An epidemiologic evaluation of a worksite based intervention

The healthcare industry spends billions on worker injury and employee turnover. Hospitals and healthcare settings have one of the highest rates of lost days due to injuries. The occupational hazards for healthcare workers can be classified into biological, chemical, ergonomic, physical, organizational, and psychosocial. Therefore, interventions addressing a range of occupational health risks are needed to prevent injuries and reduce turnover and reduce costs. ^ The Sacred Vocation Program (SVP) seeks to change the content of work, i.e., the meaningfulness of work, to improve work environments. The SVP intervenes at both the individual and organizational level. First the SVP attempts to connect healthcare workers with meaning from their work through a series of 5 self-discovery group sessions. In a sixth session the graduates take an oath recommitting them to do their work as a vocation. Once motivated to connect with meaning in their work, a representative employee group meets in a second set of five meetings. This representative group suggests organizational changes to create a culture that supports employees in their calling. The employees present their plan in the twelfth session to management beginning a new phase in the existing dialogue between employees and management. ^ The SVP was implemented in a large Dallas hospital (almost 1000 licensed beds). The Baylor University Medical Center (BUMC) Pastoral Care department invited front-line caregivers (primarily Patient Care Assistants, PCAs, or Patient Care Technicians, PCTs) to participate in the SVP. Participants completed SVP questionnaires at the beginning and following SVP implementation. Following implementation, employer records were collected on injury, absence and turnover to further evaluate the program's effectiveness on metrics that are meaningful to managers in assessing organizational performance. This provided an opportunity to perform an epidemiological evaluation of the intervention using the two sources of information: employee self-reports and employer administrative data. ^ The ability to evaluate the effectiveness of the SVP on program outcomes could be limited by the strength of the measures used. An ordinal CFA performed on baseline SVP questionnaire measurements examined the construct validity and reliability of the SVP scales. Scales whose item-factor structure was confirmed in ordinal CFA were evaluated for their psychometric properties (i.e., reliability, mean, ceiling and floor effects). CFA supported the construct validity of six of the proposed scales: blocks to spirituality, meaning at work, work satisfaction, affective commitment, collaborative communication, and MHI-5. Five of the six scales confirmed had acceptable measures of reliability (all but MHI-5 had α>0.7). All six scales had a high percentage (>30%) of the scores at the ceiling. These findings supported the use of these items in the evaluation of change although strong ceiling effects may hinder discerning change. ^ Next, the confirmed SVP scales were used to evaluate whether the intervention improved program constructs. To evaluate the SVP a one group pretest-posttest design compared participants’ self-reports before and after the intervention. It was hypothesized that measurements of reduced blocks to spirituality (α = 0.76), meaning at work (α = 0.86), collaborative communication (α = 0.67) and SVP job tasks (α = 0.97) would improve following SVP implementation. The SVP job tasks scale was included even though it was not included in the ordinal CFA analysis due to a limited sample and high inter-item correlation. Changes in scaled measurements were assessed using multilevel linear regression methods. All post-intervention measurements increased (increases <0.28 points) but only reduced blocks to spirituality was statistically significant (0.22 points on a scale from 1 to 7, p < 0.05) after adjustment for covariates. Intensity of the intervention (stratifying on high participation units) strengthened effects; but were not statistically significant. The findings provide preliminary support for the hypothesis that meaning in work can be improved and, importantly, lend greater credence to any observed improvements in the outcomes. (Abstract shortened by UMI.)^

Artisan procedures to generate uniform tilings

This paper try to prove how artisans c ould discover all uniform tilings and very interesting others us ing artisanal combinatorial pro cedures without having to use mathematical procedures out of their reac h. Plane Geometry started up his way through History by means of fundamental drawing tools: ruler and co mpass. Artisans used same tools to carry out their orna mental patterns but at some point they began to work manually using physical representations of fi gures or tiles previously drawing by means of ruler and compass. That is an important step for craftsman because this way provides tools that let him come in the world of symmetry opera tions and empirical knowledge of symmetry groups. Artisans started up to pr oduce little wooden, ceramic or clay tiles and began to experiment with them by means of joining pieces whether edge to edge or vertex to vertex in that way so it can c over the plane without gaps. Economy in making floor or ceramic tiles could be most important reason to develop these procedures. This empiric way to develop tilings led not only to discover all uniform tilings but later discovering of aperiodic tilings.

