Transformer modeling ATP : internal faults & high-frequency discretization

Power transformers are key components of the power grid and are also one of the most subjected to a variety of power system transients. The failure of a large transformer can cause severe monetary losses to a utility, thus adequate protection schemes are of great importance to avoid transformer damage and maximize the continuity of service. Computer modeling can be used as an efficient tool to improve the reliability of a transformer protective relay application. Unfortunately, transformer models presently available in commercial software lack completeness in the representation of several aspects such as internal winding faults, which is a common cause of transformer failure. It is also important to adequately represent the transformer at frequencies higher than the power frequency for a more accurate simulation of switching transients since these are a well known cause for the unwanted tripping of protective relays. This work develops new capabilities for the Hybrid Transformer Model (XFMR) implemented in ATPDraw to allow the representation of internal winding faults and slow-front transients up to 10 kHz. The new model can be developed using any of two sources of information: 1) test report data and 2) design data. When only test-report data is available, a higher-order leakage inductance matrix is created from standard measurements. If design information is available, a Finite Element Model is created to calculate the leakage parameters for the higher-order model. An analytical model is also implemented as an alternative to FEM modeling. Measurements on 15-kVA 240?/208Y V and 500-kVA 11430Y/235Y V distribution transformers were performed to validate the model. A transformer model that is valid for simulations for frequencies above the power frequency was developed after continuing the division of windings into multiple sections and including a higher-order capacitance matrix. Frequency-scan laboratory measurements were used to benchmark the simulations. Finally, a stability analysis of the higher-order model was made by analyzing the trapezoidal rule for numerical integration as used in ATP. Numerical damping was also added to suppress oscillations locally when discontinuities occurred in the solution. A maximum error magnitude of 7.84% was encountered in the simulated currents for different turn-to-ground and turn-to-turn faults. The FEM approach provided the most accurate means to determine the leakage parameters for the ATP model. The higher-order model was found to reproduce the short-circuit impedance acceptably up to about 10 kHz and the behavior at the first anti-resonant frequency was better matched with the measurements.

Two-Phase Flow In Microchannels: Morphology And Interface Phenomena

The existence and morphology, as well as the dynamics of micro-scale gas-liquid interfaces is investigated numerically and experimentally. These studies can be used to assess liquid management issues in microsystems such as PEMFC gas flow channels, and are meant to open new research perspectives in two-phase flow, particularly in film deposition on non-wetting surfaces. For example the critical plug volume data can be used to deliver desired length plugs, or to determine the plug formation frequency. The dynamics of gas-liquid interfaces, of interest for applications involving small passages (e.g. heat exchangers, phase separators and filtration systems), was investigated using high-speed microscopy - a method that also proved useful for the study of film deposition processes. The existence limit for a liquid plug forming in a mixed wetting channel is determined by numerical simulations using Surface Evolver. The plug model simulate actual conditions in the gas flow channels of PEM fuel cells, the wetting of the gas diffusion layer (GDL) side of the channel being different from the wetting of the bipolar plate walls. The minimum plug volume, denoted as critical volume is computed for a series of GDL and bipolar plate wetting properties. Critical volume data is meant to assist in the water management of PEMFC, when corroborated with experimental data. The effect of cross section geometry is assessed by computing the critical volume in square and trapezoidal channels. Droplet simulations show that water can be passively removed from the GDL surface towards the bipolar plate if we take advantage on differing wetting properties between the two surfaces, to possibly avoid the gas transport blockage through the GDL. High speed microscopy was employed in two-phase and film deposition experiments with water in round and square capillary tubes. Periodic interface destabilization was observed and the existence of compression waves in the gas phase is discussed by taking into consideration a naturally occurring convergent-divergent nozzle formed by the flowing liquid phase. The effect of channel geometry and wetting properties was investigated through two-phase water-air flow in square and round microchannels, having three static contact angles of 20, 80 and 105 degrees. Four different flow regimes are observed for a fixed flow rate, this being thought to be caused by the wetting behavior of liquid flowing in the corners as well as the liquid film stability. Film deposition experiments in wetting and non-wetting round microchannels show that a thicker film is deposited for wetting conditions departing from the ideal 0 degrees contact angle. A film thickness dependence with the contact angle theta as well as the Capillary number, in the form h_R ~ Ca^(2/3)/ cos(theta) is inferred from scaling arguments, for contact angles smaller than 36 degrees. Non-wetting film deposition experiments reveal that a film significantly thicker than the wetting Bretherton film is deposited. A hydraulic jump occurs if critical conditions are met, as given by a proposed nondimensional parameter similar to the Froude number. Film thickness correlations are also found by matching the measured and the proposed velocity derived in the shock theory. The surface wetting as well as the presence of the shock cause morphological changes in the Taylor bubble flow.

