The effect of high temperature on the insecticidal properties of Bt Cotton

Bt transgenic cotton has not shown the same level of resistance to bollworm in China, as in other major Bt cotton growing areas of the world. The objective of this study was to investigate the effects of high temperature on the CryIA insecticidal protein content and nitrogen metabolism, in the leaf of Bt transgenic cotton. The study was undertaken on two transgenic cotton cultivars, one conventional (Xinyang 822) and the other a hybrid (Kumian No. 1), during the 2001 and 2002 growing seasons at the Yangzhou University Farm, Yangzhou, China. In the 2001 study, potted cotton plants were exposed to 37 C for 24 h under glasshouse conditions at three growth stages peak square, peak flowering and peak boll developing periods. Based on the 2001 results, in 2002 the same two cultivars were exposed to the same temperature for 48 h at two growth stages-peak flowering and boll developing periods. The results of the study indicated that the insecticidal protein content of the leaf was not significantly affected by the stress during the square and flowering periods. However, exposure to high temperature for 24h during the boll period reduced the CryIA protein content by approximately 51% in the cultivar Kumian No 1, and 30% in Xinyang 822 in the 2001 study, and by approximately 73 and 63% for 48 h with the same cultivars, respectively, in the 2002 study. Glutamic-pyruvic transaminase (GPT) activity, total free amino acid and soluble protein content, and the activity of protease in the leaf, showed relatively little change in response to high temperature in the flowering period. However, exposure to high temperature in the boll period resulted in the following changes - a reduction of GPT activity, a sharp increase in free amino acid content, a significant decrease in soluble protein content, and significant increases in the activity of protease. The results suggest that high temperature may result in the degradation of soluble protein in the leaf, with a resulting decline in the level of the toxin CryIA. It is believed that this may be the cause of the reduced efficacy of Bt cotton in growing conditions in China, where temperatures during the boll period often reach 36-40° C. © 2004 Elsevier B.V All rights reserved.

Anisotropy for spatial summation of elongated patches of grating:A tale of two tails

Studies of spatial summation often use sinusoidal gratings with blurred edges. When the envelope is elongated (i) along the grating stripes and (ii) at right angles to the grating stripes, we refer to the stimuli as skunk-tails and tiger-tails respectively. Previous work [Polat & Tyler, 1999; Vision Research, 39, 887-895.] has found that sensitivity to skunk-tails is greater than for tiger-tails, but there have been several failures to replicate this result within a subset of the conditions. To address this we measured detection thresholds for skunk-tails, tiger-tails and squares of grating with sides matched to the lengths of the tails. For foveal viewing, we found a contrast sensitivity advantage in the order of 2 dB for skunk-tails over tiger-tails, but only for horizontal gratings. For vertical gratings, sensitivity was very similar for both tail-types. When the stimuli were presented parafoveally (upper right visual field), a small advantage was found for skunk-tails over tiger-tails at both orientations, and spatial summation slopes were close to that of the ideal observer. We did not replicate the findings of Polat & Tyler, but our results are consistent with (i) those of Foley et al. [Foley, J. M., Varadharajan, S., Koh, C. C., & Farias, C. Q. (2007) Vision Research, 47, 85-107.] who used only vertical gratings and (ii) those from modelfest, where only horizontal gratings were used. The small effect of tail-type here suggests an anisotropy in the underlying physiology. © 2007 Elsevier Ltd. All rights reserved.

La responsabilité civile dans les cas de dommages causés par les robots d’assistance au Québec

Le développement exponentiel de la technologie et le vieillissement de la population permettent d’introduire dans notre quotidien les robots d’assistance. La coexistence de l’homme avec ces robots intelligents et autonomes soulève une question fondamentale: dans l’éventualité où un robot provoquerait un accident causant un dommage à une personne ou à un bien qui serait le responsable? Aucune loi ne réglemente les activités de la robotique d’assistance dans le monde. Cette étude vise l’analyse de l’applicabilité des régimes de responsabilité du Code Civil du Québec aux cas de dommages causés par le robot d’assistance. L’analyse des régimes de responsabilité du Code civil du Québec permet de constater que deux régimes de responsabilité sont susceptibles d’être appliqués aux cas spécifiques de dommages causés par le robot d’assistance: le régime de responsabilité du fait des biens, énoncé à l’article 1465 C.c.Q., et le régime de responsabilité du fait des fabricants et vendeurs spécialisés, énoncé à l’article 1468 C.c.Q. Cela s’explique par la présence de critères et de conditions de mise en œuvre des régimes qui sont transposables aux différents aspects concernant la fabrication et l’utilisation du robot d’assistance.

