Análise microestrutural e caracterização mecânica do aço AISI 4350 submetido a diferentes tratamentos térmicos

The multiphase steels are gaining increasing attention in scientific studies because of the different mechanical and microstructural properties that the material can achieve under different thermomechanical and heat treatments that can be submitted. In the present study, it was made a microstructural study thru the triple attack technic associated with optical microscopy and mechanical characterization of medium carbon AISI 4350 steel thru a tensile strength test, subjected to three routes of heat treatment: annealing, quenching and tempering and isothermal annealing. It was verified the predominance of ferrite-perlite constituent in the specimen annealed, martensitic in the quenched and tempered specimen and bainitic in the annealed isothermally specimen. The annealed material showed a higher ductility, while the hardened and tempered specimen showed the highest hardness and ultimately the bainitic specimen showed a combination of the two abovementioned mechanical properties. Thus, we proved that the multiphase steel SAE 4350 can be a versatile material with great potential for various industrial applications

Análise do perfil de dureza e microestrutura de um aço forjado AISI A2 submetido a tratamento térmico com resfriamento em água

Due to the large use of steel in several processes around the world, there is the increasingly concern to find new materials and/or optimization and improvement of the processes, as the need to reduce the cost and a productivity increase in the primary industry, such as the siderurgy. The rolling is the most used mechanical process in the world and therefore is required the development of new tools in high volume and with optimum characteristics to support the market demand. Forged rolls used are for rolling. These rolls have heat treatment that has the purpose to achieve the appropriated mechanical properties to support the variables of the rolling process. The objective of this work is to analyze the hardness profile and the microstructure a tool steel similar to AISI A2, forged in an opened die process and submitted to heat treatment with water-cooling. The results allowed plotting a hardness profile and performing a microstructure analysis, and whereby to confirm that the heat treatment is not a quenching, but it is a material beneficiation by the hardening of superficial layer, since there is no martensitic microstructure. Therefore, this paper provides the support to future studies about the possibility to perform enhancements in this thermal heat made in the rolls produced at Gerdau Plant in Pindamonhangaba

Application of Mossbauer spectroscopy to the study of corrosion resistance in NaCl solution of plasma nitrided AISI 316L stainless steel

Corrosion research in steels is one of the areas in which Mossbauer spectroscopy has become a required analytical technique, since it is a powerful tool for both identifying and quantifying distinctive phases (which contain Fe) with accuracy. In this manuscript, this technique was used to the study of corrosion resistance of plasma nitrided AISI 316L samples in the presence of chloride anions. Plasma nitriding has been carried out using dc glow-discharge, nitriding treatments, in medium of 80 vol.% H-2 and 20 vol.% N-2, at 673 K, and at different time intervals: 2, 4, and 7 h. Treated samples were characterized by means of phase composition and morphological analysis, and electrochemical tests in NaCl aerated solution in order to investigate the influence of treatment time on the microstructure and the corrosion resistance, proved by conversion electron Mossbauer spectroscopy (CEMS), glancing angle X-ray diffraction (GAXRD), scanning electron microscopy (SEM) and potentiodynamic polarization. A modified layer of about 8 gin was observed for all the nitrided samples, independently of the nitriding time. A metastable phase, S phase or gamma(N), was produced. It seems to be correlated with gamma`-Fe-4 N phase. If the gamma(N) fraction decreases, the gamma` fraction increases. The gamma(N) magnetic nature was analyzed. When the nitriding time increases, the results indicate that there is a significant reduction in the relative fraction of the magnetic gamma(N) (in) phase. In contrast, the paramagnetic gamma(N) (p) phase increases. The GAXRD analysis confirms the Mossbauer results, and it also indicates CrN traces for the sample nitrided for 7 h. Corrosion results demonstrate that time in the plasma nitriding treatment plays an important role for the corrosion resistance. The sample treated for 4 h showed the best result of corrosion resistance. It seems that the epsilon/gamma` fraction ratio plays an important role in thin corrosion resistance since this sample shows the maximum value for this ratio. (c) 2008 Published by Elsevier B.V.

Magnetic Barkhausen emission in lightly deformed AISI 1070 steel

The Magnetic Barkhausen Noise (MBN) technique can evaluate both micro- and macro-residual stresses, and provides indication about the relevance of contribution of these different stress components. MBN measurements were performed in AISI 1070 steel sheet samples, where different strains were applied. The Barkhausen emission is also analyzed when two different sheets, deformed and non-deformed, are evaluated together. This study is useful to understand the effect of a deformed region near the surface on MBN. The low permeability of the deformed region affects MBN, and if the deformed region is below the surface the magnetic Barkhausen signal increases. (C) 2011 Elsevier B.V. All rights reserved.

Effects of cryogenic and stress relief treatments on temper carbide precipitation in AISI D2 tool steel

The effects of cryogenic and stress relief treatments on temper carbide precipitation in the cold work tool steel AISI D2 were studied. For the cryogenic treatment the temperature was −196°C and the holding time was 2, 24 or 30 h. The stress relief heat treatment was carried at 130°C/90 min, when applied. All specimens were compared to a standard thermal cycle. Specimens were studied using metallographic characterisation, X-ray diffraction and thermoelectric power measurements. The metallographic characterisation used SEM (scanning electron microscopy) and SEM-FEG (SEM with field emission gun), besides OM (optical microscopy). No variation in the secondary carbides (micrometre sized) precipitation was found. The temper secondary carbides (nanosized) were found to be more finely dispersed in the matrix of the specimens with cryogenic treatment and without stress relief. The refinement of the temper secondary carbides was attributed to a possible in situ carbide precipitation during tempering.