Contribución al estudio de dos conceptos básicos de la lógica fuzzy

La tesis doctoral CONTRIBUCIÓN AL ESTUDIO DE DOS CONCEPTOS BÁSICOS DE LA LÓGICA FUZZY constituye un conjunto de nuevas aportaciones al análisis de dos elementos básicos de la lógica fuzzy: los mecanismos de inferencia y la representación de predicados vagos. La memoria se encuentra dividida en dos partes que corresponden a los dos aspectos señalados. En la Parte I se estudia el concepto básico de «estado lógico borroso». Un estado lógico borroso es un punto fijo de la aplicación generada a partir de la regla de inferencia conocida como modus ponens generalizado. Además, un preorden borroso puede ser representado mediante los preórdenes elementales generados por el conjunto de sus estados lógicos borrosos. El Capítulo 1 está dedicado a caracterizar cuándo dos estados lógicos dan lugar al mismo preorden elemental, obteniéndose también un representante de la clase de todos los estados lógicos que generan el mismo preorden elemental. El Capítulo finaliza con la caracterización del conjunto de estados lógicos borrosos de un preorden elemental. En el Capítulo 2 se obtiene un subconjunto borroso trapezoidal como una clase de una relación de indistinguibilidad. Finalmente, el Capítulo 3 se dedica a estudiar dos tipos de estados lógicos clásicos: los irreducibles y los minimales. En el Capítulo 4, que inicia la Parte II de la memoria, se aborda el problema de obtener la función de compatibilidad de un predicado vago. Se propone un método, basado en el conocimiento del uso del predicado mediante un conjunto de reglas y de ciertos elementos distinguidos, que permite obtener una expresión general de la función de pertenencia generalizada de un subconjunto borroso que realice la función de extensión del predicado borroso. Dicho método permite, en ciertos casos, definir un conjunto de conectivas multivaluadas asociadas al predicado. En el último capítulo se estudia la representación de antónimos y sinónimos en lógica fuzzy a través de auto-morfismos. Se caracterizan los automorfismos sobre el intervalo unidad cuando sobre él se consideran dos operaciones: una t-norma y una t-conorma ambas arquimedianas. The PhD Thesis CONTRIBUCIÓN AL ESTUDIO DE DOS CONCEPTOS BÁSICOS DE LA LÓGICA FUZZY is a contribution to two basic concepts of the Fuzzy Logic. It is divided in two parts, the first is devoted to a mechanism of inference in Fuzzy Logic, and the second to the representation of vague predicates. «Fuzzy Logic State» is the basic concept in Part I. A Fuzzy Logic State is a fixed-point for the mapping giving the Generalized Modus Ponens Rule of inference. Moreover, a fuzzy preordering can be represented by the elementary preorderings generated by its Fuzzy Logic States. Chapter 1 contemplates the identity of elementary preorderings and the selection of representatives for the classes modulo this identity. This chapter finishes with the characterization of the set of Fuzzy Logic States of an elementary preordering. In Chapter 2 a Trapezoidal Fuzzy Set as a class of a relation of Indistinguishability is obtained. Finally, Chapter 3 is devoted to study two types of Classical Logic States: irreducible and minimal. Part II begins with Chapter 4 dealing with the problem of obtaining a Compa¬tibility Function for a vague predicate. When the use of a predicate is known by means of a set of rules and some distinguished elements, a method to obtain the general expression of the Membership Function is presented. This method allows, in some cases, to reach a set of multivalued connectives associated to the predicate. Last Chapter is devoted to the representation of antonyms and synonyms in Fuzzy Logic. When the unit interval [0,1] is endowed with both an archimedean t-norm and a an archi-medean t-conorm, it is showed that the automorphisms' group is just reduced to the identity function.

Selección de alternativas para el tratamiento de depósitos de residuos radiactivos bajo una respectiva multiatributo borrosa.

