997 resultados para 375
Resumo:
A basic tenet of ecological economics is that economic growth and development are ultimately constrained by environmental carrying capacities. It is from this basis that notions of a sustainable economy and of sustainable economic development emerge to undergird the “standard model” of ecological economics. However, the belief in “hard” environmental constraints may be obscuring the important role of the entrepreneur in the co-evolution of economic and environmental relations, and hence limiting or distorting the analytic focus of ecological economics and the range of policy options that are considered for sustainable economic development. This paper outlines a co-evolutionary model of the dynamics of economic and ecological systems as connected by entrepreneurial behaviour. We then discuss some of the key analytic and policy implications.
Resumo:
Welcome to the first of what will be a regular review essay on films about journalism, covering recent releases as well as looking back at established classics and under-rated obscurities. And there is plenty to write about. Since 2008, and the end of the research period which informed my 2010 book on Journalists in Film there has been a steady stream of films in which a journalist is a primary character, and in which the nature and functioning of journalism is a theme. Morning Glory (Roger Michell, 2010), the story of a ‘serious’ news man (Harrison Ford) having to adapt to the infotainment environment of breakfast news, came out early in 2011 in the United Kingdom. The well-received UK indie Monsters (Gareth Edwards, 2010), a sci-fi with a journalist at its heart, was released in 2010. In The Soloist (Joe Wright, 2009) Robert Downey Jr played a feature journalist who befriends a mentally ill street musician and seeks to rescue him through his writing. Stieg Larsson’s Millennium trilogy has produced three Swedish films, all of them focused on the campaigning journalist Mikael Blomkvist. The first of these is being remade by Hollywood as of this writing.
Resumo:
Raman microprobe spectra of the clay mineral Wyoming SWy-2-sodium montmorillonite intercalated with the surfactants, methyltrioctadecylammonium bromide (TOMA) dimethyldiotadecylammonium bromide (DODMA) and octadecyl-trimethylammonium bromide (ODTMA), have been measured in the CH2 stretching region at external pressures up to ~40 kbar with the aid of a diamond-anvil cell. In the case of the intercalated clays containing TOMA and DODMA, the Raman data afford evidence for gauche to trans conformational changes in the orientation of the CH2 chains in the surfactants with increasing pressure. These conformational changes are reversed completely upon the release of pressure.
Resumo:
Objective: To examine whether health professionals who commonly deal with mental disorder are able to identify co occurring alcohol misuse in young people presenting with depression. Method: Between September 2006 and January 2007, a survey examining beliefs regarding appropriate interventions for mental disorder in youth was sent to 1710 psychiatrists, 2000 general practitioners (GPs), 1628 mental health nurses, and 2000 psychologists in Australia. Participants within each professional group were randomly given one of four vignettes describing a young person with a DSM-IV mental disorder. Herein is reported data from the depression and depression with alcohol misuse vignettes. Results: A total of 305 psychiatrists, 258 GPs, 292 mental health nurses and 375 psychologists completed one of the depression vignettes. A diagnosis of mood disorder was identified by at least 83.8% of professionals, with no significant differences noted between professional groups. Rates of reported co-occurring substance use disorders were substantially lower, particularly among older professionals and psychologists. Conclusions: GPs, psychologists and mental health professionals do not readily identify co-occurring alcohol misuse in young people with depression. Given the substantially negative impact of co-occurring disorders, it is imperative that health-care professionals are appropriately trained to detect such disorders promptly, to ensure young people have access to effective, early intervention.
Resumo:
Data preprocessing is widely recognized as an important stage in anomaly detection. This paper reviews the data preprocessing techniques used by anomaly-based network intrusion detection systems (NIDS), concentrating on which aspects of the network traffic are analyzed, and what feature construction and selection methods have been used. Motivation for the paper comes from the large impact data preprocessing has on the accuracy and capability of anomaly-based NIDS. The review finds that many NIDS limit their view of network traffic to the TCP/IP packet headers. Time-based statistics can be derived from these headers to detect network scans, network worm behavior, and denial of service attacks. A number of other NIDS perform deeper inspection of request packets to detect attacks against network services and network applications. More recent approaches analyze full service responses to detect attacks targeting clients. The review covers a wide range of NIDS, highlighting which classes of attack are detectable by each of these approaches. Data preprocessing is found to predominantly rely on expert domain knowledge for identifying the most relevant parts of network traffic and for constructing the initial candidate set of traffic features. On the other hand, automated methods have been widely used for feature extraction to reduce data dimensionality, and feature selection to find the most relevant subset of features from this candidate set. The review shows a trend toward deeper packet inspection to construct more relevant features through targeted content parsing. These context sensitive features are required to detect current attacks.
Resumo:
Postoperative fever in arthroplasty patients is common. The value of diagnostic workup of fever in this instance is of questionable utility. Studies have shown that blood cultures in this scenario add little to clinical management, but sample sizes have been small and the use of blood cultures in this setting continues. This study aimed to examine the value of blood cultures in the assessment of postoperative fever in a large arthroplasty population. The medical records of 101 patients who had 141 blood culture sets taken during a 2-year period were retrospectively analyzed. Of the 141 blood culture sets, only 2 returned positive results. These were both thought to be as a result of skin contamination at the time of venipuncture. No infectious sequelae occurred in either patient. We conclude that blood cultures have no role to play in the assessment of the febrile, otherwise asymptomatic arthroplasty patient in the early postoperative period.