Artisan procedures to generate uniform tilings

This paper try to prove how artisans c ould discover all uniform tilings and very interesting others us ing artisanal combinatorial pro cedures without having to use mathematical procedures out of their reac h. Plane Geometry started up his way through History by means of fundamental drawing tools: ruler and co mpass. Artisans used same tools to carry out their orna mental patterns but at some point they began to work manually using physical representations of fi gures or tiles previously drawing by means of ruler and compass. That is an important step for craftsman because this way provides tools that let him come in the world of symmetry opera tions and empirical knowledge of symmetry groups. Artisans started up to pr oduce little wooden, ceramic or clay tiles and began to experiment with them by means of joining pieces whether edge to edge or vertex to vertex in that way so it can c over the plane without gaps. Economy in making floor or ceramic tiles could be most important reason to develop these procedures. This empiric way to develop tilings led not only to discover all uniform tilings but later discovering of aperiodic tilings.

Work-related health problems among resident immigrant workers in Italy and Spain

Background: in both Spain and Italy the number of immigrants has strongly increased in the last 20 years, currently representing more than the 10% of workforce in each country. The segregation of immigrants into unskilled or risky jobs brings negative consequences for their health. The objective of this study is to compare prevalence of work-related health problems between immigrants and native workers in Italy and Spain. Methods: data come from the Italian Labour Force Survey (n=65 779) and Spanish Working Conditions Survey (n=11 019), both conducted in 2007. We analyzed merged datasets to evaluate whether interviewees, both natives and migrants, judge their health being affected by their work conditions and, if so, which specific diseases. For migrants, we considered those coming from countries with a value of the Human Development Index lower than 0.85. Logistic regression models were used, including gender, age, and education as adjusting factors. Results: migrants reported skin diseases (Mantel-Haenszel pooled OR=1.49; 95%CI: 0.59-3.74) and musculoskeletal problems among those employed in agricultural sector (Mantel-Haenszel pooled OR=1.16; 95%CI: 0.69-1.96) more frequently than natives; country-specific analysis showed higher risks of musculoskeletal problems among migrants compared to the non-migrant population in Italy (OR=1.17; 95% CI: 0.48-1.59) and of respiratory problems in Spain (OR=2.02; 95%CI: 1.02-4.0). In both countries the risk of psychological stress was predominant among national workers. Conclusions: this collaborative study allows to strength the evidence concerning the health of migrant workers in Southern European countries.

Multilateral Interchange Fees: Competition and regulation in light of recent legislative developments. ECRI Research Report No. 14, 31 January 2014

Two-sided payment card markets generate costs that have to be distributed among the participating actors. For this purpose, payment card networks set an interchange fee, which is the fee paid by the merchant’s bank to the cardholder’s bank per transaction. While in recent years many antitrust authorities all over the world - including the European Commission - have opened proceedings against card brands in order to verify whether agreements to collectively establish the level of interchange fees are anticompetitive, the Reserve Bank of Australia – as a regulator - has directly tried to address market failures by lowering the level of interchange fees and changing some network rules. The US has followed with new legislation on financial consumer protection, which also intervenes on interchange fees. This has opened a strong debate not only on legitimacy of interchange fees, but also on the appropriateness of different public tools to address such issues. Drawing from economic and legal theories and a comparative analysis of recent case law in the EU and other jurisdictions, this work investigates whether a regulation rather than a purely competition policy approach would be more appropriate in this field, considering in particular, at EU level, all of the competition and regulatory concerns that have arisen from the operation of SEPA with multilateral interchange fees. The paper concludes that a wider regulation approach could address some of the shortcomings of a purely antitrust approach, proving to be highly beneficial to the development of an efficient European single payments area.

Actual and preferred work activites of mental health Occupational Therapists: Congruence or Discrepancy

The reform of Australian mental health services has resulted in new models of care and changed work practices for all mental health professionals. Occupational therapists today are as likely to be working in multidisciplinary teams performing a range of generic clinical roles as they are to be working in specialist rehabilitation units. These kinds of changes have taken place in other countries, with anecdotal and some empirical evidence that the changes have resulted in concerns about loss of professional identity and roles. This study sought to identify the current work activities carried out by occupational therapists and to determine whether there was a discrepancy between their actual and desired work activities. It was expected that, overall, they would indicate a preference to do more specialist rehabilitation focused work and less generic case management work. A survey of 196 occupational therapists investigated their actual and preferred work activities in 55 specific roles across four broad categories (senior administration, specialist clinical, general clinical and community development). As expected, the participants indicated that they would prefer to be undertaking more specialist rehabilitation oriented work activities than they were actually doing. Contrary to expectations, they also wished to undertake more rather than less generic clinical work activities, to be more engaged in community development work and to take on more senior and administrative roles. They indicated a preference for less rather than more activity on only 5 of the 55 work roles examined. On examining a subset of 113 participants who reported that 50% or more of their time was spent in case management, there was greater evidence of resistance to generic clinical roles. It was therefore concluded that occupational therapists in Australia are seeking to deploy their specialist skills to a greater degree than the current practice environment permits. They have broadly accepted the generic roles required in multidisciplinary community case management, but those who are actually working in these roles are most likely to have reservations about this kind of work.