La planta química Pridneprovsky fue una de las empresas mas grandes de procesamiento de uranio de la antigua URSS. Los depósitos de Zapadnoe contienen la mayoría de estos residuos. Proponemos un marco teórico basado en el Análisis de Decisión Multicriterio y la Lógica Borrosa para analizar diferentes alternativas de remediación de los residuos Zapadnoe, en las que objetivos económicos, sociales y ambientales potencialmente conflictivos entre sí son simultáneamente tenidos en cuenta. Se ha construido una jerarquía de objetivos, que incluye todos los aspectos relevantes del problema, en la que se observa claramente los objetivos y atributos que son necesarios conseguir si se quieren alcanzar objetivos de un nivel superior. Se han usado conjuntos borrosos en lugar de valores exactos, para evaluar las alternativas de remediación en los diferentes criterios y cuanticar las preferencias del decisor. Para ello, se propone que las alternativas de remediación deben ser evaluadas por medio de una función de utilidad de multiatributo aditiva. Este método producirá una utilidad esperada para cada alternativa representada por medio de un numero borroso trapezoidal. Finalmente se usará un algoritmo de ordenamiento de números borrosos para elegir la mejor alternativa.

Dominance intensity measure within fuzzy weight oriented MAUT: an application

We introduce a dominance intensity measuring method to derive a ranking of alternatives to deal with incomplete information in multi-criteria decision-making problems on the basis of multi-attribute utility theory (MAUT) and fuzzy sets theory. We consider the situation where there is imprecision concerning decision-makers’ preferences, and imprecise weights are represented by trapezoidal fuzzy weights.The proposed method is based on the dominance values between pairs of alternatives. These values can be computed by linear programming, as an additive multi-attribute utility model is used to rate the alternatives. Dominance values are then transformed into dominance intensity measures, used to rank the alternatives under consideration. Distances between fuzzy numbers based on the generalization of the left and right fuzzy numbers are utilized to account for fuzzy weights. An example concerning the selection of intervention strategies to restore an aquatic ecosystem contaminated by radionuclides illustrates the approach. Monte Carlo simulation techniques have been used to show that the proposed method performs well for different imprecision levels in terms of a hit ratio and a rank-order correlation measure.

A fuzzy approach to risk analysis in information systems

Assets are interrelated in risk analysis methodologies for information systems promoted by international standards. This means that an attack on one asset can be propagated through the network and threaten an organization's most valuable assets. It is necessary to valuate all assets, the direct and indirect asset dependencies, as well as the probability of threats and the resulting asset degradation. These methodologies do not, however, consider uncertain valuations and use precise values on different scales, usually percentages. Linguistic terms are used by the experts to represent assets values, dependencies and frequency and asset degradation associated with possible threats. Computations are based on the trapezoidal fuzzy numbers associated with these linguistic terms.

A fuzzy MCDA framework for safety assessment in the remediation of a uranium mill tailings site in Ukraine

The Pridneprovsky Chemical Plant was one of the largest uranium processing enterprises in the former USSR, producing a huge amount of uranium residues. The Zapadnoe tailings site contains most of these residues. We propose a theoretical framework based on multicriteria decision analysis and fuzzy logic to analyze different remediation alternatives for the Zapadnoe tailings, which simultaneously accounts for potentially conflicting economic, social and environmental objectives. We build an objective hierarchy that includes all the relevant aspects. Fuzzy rather than precise values are proposed for use to evaluate remediation alternatives against the different criteria and to quantify preferences, such as the weights representing the relative importance of criteria identified in the objective hierarchy. Finally, we suggest that remediation alternatives should be evaluated by means of a fuzzy additive multi-attribute utility function and ranked on the basis of the respective trapezoidal fuzzy number representing their overall utility.

A fuzzy extension of MAGERIT methodology for risk analysis in information systems

We propose a fuzzy approach to deal with risk analysis for information systems. We extend MAGERIT methodology that valuates the asset dependencies to a fuzzy framework adding fuzzy linguistic terms to valuate the different elements (terminal asset values, asset dependencies as well as the probability of threats and the resulting asset degradation) in risk analysis. Computations are based on the trapezoidal fuzzy numbers associated with these linguistic terms and, finally, the results of these operations are translated into a linguistic term by means of a similarity function.

