Coordenação no sistema agroindustrial da borracha natural : um estudo das relações entre produtores rurais e usinas beneficiadoras paulistas

O enfoque da Nova Economia Institucional é utilizado no estudo de sistemas agroindustriais brasileiros, mas ainda há poucos trabalhos sobre as relações entre produtores rurais e indústrias processadoras. O objetivo deste estudo é aferir o alinhamento das características das transações com os modos de governança adotados na comercialização de borracha natural entre produtores rurais e indústrias de beneficiamento primário. Busca-se confrontar os resultados com as previsões da teoria da Economia dos Custos de Transação, que prevê a adoção da governança mais eficiente, contingenciada ao ambiente transacional. Esta pesquisa utiliza um enfoque pioneiro para o setor. A primeira parte consiste na exploração qualitativa das transações entre produtores rurais e usinas beneficiadoras e na descrição dos elementos que compõe o sistema agroindustrial da borracha natural no Estado de São Paulo. Os resultados desta etapa são utilizados para refinar as hipóteses da etapa quantitativa, que relacionam os modos de governança adotados aos investimentos em ativos específicos, como o plantio de seringueiras, à frequência, à incerteza e à assistência técnica associadas à transação. Os resultados, apesar das limitações devido ao tamanho pequeno da amostra, sugerem que a quantidade de borracha comercializada influi positivamente na adoção de modos de governança mais coordenados e que a recorrência das transações provavelmente está associada a contratos relacionais. A hipótese da endogeneidade é rejeitada.

Competitividade no agronegócio: proposta de modelo para elaboração de estratégia de integração de cadeias para os defensivos agrícolas – o caso do café

A produção sustentável de alimentos é fundamental para suportar o crescimento populacional. Segundo estimativa da FAO, se a população atingir 9,1 bilhões de habitantes em 2050, a produção de alimentos deverá crescer 70%, e a produção nos países em desenvolvimento deverá dobrar. Ou seja, a maior parte do crescimento vem de países emergentes, onde se concentra o maior potencial de crescimento agrícola. Com o aumento populacional e o aumento da renda da população destes países emergentes, há aumento na demanda por produtos de melhor qualidade, fazendo com que o crescimento na produção de alimentos seja não somente de quantidade, mas também, de qualidade e valor. Portanto, a maior a exigência em termos de segurança do alimento, faz com que rastreabilidade e transparência com relação ao uso de tecnologias de produção se transformem em fatores que influenciam a aceitação de alimentos por parte dos consumidores do mercado doméstico e também de mercados internacionais. Neste contexto, o varejo ganha importância estratégica pela proximidade do seu negócio com o consumidor final. Ele é o primeiro elo da cadeia a receber informações sobre o cliente em termos de comportamento de compra e demandas, podendo assim, repassá-las aos outros elos da cadeia chegando até os produtores, que tem que ajustar suas práticas em geral, e principalmente, as práticas agronômicas, no que diz respeito à qualidade e a segurança do alimento. As empresas de insumos e as agroindústrias, que contribuem para uma produção agrícola sustentável terão a preferência dos produtores rurais e varejistas, que tem a missão de entregar produtos de qualidade, seguros, de forma conveniente para o consumidor final que é o elo capaz de movimentar a cadeia em uma única direção - a da agricultura sustentável. É neste contexto que as empresas de defensivos agrícolas devem desenvolver suas estratégias de negócio. Torna-se necessário ter maior “controle” sobre a cadeia, visando o uso correto de seus produtos, visando contribuir para a agricultura sustentável, ganhando participação de mercado e/ou aumentando sua rentabilidade. Para isso, algumas empresas têm desenvolvido estratégias de coordenação de cadeias, ou “food value chain”, com alguns casos exitosos. Neste trabalho, é proposta metodologia para o desenvolvimento e implementação de estratégias de “food value chain” para os defensivos agrícolas. Ao final do trabalho, conclui-se que existem ganhos importantes para a empresa que adota este tipo de estratégia; entretanto, há um aumento na complexidade da operação. Por isso, é uma escolha importante, que deve ser parte da missão da empresa.

