Floristic composition, diversity and structure of the "cerrado" sensu stricto on rocky soils in northern Goiás and southern Tocantins, Brazil

The "cerrado" sensu stricto is a savanna woodland physiognomy which occupies most of central Brazil, with the degree of canopy cover varying from 10% to 60% at a site with trees reaching up to seven meters high. It occurs mostly on deep and well-drained soils but can also be found on shallower ones. The diversity and structure of the "cerrado" sensu stricto on shallow and rocky Cambisols and Litosols were studied here. Sixteen 20 x 50 m² plots were sampled in a random design over patches of this vegetation in northern Goiás State and southern Tocantins. All stems from 5 cm diameter at 30 cm from the ground level were measured. Vouchers were collected and deposited at the IBGE herbarium. A total of 87 species in 65 genera and 33 families were found. Diversity index was 2.87 nats ind-1, density was 836 stems ha-1 with a basal area of 8.4374 m² ha-1. Sørensen's index indicated higher similarities between plots at the same site indicating a geographical gradient influencing the floristic composition of the "cerrado" sensu stricto on rocky soils. Czekanowski's index confirmed this trend. TWINSPAN classification final groups were defined by preferential species of more fertile soils, in opposition to those typical of dystrophic soils and to common species to gallery forests occurring on sloping terrains with gullies.

Studies on the intrinsic nervous system of the wild rodent Calomys callosus digestive tract. II: The submucous plexus

The submucous plexus of the normal small and large intestine of Calomys callosus was studied by NADH and AChE histochemical techniques and by transmission and scanning electron microscopy. The plexus contains (mean ± SD) 7,488 ± 293 neurons/cm2 in the duodenum, 5,611 ± 836 in the jejunum, 2,741 ± 360 in the ileum, 3,067 ± 179 in the cecum, and 3,817 ± 256 in the proximal colon. No ganglia or nerve cell bodies were seen in the esophagus, stomach, distal colon or rectum. The neurons are pear-shaped with a round or oval nucleus and the neuronal cell profile areas were larger in the large intestine than in the small intestine. Most of the neurons display intense AChE activity in the cytoplasm. AChE-positive nerve fibers are present in a primary meshwork of large nerve bundles and in a secondary meshwork of finer nerve bundles. At the ultrastructural level, the ganglia are irregular in shape and covered with fibroblast-like cells. The nucleoplasm of the neurons is finely granular with a few condensations of chromatin attached to the nuclear envelope. In the neuropil numerous varicosities filled with vesicles of different size and electron densities are seen. The pre- and post-synaptic membrane thickenings are asymmetric. Characteristic glial cells with oval nuclei and few organelles are numerous. These data provide a detailed description of this submucosal meshwork.

Aging reduces the primary humoral response and the in vitro cytokine production in mice

Aging is accompanied by a decrease in several physiological functions that make older individuals less responsive to environmental challenges. In the present study, we analyzed the immune response of female BALB/c mice (N = 6) of different ages (from 2 to 96 weeks) and identified significant age-related alterations. Immunization with hapten-protein (trinitrophenyl-bovine serum albumin) conjugates resulted in lower antibody levels in the primary and secondary responses of old mice (72 weeks old). Moreover, young mice (2, 16, and 32 weeks old) maintained specific antibodies in their sera for longer periods after primary immunization than did old mice. However, a secondary challenge efficiently induced memory in old mice, as shown by the increased antibody levels in their sera. The number of CD4+ and CD8+ T cells in the spleen increased until 8 weeks of age but there was no change in the CD4+/CD8+ ratio with aging. Splenic T cells from old mice that had or had not been immunized were less responsive to concanavalin-A and showed reduced cytokine production compared to young mice (IL-2: 57-127 vs 367-1104 pg/mL, IFN-g: 2344-12,836 vs 752-23,106 pg/mL and IL-10: 393-2172 vs 105-2869 pg/mL in old and young mice, respectively). These data suggest that there are significant changes in the organization of the immune system throughout life. However, the relevance of these alterations for the functioning of the immune system is unknown.

