Petrografia, litogeoquímica e datação Ar-Ar dos montes submarinos e dos rochedos de Martim Vaz - Cadeia Vitória-Trindade

Este trabalho de mestrado estudou a ilha de Martin Vaz e cinco montes submarinos da Cadeia Vitória-Trindade Columbia, Dogaressa, Davis, Jaseur e Montague. Martin Vaz é um conjunto de ilhas formado pela ilha principal - Martin Vaz, duas ilhotas íngremes e inacessíveis - a Ilha do Norte e a Ilha do Sul além de vários rochedos menores, como o Rochedo Agulha, espalhados a 48 km a leste de Trindade, perfazendo uma área total de 0,3 km. Martin Vaz, assim como os montes submarinos, pertencem a chamada Cadeia Vitória-Trindade, estão inseridos em um contexto tectônico regional cujo trend W-E sugere representar o track da pluma mantélica de Trindade quando da passagem da Placa Sul Americana sobre ela desde o Terciário (CROUGH et al., 1980; OCONNOR & DUNCAN, 1990, GIBSON et at., 1997). A petrografia das amostras de Martin Vaz indica haver basanitos parcialmente alteradas, melanocráticas, textura afanítica, porosas, apresentando vesículas em torno de 1,0-5,0 milímetros. Apresenta fenocristais de piroxênio além de alguns fenocristais de olivina verde-oliva translúcido variando de 1,0-3,0 milímetros. A ilha principal apresenta também diques e necks fonolíticos apresentando matriz microlítica alterada, orientada, de cor verde apresentando minerais ripiformes de cor branca (feldspato alcalino) e outros de cor violácea (titanoaugita) além de pequenos opacos. Pequenos fenocristais de aegerina-augita fortemente pleocroica, alguns apresentando geminação simples, por vezes zonado, apresenta extinção variando de c ∧ α ou X = 23 a 33 (medida de 10 grãos). Biotita laranja amarronzada com textura poiquilítica (1,0 mm), minúsculos cristais euédricos de titanita (raros), além de cristais pseudohexagonais isotrópicos alterados de analcita e carbonatos. As amostras utilizadas neste trabalho de mestrado possuem valor mínimo de 33.91 % SiO2 (TRIM-01D) e máximo de 52,2 (MVA-01) variando de ultrabásicas a básicas. Através da análise dos óxidos SiO2 e MgO é possível distinguir dois grupos de rochas para Martin Vaz: um ultramáfico magnesiano (<42% SiO2 e >7% MgO) e um básico (>45% SiO2) e, para os montes submarinos, dois grupos: um ultramáfico magnesiano (>9% MgO <42% SiO2) e um básico (>45% SiO2 e com valores de MgO em torno de 4%). As análises de Ar-Ar para as quatro amostras de Martin Vaz apresentam idades para o derrame de basanito variando de 320366 Ka (MVA-10) à 623127 Ka (MVA-04). A única amostra datada representando do dique de fonólito é a MVA-05B e obteve idade de 64984 Ka, indicando ser contemporânea ao derrame basanítico.

Investigating carbon materials for use as the electron emission source in a parallel electron-beam lithography system

A microelectronic parallel electron-beam lithography system using an array of field emitting microguns is currently being developed. This paper investigates the suitability of various carbon based materials for the electron source in this device, namely tetrahedrally bonded amorphous carbon (ta-C), nanoclustered carbon and carbon nanotubes. Ta-C was most easily integrated into a gated field emitter structure and various methods, such as plasma and heavy ion irradiation, were used to induce emission sites in the ta-C. However, the creation of such emission sites at desired locations appeared to be difficult/random in nature and thus the material was unsuitable for this application. In contrast, nanoclustered carbon material readily field emits with a high site density but the by-products from the deposition process create integration issues when using the material in a microelectronic gated structure. Carbon nanotubes are currently the most promising candidate for use as the emission source. We have developed a high yield and clean (amorphous carbon by-product free) PECVD process to deposit single free standing nanotubes at desired locations with exceptional uniformity in terms of nanotube height and diameter. Field emission from an array of nanotubes was also obtained. © 2001 Elsevier Science B.V.

Demonstration of 2.488Gb/s simultaneous all-optical wavelength conversion and tone reading/replacing in an integrated-SOA/DFB laser

A technique is demonstrated that allows for the wavelength conversion of data with both simultaneous monitoring and replacing of a wavelength identifying pilot tone. The technique should be upgradable to data rates of 10Gb/s and higher.

Studies on fecundity of Puntius sarana (Ham.) in relation to total length, total weight and ovary weight

A total of 43 mature female of Puntius sarana (Ham.) ranging from 204 mm to 320 mm in length and 102 to 482 g in weight were used for present studies. The relationship between fecundity with respect to total length (TL), total weight (TW) and ovary weight (OW) was found to be linear. The coefficient of co-relation 'r' of the above relationships was found to be 0.5947, 0.5761 and 0.9837 respectively. All these values are highly significant (P=0.01) indicating a close relationship between these parameters. However, as indicated by value of 'r' (0.9837), the fecundity is more closely related to ovary weight and hence the ovary weight may be a better index of fecundity than the total length or weight.