Proposta de análise do banco virtual no contexto dos canais bancários e da aceitação dos clientes

O aumento de competitividade do setor financeiro e a inovação tecnológica bancária resultaram em mudanças na forma como os bancos de varejo atendem seus clientes e distribuem seus produtos. O uso de novos canais de atendimento proporciona benefícios para os bancos, como a economia de custos, bem como para os clientes, como a rapidez e conveniência de horário e local para acessar o banco. Nesse cenário surge um novo modelo bancário, chamado de banco virtual, que tem como principal característica não possuir estrutura física de atendimento ao cliente, tendo os seus canais de atendimento de forma remota ou eletrônica. O modelo já se encontra consolidado em alguns países, porém ainda em fase inicial no Brasil. Mas, para a aceitação dessas novas tecnologias ou modelo bancário, os clientes precisam conhecer, compreender e adotar essas novas possibilidades. Nesse contexto, a aceitação de tecnologias bancárias pelo consumidor passa a ser proposta em diversos estudos acadêmicos que investigaram tecnologias específicas, como terminais de autoatendimento, internet e mobile banking principalmente em mercados desenvolvidos. Assim, verifica-se a possibilidade de contribuir tanto na perspectiva acadêmica quanto na empresarial com estudos que investiguem a aceitação de novas tecnologias e modelos de negócios, como de banco virtual, por parte dos consumidores no Brasil, bem como o impacto da entrada desse modelo na indústria bancária. Dessa forma o presente estudo buscou identificar os possíveis fatores de influência na aceitação do banco virtual, utilizando premissas do modelo da Teoria Unificada de Aceitação e Uso da Tecnologia (UTAUT). As análises e resultados apresentados desta pesquisa foram baseados em entrevistas aplicadas junto a executivos do setor bancário e em clientes de um banco virtual. Os procedimentos utilizados permitiram fornecer informações quanto ao impacto e mudanças no modelo do banco tradicional, no aumento do uso e dos investimentos nos canais de tecnologia e nos fatores de expectativa de desempenho, expectativa de esforço e a influência social que se mostraram com alto poder de influência para a aceitação do modelo de banco virtual pelos clientes

Eficiência técnica dos produtores familiares no Projeto de Irrigação do Baixo Açu/RN

SILVA, Jorge Luiz Mariano da. Eficiência técnica dos produtores familiares no projeto de irrigação do Baixo Açu/RN.In: CONGRESSO SA SOCIEDADE BRASILEIRA DE ECONOMIA E SOCIOLOGIA RURAL,42., 2004, Cuiabá - MT. Dinâmcias Setorias e Desevolvimento Regional, 2004.

Fatores que influenciam a aceitação de práticas avançadas de gestão de segurança da informação: um estudo com gestores públicos estaduais no Brasil

This study examines the factors that influence public managers in the adoption of advanced practices related to Information Security Management. This research used, as the basis of assertions, Security Standard ISO 27001:2005 and theoretical model based on TAM (Technology Acceptance Model) from Venkatesh and Davis (2000). The method adopted was field research of national scope with participation of eighty public administrators from states of Brazil, all of them managers and planners of state governments. The approach was quantitative and research methods were descriptive statistics, factor analysis and multiple linear regression for data analysis. The survey results showed correlation between the constructs of the TAM model (ease of use, perceptions of value, attitude and intention to use) and agreement with the assertions made in accordance with ISO 27001, showing that these factors influence the managers in adoption of such practices. On the other independent variables of the model (organizational profile, demographic profile and managers behavior) no significant correlation was identified with the assertions of the same standard, witch means the need for expansion researches using such constructs. It is hoped that this study may contribute positively to the progress on discussions about Information Security Management, Adoption of Safety Standards and Technology Acceptance Model

Fatores críticos de sucesso como antecedentes da aceitação de um sistema de informação em uma universidade federal

