Stratospheric temperature trends: impact of ozone variability and the QBO

In most climate simulations used by the Intergovernmental Panel on Climate Change 2007 fourth assessment report, stratospheric processes are only poorly represented. For example, climatological or simple specifications of time-varying ozone concentrations are imposed and the quasi-biennial oscillation (QBO) of equatorial stratospheric zonal wind is absent. Here we investigate the impact of an improved stratospheric representation using two sets of perturbed simulations with the Hadley Centre coupled ocean atmosphere model HadGEM1 with natural and anthropogenic forcings for the 1979–2003 period. In the first set of simulations, the usual zonal mean ozone climatology with superimposed trends is replaced with a time series of observed zonal mean ozone distributions that includes interannual variability associated with the solar cycle, QBO and volcanic eruptions. In addition to this, the second set of perturbed simulations includes a scheme in which the stratospheric zonal wind in the tropics is relaxed to appropriate zonal mean values obtained from the ERA-40 re-analysis, thus forcing a QBO. Both of these changes are applied strictly to the stratosphere only. The improved ozone field results in an improved simulation of the stepwise temperature transitions observed in the lower stratosphere in the aftermath of the two major recent volcanic eruptions. The contribution of the solar cycle signal in the ozone field to this improved representation of the stepwise cooling is discussed. The improved ozone field and also the QBO result in an improved simulation of observed trends, both globally and at tropical latitudes. The Eulerian upwelling in the lower stratosphere in the equatorial region is enhanced by the improved ozone field and is affected by the QBO relaxation, yet neither induces a significant change in the upwelling trend.

Easterly wave disturbances over Northeast Brazil: an observational analysis

This paper aims to identify the circulation associated with Easterly Wave Disturbances (EWDs) that propagate toward the Eastern Northeast Brazil (ENEB) and their impact on the rainfall over ENEB during 2006 and 2007 rainy seasons (April–July). The EWDs identification and trajectory are analyzed using an automatic tracking technique (TracKH). The EWDs circulation patterns and their main features were obtained using the composite technique. To evaluate the TracKH efficiency, a validation was done by comparing the EWDs number tracked against observed cases obtained from an observational analysis. The mean characteristics of EWDs are 5.5-day period, propagation speed of ~9.5 m·s−1, and a 4500 km wavelength. A synoptic analysis shows that between days −2 d and 0 d, the low level winds presented cyclonic relative vorticity and convergence anomalies both in 2006 and 2007. The EWDs signals are strongest at low levels. The EWDs propagation is associated with relative humidity and precipitation positive anomalies and OLR and omega negative anomalies. The EWDs tracks are seen over all ENEB and their lysis occurs between the ENEB and marginally inside the continent. The tracking captured 71% of EWDs in all periods, indicating that an objective analysis is a promising method for EWDs detection.

Proteomics of the neurotoxic fraction from the sea anemone Bunodosoma cangicum venom: Novel peptides belonging to new classes of toxins

In contrast to the many studies on the venoms of scorpions, spiders, snakes and cone snails, tip to now there has been no report of the proteomic analysis of sea anemones venoms. In this work we report for the first time the peptide mass fingerprint and some novel peptides in the neurotoxic fraction (Fr III) of the sea anemone Bunodosoma cangicum venom. Fr III is neurotoxic to crabs and was purified by rp-HPLC in a C-18 column, yielding 41 fractions. By checking their molecular masses by ESI-Q-Tof and MALDI-Tof MS we found 81 components ranging from near 250 amu to approximately 6000 amu. Some of the peptidic molecules were partially sequenced through the automated Edman technique. Three of them are peptides with near 4500 amu belonging to the class of the BcIV, BDS-I, BDS-II, APETx1, APETx2 and Am-II toxins. Another three peptides represent a novel group of toxins (similar to 3200 amu). A further three molecules (similar to similar to 4900 amu) belong to the group of type 1 sodium channel neurotoxins. When assayed over the crab leg nerve compound action potentials, one of the BcIV- and APETx-like peptides exhibits an action similar to the type 1 sodium channel toxins in this preparation, suggesting the same target in this assay. On the other hand one of the novel peptides, with 3176 amu, displayed an action similar to potassium channel blockage in this experiment. In summary, the proteomic analysis and mass fingerprint of fractions from sea anemone venoms through MS are valuable tools, allowing us to rapidly predict the occurrence of different groups of toxins and facilitating the search and characterization of novel molecules without the need of full characterization of individual components by broader assays and bioassay-guided purifications. It also shows that sea anemones employ dozens of components for prey capture and defense. (C) 2008 Elsevier Inc. All rights reserved.

