Wind turbine indirect ice detection and operational analysis

Wind energy is one of the most promising and fast growing sector of energy production. Wind is ecologically friendly and relatively cheap energy resource available for development in practically all corners of the world (where only the wind blows). Today wind power gained broad development in the Scandinavian countries. Three important challenges concerning sustainable development, i.e. energy security, climate change and energy access make a compelling case for large-scale utilization of wind energy. In Finland, according to the climate and energy strategy, accepted in 2008, the total consumption of electricity generated by means of wind farms by 2020, should reach 6 - 7% of total consumption in the country [1]. The main challenges associated with wind energy production are harsh operational conditions that often accompany the turbine operation in the climatic conditions of the north and poor accessibility for maintenance and service. One of the major problems that require a solution is the icing of turbine structures. Icing reduces the performance of wind turbines, which in the conditions of a long cold period, can significantly affect the reliability of power supply. In order to predict and control power performance, the process of ice accretion has to be carefully tracked. There are two ways to detect icing – directly or indirectly. The first way applies to the special ice detection instruments. The second one is using indirect characteristics of turbine performance. One of such indirect methods for ice detection and power loss estimation has been proposed and used in this paper. The results were compared to the results directly gained from the ice sensors. The data used was measured in Muukko wind farm, southeast Finland during a project 'Wind power in cold climate and complex terrain'. The project was carried out in 9/2013 - 8/2015 with the partners Lappeenranta university of technology, Alstom renovables España S.L., TuuliMuukko, and TuuliSaimaa.

Identifying wind power ramp causes from multivariate datasets: a methodological proposal and its application to reanalysis data.

Forecasting abrupt variations in wind power generation (the so-called ramps) helps achieve large scale wind power integration. One of the main issues to be confronted when addressing wind power ramp forecasting is the way in which relevant information is identified from large datasets to optimally feed forecasting models. To this end, an innovative methodology oriented to systematically relate multivariate datasets to ramp events is presented. The methodology comprises two stages: the identification of relevant features in the data and the assessment of the dependence between these features and ramp occurrence. As a test case, the proposed methodology was employed to explore the relationships between atmospheric dynamics at the global/synoptic scales and ramp events experienced in two wind farms located in Spain. The achieved results suggested different connection degrees between these atmospheric scales and ramp occurrence. For one of the wind farms, it was found that ramp events could be partly explained from regional circulations and zonal pressure gradients. To perform a comprehensive analysis of ramp underlying causes, the proposed methodology could be applied to datasets related to other stages of the wind-topower conversion chain.

A brief review on offshore wind turbine fault detection and recent development in condition monitoring based maintenance system

Offshore wind turbine requires more systematized operation and maintenance strategies to ensure systems are harmless, profitable and cost-effective. Condition monitoring and fault diagnostic systems ominously plays an important role in offshore wind turbine in order to cut down maintenance and operational costs. Condition monitoring techniques which describing complex faults and failure mode types and their generated traceable signs to provide cost-effective condition monitoring and predictive maintenance and their diagnostic schemes. Continuously monitor the condition of critical parts are the most efficient way to improve reliability of wind turbine. Implementation of Condition Based Maintenance (CBM) strategy provides right time maintenance decisions and Predictive Health Monitoring (PHM) data to overcome breakdown and machine downtime. Fault detection and CBM implementation is challenging for off shore wind farm due to the complexity of remote sensing, components health and predictive assessment, data collection, data analysis, data handling, state recognition, and advisory decision. The rapid expansion of wind farms, advanced technological development and harsh installation sites needs a successful CM approach. This paper aims to review brief status of recent development of CM techniques and focusing with major faults takes place in gear box and bearing, rotor and blade, pitch, yaw and tower system and generator and control system.

Prediction interval estimation for wind farm power generation forecasts using support vector machines

Accurate forecasting of wind power generation is quite an important as well as challenging task for the system operators and market participants due to its high uncertainty. It is essential to quantify uncertainties associated with wind power generation forecasts for their efficient application in optimal management of wind farms and integration into power systems. Prediction intervals (PIs) are well known statistical tools which are used to quantify the uncertainty related to forecasts by estimating the ranges of the future target variables. This paper investigates the application of a novel support vector machine based methodology to directly estimate the lower and upper bounds of the PIs without expensive computational burden and inaccurate assumptions about the distribution of the data. The efficiency of the method for uncertainty quantification is examined using monthly data from a wind farm in Australia. PIs for short term application are generated with a confidence level of 90%. Experimental results confirm the ability of the method in constructing reliable PIs without resorting to complex computational methods.

