Análise físico-química do MTA e do cimento Portland associado a quatro diferentes radiopacificadores

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise de parâmetros de qualidade da água para consumo humano

The Current work to assess the capacity of water potability samples for that, we used seven different brands of mineral water, bought locally, and also collected seven samples of public drinking fountains located in different places on campus headquarters of the State University of Maringá. The parameters analyzed were presence of fecal and total coliform, turbidity, color and compounds with UV-absorption at 254 nm. On the analysis of coliforms, two brands of mineral water and four samples of drinkers showed presence of total coliform, but no analysis indicated the presence of fecal coliforms. In the turbidity parameter, all samples were within the limits allowed by law, for both cases. No apparent color attribute, two samples of mineral water and a sample of drinking were outside the range required by law. Finally, the determination of UV showed the values of light absorption of each sample at a wavelength of 254nm, however, does not yet exist in Brazil a regulation on this parameter. With such analysis, it was possible to compare the results with current legislation. After these findings, it appears that more stringent hygienic practices should be adopted throughout the processing of mineral water as drinking in public. It is also necessary for greater oversight over the other parameters for determining the quality of water.

Análise do aporte de sedimentos na bacia hidrográfica do córrego Assistência, SP: caso do Polo Cerâmico de Santa Gertrudes

Pós-graduação em Geociências e Meio Ambiente - IGCE

Análise do consumo de extato hidrossolúvel de soja na qualidade do tecido ósseo de ratos jovens adultos

Pós-graduação em Ciência Animal - FMVA

Efeito de duas modalidades esportivas de combate na saúde óssea de adolescentes: análise transversal e longitudinal

Pós-graduação em Fisioterapia - FCT

Análise hormonal, imunolocalização e quantificação dos receptores de andrógenos (AR) e estrógenos (ER-α E ER-β) em ovário e útero de ratas submetidas a diferentes doses de decanoato de nandrolona: avaliação nos períodos pós-tratamento e pós-recuperação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise isotópica do gás carbônico de espumantes comercializados no Brasil

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Avaliação de propriedades físico-químicas e antimicrobianas sobre Enterococcus faecalis do mineral trióxido agregado associado a óleo de melaleuca ou farnesol

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação de propriedades físico-químicas e antimicrobianas sobre Enterococcus faecalis do mineral trióxido agregado associado a óleo de melaleuca ou farnesol

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise de incertezas do modelo de teores associado aos investimentos de pesquisa de longo prazo

Os empreendimentos de mineração comumente demandam grande quantidade de investimentos financeiros e, na maioria das vezes, longos períodos de implantação, o que os torna altamente sujeitos a diversas fontes de incertezas. Tais incertezas comumente tendem a diminuir conforme a evolução do projeto. O objetivo deste estudo é correlacionar as incertezas associadas ao modelo de teores de cobre do depósito Sequeirinho com o volume de investimentos realizados ao longo de distintas fases da pesquisa geológica. Este depósito insere-se no contexto do Complexo de Mineração Sossego, localizado no município de Canaã dos Carajás (PA). Primeiramente, foram realizadas 100 simulações para cada domínio litológico em cada campanha de sondagem (pré-1998, 1999, 2000, 2002 e 2003) a partir do método de simulação sequencial gaussiana condicionada aos dados amostrais, totalizando 1.400 possíveis cenários. Para a avaliação das incertezas foram calculados três índices: variância condicional, coeficiente de variação condicional e intervalo interquartil. Por fim, a avaliação dos investimentos foi elaborada a partir dos custos estimados para o desenvolvimento de sondagens e análises químicas. Desde a campanha pré-1998, houve uma tendência de os teores médios do depósito aproximarem-se dos prováveis valores reais observados nas fases finais da pesquisa. No ano de 2000 ocorreu o maior investimento (cerca de 28 milhões de Reais) e a redução das incertezas atingiu o patamar de 15%. Os investimentos desenvolvidos em sondagens posteriores à campanha de 2000 foram da ordem de 9 milhões de Reais (cerca de 12 mil metros de sondagem), porém, não foram constatadas reduções significativas das incertezas. Este investimento seria melhor aproveitado caso fosse redirecionado a novas áreas de prospecção. Além do montante financeiro necessário para a redução das incertezas, foco deste estudo, as variações na interpretação geológica e a locação dos furos de sondagem são variáveis importantes na análise de incertezas associadas aos investimentos em pesquisa geológica.

Caracterização tecnológica de minérios auríferos por análise automatizada de imagens obtidas por microscopia eletrônica de varredura.

