Direct electrochemical formation of nanostructured amorphous Co(OH)2 on gold electrodes with enhanced activity for the oxygen evolution reaction.

The oxides of cobalt have recently been shown to be highly effective electrocatalysts for the oxygen evolution reaction (OER) under alkaline conditions. In general species such as Co3O4 and CoOOH have been investigated that often require an elevated temperature step during their synthesis to create crystalline materials. In this work we investigate the rapid and direct electrochemical formation of amorphous nanostructured Co(OH)2 on gold electrodes under room temperture conditions which is a highly active precursor for the OER. During the OER some conversion to crystalline Co3O4 occurs at the surface, but the bulk of the material remains amorphous. It is found that the underlying gold electrode is crucial to the materials enhanced performance and provides higher current density than can be achieved using carbon, palladium or copper support electrodes. This catalyst exhibits excellent activity with a current density of 10 mA cm-2 at an overpotential of 360 mV with a high turnover frequency of 2.1 s-1 in 1 M NaOH. A Tafel slope of 56 mV dec-1 at low overpotentials and a slope of 122 mV dec-1 at high overpotentials is consistent with the dual barrier model for the electrocatalytic evolution of oxygen. Significantly, the catalyst maintains excellent activity for up to 24 hr of continuous operation and this approach offers a facile way to create a highly effective and stable material.

The law and policy for electricity generated by renewable energy: Greening the power in three Middle Eastern jurisdictions

This thesis examines the law and policy concerning renewable energy electricity generation in Palestine, Jordan, and Abu Dhabi. The thesis gives greater attention to the promotion of solar power owing to the abundance and viability. It appears that energy security profoundly underpins the utilisation of renewable electricity, and the motivation of climate change mitigation also pays a role in the promotion of renewable energy in these jurisdictions. However, current policies and regulations are not fully able to promote the renewables in the power sector. The thesis submits that reforms of law and policy are necessary to enhance the achievement of environmental and energy goals.

Current understanding of streptococcal urinary tract infection

Group B streptococcus (GBS), also known as Streptococcus agalactiae is a Gram-positive, β-hemolytic, chain-forming bacterium and a commensal within the genital tract flora in approximately 25% of healthy adult women (Campbell et al., 2000). The organism is a leading cause of serious infection in newborns, pregnant women, and older persons with chronic medical illness (Baker et al., Edwards&Baker, 2005). In neonates GBS infection most commonly causes pneumonia, meningitis, and sepsis. In addition to maternal cervicovaginal colonization and neonatal infection that can result from vertical transmission of GBS from mothers to their infants, the bacterium can also cause urinary tract infection (UTI). The spectrum of GBS UTI includes asymptomatic bacteriuria (ABU), cystitis, pyelonephritis, urethritis, and urosepsis (Bronsema et al., 1993, Edwards&Baker, 2005, Farley et al., 1993, Lefevre et al., 1991, McKenna et al., 2003, Munoz et al., 1992, Ulett et al., 2009). GBS ABU is particularly common among pregnant women, although those most at risk for cystitis due to GBS appear to be elderly individuals (Edwards&Baker, 2005, Falagas et al., 2006, Muller et al., 2006). In addition to acute and asymptomatic UTI other invasive diseases caused by GBS infection include skin infections, bacteraemia, pneumonia, arthritis, and endocarditis (Liston et al., 1979, Patil & Martin, 2010, Tissi et al., 1997, Trivalle et al., 1998). Thus, GBS is considered unique in terms of its ability to cause a spectrum of diseases in newborns and adult humans and its ability to colonize the genital tract of healthy women in a commensal-type manner...