Influence of HSM cutting parameters on the surface integrity characteristics of hardened AISI H13 steel

The purpose of this study is to evaluate the influence of the cutting parameters of high-speed machining milling on the characteristics of the surface integrity of hardened AISI H13 steel. High-speed machining has been used intensively in the mold and dies industry. The cutting parameters used as input variables were cutting speed (v c), depth of cut (a p), working engagement (a e) and feed per tooth (f z ), while the output variables were three-dimensional (3D) workpiece roughness parameters, surface and cross section microhardness, residual stress and white layer thickness. The subsurface layers were examined by scanning electron and optical microscopy. Cross section hardness was measured with an instrumented microhardness tester. Residual stress was measured by the X-ray diffraction method. From a statistical standpoint (the main effects of the input parameters were evaluated by analysis of variance), working engagement (a e) was the cutting parameter that exerted the strongest effect on most of the 3D roughness parameters. Feed per tooth (f z ) was the most important cutting parameter in cavity formation. Cutting speed (v c) and depth of cut (a p) did not significantly affect the 3D roughness parameters. Cutting speed showed the strongest influence on residual stress, while depth of cut exerted the strongest effect on the formation of white layer and on the increase in surface hardness.

Analisi del comportamento a caldo dell'acciaio AISI - H11 per la stima della vita utile di matrici per estrusione

The effect of process parameters on the creep-fatigue behavior of a hot-work tool steel for aluminum extrusion die was investigated through a technological test in which the specimen geometry resembled the mandrel of a hollow extrusion die. Tests were performed on a Gleeble thermomechanical simulator by heating the specimen using joule’s effect and by applying cyclic loading up to 6.30 h or till specimen failure. Displacements during the tests at 380, 490, 540 and 580°C and under the average stresses of 400, 600 and 800 MPa were determined. In the first set of test a dwell time of 3 min was introduced during each of the tests to understand the creep behavior. The results showed that the test could indeed physically simulate the cyclic loading on the hollow die during extrusion and reveal all the mechanisms of creep-fatigue interaction. In the second set a pure fatigue laod were induced and in the third set a static creep load were induced in the specimens. Furher type of tests, finite element and microstructural analysis were presented.

Sistemi multistrato per il miglioramento del comportamento tribologico dell'acciaio inossidabile AISI 316L: cementazione a bassa temperatura seguita da deposizione PACVD di carbonio amorfo (a-C:H)

Gli acciai inossidabili austenitici presentano ottime caratteristiche che li rendono ideali in tutti quei settori in cui è richiesta un’elevata resistenza alla corrosione associata a caratteristiche estetiche e funzionali. L’acciaio AISI 316L risulta essere uno dei più studiati ed utilizzati, specie nell’industria alimentare e farmaceutica, dove leapparecchiature debbono poter essere sottoposte ad aggressive procedure di sanificazione. Tuttavia, la modesta resistenza meccanica e la bassa durezza superficiale di questo acciaio determinano un comportamento non soddisfacente dal punto di vista dell’usura da strisciamento in assenza di lubrificanti, situazione che si verifica sovente in molti macchinari dedicati a queste industrie. Tra le varie soluzioni, studiate per migliorare il suo comportamento tribologico, la cementazione a bassa temperatura (LowTemperature Carburizing, LTC) seguita dalla deposizione PE-CVD (Plasma-Enhanced Chemical Vapour Deposition) di un rivestimento di carbonio amorfo idrogenato (a-C:H), sembra essere molto promettente. In questo lavoro vengono analizzate le caratteristiche tribologiche dell’acciaio AISI 316L cementato a bassa temperatura e rivestito di carbonio amorfo idrogenato, tramite prove tribologiche di strisciamento non lubrificato in geometria di contatto pattino su cilindro. Sono state verificate, inoltre, le caratteristiche microstrutturali e meccaniche superficiali del rivestimento multistrato LTC/a-C:H tramite osservazioni morfologiche/topografiche, analisi in spettroscopia micro-Raman e misure di indentazione strumentata sulle superfici rivestite, seguite da analisi metallografia e misura dei profili di microdurezza Vickers in sezione trasversale. I risultati ottenuti dimostrano che, ai fini di contenere l’effetto negativo legato all’aumento di rugosità dovuto al trattamento LTC, è opportuno effettuare una lucidatura precedente al trattamento stesso, poiché effettuandola successivamente si rischierebbe dicomprometterne lo strato efficace. Inoltre, si osserva come il trattamento LTC incrementi le capacità del substrato di supportare il rivestimento a-C:H, portando ad un miglioramento delle prestazioni tribologiche, nelle prove di strisciamento non lubrificato. Infine, si dimostra come l’utilizzo di un rivestimento a base di carbonio amorfo idrogenato adeguatamente supportato permetta una riduzione dell’attrito (di oltre cinque volte) e dell’usura (di circa dieci ordini di grandezza) rispetto ai corrispondenti materiali non rivestiti.

Valutazione degli effetti dei processi tecnologici sulla resistenza al pitting in soluzione salina di acciao aisi 316L saldato

L'obiettivo di questa tesi è lo studio del comportamento a corrosione per pitting dell’acciaio inox AISI 316L saldato TIG e sottoposto a differenti cicli di laminazione e di ripristino del film passivo.

Sēfer Miṣwôt han-nāšîm : ein zehr hipš froien sefer abr niṭ wi alr hnd ṭaisši bichlein ... zundrn gor dinlich tzu der nešome ... wi zich ein fromi froie in iri gvoṭni 3 mitzwes nido ḥale we-hadlokes ner for halṭin zol ...

[Benjamin Aaron Ben-Abraham Slonik]