An Enhanced WLAN Security System With FPGA Implementation for Multimedia Applications

Maintaining a high level of data security with a low impact on system performance is more challenging in wireless multimedia applications. Protocols that are used for wireless local area network (WLAN) security are known to significantly degrade performance. In this paper, we propose an enhanced security system for a WLAN. Our new design aims to decrease the processing delay and increase both the speed and throughput of the system, thereby making it more efficient for multimedia applications. Our design is based on the idea of offloading computationally intensive encryption and authentication services to the end systems’ CPUs. The security operations are performed by the hosts’ central processor (which is usually a powerful processor) before delivering the data to a wireless card (which usually has a low-performance processor). By adopting this design, we show that both the delay and the jitter are significantly reduced. At the access point, we improve the performance of network processing hardware for real-time cryptographic processing by using a specialized processor implemented with field-programmable gate array technology. Furthermore, we use enhanced techniques to implement the Counter (CTR) Mode with Cipher Block Chaining Message Authentication Code Protocol (CCMP) and the CTR protocol. Our experiments show that it requires timing in the range of 20–40 μs to perform data encryption and authentication on different end-host CPUs (e.g., Intel Core i5, i7, and AMD 6-Core) as compared with 10–50 ms when performed using the wireless card. Furthermore, when compared with the standard WiFi protected access II (WPA2), results show that our proposed security system improved the speed to up to 3.7 times.

Modeling short-range ballistic missile defense and Israel's Iron Dome system

This paper develops a model of short-range ballistic missile defense and uses it to study the performance of Israel’s Iron Dome system. The deterministic base model allows for inaccurate missiles, unsuccessful interceptions, and civil defense. Model enhancements consider the trade-offs in attacking the interception system, the difficulties faced by militants in assembling large salvos, and the effects of imperfect missile classification by the defender. A stochastic model is also developed. Analysis shows that system performance can be highly sensitive to the missile salvo size, and that systems with higher interception rates are more “fragile” when overloaded. The model is calibrated using publically available data about Iron Dome’s use during Operation Pillar of Defense in November 2012. If the systems performed as claimed, they saved Israel an estimated 1778 casualties and $80 million in property damage, and thereby made preemptive strikes on Gaza about 8 times less valuable to Israel. Gaza militants could have inflicted far more damage by grouping their rockets into large salvos, but this may have been difficult given Israel’s suppression efforts. Counter-battery fire by the militants is unlikely to be worthwhile unless they can obtain much more accurate missiles.

Influence du financement sur la performance des systèmes de soins

La thèse a pour objectif d’étudier l’influence du financement des soins de santé sur la performance des systèmes de soins compte tenu des caractéristiques organisationnelles sanitaires des systèmes. Elle s’articule autour des trois objectifs suivants : 1) caractériser le financement des soins de santé à travers les différents modèles émergeant des pays à revenu élevé ; 2) apprécier la performance des systèmes de soins en établissant les divers profils apparaissant dans ces mêmes pays ; 3) examiner le lien entre le financement et la performance en tenant compte du pouvoir modérateur du contexte organisationnel des soins. Inspirée du processus de circulation de l’argent dans le système de soins, l’approche a d’abord consisté à classer les pays étudiés – par une analyse configurationnelle opérationnalisée par les analyses de correspondance multiples (ACM) et de classification hiérarchique ascendante (CHA) – dans des modèles types, chacun représentant une configuration particulière de processus de financement des soins de santé (article 1). Appliquée aux données recueillies auprès des 27 pays de l’OCDE à revenu élevé via les rapports Health Care in Transition des systèmes de santé des pays produits par le bureau Européen de l’OMS, la banque de données Eco-Santé OCDE 2007 et les statistiques de l’OMS 2008, les analyses ont révélé cinq modèles de financement. Ils se distinguent selon les fonctions de collecte de l’argent dans le système (prélèvement), de mise en commun de l’argent collecté (stockage), de la répartition de l’argent collecté et stocké (allocation) et du processus de paiement des professionnels et des établissements de santé (paiement). Les modèles ainsi développés, qui vont au-delà du processus unique de collecte de l’argent, donnent un portrait plus complet du processus de financement des soins de santé. Ils permettent ainsi une compréhension de la cohérence interne existant entre les fonctions du financement lors d’un éventuel changement de mode de financement dans un pays. Dans un deuxième temps, nous appuyant sur une conception multidimensionnelle de la performance des systèmes, nous avons classé les pays : premièrement, selon leur niveau en termes de ressources mobilisées, de services produits et de résultats de santé atteints (définissant la performance absolue) ; deuxièmement, selon les efforts qu’ils fournissent pour atteindre un niveau élevé de résultats de santé proportionnellement aux ressources mobilisées et aux services produits en termes d’efficience, d’efficacité et de productivité (définissant ainsi la performance relative) ; et troisièmement, selon les profils types de performance globale émergeant en tenant compte simultanément des niveaux de performance absolue et relative (article 2). Les analyses effectuées sur les données collectées auprès des mêmes 27 pays précédents ont dégagé quatre profils de performance qui se différencient selon leur niveau de performance multidimensionnelle et globale. Les résultats ainsi obtenus permettent d’effectuer une comparaison entre les niveaux globaux de performance des systèmes de soins. Pour terminer, afin de répondre à la question de savoir quel mode – ou quels modes – de financement générerait de meilleurs résultats de performance, et ce, dans quel contexte organisationnel de soins, une analyse plus fine des relations entre le financement et la performance (tous définis comme précédemment) compte tenu des caractéristiques organisationnelles sanitaires a été réalisée (article 3). Les résultats montrent qu’il n’existe presque aucune relation directe entre le financement et la performance. Toutefois, lorsque le financement interagit avec le contexte organisationnel sanitaire pour appréhender le niveau de performance des systèmes, des relations pertinentes et révélatrices apparaissent. Ainsi, certains modes de financement semblent plus attrayants que d’autres en termes de performance dans des contextes organisationnels sanitaires différents. Les résultats permettent ainsi à tous les acteurs du système de comprendre qu’il n’existe qu’une influence indirecte du financement de la santé sur la performance des systèmes de soins due à l’interaction du financement avec le contexte organisationnel sanitaire. L’une des originalités de cette thèse tient au fait que très peu de travaux ont tenté d’opérationnaliser de façon multidimensionnelle les concepts de financement et de performance avant d’analyser les associations susceptibles d’exister entre eux. En outre, alors que la pertinence de la prise en compte des caractéristiques du contexte organisationnel dans la mise en place des réformes des systèmes de soins est au coeur des préoccupations, ce travail est l’un des premiers à analyser l’influence de l’interaction entre le financement et le contexte organisationnel sanitaire sur la performance des systèmes de soins.