O ouro, assim como outros bens minerais, é uma commodity, ou seja, um produto não diferenciado, com preço determinado pelo mercado internacional, sem a interferência de seus produtores. Diante desse cenário, associado à exaustão dos depósitos minerais de maiores teores, as mineradoras vêm buscando melhores formas de aproveitamento de matérias-primas minerais mais complexas quanto à extração e ao beneficiamento. Os retornos financeiros são obtidos no estrito controle da produção com redução de custos e mitigação de perdas nas operações unitárias. A caracterização tecnológica está inserida como uma abordagem multidisciplinar e fundamental para o melhor aproveitamento dos bens minerais. Possibilita um maior conhecimento do minério e das associações minerais presentes, que auxiliará no desenvolvimento das alternativas de explotação e na otimização do processo em funcionamento. Dentre os procedimentos de caracterização das associações minerais mais acurados citam-se os sistemas automatizados de análise de imagens adquiridas por microscopia eletrônica de varredura. Permitem a avaliação qualitativa ou quantitativa de grande número de partículas quanto à composição química e mineral, partição de elementos nos minerais presentes, formas de associações e liberação entre os minerais. Este estudo se concentra na caracterização de quatro amostras mineralizadas a ouro, de diferentes regiões do Brasil, pela análise automatizada de imagens e por métodos laboratoriais de separações minerais e extração hidrometalúrgica do ouro. A combinação de procedimentos laboratoriais com a análise de imagens permitiu confrontar os resultados das recuperações potenciais, fornecendo subsídios para abordagens de processo, para obtenção da máxima recuperação do ouro e para diagnosticar as características interferentes nesses processos.

Análise geoambiental da plataforma continental Rasa Equatorial, por meio de sensoriamento remoto e dados sedimentológicos: parrachos de Rio do Fogo-RN, Brasil

In the shallow continental shelf in Northeastern Rio Grande do Norte - Brazil, important underwater geomorphological features can be found 6km from the coastline. They are coral reefs, locally known as “parrachos”. The present study aims to characterize and analyze the geomorphological feature as well as the ones of the benthic surface, and the distribution of biogenic sediments found in parrachos at Rio do Fogo and associated shallow platforms, by using remote sensing products and in situ data collections. This was made possible due to sedimentological, bathymetric and geomorphological maps elaborated from composite bands of images from the satellite sensors ETM+/Landsat-7, OLI/Landsat-8, MS/GeoEye and PAN/WordView-1, and analysis of bottom sediments samples. These maps were analyzed, integrally interpreted and validated in fieldwork, thus permitting the generation of a new geomorphological zoning of the shallow shelf in study and a geoenvironmental map of the Parrachos in Rio do Fogo. The images used were subject to Digital Image Processing techniques. All obtained data and information were stored in a Geographic Information System (GIS) and can become available to the scientific community. This shallow platform has a carbonate bottom composed mostly by algae. Collected and analyzed sediment samples can be classified as biogenic carbonatic sands, as they are composed 75% by calcareous algae, according to the found samples. The most abundant classes are green algae, red algae, nonbiogenic sediments (mineral grains), ancient algae and molluscs. At the parrachos the following was mapped: Barreta Channel, intertidal reefs, submerged reefs, the spur and grooves, the pools, the sandy bank, the bank of algae, sea grass, submerged roads and Rio do Fogo Channel. This work presents new information about geomorphology and evolution in the study area, and will be guiding future decision making in the handling and environmental management of the region

Análise de sedimentos associados à atividade de perfuração na plataforma continental externa, Bacia Potiguar - Brasil

This study was developed in an area located on the outer shelf in the Potiguar Basin, Brazilian equatorial margin; this tropical shelf represents a modern, highly dynamic mixed carbonate-siliciclastic system. Field sampling was carried out during 3 cruises surrounding a shallow-water exploratory well to compare sediment properties of the seafloor, including grainsize, texture, mineral composition, carbonate content, and organic matter. Cruise 1 (C1) was carried prior to drilling, while Cruise 2(C2) and 3 (C3) respectivelly 3 and 12 months after drilling. The sample grid used had 16 stations located along 4 radials from 50 m the well up to a distance of 500 m. Sediments were analyzed in the first 0-2 cm, and 0-10 cm layers. The results show that sedimentary cover around the well is poor to very poorly sorted, with the particle size predominantly in the medium to coarse sand fraction, followed by gravel and mud. The content of calcium carbonate is greater than 96%, associated to bioclastic sediments, and the content of organic matter is less than 12%. Only minor sedimentological variations occured in the area affected by drilling operations. Mainly observed during the second cruise, in terms of a change in grain size distribution associated to an increase in siliciclastic content, This impact occurred in the most surficial sediment (0-2 cm), in the radial closest to the well (50 m), and could suggest the effects of drilling. However, in the third cruise, one year after drilling, the sediments return to show the same characteristics as in the first cruise. These results show no significant sedimentological variations due to drilling activity, and indicate that ocean dynamics in this area was high enough to recover the environment original characteristics.

