphasize on physical properties of water masses and of sediments. Finally I studied on the sound speed variations and sound attention with data collected from this area (NE of Farsi Island & 50 kilometers south of Delware). Sound speed deviation in western part of Strait of Hormuz in winter is between 20-30 m/s and it is between 5-20 m/s in the Oman Sea. Minimum sound speed deviation is at 23-24 degree north & 60-62 degree east. In spring, this deviation varies from 25-35 m/s, which is greater than in winter. In winter, at east of 56 degree east, greater speed are in shallow water coastal areas. In summer, sound speeds are greater than in spring and vary from 35 to 55 m/s at western part of Strait of Hormuz and 20 to 40 m/s in Oman Sea. Finally in autumn, sound speed deviation is 30-45 m/s west of 56 degree east and in Oman Sea is the same. The greatest attenuation rate caused by absorption in Bandar Dayer is between 17 to 27 meters depth, which is from water masses with different densities.

Technical Report on the reduced graphene oxide biosynthesis protocol for biological applications

The interest of scientific community on carbon-based smart materials is growing and, especially focus on graphene oxide (GO) and reduced graphene oxide (rGO). An increasing number of bio-applications such as biological applications as bacterial inhibition, drug delivery and photothermal therapy aims the use of GO and rGO. For this reason, the methods used for the synthesis of graphene materials are more important because same of those procedures imply chemical reactions that involve hazardous and toxic reagents. In fact, the biocompatibility and toxicological activity of graphene-related materials is related to the methodologies employed for the synthesis that determine the carbon/oxygen (C/O) ratio of graphene oxide species. In this technical report, we focused on the synthesis of GO by means of that lead to a biocompatible GO form with a lower oxygen content. Thus, the synthesis of rAsGFP-rGO with the green fluorescent protein allowed us to obtain a biocompatible materials, without using hazardous and toxic reagents. This biocompatibility is the most important prerogative for the use of GO in biological activity assays as reported in several publications.

The effect of Lampara net on the catch rates and size of the fishing harvest of Rastrineobola argentae (mukene) in selected parts of Lake Victoria, Uganda

This study was undertaken in Napoleon gulf, and part of the off shore area of Lake Victoria Uganda in the landing site of Lufu in Buvuma district in the month of October 2015 for three days of sampling. It was conducted in four landing sites; Busana, Kikondo from Buikwe district and Lufu landing site from Buvuma district. The main aim was to determine the effect of Lampara net on the catch rate and size of the Rastrineobola argentae (mukene) harvested on Lake Victoria using various mesh sizes. The study focused on the 5mm and 10 mm mesh sizes of the Lampara net. A total of 109 boats were sampled; from the 5 mm mesh sizes indicated catch rates of 78-200 kg/boat/day and yet for 10 mm mesh size was at 248 kg/boat day. Statistical tests were carried out on the these two mesh sizes using One way Anova and indicated in catches was (Anova F=7.476; P<0.05) and for the price values was (Anova F=5.488 ; P<0.05). This is an indication that despite the fact that the mukene fishery is on the increase, a time will come when it also be depleted so a need to use the rightful fishing gear of 10mm mesh size is advisable for the biodiversity conservation.

Some preliminary observations on the chemical composition of Cam-Ranh Bay sediments

This paper deals with the results of various observations focused on the chemical composition of sediments of Cam-Ranh Bay, 50km south from Nhatrang

Pattern and function of woody features on the grazing itineraries of Terra Fria, Trás–os–Montes – Portugal

The trees, hedgerows and woods are current configuration of the tree network in several ecological regions of the world. In Trás–os–Montes region, Northeast of Portugal, they are a traditional component of Terra fria landscape and they could be seen in several forms: scatter trees, fencerows, small woodlots, riparian buffer strips, among others. The extensive livestock systems in this region are based on a set of circuits across the landscape. In this practice, flocks interacts with these structures using them for different functions inducing an influence on the itineraries. Our purpose will be focused on the woody features of landscape regarding their configurations, abundance and spacial distribution; in order to examine how the grazing systems depends on the currency of these formations; particularly how species flocks behaviors are related on. Depending on spatial data, The investigation attain to compare the tree network within the agriculture matrix, to the grazed territory crossed by flocks. From the other side, the importance of spatial data on interpreting the issue by suggesting different parameter that may influence the circuits. The recognition of the pressure exerciced by the occurence of the woody structures on the grazed circuits is possible. We believe that the role of these woody structures features in supporting the tradicional silvopastoral systems has been sufficiently strong for change their distribution pattern.

A Irrequietude motora como expressão de uma função materna comprometida: Método Rorschach

Dissertação de Mestrado apresentada ao Instituto Superior de Psicologia Aplicada para obtenção de grau de Mestre na especialidade de Psicologia Clínica.