Use of X-radiographs to distinguish members of the Montastraea annularis reef-coral species complex

Recent work suggests the Montastraea annularis species complex consists of at least three species, which can be distinguished qualitatively in the field using features related to colony growth (e.g. overall growth form. bumpiness, growth along the colony edge). However, when whole colonies are not available and surfaces are eroded, identification becomes problematic when relying on such characteristics. Characters based on internal skeletal structures are less prone to loss due to taphonomic processes. Previous work has shown that internal corallite architectural features measured in transverse thin sections can be used to distinguish species. To determine whether internal colony-level features measured on X-radiographs can be used. eight characters related to corallite budding and accretionary growth were measured on specimens representing three modern members of the M. annularis species complex (M. annularis, M. flaveolata and M. franksi), as well as two fossil forms (columnar and organ-pipe). All eight characters showed significant differences among species. Discriminant function analysis using seven of these characters resulted in distinct species groupings In canonical scores plots and a 100% classification success for specimens from Panama. These results suggest that measurements made on X-radiographs provide a useful tool for quantitatively distinguishing members of the M. annularis complex as well as between other massive reef corals.

Implicit learning is not subject to blocking

Explicit (aware) learning has been shown to evidence certain characteristics, such as extinction, blocking, occasion setting, and reliance on context. These characteristics have not been assessed in implicit (unaware) learning. The current study investigated whether implicit learning is subject to blocking. Participants completed a cued reaction time task, where they watched rapid presentations of a random sequence of 8 pairs of shapes, and responded to two target shapes. One target was always preceded by a cue. The experimental group completed a pretraining phase where half the cue, one shape, was followed by the target. Both experimental and control groups completed a training phase where both elements of the cue, two shapes, were followed by the target. Both aware and unaware participants evidenced learning, whereby responding was faster for cued than uncued targets. Aware participants in the experimental group responded faster to targets preceded by the pretrained element than by the other element of the cue. Control and unaware experimental participants were faster to respond to targets preceded by either element of the cue. As blocking was only evident in aware participants, but implicit learning was observed in all participants, it is concluded that implicit learning is not subject to blocking.

Babies, bodies and entitlement: gendered aspects of access to citizenship in the Republic of Ireland

Since the mid-1990s, automatic citizenship for children born in the Republic has been a source of growing debate against a backdrop of increasing immigration and the peace process. In June 2004, the debate culminated in a referendum, opening the way to a constitutional amendment that attaches residence qualifications to the hitherto unfettered entitlement to citizenship available through ius soli. Arguments for the amendment were couched in terms of a threat posed by Third World women having babies in Ireland to obtain residence, and a putative obligation to the EU to harmonise citizenship laws. This article explores how pregnant foreign women’s bodies became a site of perplexity about the borders of the twenty-first century Irish nation. It is therefore suggested that neither the ‘racial state’ theories nor feminist theories of the nation-state account fully for this. On closer inspection, the seemingly sui generis case of the Irish referendum is therefore fruitful in that it demands further reflection in terms of bridging gaps in the existing theory.

Getting diversity at work to work:what we know and what we still don’t know

Diversity has the potential to significantly benefit organizations by leading to positive work outcomes when diversity ‘works’. Unfortunately, not only is our knowledge limited as to the necessary conditions and the mechanisms by which diversity affects individual, work performance and organizational outcomes, but we still know very little about which diversity management practices are most effective in promoting positive outcomes. We analyse the literature on diversity and its management, and describe how the seven papers included in this section advance our understanding of what organizations can do to get diversity at work to work. Our discussion points to the need for more research on how diversity at multiple levels affects work and organizational outcomes; the development of integrative theory which takes into account that diversity might not only engender separation and variety but also disparity; as well as to the need for more empirical attention to the climates or cultures that facilitate the positive effects of diversity on work and organizational outcomes. We suggest that future research should also identify those people management practices that are most powerful in the creation of a positive diversity climate, and the factors that moderate and underlie its effects on work and organizational outcomes. We conclude with proposals about how this might be achieved. © 2013 The British Psychological Society.