MMP-1/PAR-1 signal transduction axis and its prognostic impact in esophageal squamous cell carcinoma

The matrix metalloprotease-1 (MMP-1)/protease-activated receptor-1 (PAR-1) signal transduction axis plays an important role in tumorigenesis. To explore the expression and prognostic value of MMP-1 and PAR-1 in esophageal squamous cell carcinoma (ESCC), we evaluated the expression of two proteins in resected specimens from 85 patients with ESCC by immunohistochemistry. Sixty-two (72.9%) and 58 (68.2%) tumors were MMP-1- and PAR-1-positive, respectively, while no significant staining was observed in normal esophageal squamous epithelium. MMP-1 and PAR-1 overexpression was significantly associated with tumor node metastasis (TNM) stage and regional lymph node involvement. Patients with MMP-1- and PAR-1-positive tumors, respectively, had poorer disease-free survival (DFS) than those with negative ESCC (P = 0.002 and 0.003, respectively). Univariate analysis showed a significant relationship between TNM stage [hazard ratio (HR) = 2.836, 95% confidence interval (CI) = 1.866-4.308], regional lymph node involvement (HR = 2.955, 95%CI = 1.713-5.068), MMP-1 expression (HR = 2.669, 95%CI = 1.229-6.127), and PAR-1 expression (HR = 1.762, 95%CI = 1.156-2.883) and DFS. Multivariate analysis including the above four parameters identified TNM stage (HR = 2.035, 95%CI = 1.167-3.681), MMP-1 expression (HR = 2.109, 95%CI = 1.293-3.279), and PAR-1 expression (HR = 1.967, 95%CI = 1.256-2.881) as independent and significant prognostic factors for DFS. Our data suggest for the first time that MMP-1 and PAR-1 were both overexpressed in ESCC and are novel predictors of poor patient prognosis after curative resection. The MMP-1/PAR-1 signal transduction axis might be a new therapeutic target for future therapies tailored against ESCC.

Percent body fat is a better predictor of cardiovascular risk factors than body mass index

The objective of the present study was to evaluate the predictive values of percent body fat (PBF) and body mass index (BMI) for cardiovascular risk factors, especially when PBF and BMI are conflicting. BMI was calculated by the standard formula and PBF was determined by bioelectrical impedance analysis. A total of 3859 ambulatory adult Han Chinese subjects (2173 males and 1686 females, age range: 18-85 years) without a history of cardiovascular diseases were recruited from February to September 2009. Based on BMI and PBF, they were classified into group 1 (normal BMI and PBF, N = 1961), group 2 (normal BMI, but abnormal PBF, N = 381), group 3 (abnormal BMI, but normal PBF, N = 681), and group 4 (abnormal BMI and PBF, N = 836). When age, gender, lifestyle, and family history of obesity were adjusted, PBF, but not BMI, was correlated with blood glucose and lipid levels. The odds ratio (OR) and 95% confidence interval (CI) for cardiovascular risk factors in groups 2 and 4 were 1.88 (1.45-2.45) and 2.06 (1.26-3.35) times those in group 1, respectively, but remained unchanged in group 3 (OR = 1.32, 95%CI = 0.92-1.89). Logistic regression models also demonstrated that PBF, rather than BMI, was independently associated with cardiovascular risk factors. In conclusion, PBF, and not BMI, is independently associated with cardiovascular risk factors, indicating that PBF is a better predictor.

Feasibility of industrial implementation of laser cutting into paper making machine