Caracterización multivariada de los temporales para su aplicación en el dimensionamiento del manto principal

En esta tesis se presenta una metodología para la caracterización del oleaje, dentro del marco de las nuevas Recomendaciones para Obras Marítimas (ROM 0.0.-00 y ROM 1.0-09), por ser una de las principales acciones que afectan a la estabilidad de las estructuras marítimas. Debido al carácter aleatorio intrínsecamente multivariado de la acción considerada, las tormentas, su caracterización paramétrica se realiza en términos de funciones cópula uniparamétricas. Las variables consideradas son altura de ola significante del pico de la tormenta, el periodo medio asociado y la magnitud, o número de olas, de todo el ciclo de solicitación. Para establecer un patrón teórico de evolución de la tormenta que permita extrapolar las muestras fuera de la región con datos se analizan los modelos teóricos existentes, comprobándose que no reproducen adecuadamente las tormentas constituidas por estados de mar con un peso importante de oleaje swell. Para evitar esta limitación se proponen cuatro modelos teóricos de evolución de tormentas con distintas formas geométricas. El análisis de los modelos existentes y los propuestos pone de relieve que el Modelo Magnitud Equivalente de Tormenta (EMS= Equivalent Magnitude Storm) con la forma triangular es el que mejor adapta las tormentas constituidas por estados de mar típicos del viento. Para tormentas con un mayor grado de desarrollo, el modelo teórico de tormenta EMS con la forma trapezoidal es el adecuado. De las aproximaciones propuestas para establecer el periodo medio de los sucesivos estados de mar del ciclo de solicitación. la propuesta por Martín Soldevilla et al., (2009) es la más versátil y , en general , mejor reproduce la evolución de todo tipo de tormentas. La caracterización de las tormentas se complementa con la altura de ola máxima. Debido a la mayor disponibilidad y longitud temporal de los datos sintéticos frente a las registros, la práctica totalidad de los análisis de extremos se realizan con tormentas sintéticas en las que la distribución de olas individuales es desconocida. Para evitar esta limitación se utilizan modelos teóricos de distribución de olas acordes a las características de cada uno de los estados de mar que conforman la tormenta sintética. Para establecer dichas características se utiliza la curtosis y en función de su valor la altura de ola máxima se determina asumiendo una determinada distribución de olas. Para estados de mar lineales la distribución de olas individuales de Rayleigh es la considerada. Para condiciones no lineales de gran ancho de banda el modelo de distribución de olas propuesto por Dawson, (2004) es el utilizado y si es de banda estrecha las predicciones de (Boccotti, (1989), Boccotti et al., (2013)) se compara con las resultantes del modelo de Dawson. La caracterización de la evolución de las tormentas en términos multivariados es aplicada al estudio de la progresión del daño del manto principal de diques en talud, y al rebase de las olas. Ambos aspectos cubren el segundo objetivo de la tesis en el que se propone una nueva formulación para el dimensionamiento de mantos constituidos por bloques cúbicos de hormigón. Para el desarrollo de esta nueva formulación se han utilizado los resultados recogidos en los estudios de estabilidad del manto principal de diques talud realizados en modelo físico a escala reducida en el Centro de Estudios de Puertos y Costas (CEDEX) desde la década de los 80 empleando, en su mayoría, bloques paralelepípedos cúbicos de hormigón. Por este motivo y porque los últimos diques construidos en la costa Española utilizan este tipo de pieza, es por lo que la formulación planteada se centra en este tipo de pieza. Después de un primer análisis de las fórmulas de cálculo y de evolución existentes, se llega a la conclusión de que es necesario realizar un esfuerzo de investigación en este campo, así como ensayos en laboratorio y recogida de datos in-situ con base a desarrollar fórmulas de evolución de daño para mantos constituidos por piezas diferentes a la escollera, que tenga en cuenta las principales variables que condiciona su estabilidad. En esta parte de la tesis se propone un método de análisis de evolución de daño, que incluye el criterio de inicio de avería, adecuada para diques en talud constituidos por bloque cúbicos de hormigón y que considera la incidencia oblicua, el daño acumulado y el rebase. This thesis proposes a methodology to estimate sea waves, one of the main actions affecting the maritime structures stability, complying with (ROM 0.0.-00 & ROM 1.0-09.Due to the multivariate behavior of sea storms, the characterization of the structures of sea storms is done using copula function. The analyzed variables are the significant height wave, mean period and magnitude or number of waves during the storm history. The storm evolution in terms of the significant height wave and the mean period is also studied in other to analyze the progressive failure modes. The existing models of evolution are studied, verifying that these approximations do not adjust accurately for developed waves. To overcome this disadvantage, four evolution models are proposed, with some geometrical shapes associated to fit any development degree. The proposed Equivalent Magnitude Storm model, EMS, generally obtains the best results for any kind of storm (predominant sea, swell or both). The triangle is recommended for typical sea storms whereas the trapezoid shape is much more appropriate for more developed storm conditions.The Martín Soldevilla et al., (2009) approach to estimate the mean period is better than others approaches used.The storm characterization is completed with the maximum wave height of the whole storm history. Due to synthetic historical waves databases are more accessible and longer than recorded database, the extreme analyses are done with synthetic data. For this reason the individual waves’ distribution is not known. For that limitation to be avoided, and depending on the characteristics of every sea states, one theoretical model of waves is choose and used. The kurtosis parameter is used to distinguish between linear and nonlinear sea states. The Rayleigh model is used for the linear sea states. For the nonlinear sea states, Dawson, (2004) approach is used for non-narrow bandwidth storms, comparing the results with the Boccotti, (1989), Boccotti et al., (2013) approach, with is used for narrow bandwidth storms. The multivariate and storm evolution characterization is used to analyze of stone armour damage progression and wave overtopping discharge. Both aspects are included in the second part of the thesis, with a new formula is proposed to design cubes armour layer. The results the stability studies of armour layer, done in the Centre for Harbours and Coastal Studies (CEDEX) laboratory are used for defining a new stability formula. For this reason and because the last biggest breakwater built in Spain using the cube, the damage progression is analyze for this kind of concrete block. Before to analyze the existing formulae, it is concluded that it is necessary more investigation, more tests in laboratory and data gathering in situ to define damage evolution formulae to armour of other kind of pieces and that takes to account the principal variables. This thesis proposed a method to calculate the damage progression including oblique waves, accumulated damage, and overtopping effect. The method also takes account the beginning of the movement of the blocks.