Mitigation of harmonics of DFIGs in DC-Microgrids

During the last few years, there has been an increased attention paid on the developments of DC microgrids (DCMGs) and their applications. For economical and more flexible wind power generation, doubly fed induction generator (DFIG) is regarded as a most commonly used generator in wind farms. This paper presents a configuration and operation method for a DCMG connected with DFIGs, in which the controller of the DFIG is designed for maximum power point tracking (MPPT). The generation of harmonics and their effects on the generator in this configuration are analyzed and a harmonic compensation method is proposed. Furthermore, the simulation results are presented to show that the DFIG can be operated effectively in DCMGs and harmonic currents can be reduced.

Nutzungskonflikte zwischen Windparks und Fischerei in der Nordsee – was die marine Raumordnung noch nicht berücksichtigt

The current approval procedure for wind farm proposals in the German EEZ only considers site specific conflict analysis between the wind farm and fisheries. Due to the relatively small spatial coverage of single sites potential opportunity losses to the fisheries are always considered as low or negligible. Cumulative effects on fisheries that will occur once all proposed wind farms are in place are not yet considered adequately. However, those cumulative effects will be quite substantial because, in particular, opportunities to catch such valuable species as flatfish will be considerably reduced.

The co-location of offshore windfarms and decapod fisheries in the UK: Constraints and opportunities

The offshore wind sector in the UK is expanding rapidly and is set to occupy significant areas of the coastal zone, making it necessary to explore the potential for co-location with other economic activities. The presence of turbine foundations introduces hard substrates into areas previously dominated by soft sediments, implying that artificial reef effects may occur, with potential benefits for fisheries. This review focuses on the possibilities for locating fisheries for two commercially important decapods, the brown crab Cancer pagurus and the European lobster Homarus gammarus, within offshore wind farms. Existing understanding of habitat use by C pagurus and H. gammarus suggests that turbine foundations have the potential to act as artificial reefs, although the responses of these species to noise and electromagnetic fields are poorly understood. Offshore wind farm monitoring programmes provide very limited information, but do suggest that adult C pagurus associate with turbine foundations, which may also serve as nursery areas. There was insufficient deployment and monitoring of rock armouring to draw conclusions about the association of H. gammarus with offshore wind farm foundations. The limited information currently available demonstrates the need for further research into the ecological and socioeconomic issues surrounding fishery co-location potential.

The co-location of offshore windfarms and decapod fisheries in the UK: Constraints and opportunities

The offshore wind sector in the UK is expanding rapidly and is set to occupy significant areas of the coastal zone, making it necessary to explore the potential for co-location with other economic activities. The presence of turbine foundations introduces hard substrates into areas previously dominated by soft sediments, implying that artificial reef effects may occur, with potential benefits for fisheries. This review focuses on the possibilities for locating fisheries for two commercially important decapods, the brown crab Cancer pagurus and the European lobster Homarus gammarus, within offshore wind farms. Existing understanding of habitat use by C pagurus and H. gammarus suggests that turbine foundations have the potential to act as artificial reefs, although the responses of these species to noise and electromagnetic fields are poorly understood. Offshore wind farm monitoring programmes provide very limited information, but do suggest that adult C pagurus associate with turbine foundations, which may also serve as nursery areas. There was insufficient deployment and monitoring of rock armouring to draw conclusions about the association of H. gammarus with offshore wind farm foundations. The limited information currently available demonstrates the need for further research into the ecological and socioeconomic issues surrounding fishery co-location potential.

Valuing conservation benefits of an offshore marine protected area

Increasing anthropogenic pressure in the offshore marine environment highlights the need for improved management and conservation of offshore ecosystems. This study scrutinises the applicability of a discrete choice experiment to value the expected benefits arising from the conservation of an offshore sandbank in UK waters. The valuation scenario refers to the UK part of the Dogger Bank, in the southern North Sea, and is based on real-world management options for fisheries, wind farms and marine protection currently under discussion for the site. It is assessed to what extent the general public perceive and value conservation benefits arising from an offshore marine protected area. The survey reveals support for marine conservation measures despite the general public’s limited prior knowledge of current marine planning. Results further show significant values for an increase in species diversity, the protection of certain charismatic species and a restriction in the spread of invasive species across the site. Implications for policy and management with respect to commercial fishing, wind farm construction and nature conservation are discussed.