Laser cutting implementation possibilities into paper making machine was studied as the main objective of the work. Laser cutting technology application was considered as a replacement tool for conventional cutting methods used in paper making machines for longitudinal cutting such as edge trimming at different paper making process and tambour roll slitting. Laser cutting of paper was tested in 70’s for the first time. Since then, laser cutting and processing has been applied for paper materials with different level of success in industry. Laser cutting can be employed for longitudinal cutting of paper web in machine direction. The most common conventional cutting methods include water jet cutting and rotating slitting blades applied in paper making machines. Cutting with CO2 laser fulfils basic requirements for cutting quality, applicability to material and cutting speeds in all locations where longitudinal cutting is needed. Literature review provided description of advantages, disadvantages and challenges of laser technology when it was applied for cutting of paper material with particular attention to cutting of moving paper web. Based on studied laser cutting capabilities and problem definition of conventional cutting technologies, preliminary selection of the most promising application area was carried out. Laser cutting (trimming) of paper web edges in wet end was estimated to be the most promising area where it can be implemented. This assumption was made on the basis of rate of web breaks occurrence. It was found that up to 64 % of total number of web breaks occurred in wet end, particularly in location of so called open draws where paper web was transferred unsupported by wire or felt. Distribution of web breaks in machine cross direction revealed that defects of paper web edge was the main reason of tearing initiation and consequent web break. The assumption was made that laser cutting was capable of improvement of laser cut edge tensile strength due to high cutting quality and sealing effect of the edge after laser cutting. Studies of laser ablation of cellulose supported this claim. Linear energy needed for cutting was calculated with regard to paper web properties in intended laser cutting location. Calculated linear cutting energy was verified with series of laser cutting. Practically obtained laser energy needed for cutting deviated from calculated values. This could be explained by difference in heat transfer via radiation in laser cutting and different absorption characteristics of dry and moist paper material. Laser cut samples (both dry and moist (dry matter content about 25-40%)) were tested for strength properties. It was shown that tensile strength and strain break of laser cut samples are similar to corresponding values of non-laser cut samples. Chosen method, however, did not address tensile strength of laser cut edge in particular. Thus, the assumption of improving strength properties with laser cutting was not fully proved. Laser cutting effect on possible pollution of mill broke (recycling of trimmed edge) was carried out. Laser cut samples (both dry and moist) were tested on the content of dirt particles. The tests revealed that accumulation of dust particles on the surface of moist samples can take place. This has to be taken into account to prevent contamination of pulp suspension when trim waste is recycled. Material loss due to evaporation during laser cutting and amount of solid residues after cutting were evaluated. Edge trimming with laser would result in 0.25 kg/h of solid residues and 2.5 kg/h of lost material due to evaporation. Schemes of laser cutting implementation and needed laser equipment were discussed. Generally, laser cutting system would require two laser sources (one laser source for each cutting zone), set of beam transfer and focusing optics and cutting heads. In order to increase reliability of system, it was suggested that each laser source would have double capacity. That would allow to perform cutting employing one laser source working at full capacity for both cutting zones. Laser technology is in required level at the moment and do not require additional development. Moreover, capacity of speed increase is high due to availability high power laser sources what can support the tendency of speed increase of paper making machines. Laser cutting system would require special roll to maintain cutting. The scheme of such roll was proposed as well as roll integration into paper making machine. Laser cutting can be done in location of central roll in press section, before so-called open draw where many web breaks occur, where it has potential to improve runability of a paper making machine. Economic performance of laser cutting was done as comparison of laser cutting system and water jet cutting working in the same conditions. It was revealed that laser cutting would still be about two times more expensive compared to water jet cutting. This is mainly due to high investment cost of laser equipment and poor energy efficiency of CO2 lasers. Another factor is that laser cutting causes material loss due to evaporation whereas water jet cutting almost does not cause material loss. Despite difficulties of laser cutting implementation in paper making machine, its implementation can be beneficial. The crucial role in that is possibility to improve cut edge strength properties and consequently reduce number of web breaks. Capacity of laser cutting to maintain cutting speeds which exceed current speeds of paper making machines what is another argument to consider laser cutting technology in design of new high speed paper making machines.

Le Petit journal. Supplément du dimanche

1906/11/25 (Numéro 836).

L'Écho de Paris

1886/06/26 (Numéro 836).

欽定大清會典事例Qin ding da qing hui dian shi li.Statuts de la dynastie des Qing : règlements détaillés.

Contient : Conseil de la Maison impériale, livres 1 à 8 ; Grande Chancellerie, Grand Conseil, livres 9 à 13 ; Ministère des Fonctionnaires civils, livres 14 à 127 ; Ministère du Cens, livres 128 à 232 ; Ministère des Rites, livres 233 à 409 ; Section de la Musique, livres 410 à 426 ; Ministère de l'Armée, livres 427 à 583 ; Ministère des Châtiments, livres 584 à 660 ; Ministère des Travaux, livres 661 à 725 ; Cour des Tributaires, livres 726 à 753 ; Cour des Censeurs, Académie, Bureau d'Astrologie, etc., livres 754 à 831 ; Gardes du corps, Préposés aux équipages, livres 832 à 836 ; les huit Bannières, livres 837 à 884 ; Intendance de la Cour, livres 885 à 920

Informe ejecutivo infopag. Comparativo y evolución de quejas 2011 2010

Banco del conocimiento

La inversión pública y calidad de vida en las localidades de Bogotá. Localidad Engativa.

Gestión del conocimiento

Earp Residence

The five-storey building consists of 255 furnished, single-rooms with a bathroom shared between every two rooms, as well as a lounge on each floor. It is named after the University's second and longest-serving President. Dr. Earp was President from 1974-1988, in addition to being Acting President during the 1971-72 and 1973-1974 academic years.