How does a riverine setting affect the lifestyle of shellmound builders in Brazil?

The contact of inland and coastal prehistoric groups in Brazil is believed to have been restricted to regions with no geographical barrier, as is the case in the Ribeira de Iguape valley. The inland osteological collection from the riverine shellmound Moraes (5800-4500 BP) represents a unique opportunity to test this assumption for this region. Despite cultural similarities between riverine and coastal shellmounds, important ecological and site distribution differences are expected to impact on lifestyle. The purpose of this study is thus to document and interpret health and lifestyle indicators in Moraes in comparison to coastal shellmound groups. Specifically we test if the rare evidence of fish and mollusc remains in the riverine shellmound led to (a) higher caries rates and (b) lower auditory exostosis frequency and (c) if the small size of the riverine shellmound translates into reduced demographic density and thus rarity of communicable infectious diseases. Of the three hypotheses, (a) was confirmed, (b) was rejected and (c) was partly rejected. Bioanthropological similarities between Moraes and coastal shellmounds include auditory exostoses with equally high frequencies; significantly more frequent osteoarthritis in upper than in lower limbs; cranial and dental morphological affinities and low frequencies of violent trauma. However, there are also important differences: Moraes subsisted on a much broader protein diet and consumed more cariogenic food, but showed a stature even shorter than coastal groups. Thus, despite the contact also suggested by treponematoses in both site types, there was enough time for the people at the riverine site to adapt to local conditions. (c) 2008 Elsevier GmbH. All rights reserved.

Photovoltaic System Design for a Contaminated Area in Falun – Comparison of South and East- West Layout

In this thesis the solar part of a large grid-connected photovoltaic system design has been done. The main purpose was to size and optimize the system and to present figures helping to evaluate the prospective project rationality, which can potentially be constructed on a contaminated area in Falun. The methodology consisted in PV market study and component selection, site analysis and defining suitable area for solar installation; and system configuration optimization based on PVsyst simulations and Levelized Cost of Energy calculations. The procedure was mainly divided on two parts, preliminary and detailed sizing. In the first part the objective was complex, which included the investigation of the most profitable component combination and system optimization due to tilt and row distance. It was done by simulating systems with different components and orientations, which were sized for the same 100kW inverter in order to make a fair comparison. For each simulated result a simplified LCOE calculation procedure was applied. The main results of this part show that with the price of 0.43 €/Wp thin-film modules were the most cost effective solution for the case with a great advantage over crystalline type in terms of financial attractiveness. From the results of the preliminary study it was possible to select the optimal system configuration, which was used in the detailed sizing as a starting point. In this part the PVsyst simulations were run, which included full scale system design considering near shadings created by factory buildings. Additionally, more complex procedure of LCOE calculation has been used here considered insurances, maintenance, time value of money and possible cost reduction due to the system size. Two system options were proposed in final results; both cover the same area of 66000 m2. The first one represents an ordinary South faced design with 1.1 MW nominal power, which was optimized for the highest performance. According to PVsyst simulations, this system should produce 1108 MWh/year with the initial investment of 835,000 € and 0.056 €/kWh LCOE. The second option has an alternative East-West orientation, which allows to cover 80% of occupied ground and consequently have 6.6 MW PV nominal power. The system produces 5388 MWh/year costs about 4500,000 € and delivers electricity with the same price of 0.056 €/kWh. Even though the EW solution has 20% lower specific energy production, it benefits mainly from lower relative costs for inverters, mounting and annual maintenance expenses. After analyzing the performance results, among the two alternatives none of the systems showed a clear superiority so there was no optimal system proposed. Both, South and East-West solutions have own advantages and disadvantages in terms of energy production profile, configuration, installation and maintenance. Furthermore, the uncertainty due to cost figures assumptions restricted the results veracity.