"Ai, noi muslimithan ei kai saa tehdä enkeleitä" : Uskonto ja uskontokasvatus monikulttuurisen päiväkodin arjessa ja kasvattajien puheessa

Tämä tutkimus on etnografisesti värittynyt kvalitatiivinen tapaustutkimus. Tutkimus kohdistuu varhaiskasvatuksen uskontokasvatukseen. Tutkimuskohteena oli eräs helsinkiläinen monikulttuurinen päiväkoti. Tutkimuksen tarkoituksena oli havainnoida päiväkodin arkea sekä haastatella päiväkodin kasvattajia (lastentarhanopettajat, lastenhoitajat) uskontoon ja uskontokasvatukseen liittyvistä kysymyksistä. Tutkimuskohteen valintaan vaikutti päiväkodissa käynnissä ollut projekti, jonka puitteissa päiväkodin uskontokasvatusta oltiin kehittämässä ns. monikulttuuristen aamuhetkien muodossa. Tarkemmat tutkimuskysymykset ovat: 1. Miten uskonto ilmenee monikulttuurisen päiväkodin arjessa? 2. Millaisia diskursseja eli puhetapoja monikulttuurisen päiväkodin kasvattajat käyttävät puhuessaan uskontoon ja uskontokasvatukseen liittyvistä kysymyksistä? Aineistonkeräämisen menetelminä käytettiin osallistuvaa havainnointia ja haastattelua. Tietoa tutkimuskohteesta kerättiin myös kasvattajatiimeille suunnatun kyselyn avulla. Vaikka tutkimuskohteena oli koko päiväkoti, niin käytännössä päiväkodin arki näyttäytyi tutkijalle yhden ryhmän toimintaan osallistumisen kautta. Tutkija vietti päiväkodissa yhteensä 28 päivää ja haastatteli 14 kasvattajaa. Kenttäpäivät jakautuivat kolmeen jaksoon aikavälillä 30.11.07–31.3.08. Ajankohdiksi oli valittu jakso ennen joulua, jakso ennen pääsiäistä ja jakso niiden välillä tammi-helmikuussa. Aineiston analyysissa ammennettiin sekä sisällönanalyysiä että diskurssianalyysiä käsittelevästä menetelmäkirjallisuudesta. Saatuja tuloksia peilattiin mm. varhaiskasvatuksen uskontokasvatusta ohjaaviin asiakirjoihin (Opetushallitus 2000; STAKES 2005) sekä Mohammed Abu-Nimerin (2001) malliin uskontojen välisen sensitiivisyyden kehittymisestä. Havainnointiaineistosta ilmenee se, miten varovaisesti, ongelmalähtöisesti ja välinpitämättömästikin kasvattajat suhtautuvat uskontokasvatukseen liittyviin kysymyksiin. Päiväkodissa aloitetut projektityöntekijän organisoimat aamunavaukset olivat kuitenkin tuomassa uudenlaista kielenkäyttöä ja myönteisen asennoitumisen mallia niin sisältöaluetta kuin eri uskontoja kohtaan. Niissä olikin havaittavissa sillanrakentamista erityisesti kristinuskon ja islamin välille. Tämä oli ymmärrettävää, sillä 55 % lapsista oli kotitaustaltaan kristittyjä ja 31 % muslimeja. Kaiken kaikkiaan päiväkodissa uskonnon ilmenemiseen liittyneet tilanteet voitiin jakaa karkeasti kolmeen luokkaan: yllättävä arki (erityisesti ruokailu ja pukeutuminen), joulun ja pääsiäisen aika sekä monikulttuuriset aamunavaukset. Haastatteluaineistosta muodostettiin viisi erilaista kasvattajien tapaa puhua uskontoon ja uskontokasvatukseen liittyvistä kysymyksistä: 1. Omaa uskontoa puolustava puhetapa. 2. Uskontojen välistä tasavertaisuutta korostava puhetapa. 3. Uskontokasvatusta vähättelevä ja kiinnostumattomuutta ilmentävä puhetapa. 4. Uskontokasvatuksen etäistävä puhetapa. 5. Uskontojen aiheuttamaa hämmennystä ilmaiseva puhetapa. Kontekstin muodostetuille puhetavoille antaa havainnointiaineisto. Kaiken kaikkiaan on havaittavissa, että kasvattajien eriasteiset henkilökohtaiset suhtautumistavat ovat vaikuttamassa kasvatustoiminnan suunnitteluun ja sen toteuttamiseen, tässä tapauksessa toteuttamatta jättämiseen. Ne myös vähentävät kasvattajien ammatillista asennoitumista uskontokasvatuksen sisältöalueeseen. Kun kokonaisuutta peilattiin Abu-Nimerin malliin, todettiin, että eri uskontojen kohtaaminen haastaa kasvattajat paljon voimakkaammin kuin eri kulttuurien kohtaaminen. Kasvattajien tulisikin mm. tunnistaa uskontojen ja katsomusten erilaisuuden itsessään aiheuttamia tunteita, jotta mahdolliset kielteiset tunteet eivät olisi vaikuttamassa kasvatustilanteissa. Mallin peilaaminen päiväkodin arkeen ja kasvattajien puhetapoihin lisää ymmärtämystä siitä, miten syvälle menevästä asiasta kulttuurien välisessä kommunikaatiossa on kyse, kun siihen lisätään uskontojen ulottuvuus - tässä tapauksessa uskontokasvatuksen ulottuvuus monikulttuurisessa ja moniuskontoisessa päiväkodissa.