Análise de sedimentos associados à atividade de perfuração na plataforma continental externa, Bacia Potiguar - Brasil

This study was developed in an area located on the outer shelf in the Potiguar Basin, Brazilian equatorial margin; this tropical shelf represents a modern, highly dynamic mixed carbonate-siliciclastic system. Field sampling was carried out during 3 cruises surrounding a shallow-water exploratory well to compare sediment properties of the seafloor, including grainsize, texture, mineral composition, carbonate content, and organic matter. Cruise 1 (C1) was carried prior to drilling, while Cruise 2(C2) and 3 (C3) respectivelly 3 and 12 months after drilling. The sample grid used had 16 stations located along 4 radials from 50 m the well up to a distance of 500 m. Sediments were analyzed in the first 0-2 cm, and 0-10 cm layers. The results show that sedimentary cover around the well is poor to very poorly sorted, with the particle size predominantly in the medium to coarse sand fraction, followed by gravel and mud. The content of calcium carbonate is greater than 96%, associated to bioclastic sediments, and the content of organic matter is less than 12%. Only minor sedimentological variations occured in the area affected by drilling operations. Mainly observed during the second cruise, in terms of a change in grain size distribution associated to an increase in siliciclastic content, This impact occurred in the most surficial sediment (0-2 cm), in the radial closest to the well (50 m), and could suggest the effects of drilling. However, in the third cruise, one year after drilling, the sediments return to show the same characteristics as in the first cruise. These results show no significant sedimentological variations due to drilling activity, and indicate that ocean dynamics in this area was high enough to recover the environment original characteristics.

Análise tribo-termodinâmica da aplicação de nanopartículas de Al2O3 como aditivo lubrificante em compressor hermético de refrigeração

The thermodynamic performance of a refrigeration system can be improved by reducing the compression work by a particular technique for a specific heat removal rate. This study examines the effect of small concentrations of Al2O3 (50 nm) nanoparticles dispersion in the mineral oil based lubricant on the: viscosity, thermal conductivity, and lubrication characteristics as well as the overall performance (based on the Second Law of Thermodynamics) of the refrigerating system using R134a or R600a as refrigerants. The study looked at the influences of variables: i) refrigerant charge (100, 110, 120 and 130 g), ii) rotational speed of the condenser blower (800 and 1100 RPM) and iii) nanoparticle concentration (0.1 and 0.5 g/l) on the system performance based on the Taguchi method in a matrix of L8 trials with the criterion "small irreversibility is better”. They were carried pulldown and cycling tests according to NBR 12866 and NBR 12869, respectively, to evaluate the operational parameters: on-time ratio, cycles per hour, suction and discharge pressures, oil sump temperature, evaporation and condensation temperatures, energy consumption at the set-point, total energy consumption and compressor power. In order to evaluate the nanolubricant characteristics, accelerated tests were performed in a HFRR bench. In each 60 minutes test with nanolubricants at a certain concentration (0, 0.1 and 0.5 g/l), with three replications, the sphere (diameter 6.00 ± 0.05 mm, Ra 0.05 ± 0.005 um, AISI 52100 steel, E = 210 GPa, HRC 62 ± 4) sliding on a flat plate (cast iron FC200, Ra <0.5 ± 0.005 um) in a reciprocating motion with amplitude of 1 mm, frequency 20 Hz and a normal load of 1,96 N. The friction coefficient signals were recorded by sensors coupled to the HFRR system. There was a trend commented bit in the literature: a nanolubricant viscosity reduction at the low nanoparticles concentrations. It was found the dominant trend in the literature: increased thermal conductivity with increasing nanoparticles mass fraction in the base fluid. Another fact observed is the significant thermal conductivity growth of nanolubricant with increasing temperature. The condenser fan rotational speed is the most influential parameter (46.192%) in the refrigerator performance, followed by R600a charge (38.606%). The Al2O3 nanoparticles concentration in the lubricant plays a minor influence on system performance, with 12.44%. The results of power consumption indicates that the nanoparticles addition in the lubricant (0.1 g/L), together with R600a, the refrigerator consumption is reduced of 22% with respect to R134a and POE lubricant. Only the Al2O3 nanoparticles addition in the lubricant results in a consumption reduction of about 5%.