O controle em cascata e a estrutura variável de um servoposicionador pneumático

Este trabalho aborda o desenvolvimento de um algoritmo de controle para servoposicionadores pneumáticos. Esses dispositivos são limpos, baratos e apresentam boa relação entre seu peso e a potência que são capazes de fornecer, o que os torna vantajosos para muitas aplicações. Seu emprego em tarefas de precisão é comprometido, no entanto, pelo seu comportamento fortemente não-linear. Visando compreender os fenômenos envolvidos, e realizar testes dos controladores propostos através de simulações, é realizado um estudo da modelagem matemática desses sistemas. Buscando situar este trabalho no campo de pesquisa proposto, é apresentada uma introdução aos critérios de estabilidade utilizados no âmbito dos sistemas não-lineares, com atenção especial ao Teorema da Estabilidade Assintótica de Lyapunov. Também são discutidas as técnicas de controle não-linear utilizadas neste trabalho. O controlador não-linear proposto é sintetizado com base na estratégia de controle em cascata. Essa técnica consiste na interpretação do servoposicionador como dois subsistemas interconectados: um subsistema mecânico e outro pneumático. O modelo do subsistema mecânico é utilizado para determinar o valor de pressão necessário para que o sistema siga a trajetória desejada. Com essa informação, é calculada a entrada de controle adequada para o subsistema pneumático, de forma que esta última forneça a pressão desejada ao subsistema mecânico. A fim de assegurar robustez ao sistema controlado frente à presença de incertezas paramétricas e de forças externas e/ou de atrito, utiliza-se uma técnica de controle a estrutura variável no subsistema pneumático. A lei originalmente proposta para o subsistema pneumático é, então, modificada, com os objetivos de eliminar a necessidade de monitorar o sinal de aceleração do sistema e de reduzir o grau de solicitação dos componentes eletromecânicos do servoposicionador. As propriedades de estabilidade e robustez do sistema em malha fechada são provadas analiticamente para cada uma das duas leis de controle propostas. As demonstrações são obtidas por meio da teoria de estabilidade de Lyapunov. Essas propriedades são corroboradas por meio de simulação do sistema controlado, com e sem a presença dos efeitos não-lineares do atrito e das incertezas paramétricas. Além de ratificar as características analiticamente previstas para o servoposicionador em malha fechada, os resultados das simulações também são utilizados para comparar os méritos das diferentes leis de controle propostas para o seguimento no subsistema pneumático.

A verdade da terra : crítica da reforma agrária distributivista

Analisa criticamente o Plano Nacional de Reforma Agrária da Nova República. Mostra que as estatísticas do Cadastro de Imóveis Rurais do INCRA não espelham a realidade da agricultura brasileira, superestimando a importância dos latifúndios e a ociosidade da terra. Defende que os trabalhadores rurais não têm na propriedade da terra sua reivindicação principal. Questiona o paradigma agrarista baseado na ideologia anti-latifundiária e defende uma política de desenvolvimento rural como alternativa à reforma agrária distributivista. visto as recentes transformações da agricultura e a formação do complexo agroindustrial

Revestimentos a base de Ta/Al2O3 produzidos por aspersão térmica sobre substrato metálico