Edificio judicial en El Ejido

La sede judicial en El Ejido, edificio de planta trapezoidal de 47 m x 55 / 26 m, presenta dos volúmenes claramente diferenciados, unidos a nivel de sótano y conectados mediante pasarelas en niveles superiores. Una tercera pieza, de planta trapezoidal y fachada frontal de muro cortina de vidrio, vuela 8 m del plano vertical del edificio más alto. La fachada principal desempeña una función estructural de pantalla y está constituida por 9 filas de pilares prefabricados de hormigón armado entre las que se intercalan unos cordones horizontales de hormigón autocompactante, ejecutados in situ. Debido a la ubicación del edificio en una zona sísmica y el reducido número de apoyos horizontales, la fachada resulta potencialmente vulnerable. Para mitigar los elevados riesgos, particularmente durante las fases constructivas, se hacía necesaria una planificación rigurosa de todo el proceso sobre la base de un análisis específico de la interacción entre la estructura evolutiva de la fachada y la cimbra empleada en su construcción.

Fuzzy MCDA for remediation of a uranium tailing

The Pridneprovsky Chemical Plant was a largest uranium processing enterprises, producing a huge amount of uranium residues. The Zapadnoe tailings site contains the majority of these residues. We propose a theoretical framework based on Multi-Criteria Decision Analysis and fuzzy logic to analyse different remediation alternatives for the Zapadnoe tailings, in which potentially conflicting economic, radiological, social and environmental objectives are simultaneously taken into account. An objective hierarchy is built that includes all the relevant aspects. Fuzzy rather than precise values are proposed for use to evaluate remediation alternatives against the different criteria and to quantify preferences, such as the weights representing the relative importance of criteria identified in the objective hierarchy. Finally, it is proposed that remediation alternatives should be evaluated by means of a fuzzy additive multi-attribute utility function and ranked on the basis of the respective trapezoidal fuzzy number representing their overall utility.

