Selectome update: quality control and computational improvements to a database of positive selection.

Selectome (http://selectome.unil.ch/) is a database of positive selection, based on a branch-site likelihood test. This model estimates the number of nonsynonymous substitutions (dN) and synonymous substitutions (dS) to evaluate the variation in selective pressure (dN/dS ratio) over branches and over sites. Since the original release of Selectome, we have benchmarked and implemented a thorough quality control procedure on multiple sequence alignments, aiming to provide minimum false-positive results. We have also improved the computational efficiency of the branch-site test implementation, allowing larger data sets and more frequent updates. Release 6 of Selectome includes all gene trees from Ensembl for Primates and Glires, as well as a large set of vertebrate gene trees. A total of 6810 gene trees have some evidence of positive selection. Finally, the web interface has been improved to be more responsive and to facilitate searches and browsing.

Submerged Vanes for Flow Control and Bank Protection in Streams, HR-255, 1984

This study was conducted for the purpose of evaluating a new concept for a bank-protection structure: The Iowa Vane . The underlying idea involves countering the torque exerted on the primary flow by its curvature and vertical velocity gradient, thereby eliminating or significantly reducing the secondary flow and thus reducing the undermining of the outer banks and the high-velocity attack on it. The new structure consists of an array of short, vertical, submerged vanes installed with a certain orientation on the channel bed. A relatively small number of vanes can produce bend flows which are practically uniform across the channel. The height of the vanes is less than half the water depth, and their angle with the flow direction is of the order of l0 degrees. In this study, design relations have been established. The relations, and the vanes' overall performance, have been tested in a laboratory model under different flow and sediment conditions. The results are used for the design of an Iowa-Vane bank protection structure for a section of East Nishnabotna River along U.S. Highway 34 at Red Oak, Iowa.

Mission-Oriented Dust Control and Surface Improvement Processes for Unpaved Roads, HR-194, 1981

Six subject areas prompted the broad field of inquiry of this mission-oriented dust control and surface improvement project for unpaved roads: • DUST--Hundreds of thousands of tons of dust are created annually by vehicles on Iowa's 70,000 miles of unpaved roads and streets. Such dust is often regarded as a nuisance by Iowa's highway engineers. • REGULATIONS--Establishment of "fugitive dust" regulations by the Iowa DEQ in 1971 has created debates, conferences, legal opinions, financial responsibilities, and limited compromises regarding "reasonable precaution" and "ordinary travel," both terms being undefined judgment factors. • THE PUBLIC--Increased awareness by the public that regulations regarding dust do in fact exist creates a discord of telephone calls, petitions, and increasing numbers of legal citations. Both engineers and politicians are frustrated into allowing either the courts or regulatory agencies to resolve what is basically a professional engineering responsibility. • COST--Economics seldom appear as a tenet of regulatory strategies, and in the case of "fugitive dust," four-way struggles often occur between the highway professions, political bodies, regulatory agencies, and the general public as to who is responsible, what can be done, how much it will cost, or why it wasn't done yesterday. • CONFUSION--The engineer lacks authority, and guidelines and specifications to design and construct a low-cost surf acing system are nebulous, i.e., construct something between the present crushed stone/gravel surface and a high-type pavement. • SOLUTION--The engineer must demonstrate that dust control and surface improvement may be engineered at a reasonable cost to the public, so that a higher degree of regulatory responsibility can be vested in engineering solutions.

Role of dendritic cells in the lung: in vitro models, animal models and human studies

Dendritic cells (DCs) are the most potent antigen-presenting cells in the human lung and are now recognized as crucial initiators of immune responses in general. They are arranged as sentinels in a dense surveillance network inside and below the epithelium of the airways and alveoli, where thet are ideally situated to sample inhaled antigen. DCs are known to play a pivotal role in maintaining the balance between tolerance and active immune response in the respiratory system. It is no surprise that the lungs became a main focus of DC-related investigations as this organ provides a large interface for interactions of inhaled antigens with the human body. During recent years there has been a constantly growing body of lung DC-related publications that draw their data from in vitro models, animal models and human studies. This review focuses on the biology and functions of different DC populations in the lung and highlights the advantages and drawbacks of different models with which to study the role of lung DCs. Furthermore, we present a number of up-to-date visualization techniques to characterize DC-related cell interactions in vitro and/or in vivo.