Metal substrates were coated by thermal spraying plasma torch, they were positioned at a distance of 4 and 5 cm from the nozzle exit of the plasma jet. The starting materials were used for deposition of tantalum oxide powder and aluminium. These two materials were mixed and ground into high-energy mill, then immersed in the torch for the production of alumina coating infused with particles of tantalum with nano and micrometric size. The spraying equipment used is a plasma torch arc not transferred, which operating in the range of 250 A and 80 V, was able to produce enough heat to ignite aluminothermic between Ta2O5 and aluminum. Upon reaching the plasma jet, the mixing powders react with the heat of the blaze, which provides sufficient energy for melting aluminum particles. This energy is transferred through mechanisms of self-propagating to the oxide, beginning a reduction reaction, which then hits on the surface of the substrate and forms a coating on which a composite is formed by a junction metal - ceramic (Ta +Al2O3). The phases and quantification of each were obtained respectively by X-ray diffraction and the Rietveld method. Morphology by scanning electron microscopy and chemical analysis by energy dispersive spectroscopy EDS. It was also performed measurements of the substrate roughness, Vickers microhardness measurements in sprays and determination of the electron temperature of the plasma jet by optical emission spectroscopy EEO. The results confirmed the expectation generated around the end product of spraying the mixture Ta2O5 + Al, both in the formation of nano-sized particles and in their final form. The electron excitation temperature was consistent with the purpose of work, in addition, the thermodynamic temperature was efficient for the reduction process of Ta2O5. The electron excitation temperature showed values of 3000, 4500 and 8000 K for flows10, 20 and 30 l / min respectively, these values were taken at the nozzle exit of the plasma jet. The thermodynamic temperature around 1200 ° C, was effective in the reduction process of Ta2O5

Genetic and environmental factors affecting ultrasound measures of longissimus muscle area and backfat thickness in Nelore cattle

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Chicken skeletal muscle-associated macroarray for gene discovery

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Acerola: importance, culture conditions, production and biochemical aspects

Origin and importance. Acerola, or Malpighia emarginata D. C., is native to the Caribbean islands, Central America and the Amazonian region. More recently, it has been introduced in subtropical areas (Asia, India and South America). The vitamin C produced by acerola is better absorbed by the human organism than synthetic ascorbic acid. Exportation of acerola crops is a potential alternative source of income in agricultural businesses. In Brazil, the commercial farming of acerola is quite recent. Climatic conditions. Acerola is a rustic plant. It can resist temperatures close to 0 degrees C, but it is well adapted to temperatures around 26 degrees C with rainfall between (1200 and 1600) mm per year. Fruit characteristics. Acerola fruit is drupaceous, whose form can vary from round to conic. When ripe, it can be red, purple or yellow. The fruit weight varies between (3 and 16) g. Maturation. Acerola fruit presents fast metabolic activity and its maturation occurs rapidly. When commercialised in ambient conditions, it requires fast transportation or the use of refrigerated containers to retard its respiration and metabolism partially. Production and productivity. Flowering and fruiting are typically in cycles associated with rain. Usually, they take place in 25-day cycles, up to 8 times per year. The plant can be propagated by cuttings, grafting or seedlings. Harvest. Fruits produced for markets needs to be harvested at its optimal maturation stage. For distant markets, they need to be packed in boxes and piled up in low layers; transportation should be done in refrigerated trucks in relatively high humid conditions. Biochemical constituents. Acerola is the most important natural source of vitamin C [(1000 to 4500) mg.100(-1) g of pulp], but it is also rich in pectin and pectolytic enzymes, carotenoids, plant fibre, vitamin B, thiamin, riboflavin, niacin, proteins and mineral salts. It has also shown active anti-fungal properties. Products and market. Acerola is used in the production of juice, soft drinks, gums and liqueurs. The USA and Europe are great potential markets. In Europe, acerola extracts are used to enrich pear or apple juices. In the USA, they are used in the pharmaceutical industry. Conclusions. The demand for acerola has increased significantly in recent years because of the relevance of vitamin C in human health, coupled with the use of ascorbic acid as an antioxidant in food and feed. Acerola fruit contains other significant components, which are likely to lead to a further increase in its production and trade all over the world.