La subrogation légale de l’assureur en vertu du Code civil : historique, développements et aspects procéduraux

En assurance de dommages, l’article 2474 C.c.Q. prévoit la possibilité pour l’assureur d’être légalement subrogé dans les droits de l’assuré contre l’auteur du préjudice, à concurrence des indemnités qu’il a payées. L’assureur ne pourra jamais être subrogé contre les personnes faisant partie de la maison de l’assuré. Dans un premier temps, le présent mémoire fait un survol historique du droit à la subrogation de l’assureur en vertu du Code civil. Depuis la codification de 1865, les principes relatifs à la subrogation de l’assureur ne sont pas demeurés statiques. Ils firent l’objet de plusieurs modifications législatives et de nombreuses controverses et développements jurisprudentiels. Dans un deuxième temps, un portrait global de l’état actuel du droit est dressé en ce qui concerne l’article 2474 C.c.Q., tant sur le plan des composantes du droit à la subrogation que de ses aspects procéduraux.

La responsabilité civile dans les cas de dommages causés par les robots d’assistance au Québec

Le développement exponentiel de la technologie et le vieillissement de la population permettent d’introduire dans notre quotidien les robots d’assistance. La coexistence de l’homme avec ces robots intelligents et autonomes soulève une question fondamentale: dans l’éventualité où un robot provoquerait un accident causant un dommage à une personne ou à un bien qui serait le responsable? Aucune loi ne réglemente les activités de la robotique d’assistance dans le monde. Cette étude vise l’analyse de l’applicabilité des régimes de responsabilité du Code Civil du Québec aux cas de dommages causés par le robot d’assistance. L’analyse des régimes de responsabilité du Code civil du Québec permet de constater que deux régimes de responsabilité sont susceptibles d’être appliqués aux cas spécifiques de dommages causés par le robot d’assistance: le régime de responsabilité du fait des biens, énoncé à l’article 1465 C.c.Q., et le régime de responsabilité du fait des fabricants et vendeurs spécialisés, énoncé à l’article 1468 C.c.Q. Cela s’explique par la présence de critères et de conditions de mise en œuvre des régimes qui sont transposables aux différents aspects concernant la fabrication et l’utilisation du robot d’assistance.

La subrogation légale de l’assureur en vertu du Code civil : historique, développements et aspects procéduraux

En assurance de dommages, l’article 2474 C.c.Q. prévoit la possibilité pour l’assureur d’être légalement subrogé dans les droits de l’assuré contre l’auteur du préjudice, à concurrence des indemnités qu’il a payées. L’assureur ne pourra jamais être subrogé contre les personnes faisant partie de la maison de l’assuré. Dans un premier temps, le présent mémoire fait un survol historique du droit à la subrogation de l’assureur en vertu du Code civil. Depuis la codification de 1865, les principes relatifs à la subrogation de l’assureur ne sont pas demeurés statiques. Ils firent l’objet de plusieurs modifications législatives et de nombreuses controverses et développements jurisprudentiels. Dans un deuxième temps, un portrait global de l’état actuel du droit est dressé en ce qui concerne l’article 2474 C.c.Q., tant sur le plan des composantes du droit à la subrogation que de ses aspects procéduraux.

Características preferidas por hombres y mujeres que buscan pareja estable de su mismo sexo

Las preferencias en elección de pareja de hombres y mujeres interesados en establecer relaciones a largo plazo con personas de su mismo sexo biológico ha sido un tema de interés para el análisis evolucionista, ya que existe debate frente a los resultados de las investigaciones y los planteamientos de las teorías de inversión parental y estrategias sexuales. Con el objetivo de identificar qué características son preferidas por hombres y mujeres interesados en establecer una relación a largo plazo con personas de su mismo sexo biológico y contribuir a esta discusión, se llevó a cabo un estudio descriptivo en el que analizamos el contenido de 732 perfiles de hombres y mujeres (H=491; M=241) que buscaban una relación estable con parejas de su mismo sexo biológico. Las categorías analizadas fueron: edad, atractivo físico (apariencia, contextura, estatura y peso), estatus socioeconómico (situación laboral, nivel educativo y zona de residencia buscada), estado civil, número de hijos y hábitos saludables (fumar y beber). Los resultados encontrados muestran que los hombres presentan rangos amplios en las características deseadas en una pareja (edad=16.87; estatura=11.37; peso=15.23) y además buscan personas menores a la edad ofrecida (M=-4.17 años). En las mujeres se encontró que los rangos son más restringidos (edad=13.85; estatura=9.83; peso=12.77) y además prefieren parejas mayores (M=2.89 años). A nivel general, se evidencia que los resultados encontrados en la mayoría de las variables podrían indicar congruencia con los planteamientos de la teoría de inversión parental y estrategias sexuales; sin embargo, en otras variables los resultados no son claros.