Development of LRFD Procedures for Bridge Pile Foundations in Iowa Volume III: Recommended Resistance Factors with Consideration of Construction Control and Setup, TR-584, 2012

The Federal Highway Administration (FHWA) mandated utilizing the Load and Resistance Factor Design (LRFD) approach for all new bridges initiated in the United States after October 1, 2007. As a result, there has been a progressive move among state Departments of Transportation (DOTs) toward an increased use of the LRFD in geotechnical design practices. For the above reasons, the Iowa Highway Research Board (IHRB) sponsored three research projects: TR-573, TR-583 and TR-584. The research information is summarized in the project web site (http://srg.cce.iastate.edu/lrfd/). Two reports of total four volumes have been published. Report volume I by Roling et al. (2010) described the development of a user-friendly and electronic database (PILOT). Report volume II by Ng et al. (2011) summarized the 10 full-scale field tests conducted throughout Iowa and data analyses. This report presents the development of regionally calibrated LRFD resistance factors for bridge pile foundations in Iowa based on reliability theory, focusing on the strength limit states and incorporating the construction control aspects and soil setup into the design process. The calibration framework was selected to follow the guidelines provided by the American Association of State Highway and Transportation Officials (AASHTO), taking into consideration the current local practices. The resistance factors were developed for general and in-house static analysis methods used for the design of pile foundations as well as for dynamic analysis methods and dynamic formulas used for construction control. The following notable benefits to the bridge foundation design were attained in this project: 1) comprehensive design tables and charts were developed to facilitate the implementation of the LRFD approach, ensuring uniform reliability and consistency in the design and construction processes of bridge pile foundations; 2) the results showed a substantial gain in the factored capacity compared to the 2008 AASHTO-LRFD recommendations; and 3) contribution to the existing knowledge, thereby advancing the foundation design and construction practices in Iowa and the nation.

Linking the population genetics and ecology of arbuscular mycorrhizal fungi

Résumé Les champignons endomycorhiziens arbusculaires (CEA) ont co-évolué avec les plantes terrestres depuis plus de 400 millions d'années. De nos jours, les CEA forment une symbiose avec les racines de la majorité des plantes terrestres. Les CEA sont écologiquement importants parce qu'ils influencent non seulement la croissance des plantes, mais aussi leur diversité. Les CEA sont des biotrophes obligatoires qui reçoivent leur énergie sous forme de glucides issus de la photosynthèse des plantes. En contrepartie, les CEA apportent à leurs hôtes du phospore. Les CEA croissent et se reproduisent clonalement en formant des hyphes et des spores. De plus, les CEA sont coenocytiques et multigénomiques; le cytoplasme d'un CEA contient des noyeaux génétiquement différents. De nombreuses études ont démontré que différentes espèces de CEA agissent différentiellement sur la croissance des plantes. Malgré une conscience de plus en plus forte de l'existence d'une variabilité intraspécifique, la question de savoir si les populations de CEA sont génétiquement variables a été largement négligée. Dans le Chapitre 2, j'ai cherché à savoir si une population de CEA provenant d'un seul champ possède une diversité génétique. Cette étude a mis en évidence une importante variation génétique et phénotypique au sein d'individus de la même population. Des différences au niveau de traits de croissance, héritables et liés à la valeur sélective, indiquent que la variation génétique observée entre isolats n'est pas entièrement neutre. Dans le Chapitre 3, je montre que les différences génétiques entre isolats de CEA d'une population provoquent de la variation dans la croissance des plantes. L'effet des isolats dépend des conditions environnementales et varie de bénéfique à parasitique. Dans le Chapitre 4, je montre que des traits de croissance de CEA varient significativement dans des environnements contrastés. J'ai détecté de fortes interactions entre différents génotypes de CEA et différentes espèces de plantes. Ceci suggère que dans un environnement hétérogène, la sélection pourrait localement favoriser différents génotypes de CEA, maintenant ainsi la diversité génétique dans la population. Les résultats de ce travail aident à mieux comprendre l'importance écologique de la variation intraspécifique des CEA. La possibilité de pouvoir cultiver des individus d'une population de CEA au laboratoire nous a permis une meilleure compréhension de la génétique de ces champignons. De plus, ce travail est une base pour de futures expériences visant à comprendre l'importance évolutive de la diversité intraspécifique des CEA. Abstract Arbuscular mycorrhizal fungi (A1VIF) have co-evolved with land plants -for over 400 million years. Today, AMF form symbioses with roots of most land plants and are ecologically important because they alter plant growth and affect plant diversity. AMF are obligate biotrophs, obtaining their energy in form of plant-derived photosynthates. In return,- they supply their host plants with phosphorous. These fungi grow and reproduce clonally by hyphae and spores. They are coenocytic and multigenomic, harbouring genetically different nuclei in a common cytoplasm. Many studies have shown different AMF species differentially alter plant growth. Despite the increasing awareness of intraspecific variability the question whether there is any genetic variation among different individuals of the same population has been largely neglected. In Chapter 2, we investigated whether there is genetic diversity in a field population of the AMF G. intraradices. This work revealed that large genetic and heritable phenotypic variation exists in this AMF population. Differences in fitness-related growth traits among isolates suggest that some of the observed genetic variation is not selectively neutral. In Chapter 3, we show that genetic differences among isolates from the same population also cause variation in plant growth. The isolate effects on plant growth depended on the environmental conditions and varied from beneficial to detrimental. In Chapter 4, fitnessrelated growth traits of genetically different isolates were significantly altered in contrasting environments. we detected strong AMF isolate by host species interacfions which suggests that in a heterogeneous environment selection could locally favour different AMF genotypes, thereby maintaining high genetic diversity in the population. The results of this work contribute to the understanding of the ecological importance of intraspecific diversity in AMF. The possibility of culturing individuals of an AMF field population under laboratory condition gave new insights into AMF genetics and lays a foundation for future studies to analyse the evolutionary significance of intraspecific genetic diversity in AMF.