The effects of humidity on tin whisker growth by immersion tin plating and tin solder dipping surface finishes

The drive to replace lead (Pb) from electronics has led to the replacement of tin (Sn) alloys as the terminal plating for electronic devices. However, the deposition of Sn based alloys as the component surface finish tends to induce Sn whisker that causes unintended electric shorts when the conductive whiskers grow across to the adjacent conductor. Internal stress is considered as the driving force that causes the growth of Sn whiskers. In this study, stress type of elevated temperature/ humidity exposure at 55C/85%RH with the storage for up to 24 months was conducted to define the acceleration factor in samples with deposition of immersion Sn plating and Sn solder dipping. The addition of Nickel (Ni) under-layer was also applied to examine the correlation to field conditions. The results showed that the whisker length increased in high humidity irrespective of the deposition methods. It was also shown that pure Sn solder dipping mitigated the whisker growth but does not completely prevent it when alloying Sn with 0.4%wtCu. Additionally, Ni under-layer was indicated to be more efficient in mitigating the growth of whisker by prolonging the incubation time for whisker formation.

Hybrid peptide hairpins containing alpha- and omega-amino acids: Conformational analysis of decapeptides with unsubstituted beta-, gamma-, and delta-residues at positions 3 and 8

The effects of inserting unsubstituted omega-amino acids into the strand segments of model beta-hairpin peptides was investigated by using four synthetic decapeptides, Boc-Lcu-Val-Xxx-Val-D-Pro-Gly-Leu-Xxx-Val-Val- OMe: pepticle 1 (Xxx=Gly), pepticle 2 (Xxx=beta Gly=beta hGly=homoglycine, beta-glycine), pepticle 3 (Xxx=gamma Abu=gamma-aminobutyric acid), pepticle 4 (Xxx= delta Ava=delta-aminovaleric acid). H-1 NMR studies (500 MHz, methanol) reveal several critical cross-strand NOEs, providing evidence for P-hairpin conformations in peptides 2-4. In peptide 3, the NMR results support the formation of the nucleating turn, however, evidence for cross-strand registry is not detected. Single-crystal X-ray diffraction studies of peptide 3 reveal a beta-hairpin conformation for both molecules in the crystallographic asymmetric unit, stabilized by four cross-strand hydrogen bonds, with the gamma Abu residues accommodated within the strands. The D-Pro-Gly segment in both molecules (A,B) adopts a type II' beta-turn conformation. The circular dichroism spectrum for peptide 3 is characterized by a negative CD band at 229 rim, whereas for peptides 2 and 4, the negative band is centered at 225 nm, suggesting a correlation between the orientation of the amide units in the strand segments and the observed CD pattern.

Structural studies of model peptides containing beta-, gamma- and delta-amino acids

The crystal structures of five model peptides Piv-Pro-Gly-NHMe (1), Piv-Pro-beta Gly-NHMe (2), Piv-Pro-beta Gly-OMe (3), Piv-Pro-delta Ava-OMe (4) and Boc-Pro-gamma Abu-OH (5) are described (Piv:pivaloyl; NHMe: N-methylamide; beta Gly:beta-glycine; OMe:O-methyl ester; delta Ava:delta-aminovaleric acid; gamma Abu:gamma-aminobutyric acid). A comparison of the structures of peptides 1 and 2 illustrates the dramatic consequences upon backbone homologation in short sequences. 1 adopts a type II beta-turn conformation in the solid state, while in 2, the molecule adopts an open conformation with the beta-residue being fully extended. Piv-Pro-beta Gly-OMe (3), which differs from 2 by replacement of the C-terminal NH group by an O-atom, adopts an almost identical molecular conformation and packing arrangement in the solid state. In peptide 4, the observed conformation resembles that determined for 2 and 3, with the delta Ava residue being fully extended. In peptide 5, the molecule undergoes a chain reversal, revealing a beta-turn mimetic structure stabilized by a C-H center dot center dot center dot O hydrogen bond.