What are the local impacts of energy systems on marine ecosystem services: a systematic map protocol

Background: Increasing concentrations of atmospheric greenhouse gases (GHG) and its impact on the climate has resulted in many international governments committing to reduce their GHG emissions. The UK, for example, has committed to reducing its carbon emissions by 80% by 2050. Suggested ways of reaching such a target are to increase dependency on offshore wind, offshore gas and nuclear. It is not clear, however, how the construction, operation and decommissioning of these energy systems will impact marine ecosystem services, i.e. the services obtained by people from the natural environment such as food provisioning, climate regulation and cultural inspiration. Research on ecosystem service impacts associated with offshore energy technologies is still in its infancy. The objective of this review is to bolster the evidence base by firstly, recording and describing the impacts of energy technologies at the marine ecosystems and human level in a consistent and transparent way; secondly, to translate these ecosystem and human impacts into ecosystem service impacts by using a framework to ensure consistency and comparability. The output of this process will be an objective synthesis of ecosystem service impacts comprehensive enough to cover different types of energy under the same analysis and to assist in informing how the provision of ecosystem services will change under different energy provisioning scenarios. Methods: Relevant studies will be sourced using publication databases and selected using a set of selection criteria including the identification of: (i) relevant subject populations such as marine and coastal species, marine habitat types and the general public; (ii) relevant exposure types including offshore wind farms, offshore oil and gas platforms and offshore structures connected with nuclear; (iii) relevant outcomes including changes in species structure and diversity; changes in benthic, demersal and pelagic habitats; and changes in cultural services. The impacts will be synthesised and described using a systematic map. To translate these findings into ecosystem service impacts, the Common International Classification of Ecosystem Services (CICES) and Millennium Ecosystem Assessment (MEA) frameworks are used and a detailed description of the steps taken provided to ensure transparency and replicability.

Life Around the Turbines

Life around the Turbines is an outreach project developed by the Marine Biological Association of the UK (MBA) funded by COWRIE (Collaborative Offshore Wind Research into the Environment). The project was designed to promote the need for renewable energy, raise awareness of marine biodiversity and generate discussions about offshore wind farms particularly with school children around Great Britain. The project has run from 2008 – 2014 and has involved workshops with schools all around Great Britain; production of online resources and a series of training events and tools for marine educators. All of the resources and workshops were developed to correlate with the national curricula for England, Scotland and Wales and cover a range of topics including science, citizenship and technology. Combining charismatic marine wildlife with technology and interactive, hands-on workshop activities has proved a successful and popular combination, received well by students and teachers. We present the methods of engagement used and some of the information received through a basic activity evaluation process. We will also share information about how conference participants can obtain and utilise free resources to support their own outreach and teaching at www.mba.ac.uk/education.

Capability Curve Based Enhanced Reactive Power Control Strategy for Stability Enhancement and Network Voltage Management

Reactive power has become a vital resource in modern electricity networks due to increased penetration of distributed generation. This paper examines the extended reactive power capability of DFIGs to improve network stability and capability to manage network voltage profile during transient faults and dynamic operating conditions. A coordinated reactive power controller is designed by considering the reactive power capabilities of the rotor-side converter (RSC) and the grid-side converter (GSC) of the DFIG in order to maximise the reactive power support from DFIGs. The study has illustrated that, a significant reactive power contribution can be obtained from partially loaded DFIG wind farms for stability enhancement by using the proposed capability curve based reactive power controller; hence DFIG wind farms can function as vital dynamic reactive power resources for power utilities without commissioning additional dynamic reactive power devices. Several network adaptive droop control schemes are also proposed for network voltage management and their performance has been investigated during variable wind conditions. Furthermore, the influence of reactive power capability on network adaptive droop control strategies has been investigated and it has also been shown that enhanced reactive power capability of DFIGs can substantially improve the voltage control performance.

Adaptive backstepping droop controller design for multi-terminal high-voltage direct current systems

Wind power is one of the most developed renewable energy resources worldwide. To integrate offshore wind farms to onshore grids, the high-voltage direct current (HVDC) transmission cables interfaced with voltage source converters (VSCs) are considered to be a better solution than conventional approaches. Proper DC voltage indicates successive power transfer. To connect more than one onshore grid, the DC voltage droop control is one of the most popular methods to share the control burden between different terminals. However, the challenges are that small droop gains will cause voltage deviations, while higher droop gain settings will cause large oscillations. This study aims to enhance the performance of the traditional droop controller by considering the DC cable dynamics. Based on the backstepping control concept, DC cables are modelled with a series of capacitors and inductors. The final droop control law is deduced step-by-step from the original remote side. At each step the control error from the previous step is considered. Simulation results show that both the voltage deviations and oscillations can be effectively reduced using the proposed method. Further, power sharing between different terminals can be effectively simplified such that it correlates linearly with the droop gains, thus enabling simple yet accurate system operation and control.

Analysis of Transmission Loss with Droop Control in a Multi-Terminal HVDC System

High Voltage Direct Current (HVDC) electric power transmission is a promising technology for integrating offshore wind farms and interconnecting power grids in different regions. In order to maintain the DC voltage, droop control has been widely used. Transmission line loss constitutes an import part of the total power loss in a multi-terminal HVDC scheme. In this paper, the relation between droop controller design and transmission loss has been investigated. Different MTDC layout configurations are compared to examine the effect of droop controller design on the transmission loss.