Resumo:
The present study investigated whether, like fear conditioned to pictures of snakes and spiders, fear conditioned to angry faces resists extinction even after verbal instruction and removal of the shock electrode. Participants were trained in a differential Pavlovian fear conditioning procedure with angry face or happy face conditional stimuli (CSs). Prior to extinction, half the participants in each group were informed that no more unconditional stimuli would be presented and the shock electrode was removed. In the absence of this manipulation, participants showed resistance to extinction after training with angry face CSs, but not after training with happy face CSs. Instructed extinction and electrode removal abolished fear conditioning regardless of the emotion expressed by the CS faces. This finding suggests that fear conditioned to angry faces, like fear conditioned to racial out-group faces, is more malleable than fear conditioned to snakes and spiders.
Resumo:
Recently an innovative composite panel system was developed, where a thin insulation layer was used externally between two plasterboards to improve the fire performance of light gauge cold-formed steel frame walls. In this research, finite-element thermal models of both the traditional light gauge cold-formed steel frame wall panels with cavity insulation and the new light gauge cold-formed steel frame composite wall panels were developed to simulate their thermal behaviour under standard and realistic fire conditions. Suitable apparent thermal properties of gypsum plasterboard, insulation materials and steel were proposed and used. The developed models were then validated by comparing their results with available fire test results. This article presents the details of the developed finite-element models of small-scale non-load-bearing light gauge cold-formed steel frame wall panels and the results of the thermal analysis. It has been shown that accurate finite-element models can be used to simulate the thermal behaviour of small-scale light gauge cold-formed steel frame walls with varying configurations of insulations and plasterboards. The numerical results show that the use of cavity insulation was detrimental to the fire rating of light gauge cold-formed steel frame walls, while the use of external insulation offered superior thermal protection to them. The effects of real fire conditions are also presented.
Resumo:
Filtration membrane technology has already been employed to remove various organic effluents produced from the textile, paper, plastic, leather, food and mineral processing industries. To improve membrane efficiency and alleviate membrane fouling, an integrated approach is adopted that combines membrane filtration and photocatalysis technology. In this study, alumina nanofiber (AF) membranes with pore size of about 10 nm (determined by the liquid-liquid displacement method) have been synthesized through an in situ hydrothermal reaction, which permitted a large flux and achieved high selectivity. Silver nanoparticles (Ag NPs) are subsequently doped on the nanofibers of the membranes. Silver nanoparticles can strongly absorb visible light due to the surface plasmon resonance (SPR) effect, and thus induce photocatalytic degradation of organic dyes, including anionic, cationic and neutral dyes, under visible light irradiation. In this integrated system, the dyes are retained on the membrane surface, their concentration in the vicinity of the Ag NPs are high and thus can be efficiently decomposed. Meanwhile, the usual flux deterioration caused by the accumulation of the filtered dyes in the passage pores can be avoided. For example, when an aqueous solution containing methylene blue is processed using an integrated membrane, a large flux of 200 L m-2 h-1 and a stable permeating selectivity of 85% were achieved. The combined photocatalysis and filtration function leads to superior performance of the integrated membranes, which have a potential to be used for the removal of organic pollutants in drinking water.
Resumo:
The emerging principle of a “responsibility to protect” (R2P) presents a direct challenge to China’s traditional emphasis on the twin principles of non-intervention in the domestic affairs of other states and non-use of military force. This paper considers the evolution of China’s relationship with R2P over the past ten years. In particular, it examines how China engaged with R2P during the recent Libyan crisis, and considers what impact this conflict may have first, on Chinese attitudes to R2P, and second, on the future development and implementation of the doctrine itself. This paper argues that China’s decision to allow the passage of Security Council resolution 1973, authorising force in Libya, was shaped by an unusual set of political and factual circumstances, and should not be viewed as evidence of a dramatic shift in Chinese attitudes towards R2P. More broadly, controversy over the scope of NATO’s military action in Libya has raised questions about R2P’s legitimacy, which have contributed to a lack of timely international action in Syria. In the short term at least, this post-Libya backlash against R2P is likely to constrain the Security Council’s ability to respond decisively to other civilian protection situations.
Resumo:
This study reports on the gas sensing characteristics of Fe-doped (10 at.%) tungsten oxide thin films of various thicknesses (100–500 nm) prepared by electron beam evaporation. The performance of these films in sensing four gases (H2, NH3, NO2 and N2O) in the concentration range 2–10,000 ppm at operating temperatures of 150–280 °C has been investigated. The results are compared with the sensing performance of a pure WO3 film of thickness 300 nm produced by the same method. Doping of the tungsten oxide film with 10 at.% Fe significantly increases the base conductance of the pure film but decreases the gas sensing response. The maximum response measured in this experiment, represented by the relative change in resistance when exposed to a gas, was ΔR/R = 375. This was the response amplitude measured in the presence of 5 ppm NO2 at an operating temperature of 250 °C using a 400 nm thick WO3:Fe film. This value is slightly lower than the corresponding result obtained using the pure WO3 film (ΔR/R = 450). However it was noted that the WO3:Fe sensor is highly selective to NO2, exhibiting a much higher response to NO2 compared to the other gases. The high performance of the sensors to NO2 was attributed to the small grain size and high porosity of the films, which was obtained through e-beam evaporation and post-deposition heat treatment of the films at 300 °C for 1 h in air.