Internationalisation of emerging market firms : an exploratory study of Chilean companies

Purpose This paper explores how firms from a Latin American market internationalise using the resource-based view (RBV) of the firm as a theoretical foundation. Specifically, it examines the internationalisation process of three Chilean companies that have become relevant international players. Design/methodology/approach Drawing on interviews with company managers, as well as industry data and corporate reports, this paper provides insights into the successful internationalisation process of emerging market firms. Findings The findings of this study suggest that specific capabilities and resources, such as belonging to a family conglomerate, domestic and foreign partnerships and networks, innovation and market orientation, and an experienced management team, are required for emerging market firms to internationalise and improve their performance in foreign markets. Originality/value This study is one of the few to address the internationalisation process of Chilean companies.

Increasing learners’ satisfaction/intention to adopt more e-learning

Purpose: E-learning is an organisationally risky investment given the cost and poor levels of adoption by users. In order to gain a better understanding of this problem, a study was conducted into the use of e-learning in a rail organisation. Design/methodology/approach: Using an online survey, employees of a rail-sector organisation were questioned about their use and likelihood of adoption of e-learning. This study explores the factors that affect the way in which learners experience and perceive such systems. Using statistical analysis, twelve hypotheses are tested and explored. Relationships between learning satisfaction, intention to adopt and the characteristics of e-learning systems were established. Findings: The study found that e-learning characteristics can buffer the relationship between learner characteristics and intention to adopt further e-learning in the future. Further, we found that high levels of support can compensate individuals who are low in technological efficacy to adopt e-learning. Research limitations/implications: The cross-sectional design of the study and its focus on measuring intention to adopt as opposed to actual adoption are both limitations. Future research using longitudinal design and research employing a time lag design measuring actual adoption as well as intention are recommended. Practical implications: From a practical perspective, organizations can focus on the actual content and authenticity of the learning experience delivered by the e-learning system to significantly impact how employees will perceive and use e-learning in the future. Low technological efficacy individuals tend not to adopt new technology. Instead of changing individuals’ personalities, organizations can implement supportive policies and practices which would lead to higher e-learning adoption rate among low efficacy individuals. Originality/value: The study integrates technology adoption and learning literatures in developing enablers for e-learning in organizations. Further, this study collects data from rail employees, and therefore the findings are practical to an industry.

Downtime model development for construction equipment management

Downtime (DT) caused by non-availability of equipment and equipment breakdown has non-trivial impact on the performance of construction projects. Earlier research has often addressed this fact, but it has rarely explained the causes and consequences of DT – especially in the context of developing countries. This paper presents a DT model to address this issue. Using this model, the generic factors and processes related to DT are identified, and the impact of DT is quantified. By applying the model framework to nine road projects in Nepal, the impact of DT is explored in terms of its duration and cost. The research findings highlight how various factors and processes interact with each other to create DT, and mitigate or exacerbate its impact on project performance. It is suggested that construction companies need to adopt proactive equipment management and maintenance programs to minimize the impact of DT.

Inside the boardroom : exploring board member interactions

This study aims to open-up the black box of the boardroom by directly observing directors’ interactions during meetings to better understand board processes. Design/methodology/approach: We analyse videotaped observations of board meetings at two Australian companies to develop insights into what directors do in meetings and how they participate in decision-making processes. The direct observations are triangulated with semi-structured interviews, mini-surveys and document reviews. Findings: Our analyses lead to two key findings: (i) while board meetings appear similar at a surface-level, boardroom interactions vary significantly at a deeper level (i.e. board members participate differently during different stages of discussions) and (ii) factors at multiple levels of analysis explain differences in interaction patterns, revealing the complex and nested nature of boardroom discussions. Research implications: By documenting significant intra- and inter-board meeting differences our study (i) challenges the widespread notion of board meetings as rather homogeneous and monolithic, (ii) points towards agenda items as a new unit of analysis (iii) highlights the need for more multi-level analyses in a board setting. Practical implications: While policy makers have been largely occupied with the “right” board composition, our findings suggest that decision outcomes or roles’ execution could be potentially affected by interactions at a board level. Differences in board meeting styles might explain prior ambiguous board structure-performance results, enhancing the need for greater normative consideration of how boards do their work. Originality/value: Our study complements existing research on boardroom dynamics and provides a systematic account of director interactions during board meetings.