A Low-Complexity Algorithm for Intrusion Detection in a PIR-Based Wireless Sensor Network

We present a low-complexity algorithm for intrusion detection in the presence of clutter arising from wind-blown vegetation, using Passive Infra-Red (PIR) sensors in a Wireless Sensor Network (WSN). The algorithm is based on a combination of Haar Transform (HT) and Support-Vector-Machine (SVM) based training and was field tested in a network setting comprising of 15-20 sensing nodes. Also contained in this paper is a closed-form expression for the signal generated by an intruder moving at a constant velocity. It is shown how this expression can be exploited to determine the direction of motion information and the velocity of the intruder from the signals of three well-positioned sensors.

Online Computation of Hysteresis Boundary for Constant Switching Frequency Current-Error Space-Vector-Based Hysteresis Controller for VSI-Fed IM Drives

This paper proposes a current-error space-vector-based hysteresis controller with online computation of boundary for two-level inverter-fed induction motor (IM) drives. The proposed hysteresis controller has got all advantages of conventional current-error space-vector-based hysteresis controllers like quick transient response, simplicity, adjacent voltage vector switching, etc. Major advantage of the proposed controller-based voltage-source-inverters-fed drive is that phase voltage frequency spectrum produced is exactly similar to that of a constant switching frequency space-vector pulsewidth modulated (SVPWM) inverter. In this proposed hysteresis controller, stator voltages along alpha- and beta-axes are estimated during zero and active voltage vector periods using current errors along alpha- and beta-axes and steady-state model of IM. Online computation of hysteresis boundary is carried out using estimated stator voltages in the proposed hysteresis controller. The proposed scheme is simple and capable of taking inverter upto six-step-mode operation, if demanded by drive system. The proposed hysteresis-controller-based inverter-fed drive scheme is experimentally verified. The steady state and transient performance of the proposed scheme is extensively tested. The experimental results are giving constant frequency spectrum for phase voltage similar to that of constant frequency SVPWM inverter-fed drive.

Effect of Annealing Temperature in Al 1145 Alloy Sheets on Formability, Void Coalescence, and Texture Analysis

This paper deals with a combined forming and fracture limit diagram and void coalescence analysis for the aluminum alloy Al 1145 alloy sheets of 1.8 mm thickness, annealed at four different temperatures, namely 200, 250, 300, and 350 A degrees C. At different annealing temperatures these sheets were examined for their effects on microstructure, tensile properties, formability, void coalescence, and texture. Scanning electron microscope (SEM) images taken from the fractured surfaces were examined. The tensile properties and formability of sheet metals were correlated with fractography features and void analysis. The variation of formability parameters, normal anisotropy of sheet metals, and void coalescence parameters were compared with texture analysis.

A nine-level inverter topology for medium-voltage induction motor drive with open-end stator winding

A new scheme for nine-level voltage space-vector generation for medium-voltage induction motor (IM) drives with open-end stator winding is presented in this paper. The proposed nine-level power converter topology consists of two conventional three-phase two-level voltage source inverters powered by isolated dc sources and six floating-capacitor-connected H-bridges. The H-bridge capacitor voltages are effectively maintained at the required asymmetrical levels by employing a space vector modulation (SVPWM) based control strategy. An interesting feature of this topology is its ability to function in five-or three-level mode, in the entire modulation range, at full-power rating, in the event of any failure in the H-bridges. This feature significantly improves the reliability of the proposed drive system. Each leg of the three-phase two-level inverters used in this topology switches only for a half cycle of the reference voltage waveform. Hence, the effective switching frequency is reduced by half, resulting in switching loss reduction in high-voltage devices. The transient as well as the steady-state performance of the proposed nine-level inverter-fed IM drive system is experimentally verified in the entire modulation range including the overmodulation region.