Toma de decisiones en grupo con información parcial y veto basada en medidas de la intensidad de dominancia

En la mayoría de problemas de decisión a los que nos enfrentamos no hay evidencia sobre cuál es la mejor elección debido a la complejidad de los mismos. Esta complejidad está asociada a la existencia de múltiples objetivos conflictivos y a que en muchos casos solo se dispone de información incompleta o imprecisa sobre los distintos parámetros del modelo de decisión. Por otro lado, el proceso de toma de decisiones se puede realizar en grupo, debiendo incorporar al modelo las preferencias individuales de cada uno de los decisores y, posteriormente, agregarlas para alcanzar un consenso final, lo que dificulta más todavía el proceso de decisión. La metodología del Análisis de Decisiones (AD) es un procedimiento sistemático y lógico que permite estructurar y simplificar la tarea de tomar decisiones. Utiliza la información existente, datos recogidos, modelos y opiniones profesionales para cuantificar la probabilidad de los valores o impactos de las alternativas y la Teoría de la Utilidad para cuantificar las preferencias de los decisores sobre los posibles valores de las alternativas. Esta tesis doctoral se centra en el desarrollo de extensiones del modelo multicriterio en utilidad aditivo para toma de decisiones en grupo con veto en base al AD y al concepto de la intensidad de la dominancia, que permite explotar la información incompleta o imprecisa asociada a los parámetros del modelo. Se considera la posibilidad de que la importancia relativa que tienen los criterios del problema para los decisores se representa mediante intervalos de valores o información ordinal o mediante números borrosos trapezoidales. Adicionalmente, se considera que los decisores tienen derecho a veto sobre los valores de los criterios bajo consideración, pero solo un subconjunto de ellos es efectivo, teniéndose el resto solo en cuenta de manera parcial. ABSTRACT In most decision-making problems, the best choice is unclear because of their complexity. This complexity is mainly associated with the existence of multiple conflicting objectives. Besides, there is, in many cases, only incomplete or inaccurate information on the various decision model parameters. Alternatively, the decision-making process may be performed by a group. Consequently, the model must account for individual preferences for each decision-maker (DM), which have to be aggregated to reach a final consensus. This makes the decision process even more difficult. The decision analysis (DA) methodology is a systematic and logical procedure for structuring and simplifying the decision-making task. It takes advantage of existing information, collected data, models and professional opinions to quantify the probability of the alternative values or impacts and utility theory to quantify the DM’s preferences concerning the possible alternative values. This PhD. thesis focuses on developing extensions for a multicriteria additive utility model for group decision-making accounting for vetoes based on DA and on the concept of dominance intensity in order to exploit incomplete or imprecise information associated with the parameters of the decision-making model. We consider the possibility of the relative importance of criteria for DMs being represented by intervals or ordinal information, or by trapezoidal fuzzy numbers. Additionally, we consider that DMs are allowed to provide veto values for the criteria under consideration, of which only a subset are effective, whereas the remainder are only partially taken into account.