In recent decades the public sector comes under pressure in order to improve its performance. The use of Information Technology (IT) has been a tool increasingly used in reaching that goal. Thus, it has become an important issue in public organizations, particularly in institutions of higher education, determine which factors influence the acceptance and use of technology, impacting on the success of its implementation and the desired organizational results. The Technology Acceptance Model - TAM was used as the basis for this study and is based on the constructs perceived usefulness and perceived ease of use. However, when it comes to integrated management systems due to the complexity of its implementation,organizational factors were added to thus seek further explanation of the acceptance of such systems. Thus, added to the model five TAM constructs related to critical success factors in implementing ERP systems, they are: support of top management, communication, training, cooperation, and technological complexity (BUENO and SALMERON, 2008). Based on the foregoing, launches the following research problem: What factors influence the acceptance and use of SIE / module academic at the Federal University of Para, from the users' perception of teachers and technicians? The purpose of this study was to identify the influence of organizational factors, and behavioral antecedents of behavioral intention to use the SIE / module academic UFPA in the perspective of teachers and technical users. This is applied research, exploratory and descriptive, quantitative with the implementation of a survey, and data collection occurred through a structured questionnaire applied to a sample of 229 teachers and 30 technical and administrative staff. Data analysis was carried out through descriptive statistics and structural equation modeling with the technique of partial least squares (PLS). Effected primarily to assess the measurement model, which were verified reliability, convergent and discriminant validity for all indicators and constructs. Then the structural model was analyzed using the bootstrap resampling technique like. In assessing statistical significance, all hypotheses were supported. The coefficient of determination (R ²) was high or average in five of the six endogenous variables, so the model explains 47.3% of the variation in behavioral intention. It is noteworthy that among the antecedents of behavioral intention (BI) analyzed in this study, perceived usefulness is the variable that has a greater effect on behavioral intention, followed by ease of use (PEU) and attitude (AT). Among the organizational aspects (critical success factors) studied technological complexity (TC) and training (ERT) were those with greatest effect on behavioral intention to use, although these effects were lower than those produced by behavioral factors (originating from TAM). It is pointed out further that the support of senior management (TMS) showed, among all variables, the least effect on the intention to use (BI) and was followed by communications (COM) and cooperation (CO), which exert a low effect on behavioral intention (BI). Therefore, as other studies on the TAM constructs were adequate for the present research. Thus, the study contributed towards proving evidence that the Technology Acceptance Model can be applied to predict the acceptance of integrated management systems, even in public. Keywords: Technology

Fatores que influenciam a intenção de compra online: aplicação de um modelo adaptado de aceitação da tecnologia para o comércio eletrônico

This research aims to understand the factors that influence intention to online purchase of consumers, and to identify between these factors those that influence the users and the nonusers of electronic commerce. Thus, it is an applied, exploratory and descriptive research, developed in a quantitative model. Data collection was done through a questionnaire administered to a sample of 194 graduate students from the Centre for Applied Social Sciences of UFRN and data analysis was performed using descriptive statistics, confirmatory factorial analysis and simple and multiple linear regression analysis. The results of descriptive statistics revealed that respondents in general and users of electronic commerce have positive perceptions of ease of use, usefulness and social influence about buying online, and intend to make purchases on Internet over the next six months. As for the non-users of electronic commerce, they do not trust the Internet to transact business, have negative perceptions of risk and social influence over purchasing online, and does not intend to make purchases on Internet over the next six months. Through confirmatory factorial analysis six factors were set up: behavioral intention, perceived ease of use, perceived usefulness, perceived risk, trust and social influence. Through multiple regression analysis, was observed that all these factors influence online purchase intentions of respondents in general, that only the social influence does not influence the intention to continue buying on the Internet from users of electronic commerce, and that only trust and social influence affect the intention to purchase online from non-users of electronic commerce. Through simple regression analysis, was found that trust influences perceptions of ease of use, usefulness and risk of respondents in general and users of electronic commerce, and that trust does not influence the perceptions of risk of non-users of electronic commerce. Finally, it was also found that the perceived ease of use influences perceived usefulness of the three groups. Given this scenario, it was concluded that it is extremely important that organizations that work with online sales know the factors that influence consumers purchasing intentions in order to gain space in their market

Aceitação e uso de ambiente virtual de aprendizagem no contexto de um curso de capacitação para servidores públicos