Experimental investigation of forming limit, void coalescence and crystallographic textures of aluminum alloy 8011 sheet annealed at various temperatures

In this work, a combined forming and fracture limit diagram, fractured void coalescence and texture analysis have been experimentally evaluated for the commercially available aluminum alloy Al 8011 sheet annealed at different temperatures viz. 200 degrees C, 250 degrees C, 300 degrees C and 350 degrees C. The sheets were examined at different annealing temperatures on microstructure, tensile properties, formability and void coalescence. The fractured surfaces of the formed samples were examined using scanning electron microscope (SEM) and these images were correlated with fracture behavior and formability of sheet metals. Formability of Al 8011 was studied and examined at various annealing temperatures using their bulk X-ray crystallographic textures and ODF plots. Forming limit diagrams, void coalescence parameters and crystallographic textures were correlated with normal anisotropy of the sheet metals annealed at different temperatures. (C) 2013 Politechnika Wroclawska. Published by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

CTFS-ForestGEO: a worldwide network monitoring forests in an era of global change

Global change is impacting forests worldwide, threatening biodiversity and ecosystem services including climate regulation. Understanding how forests respond is critical to forest conservation and climate protection. This review describes an international network of 59 long-term forest dynamics research sites (CTFS-ForestGEO) useful for characterizing forest responses to global change. Within very large plots (median size 25ha), all stems 1cm diameter are identified to species, mapped, and regularly recensused according to standardized protocols. CTFS-ForestGEO spans 25 degrees S-61 degrees N latitude, is generally representative of the range of bioclimatic, edaphic, and topographic conditions experienced by forests worldwide, and is the only forest monitoring network that applies a standardized protocol to each of the world's major forest biomes. Supplementary standardized measurements at subsets of the sites provide additional information on plants, animals, and ecosystem and environmental variables. CTFS-ForestGEO sites are experiencing multifaceted anthropogenic global change pressures including warming (average 0.61 degrees C), changes in precipitation (up to +/- 30% change), atmospheric deposition of nitrogen and sulfur compounds (up to 3.8g Nm(-2)yr(-1) and 3.1g Sm(-2)yr(-1)), and forest fragmentation in the surrounding landscape (up to 88% reduced tree cover within 5km). The broad suite of measurements made at CTFS-ForestGEO sites makes it possible to investigate the complex ways in which global change is impacting forest dynamics. Ongoing research across the CTFS-ForestGEO network is yielding insights into how and why the forests are changing, and continued monitoring will provide vital contributions to understanding worldwide forest diversity and dynamics in an era of global change.

The crystal structure of a lectin from Butea monosperma: Insight into its glycosylation and binding of ligands

Crystal structure of a lectin purified from Butea monosperma seeds was determined by Molecular Replacement method. Its primary structure was determined by Tandem Mass Spectroscopy and electron density maps from X-ray diffraction data. Its quaternary structure was tetrameric, formed of two monomers, alpha and beta, beta appearing as truncated alpha. The occurrence of two tetramers in the asymmetric unit of the crystal might be a consequence of asymmetric contacts due to difference in glycosylation and variable loops structures, to form an `octamer-structure'. The crystal structure showed binding pockets for gamma Abu, having a proposed role in plant defense, at the interface of canonical dimer-partners. Hemagglutination studies, enzyme kinetics, isothermal titration calorimetry and molecular dynamics showed that the lectin is specific to N-acetyl D-galactosamine, galactose and lactose in decreasing order, and alpha-amylase inhibitor. (C) 2014 Elsevier B.V. All rights reserved.

Performance analysis of 1200 kV ceramic disc insulator string under normal and faulted conditions

In the recent years there has been a considerable increase in demand for the electrical power requirement in our country. Presently the transmission system voltages has increased to 765 kV ac and 800kV dc, keeping in view of the future demand experimentation and simulation studies for 1200 kV ac and 1100kV dc transmission are under progress. In the present study an attempt is made to compute the surface potential, electric field across the string of ceramic disc insulators used for 1200kV ac systems. The studies are carried out under normal, polluted conditions and for the case of insulator string containing faulty discs. A computer code using surface charge simulation method (SCSM) is developed for the present analysis. Also a new technique which enhances the surface potential and electric field strength for the existing ceramic disc insulators is presented.