Influence of Soil Biogeochemical Properties on the Invasiveness of Old World Climbing Fern (Lygodium microphyllum)

The state of Florida has one of the most severe exotic species invasion problems in the United States, but little is known about their influence on soil biogeochemistry. My dissertation research includes a cross-continental field study in Australia, Florida, and greenhouse and growth chamber experiments, focused on the soil-plant interactions of one of the most problematic weeds introduced in south Florida, Lygodium microphyllum (Old World climbing fern). Analysis of field samples from the ferns introduced and their native range indicate that L microphyllum is highly dependent on arbuscular mycorrhizal fungi (AMF) for phosphorus uptake and biomass accumulation. Relationship with AMF is stronger in relatively dry conditions, which are commonly found in some Florida sites, compared to more common wet sites where the fern is found in its native Australia. In the field, L. microphyllum is found to thrive in a wide range of soil pH, texture, and nutrient conditions, with strongly acidic soils in Australia and slightly acidic soils in Florida. Soils with pH 5.5 - 6.5 provide the most optimal growth conditions for L. microphyllum, and the growth declines significantly at soil pH 8.0, indicating that further reduction could happen in more alkaline soils. Comparison of invaded and uninvaded soil characteristics demonstrates that L. microphyllum can change the belowground soil environment, with more conspicuous impact on nutrient-poor sandy soils, to its own benefit by enhancing the soil nutrient status. Additionally, the nitrogen concentration in the leaves, which has a significant influence in the relative growth rate and photosynthesis, was significantly higher in Florida plants compared to Australian plants. Given that L. microphyllum allocates up to 40% of the total biomass to rhizomes, which aid in rapid regeneration after burning, cutting or chemical spray, hence management techniques targeting the rhizomes look promising. Over all, my results reveal for the first time that soil pH, texture, and AMF are major factors facilitating the invasive success of L. mcirophyllum. Finally, herbicide treatments targeting rhizomes will most likely become the widely used technique to control invasiveness of L. microphyllum in the future. However, a complete understanding of the soil ecosystem is necessary before adding any chemicals to the soil to achieve a successful long-term invasive species management strategy.

A Study on the Correlation of Bivariate And Trivariate Normal Models

Suppose two or more variables are jointly normally distributed. If there is a common relationship between these variables it would be very important to quantify this relationship by a parameter called the correlation coefficient which measures its strength, and the use of it can develop an equation for predicting, and ultimately draw testable conclusion about the parent population. This research focused on the correlation coefficient ρ for the bivariate and trivariate normal distribution when equal variances and equal covariances are considered. Particularly, we derived the maximum Likelihood Estimators (MLE) of the distribution parameters assuming all of them are unknown, and we studied the properties and asymptotic distribution of . Showing this asymptotic normality, we were able to construct confidence intervals of the correlation coefficient ρ and test hypothesis about ρ. With a series of simulations, the performance of our new estimators were studied and were compared with those estimators that already exist in the literature. The results indicated that the MLE has a better or similar performance than the others.

Effects of plasticizing and crosslinking on the mechanical and barrier properties of coatings based on blends of starch and poly(vinyl alcohol)

In the last decades, intensive research has been carried out in order to replace oil-based polymers with bio-based polymers due to growing environmental concerns. So far, most of the barrier materials used in food packaging are petroleum-based materials. The purpose of the barrier is to protect the packaged food from oxygen, water vapour, water and fat. The mechanical and barrier properties of coatings based on starch-plasticizer and starch-poly(vinyl alcohol) (PVOH)-plasticizer blends have been studied in the work described in this thesis. The plasticizers used were glycerol, polyethylene glycol and citric acid. In a second step, polyethylene coatings were extruded onto paperboard pre-coated with a starch-PVOH-plasticizer blend. The addition of PVOH to the starch increased the flexibility of the film. Curing of the film led to a decrease in flexibility and an increase in tensile strength. The flexibility of the starch-PVOH films was increased more when glycerol or polyethylene glycol was added than citric acid. The storage modulus of the starch-PVOH films containing citric acid increased substantially at high temperature. It was seen that the addition of polyethylene glycol or citric acid to the starch-PVOH blend resulted in an enrichment of PVOH at the surface of the films. Tensile tests on the films indicated that citric acid acted as a compatibilizer and increased the compatibility of the starch and PVOH in the blend. The addition of citric acid to the coating recipe substantially decreased the water vapour transmission rate through the starch-PVOH coated paperboard, which indicated that citric acid acts as a cross-linker for starch and/or PVOH. The starch-PVOH coatings containing citric acid showed oxygen-barrier properties similar to those of pure PVOH or of a starch-PVOH blend without plasticizer when four coating layers were applied on a paperboard. The oxygen-barrier properties of coatings based on a starch-PVOH blend containing citric acid indicated a cross-linking and increase in compatibility of the starch-PVOH blends. Polyethylene extrusion coating on a pre-coated paperboard resulted in a clear reduction in the oxygen transmission rate for all the pre-coating formulations containing plasticizers. The addition of a plasticizer to the pre-coating reduced the adhesion of polyethylene to pre-coated board. Polyethylene extrusion coating gave a board with a lower oxygen transmission rate when the paperboard was pre-coated with a polyethylene-glycol-containing formulation than with a citric-acid-containing formulation. The addition of polyethylene glycol to pre-coatings indicated an increase in wetting of the pre-coated paperboard by the polyethylene melt, and this may have sealed the small defects in the pre-coating leading to low oxygen transmission rate. The increase in brittleness of starch-PVOH films containing citric acid at a high temperature seemed to have a dominating effect on the barrier properties developed by the extrusion coating process. 