Thickness control of Molecular Beam Epitaxy grown layers at the 0.01-0.1 monolayer level

Electron tunnelling through semiconductor tunnel barriers is exponentially sensitive to the thickness of the barrier layer, and in the most common system, the AlAs tunnel barrier in GaAs, a one monolayer variation in thickness results in a 300% variation in the tunnelling current for a fixed bias voltage. We use this degree of sensitivity to demonstrate that the level of control at 0.06 monolayer can be achieved in the growth by molecular beam epitaxy, and the geometrical variation of layer thickness across a wafer at the 0.01 monolayer level can be detected.

Investigations of current limiting properties of the MgB2 wires subjected to pulse overcurrents in the benchtop tester

A laboratory scale desktop test system including a cryogenic system, an AC pulse generation system and a real time data acquisition program in LabView/DAQmx, has been developed to evaluate the quench properties of MgB 2 wires as an element in a superconducting fault current limiter under pulse overcurrents at 25K in self-field conditions. The MgB2 samples started from a superconducting state and demonstrated good current limiting properties characterized by a fast transition to the normal state during the first half of the cycle and a continuously limiting effect in the subsequent cycles without burnouts. The experimental and numerical simulation results on the quench behaviour indicate the feasibility of using MgB 2 for future superconducting fault current limiter (SFCL) applications. © IOP Publishing Ltd.

固定化假单胞菌CTP-01细胞分解对硫磷的研究

用明胶-戊二醛(GGA)和聚丙烯酰胺(PAA)包埋的固定化Pseudomonas sp.CTP-01细胞具有降解对硫磷的特性。GGA固定化细胞水解对硫磷的活力比PAA固定化细胞高5.8倍。当保存在4℃时GGA和PAA固定化细胞分别可以保持活力31.3和70%。GGA和PAA包埋的细胞最适反应温度分别为50℃到70℃和60℃到70℃,然而整细胞在温度超过65℃时活力很快下降。GGA和PAA两种固定化细胞最适pH为8.0,当pH低于7.0时活力开始下降,pH4吋则完全失活。

有机磷农药在水生态系中生物净化机理研究---- ----4. Pseudomonas sp. CTP-01 的对硫磷水解酶诱导合成性质

Pseudomonas sp.CTP-01的对硫磷水解酶具有底物诱导合成性质。停滞生长期的细胞接触底物半小时即产生相应酶的合成,而指数生长期的细胞接触底物48小时后才发生酶的合成。甲基对硫磷及对硝基酚也具有诱导作用,可见合成对硫磷水解酶的诱导特异基团可能与对硝基酚及其苯环上的取代基有密切关系。

Durability performance of self-compacting concrete

Although self compacting concrete (SCC) is currently used in many countries, there is a fundamental lack of the intrinsic durability of the material itself. This article presents the outcomes from a research program on principal indicators that define the durability of SCC (sorptivity, porosity and chloride ion permeability) and compares these indicators with the corresponding parameters of conventional concrete. The results show, for the first time, that there is a correlation between the various durability indicators for the specific filler additives used in the mix designs incorporated in this paper. Such a correlation may be used to assess the durability of SCC without the need to rely on time consuming artificial weathering experimental procedures. © 2012 Elsevier Ltd. All rights reserved.

Collapse of a composite beam made from ultra high molecular-weight polyethylene fibres

Hot-pressed laminates with a [0/90]48 lay-up, consisting of 83% by volume of ultra high molecular-weight polyethylene (UHMWPE) fibres, and 17% by volume of polyurethane (PU) matrix, were cut into cantilever beams and subjected to transverse end-loading. The collapse mechanisms were observed both visually and by X-ray scans. Short beams deform elastically and collapse plastically in longitudinal shear, with a shear strength comparable to that observed in double notch, interlaminar shear tests. In contrast, long cantilever beams deform in bending and collapse via a plastic hinge at the built-in end of the beam. The plastic hinge is formed by two wedge-shaped microbuckle zones that grow in size and in intensity with increasing hinge rotation. This new mode of microbuckling under macroscopic bending involves both elastic bending and shearing of the plies, and plastic shear of the interface between each ply. The double-wedge pattern contrasts with the more usual parallel-sided plastic microbuckle that occurs in uniaxial compression. Finite element simulations and analytical models give additional insight into the dominant material and geometric parameters that dictate the collapse response of the UHMWPE composite beam in bending. Detailed comparisons between the observed and predicted collapse responses are used in order to construct a constitutive model for laminated UHMWPE composites. © 2013 Elsevier Ltd.

A high temperature and low power SOI CMOS MEMS based thermal conductivity gas sensor

The design, 3D FEM modelling and measurement results of a novel high temperature, low power SOI CMOS MEMS thermal conductivity gas sensor are presented here. The sensor consists of a circular membrane with an embedded tungsten micro-heater. The high sensing capability is based on the temperature sensitivity of the resistive heating element. The sensor was fabricated at a commercial foundry using a 1 μm process and measures only 1×1 mm 2. The circular membrane has a 600 μm diameter while the heating element has a 320 μm diameter. Measurement results show that for a constant power consumption of 75 mW the heater temperature was 562.4°C in air, 565.9°C in N2, 592.5°C for 1 % H2 in Ar and 599.5°C in Ar. © 2013 IEEE.

Superradiant emission from a tapered quantum-dot semiconductor diode emitter

Superradiant emission pulses from a quantum-dot tapered device are generated on demand at repetition rates of up to 5 MHz. The pulses have durations as short as 320 fs at a wavelength of 1270 nm. © 2010 Optical Society of America.