Control and Simulation of Batch Crystallization

Concerning process control of batch cooling crystallization the present work focused on the cooling profile and seeding technique. Secondly, the influence of additives on batch-wise precipitation process was investigated. Moreover, a Computational Fluid Dynamics (CFD) model for simulation of controlled batch cooling crystallization was developed. A novel cooling model to control supersaturation level during batch-wise cooling crystallization was introduced. The crystallization kinetics together with operating conditions, i.e. seed loading, cooling rate and batch time, were taken into account in the model. Especially, the supersaturation- and suspension density- dependent secondary nucleation was included in the model. The interaction between the operating conditions and their influence on the control target, i.e. the constant level of supersaturation, were studied with the aid of a numerical solution for the cooling model. Further, the batch cooling crystallization was simulated with the ideal mixing model and CFD model. The moment transformation of the population balance, together with the mass and heat balances, were solved numerically in the simulation. In order to clarify a relationship betweenthe operating conditions and product sizes, a system chart was developed for anideal mixing condition. The utilization of the system chart to determine the appropriate operating condition to meet a required product size was introduced. With CFD simulation, batch crystallization, operated following a specified coolingmode, was studied in the crystallizers having different geometries and scales. The introduced cooling model and simulation results were verified experimentallyfor potassium dihydrogen phosphate (KDP) and the novelties of the proposed control policies were demonstrated using potassium sulfate by comparing with the published results in the literature. The study on the batch-wise precipitation showed that immiscible additives could promote the agglomeration of a derivative of benzoic acid, which facilitated the filterability of the crystal product.

Warlike outlines of the securitarian state. Life control and the exclusion of people

Present book collects some of the thoughts developed during the 5 years (2004-2009) of work in the frame of the CHALLENGE project, "The Changing Landscape of European Liberty and Security". The project has related academic knowledge and research with the analysis of the policies and practices of the member States of the European Union [EU] around the couple liberty and security

Odor emission control and reduce in betaine manufacture

This thesis was made in Naantali plant of Finnfeeds Finland Oy. In this thesis the main study was in reducing, controlling, measuring and processing odour effluents in various methods. Also are considered legislation, marketing issues and environmental requirements of reducing of odour effluents. The literature review introduces odours complications, legislations and various methods of odour removal. There is also a review of volatile organic compounds detection and measuring methods. The experimental section consists TD-GC-MS-measurements and expansive measurements with electronic nose. Electronic nose is a new solution for recognition and measuring industrial odours. In this thesis the electronic nose was adapted into reliable recognition and measuring method. Measurements with electronic nose was made in betaine factory and main targets were odour removal process and other odours from factory. As a result of experimental work with TD-GC-MS-measurements becomes odour compound of 2-and 3- methylbutanal and dimethyldisulfide, which odour is sweet and fug. Extensive study with electronic nose found many developmental subjects. Odour balance measurements of factory and after calculation made adjustment of odour removal process, over all odour effluent to environment will reduce 25 %.