On the motion planning & control of nonlinear robotic systems

In the last decades, we saw a soaring interest in autonomous robots boosted not only by academia and industry, but also by the ever in- creasing demand from civil users. As a matter of fact, autonomous robots are fast spreading in all aspects of human life, we can see them clean houses, navigate through city traffic, or harvest fruits and vegetables. Almost all commercial drones already exhibit unprecedented and sophisticated skills which makes them suitable for these applications, such as obstacle avoidance, simultaneous localisation and mapping, path planning, visual-inertial odometry, and object tracking. The major limitations of such robotic platforms lie in the limited payload that can carry, in their costs, and in the limited autonomy due to finite battery capability. For this reason researchers start to develop new algorithms able to run even on resource constrained platforms both in terms of computation capabilities and limited types of endowed sensors, focusing especially on very cheap sensors and hardware. The possibility to use a limited number of sensors allowed to scale a lot the UAVs size, while the implementation of new efficient algorithms, performing the same task in lower time, allows for lower autonomy. However, the developed robots are not mature enough to completely operate autonomously without human supervision due to still too big dimensions (especially for aerial vehicles), which make these platforms unsafe for humans, and the high probability of numerical, and decision, errors that robots may make. In this perspective, this thesis aims to review and improve the current state-of-the-art solutions for autonomous navigation from a purely practical point of view. In particular, we deeply focused on the problems of robot control, trajectory planning, environments exploration, and obstacle avoidance.

Steel hopper silos filled with granular material: experimental tests on the tensile resistance of corrugated sheets and on the filling and discharging pressures

This thesis addresses various aspects related to silos, from the strength of some structural parts to internal actions due to grain. Two hopper silo models were mainly studied, so the thesis is divided into two parts. The first part focuses only on the silo cylinder and deals with the collapse of a silo due to failure of the vertical walls. We had the opportunity to access data from a real silo and perform tensile tests on corrugated sheets. The theoretical and experimental resistance of the corrugated sheet forming the silo cylinder was studied. The resistance was then compared with the internal actions due to grain prescribed by various standards. The second part, however, focused on the hopper of a silo in which a load test (loading and unloading of the silo) was performed. Through the test data, an attempt was made to reproduce the pressures normal to the hopper through analytical reasoning. The experimental pressures were then compared with the theoretical pressures predicted by the standards. In addition, with mathematical reasoning, an attempt was made to reproduce the horizontal pressure on the vertical walls of the silo from the experimental normal pressure in the hopper. In fact, the test was related only to the hopper part and not to the silo cylinder.

Porque ler não chega… da biblioteca escolar à sala de aula: um percurso de leitura e escrita

Projeto de Intervenção apresentado à Escola Superior de Educação de Lisboa para a obtenção de grau de Mestre em Didática da Língua Portuguesa no 1º e 2º CEB

Trabalho cooperativo como finalidade e estratégia de aprendizagem. Um estudo de caso em biologia humana

A aprendizagem cooperativa é concebida como uma estratégia pedagógica que privilegia uma aprendizagem personalizada e que potencia o sucesso educativo não só individual mas também coletivo. É conseguida através da cooperação de todos os membros do grupo, em que o desempenho de cada um influencia e é influenciado pelo desempenho do Outro. O grupo é concebido como uma organização social cuja eficiência implica a capacidade de construção e manutenção do grupo como um todo e de promoção do sucesso educativo de todos os elementos. É este quadro teórico que enforma a conceção, implementação e avaliação de uma intervenção pedagógica em Biologia Humana do 10º ano do Curso Tecnológico de Desporto. A estratégia pedagógica carateriza-se pela operacionalização articulada de estruturas e papéis de cooperação na abordagem da unidade didática - Transformação e Utilização de Energia - com a finalidade de promover a aprendizagem integrada de competências de cooperação e de conhecimento substantivo da área da Biologia. A avaliação da intervenção pedagógica incidiu nos objetivos de investigação - 1) Identificar o impacto da estratégia de intervenção pedagógica no desenvolvimento de competências de cooperação e 2) Identificar o impacto da estratégia de intervenção pedagógica no desenvolvimento de competências disciplinares –, efetuada a partir da análise de tarefas de aprendizagem e de um questionário de avaliação final global aplicado aos alunos. A estratégia de intervenção pedagógica é percecionada pelos alunos como tendo contribuído para a promoção do desenvolvimento não só de competências de cooperação mas também do conhecimento substantivo e do pensamento crítico.

A compreensão dos problemas de estrutura aditiva e estrutura multiplicativa por crianças do pré-escolar

Tese de Doutoramento em Ciências da Educação (área de especialização em Educação Matemática).