How two-tier boards can be more effective

Purpose: This study explores how non-executive directors address governance problems on Dutch two-tier boards. Within this board model, challenges might be particularly difficult to address due to the formal separation of management boards’ decision-management from supervisory boards’ decision-control roles. Design/methodology/approach: Semi-structured interviews and a questionnaire among non-executive directors provide unique insights into three major challenges in the boardrooms of two-tier boards in the Netherlands. Findings: The study indicates that non-executive directors mainly experience challenges in three areas: the ability to ask management critical questions, information asymmetries between the management and supervisory boards and the management of the relationship between individual executive and non-executive directors. The qualitative in-depth analysis reveals the complexity of the contributing factors to problems in the boardroom and the range of process and social interventions non-executive directors use to address boardroom issues with management and the organization of the board. Practical implications: While policy makers have been largely occupied with the ‘right’ board composition, the results highlight the importance of adequately addressing operational challenges in the boardroom. The results emphasize the importance of a better understanding of board processes and the need of non-executive directors to carefully manage relationships in and around the boardroom. Originality/value: Whereas most studies have focussed on regulatory initiatives to improve the functioning of boards (e.g., the independence of the board), this study explores how non-executive directors attempt to enhance the effectiveness of boards on which they serve.

Distributing leadership and cultivating dialogue with collaborative EBIP

The purpose of this paper is to demonstrate the efficacy of collaborative evidence based information practice (EBIP) as an organizational effectiveness model. Shared leadership, appreciative inquiry and knowledge creation theoretical frameworks provide the foundation for change toward the implementation of a collaborative EBIP workplace model. Collaborative EBIP reiterates the importance of gathering the best available evidence, but it differs by shifting decision-making authority from "library or employer centric" to "user or employee centric". University of Colorado Denver Auraria Library Technical Services department created a collaborative EBIP environment by flattening workplace hierarchies, distributing problem solving and encouraging reflective dialogue. By doing so, participants are empowered to identify problems, create solutions, and become valued and respected leaders and followers. In an environment where library budgets are in jeopardy, recruitment opportunities are limited and the workplace is in constant flux, the Auraria Library case study offers an approach that maximizes the capability of the current workforce and promotes agile responsiveness to industry and organizational challenges. Collaborative EBIP is an organizational model demonstrating a process focusing first on the individual and moving to the collective to develop a responsive and high performing business unit, and in turn, organization.

Ethics and social networking sites : a disclosive analysis of Facebook

Purpose – This paper aims to provide insights into the moral values embodied by a popular social networking site (SNS), Facebook. Design/methodology/approach – This study is based upon qualitative fieldwork, involving participant observation, conducted over a two-year period. The authors adopt the position that technology as well as humans has a moral character in order to disclose ethical concerns that are not transparent to users of the site. Findings – Much research on the ethics of information systems has focused on the way that people deploy particular technologies, and the consequences arising, with a view to making policy recommendations and ethical interventions. By focusing on technology as a moral actor with reach across and beyond the internet, the authors reveal the complex and diffuse nature of ethical responsibility and the consequent implications for governance of SNS. Research limitations/implications – The authors situate their research in a body of work known as disclosive ethics, and argue for an ongoing process of evaluating SNS to reveal their moral importance. Along with that of other authors in the genre, this work is largely descriptive, but the paper engages with prior research by Brey and Introna to highlight the scope for theory development. Practical implications – Governance measures that require the developers of social networking sites to revise their designs fail to address the diffuse nature of ethical responsibility in this case. Such technologies need to be opened up to scrutiny on a regular basis to increase public awareness of the issues and thereby disclose concerns to a wider audience. The authors suggest that there is value in studying the development and use of these technologies in their infancy, or if established, in the experiences of novice users. Furthermore, flash points in technological trajectories can prove useful sites of investigation. Originality/value – Existing research on social networking sites either fails to address ethical concerns head on or adopts a tool view of the technologies so that the focus is on the ethical behaviour of users. The authors focus upon the agency, and hence the moral character, of technology to show both the possibilities for, and limitations of, ethical interventions in such cases.

Gay men, Gaydar and the commodification of difference

Purpose – The purpose of this paper is to investigate information communications technologies (ICT)-mediated inclusion and exclusion in terms of sexuality through a study of a commercial social networking web site for gay men. Design/methodology/approach – The paper uses an approach based on technological inscription and the commodification of difference to study Gaydar, a commercial social networking site. Findings – Through the activities, events and interactions offered by Gaydar, the study identifies a series of contrasting identity constructions and market segmentations that are constructed through the cyclic commodification of difference. These are fuelled by a particular series of meanings attached to gay male sexualities which serve to keep gay men positioned as a niche market. Research limitations/implications – The research centres on the study of one, albeit widely used, web site with a very specific set of purposes. The study offers a model for future research on sexuality and ICTs. Originality/value – This study places sexuality centre stage in an ICT-mediated environment and provides insights into the contemporary phenomenon of social networking. As a sexualised object, Gaydar presents a semiosis of politicised messages that question heteronormativity while simultaneously contributing to the definition of an increasingly globalised, commercialised and monolithic form of gay male sexuality defined against ICT