Simulación eficiente de mecanismos flexibles mediante formulaciones topológicas

El objetivo de esta Tesis es presentar un método eficiente para la evaluación de sistemas multi-cuerpo con elementos flexibles con pequeñas deformaciones, basado en métodos topológicos para la simulación de sistemas tan complejos como los que se utilizan en la práctica y en tiempo real o próximo al real. Se ha puesto un especial énfasis en la resolución eficiente de aquellos aspectos que conllevan mayor coste computacional, tales como la evaluación de las ecuaciones dinámicas y el cálculo de los términos de inercia. Las ecuaciones dinámicas se establecen en función de las variables independientes del sistema, y la integración de las mismas se realiza mediante formulaciones implícitas de index-3. Esta Tesis se articula en seis Capítulos. En el Capítulo 1 se realiza una revisión bibliográfica de la simulación de sistemas flexibles y los métodos más relevantes de integración de las ecuaciones diferenciales del movimiento. Asimismo, se presentan los objetivos de esta Tesis. En el Capítulo 2 se presenta un método semi-recursivo para la evaluación de las ecuaciones de los sistemas multi-cuerpo con elementos flexibles basado en formulaciones topológicas y síntesis modal. Esta Tesis determina la posición de cada punto del cuerpo flexible en función de un sistema de referencia flotante que se mueve con dicho cuerpo y de las amplitudes de ciertos modos de deformación calculados a partir de un mallado obtenido mediante el Método de Elementos Finitos. Se presta especial atención en las condiciones de contorno que se han de tener en cuenta a la hora de establecer las variables que definen la deformación del cuerpo flexible. El Capítulo 3 se centra en la evaluación de los términos de inercia de los sistemas flexibles que generalmente conllevan un alto coste computacional. Se presenta un método que permite el cálculo de dichos términos basado en el uso de 24 matrices constantes que pueden ser calculadas previamente al proceso de integración. Estas matrices permiten evaluar la matriz de masas y el vector de fuerzas de inercia dependientes de la velocidad sin que sea necesario evaluar la posición deformada de todos los puntos del cuerpo flexible. Se realiza un análisis pormenorizado de dichas matrices con el objetivo de optimizar su cálculo estableciendo aproximaciones que permitan reducir el número de dichos términos y optimizar aún más su evaluación. Se analizan dos posibles simplificaciones: la primera utiliza una discretización no-consistente basada en elementos finitos en los que se definen únicamente los desplazamientos axiales de los nodos; en la segunda propuesta se hace uso de una matriz de masas concentradas (Lumped Mass). Basándose en la formulación presentada, el Capítulo 4 aborda la integración eficiente de las ecuaciones dinámicas. Se presenta un método iterativo para la integración con fórmulas de index-3 basado en la proyección de las ecuaciones dinámicas según las variables independientes del sistema multi-cuerpo. El cálculo del residuo del sistema de ecuaciones no lineales que se ha de resolver de modo iterativo se realiza mediante un proceso recursivo muy eficiente que aprovecha la estructura topológica del sistema. Se analizan tres formas de evaluar la matriz tangente del citado sistema no lineal: evaluación aproximada, numérica y recursiva. El método de integración presentado permite el uso de distintas fórmulas. En esta Tesis se analizan la Regla Trapezoidal, la fórmula BDF de segundo orden y un método híbrido TR-BDF2. Para este último caso se presenta un algoritmo de paso variable. En el Capítulo 5 plantea la implementación del método propuesto en un programa general de simulación de mecanismos que permita la resolución de cualquier sistema multi-cuerpo definiéndolo mediante un fichero de datos. La implementación de este programa se ha realizado tanto en C++ como en Java. Se muestran los resultados de las formulaciones presentadas en esta Tesis mediante la simulación de cuatro ejemplos de distinta complejidad. Mediante análisis concretos se comparan la formulación presentada con otras existentes. También se analiza el efecto del lenguaje de programación utilizado en la implementación y los efectos de las posibles simplificaciones planteadas. Por último, el Capítulo 6 resume las principales conclusiones alcanzadas en la Tesis y las futuras líneas de investigación que con ella se abren. ABSTRACT This Thesis presents an efficient method for solving the forward dynamics of a multi-body sys-tem formed by rigid and flexible bodies with small strains for real-time simulation of real-life models. It is based on topological formulations. The presented work focuses on the efficient solution of the most time-consuming tasks of the simulation process, such as the numerical integration of the motion differential equations and in particular the evaluation of the inertia terms corresponding to the flexible bodies. The dynamic equations are formulated in terms of independent variables of the muti-body system, and they are integrated by means of implicit index-3 formulae. The Thesis is arranged in six chapters. Chapter 1 presents a review of the most relevant and recent contributions related to the modelization of flexible multi-body systems and the integration of the corresponding dynamic equations. The main objectives of the Thesis are also presented in detail. Chapter 2 presents a semi-recursive method for solving the equations of a multi-body system with flexible bodies based on topological formulations and modal synthesis. This Thesis uses the floating frame approach and the modal amplitudes to define the position of any point at the flexible body. These modal deformed shapes are obtained by means of the Finite Element Method. Particular attention has been taken to the boundary conditions used to define the deformation of the flexible bodies. Chapter 3 focuses on the evaluation of the inertia terms, which is usually a very time-consuming task. A new method based on the use of 24 constant matrices is presented. These matrices are evaluated during the set-up step, before the integration process. They allow the calculation of the inertia terms in terms of the position and orientation of the local coordinate system and the deformation variables, and there is no need to evaluate the position and velocities of all the nodes of the FEM mesh. A deep analysis of the inertia terms is performed in order to optimize the evaluation process, reducing both the terms used and the number of arithmetic operations. Two possible simplifications are presented: the first one uses a non-consistent approach in order to define the inertia terms respect to the Cartesian coordinates of the FEM mesh, rejecting those corresponding to the angular rotations; the second approach makes use of lumped mass matrices. Based on the previously presented formulation, Chapter 4 is focused on the numerical integration of the motion differential equations. A new predictor-corrector method based on index-3 formulae and on the use of multi-body independent variables is presented. The evaluation of the dynamic equations in a new time step needs the solution of a set on nonlinear equations by a Newton-Raphson iterative process. The computation of the corresponding residual vector is performed efficiently by taking advantage of the system’s topological structure. Three methods to compute the tangent matrix are presented: an approximated evaluation that considers only the most relevant terms, a numerical approach based on finite differences and a recursive method that uses the topological structure. The method presented for integrating the dynamic equations can use a variety of integration formulae. This Thesis analyses the use of the trapezoidal rule, the 2nd order BDF formula and the hybrid TR-BDF2 method. A variable-time step strategy is presented for the last one. Chapter 5 describes the implementation of the proposed method in a general purpose pro-gram for solving any multibody defined by a data file. This program is implemented both in C++ and Java. Four examples are used to check the validity of the formulation and to compare this method with other methods commonly used to solve the dynamic equations of multi-body systems containing flexible bodies. The efficiency of the programming methodology used and the effect of the possible simplifications proposed are also analyzed. Chapter 6 summarizes the main Conclusions obtained in this Thesis and the new lines of research that have been opened.