This study aimed to examine how students perceives the factors that may influence them to attend a training course offered in the distance virtual learning environment (VLE) of the National School of Public Administration (ENAP). Thus, as theoretical basis it was used the Unified Theory of Acceptance and Use of Technology (UTAUT), the result of an integration of eight previous models which aimed to explain the same phenomenon (acceptance/use of information technology). The research approach was a quantitative and qualitative. To achieve the study objectives were made five semi-structured interviews and an online questionnaire (websurvey) in a valid sample of 101 public employees scattered throughout the country. The technique used to the analysis of quantitative data was the structural equation modeling (SEM), by the method of Partial Least Square Path Modeling (PLS-PM). To qualitative data was the thematic content analysis. Among the results, it was found that, in the context of public service, the degree whose the individual believes that the use of an AVA will help its performance at work (performance expectancy) is a factor to its intended use and also influence its use. Among the results, it was found that the belief which the public employee has in the use of a VLE as a way to improve the performance of his work (performance expectation) was determinant for its intended use that, in turn, influenced their use. It was confirmed that, under the voluntary use of technology, the general opinion of the student s social circle (social influence) has no effect on their intention to use the VLE. The effort expectancy and facilitating conditions were not directly related to the intended use and use, respectively. However, emerged from the students speeches that the opinions of their coworkers, the ease of manipulate the VLE, the flexibility of time and place of the distance learning program and the presence of a tutor are important to their intentions to do a distance learning program. With the results, it is expected that the managers of the distance learning program of ENAP turn their efforts to reduce the impact of the causes of non-use by those unwilling to adopt voluntarily the e-learning, and enhance the potentialities of distance learning for those who are already users

Adição do resíduo de biomassa da cana-de-açúcar em pastas para cimentação de poços petrolíferos produtores de óleos pesados

The Potiguar basin has large fields of viscous oil where the used method for recovering is based on vapor injection; this operation is carried out by injecting vapor in the oilwell directly, without the protection of a revetment through thermal insulation, what causes its dilation and, consequently, cracks in the cement placed on the annular, and lost of hydraulic insulation; this crack is occasioned by the phenomenon of retrogression of the compressive resistance due to the conversion of the hydrated calcium silicate in phases calcium-rich, caused by the high temperatures in the wells, subjected to thermal recuperation. This work has evaluated the application of composite pastes with addition of residue of biomass of ground sugar-cane bagasse as anti-retrogression mineral admixture for cementation of oil-wells subjected to thermal recuperation. The addition of the mineral residue was carried out considering a relative amount of 10, 20, 30, 40 and 59% in relation to cement mass, trying to improve the microstructure of the paste, still being developed a reference paste only with cement and a paste with addition of 40% of silica flour - renowned material in the oil industry as anti-retrogression additive. Pozzolanic activity of the ash was evaluated through XRD, TG/DTG, as the resistance to compression, and it was also determined the physical and mechanical behavior of the pastes when submitted to cure at low temperatures (22 and 38º C); besides it was evaluated the behavior of the pastes when submitted to two cycles of cure at high temperature (280ºC) and pressure (7 MPa). It was verified that the ash of the sugar-cane biomass presents pozzolanic reaction and has great efficiency in decrease the permeability of the paste by filler effect, as well as that addition of ash in a relative amount of 10, 20 e 30% increases cured compressive resistance at low temperatures. It was also showed that the ash in a relative amount of 40% and 59% has very significant efficiency as anti-retrogression additive, since it prevents the decrease of compressive resistance and forms hydrated calcium silicate type xenotlita and tobermorita which have more resistance and stability in high temperatures

Estudo do processo de combustão in-situ usando poços horizontais como produtores de óleo (Toe-to-Hell Air Injection)

The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells as producers of oil, keeping vertical injection wells to inject air. This process has not yet been applied in Brazil, making it necessary, evaluation of these new technologies applied to local realities, therefore, this study aimed to perform a parametric study of the combustion process with in-situ oil production in horizontal wells, using a semi synthetic reservoir, with characteristics of the Brazilian Northeast basin. The simulations were performed in a commercial software "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), from CMG (Computer Modelling Group). The following operating parameters were analyzed: air rate, configuration of producer wells and oxygen concentration. A sensitivity study on cumulative oil (Np) was performed with the technique of experimental design, with a mixed model of two and three levels (32x22), a total of 36 runs. Also, it was done a technical economic estimative for each model of fluid. The results showed that injection rate was the most influence parameter on oil recovery, for both studied models, well arrangement depends on fluid model, and oxygen concentration favors recovery oil. The process can be profitable depends on air rate