Measurement of Training Intensity and Work During Submaximal Isokinetic Progressive Resistance Training Protocols

Physical exercise programmes are routinely prescribed in clinical practice to treat impairments, improve activity and participation in daily life because of their known physiological, health and psychological benefits (RCP, 2009). Progressive resistance exercise is a type of exercise prescribed specifically to improve skeletal muscle strength (Latham et al., 2004). The effectiveness of progressive resistance exercise varies considerably between studies and populations. This thesis focuses on how training parameters influence the delivery of progressive resistance exercise. In order to appropriately evaluate the influence of training parameters, this thesis argues the need to record training performance and the total work completed by participants as prescribed by training protocols. In the first study, participants were taken through a series of protocols differentiated by the intensity and volume of training. Training intensity was defined as a proportion of the mean peak torque achieved during maximal voluntary contractions and was set at 80% and 40% respectively of the MVC mean peak torque. Training volume was defined as the total external work achieved over the training period. Measures of training performance were developed to accurately report the intensity, repetitions and work completed during the training period. A second study evaluated training performance of the training protocols over repeated sessions. These protocols were then applied to 3 stroke survivors. Study 1 found sedentary participants could achieve a differentiated training intensity. Participants completing the high and low intensity protocols trained at 80% and 40% respectively of the MVC mean peak torque. The total work achieved in the high intensity low repetition protocol was lower than the total work achieved in the low intensity high repetition protocol. With repeated practice, study 2 found participants were able to improve in their ability to perform manoeuvres as shown by a reduction in the variation of the mean training intensity achieving total work as specified by the protocol to a lower margin of error. When these protocols were applied to 3 stroke survivors, they were able to achieve the specified training intensity but they were not able to achieve the total work as expected for the protocol. This is likely to be due to an inability in achieving a consistent force throughout the contraction. These results demonstrate evaluation of training characteristics and support the need to record and report training performance characteristics during progressive resistance exercise, including the total work achieved, in order to elucidate the influence of training parameters on progressive resistance exercise. The lack of accurate training performance may partly explain the inconsistencies between studies on optimal training parameters for progressive resistance exercise.

Do “The Best Companies to Work” have higher Stock returns?

Do “The Best Companies to Work” have Higher Stock Returns? The main purpose of this work is to prove the link between job satisfaction and the firm’s value. The «Best Companies to Work» list give us our measure for job satisfaction. The sample of this work is composed by firms listed in STOXX Europe 600 Index. We compared the monthly returns of a portfolio composed by firms present in the «Best Companies to Work» list with two other benchmark portfolios, using the four-factor model proposed by Carhart (1997), from January 2010 to December 2014. Our results show that the BCWE600 portfolio outperforms both benchmark portfolios. In other words, companies classified as Best Companies to Work generated 0.40%/month and 4.94%/year higher stock returns than their peers over the 2010-2014 period. Also, the market risk in portfolio BCWE600 is inferior compared to other portfolios. This work shows that firms with the most satisfied workers get better results, resulting in higher returns for it’s shareholders.

Brite phase 1 report to industry : innovate – now

Trying to innovate or wanting to? Making a start is the most difficult step on any journey. Whether trying to innovate for the first time, or seeking improvements on current performance, organisations are confronted with a plethora of options. Innovate ― Now! makes action easier by presenting some of the key considerations for improving innovation performance. This guide has been based on the outcomes of a survey and case studies conducted between 2003 and 2005 in the Australian property and construction industry and therefore contains unique and up-to-date information, examples and suggestions tailored specifically to your industry needs.

'We just make the pictures...?' How work is portrayed in children's feature length films

This article explores how adult paid work is portrayed in 'family' feature length films. The study extends previous critical media literature which has overwhelmingly focused on depictions of gender and violence, exploring the visual content of films that is relevant to adult employment. Forty-two G/PG films were analyzed for relevant themes. Consistent with the exploratory nature of the research, themes emerged inductively from the films' content. Results reveal six major themes: males are more visible in adult work roles than women; the division of labour remains gendered; work and home are not mutually exclusive domains; organizational authority and power is wielded in punitive ways; there are avenues to better employment prospects; and status/money is paramount. The findings of the study reflect a range of subject matters related to occupational characteristics and work-related communication and interactions which are typically viewed by children in contemporary society.

Safer construction : the development of a guide to best practice

In Australia, an average 49 building and construction workers have been killed at work each year since 1997-98. Building/construction workers are more than twice as likely to be killed at work, than the average worker in all Australian industries. The ‘Safer Construction’ project, funded by the CRC-Construction Innovation and led by a task force comprising representatives of construction clients, designers and constructors, developed a Guide to Best Practice for Safer Construction. The Guide, which was informed by research undertaken at RMIT University, Queensland University of Technology and Curtin University, establishes broad principles for the improvement of safety in the industry and provides a ‘roadmap’ for improvement based upon lifecycle stages of a building/construction project. Within each project stage, best practices for the management of safety are identified. Each best practice is defined in terms of the recommended action, its key benefits, desirable outcomes, performance measures and leadership. ‘Safer Construction’ practices are identified from the planning to commissioning stages of a project. The ‘Safer Construction’ project represents the first time that key stakeholder groups in the Australian building/construction industry have worked together to articulate best practice and establish an appropriate basis for allocating (and sharing) responsibility for project safety performance.