Improvement of theoretical storm characterization for different climate conditions

The different theoretical models related with storm wave characterization focus on determining the significant wave height of the peak storm, the mean period and, usually assuming a triangle storm shape, their duration. In some cases, the main direction is also considered. Nevertheless, definition of the whole storm history, including the variation of the main random variables during the storm cycle is not taken into consideration. The representativeness of the proposed storm models, analysed in a recent study using an empirical maximum energy flux time dependent function shows that the behaviour of the different storm models is extremely dependent on the climatic characteristics of the project area. Moreover, there are no theoretical models able to adequately reproduce storm history evolution of the sea states characterized by important swell components. To overcome this shortcoming, several theoretical storm shapes are investigated taking into consideration the bases of the three best theoretical storm models, the Equivalent Magnitude Storm (EMS), the Equivalent Number of Waves Storm (ENWS) and the Equivalent Duration Storm (EDS) models. To analyse the representativeness of the new storm shape, the aforementioned maximum energy flux formulation and a wave overtopping discharge structure function are used. With the empirical energy flux formulation, correctness of the different approaches is focussed on the progressive hydraulic stability loss of the main armour layer caused by real and theoretical storms. For the overtopping structure equation, the total volume of discharge is considered. In all cases, the results obtained highlight the greater representativeness of the triangular EMS model for sea waves and the trapezoidal (nonparallel sides) EMS model for waves with a higher degree of wave development. Taking into account the increase in offshore and shallow water wind turbines, maritime transport and deep vertical breakwaters, the maximum wave height of the whole storm history and that corresponding to each sea state belonging to its cycle's evolution is also considered. The procedure considers the information usually available for extreme waves' characterization. Extrapolations of the maximum wave height of the selected storms have also been considered. The 4th order statistics of the sea state belonging to the real and theoretical storm have been estimated to complete the statistical analysis of individual wave height

Independent determination of symmetry and polarity in the Drosophila eye.

In each facet of the Drosophila compound eye, a cluster of photoreceptor cells assumes an asymmetric trapezoidal pattern. These clusters have opposite orientations above and below an equator, showing global dorsoventral mirror symmetry. However, in the mutant spiny legs, the polarization of each cluster appears to be random, so that no equator is evident. The apparent lack of an equator suggests that spiny legs+ may be involved in the establishment of global dorsoventral identity that might be essential for proper polarization of the photoreceptor clusters. Alternatively, a global dorsoventral pattern could be present, but spiny legs+ may be required for local polarization of individual clusters. Using an enhancer trap strain in which white+ gene expression is restricted to the dorsal field, we show that white+ expression in spiny legs correctly respects dorsoventral position even in facets with inappropriate polarizations; the dorsoventral boundary is indeed present, whereas the mechanism for polarization is perturbed. It is suggested that the boundary is established before the action of spiny legs+ by an independent mechanism.