ANTAGONISM OF THE MYOTOXIC EFFECTS OF BOTHROPS-JARARACUSSU VENOM AND BOTHROPSTOXIN BY POLYANIONS

The effects of heparin and other polyanions on the myotoxicity of Bothrops jararacussu venom and purified bothropstoxin (BthTX) were investigated. The release rate of creatine kinase (CK) from isolated extensor digitorum longus muscle and the plasma CK activity of mice were used to quantify the results. The myotoxic effects of B. jararacussu venom or BthTX were inhibited by preincubation of these agents with one of the following: a heterogeneous heparin preparation (designated 'heparin'), low mol. wt heparin (H-4500) or dextran sulfates (DS-8000 and DS-500,000). Non-sulfated dextran (D-40,000) and two chondroitin sulfates were ineffective. The antimyotoxic effects of the polyanions are ascribed to their forming inactive acid-base complexes with the basic myotoxins of Bothrops venoms. Gel-filtration experiments in Sephadex provided direct evidence for complex formation between heparin and BthTX. Intravenous (i.v.) administration of H-4500 or DS-8000 opposed the increase in plasma CK activity induced by a subsequent i.m. injection of venom or BthTX. In contrast, pretreatment with i.v. heparin or DS-500,000 enhanced the venom-induced increase in plasma CK activity. This effect was not observed (1) when the animals were treated with a polyvalent antivenom, which inhibits the coagulation and local stasis induced by Bothrops venoms, and (2) when BthTX, which has no thrombotic or hemorrhagic properties, was the myotoxic agent. The potentiation of the venom-induced increase in plasma CK activity by heparin and DS-500,000 is ascribed to improved washout of the CK released from damaged fibers, because of the anticoagulant properties of the drugs.

Blue cooperative luminescence properties in Yb3+ doped GeO2-PbO-Bi2O3 vitreous system for the production of thin films

Germanate glasses are of interest for optoelectronic applications because they combine high mechanical strength, high chemical durability and temperature stability with a large transmission window (400 to 4500 nm) and high refractive index (2.0). GeO2-PbO-Bi2O3 glasses doped with Y-b(3+) were fabricated by melting powders in a crucible and then pouring them in a brass mold. Energy Dispersive Spectroscopy showed that the glass composition has a high spatial uniformity and that the Yb concentration in the solid sample is proportional to the Yb concentration in the melt, what was confirmed by absorption measurements. Intense blue emission at 507 nm was observed, corresponding to half of the wavelength of the near infrared region (NIR) emission; besides, a decay lifetime of 0.25 ms was measured and this corresponds to half of the decay lifetime in the infrared region; these are very strong indications of the presence of blue cooperative luminescence. Larger targets have been produced to be sputtered, resulting in thin films for three dimensional (3D) display and waveguide applications. (c) 2006 Elsevier B.V. All rights reserved.

Treatment of 1,10-phenanthroline laboratory wastewater using the solar photo-Fenton process

The red Fe2+-phenanthroline complex is the basis of a classical spectrophotometric method for determination of iron. Due to the toxicity of this complexing agent, direct disposal of the wastewaters generated in analytical laboratories is not environmentally safe. This work evaluates the use of the solar photo-Fenton process for the treatment of laboratory wastewaters containing phenanthroline. Firstly, the degradation of phenanthroline in water was evaluated at two concentration levels (0.1 and 0.01%, w/v) and the efficiencies of degradation using ferrioxalate (FeOx) and ferric nitrate were compared. The 0.01% w/v solution presented much higher mineralization, achieving 82% after 30 min of solar irradiation with both iron sources. The solar photo-Fenton treatment of laboratory wastewater containing, in addition to phenanthroline, other organic compounds such as herbicides and 4-chlorophenol, equivalent to 4500 mg L-1 total organic carbon (TOC) resulted in total degradation of phenanthroline and 25% TOC removal after 150 min, in the presence of either FeOx or ferric nitrate. A ratio of 1: 10 dilution of the residue increased mineralization in the presence of ferrioxalate, achieving 38% TOC removal after 120 min, while use of ferric nitrate resulted in only 6% mineralization over the same period. (c) 2007 Elsevier B.V. All rights reserved.

Rho-omega mixing and neutron-proton self-energies in the Walecka model

We use the Walecka model to investigate the influence of the charge symmetry breaking ρ0-ω mixing interaction on the neutron-proton self-energy difference in nuclear matter. Using 2mρ〈ρ0|H|ω〉 = -4500 MeV2, and employing the Dirac-Hartree-Fock approximation, we find that the neutron-proton self-energy difference is a decreasing function of the nuclear matter density, and that it has a value of the order of 700 keV at the normal density. The results indicate that the Nolen-Schiffer anomaly might be explained by means of relativistic nuclear models in a similar way as it is explained by means of non-relativistic models.