The Integrated Mass Transit Systems Program in Colombia: an Example of Recentralization of the Cities´ Management?

The Integrated Mass Transit Systems are an initiative of the Colombian Government to replicate the experience of Bogota’s Bus Rapid Transit System —Transmilenio— in large urban areas of the country, most of them over municipal perimeters to provide transportation services to areas undergoing a metropolization process. Management of these large scale metropolitan infrastructure projects involves complex setups that present new challenges in the interaction between stakeholders and interests between municipalities, tiers of government and public and private sectors. This article presents a compilation of the management process of these projects from the national context, based on a document review of the regulatory framework, complemented by interviews with key stakeholders at the national level. Research suggests that the implementation of large-scale metropolitan projects requires a management framework orientated to overcome the traditional tensions between centralism and municipal autonomy.

A camera based digit location and recognition system for garment tracking

Garment information tracking is required for clean room garment management. In this paper, we present a camera-based robust system with implementation of Optical Character Reconition (OCR) techniques to fulfill garment label recognition. In the system, a camera is used for image capturing; an adaptive thresholding algorithm is employed to generate binary images; Connected Component Labelling (CCL) is then adopted for object detection in the binary image as a part of finding the ROI (Region of Interest); Artificial Neural Networks (ANNs) with the BP (Back Propagation) learning algorithm are used for digit recognition; and finally the system is verified by a system database. The system has been tested. The results show that it is capable of coping with variance of lighting, digit twisting, background complexity, and font orientations. The system performance with association to the digit recognition rate has met the design requirement. It has achieved real-time and error-free garment information tracking during the testing.

Empirical impact of cache effects for vision system design

Computer vision applications generally split their problem into multiple simpler tasks. Likewise research often combines algorithms into systems for evaluation purposes. Frameworks for modular vision provide interfaces and mechanisms for algorithm combination and network transparency. However, these don’t provide interfaces efficiently utilising the slow memory in modern PCs. We investigate quantitatively how system performance varies with different patterns of memory usage by the framework for an example vision system.

An Agent Based Education Resource Purvey System

Most current education organizations use books and CDs as the main media, which takes a long time for knowledge updating between education resource providers and the users. The rapid development of the Internet has brought with it the possibility of improving the resource purveying mechanisms. Therefore, we designed an agent based system to purvey education resources from the resource centre to schools through the Internet. Agent technology helps to improve system performance and flexibility. This paper describes the design of our system, details the functions of the main parts of the system, shows the communication methods between agents and finally evaluates the system by experiments.

Interference cancellation in two-path successive relay system with network coding

This paper proposes a novel interference cancellation algorithm for the two-path successive relay system using network coding. The two-path successive relay scheme was proposed recently to achieve full date rate transmission with half-duplex relays. Due to the simultaneous data transmission at the relay and source nodes, the two-path relay suffers from the so-called inter-relay interference (IRI) which may significantly degrade the system performance. In this paper, we propose to use the network coding to remove the IRI such that the interference is first encoded with the network coding at the relay nodes and later removed at the destination. The network coding has low complexity and can well suppress the IRI. Numerical simulations show that the proposed algorithm has better performance than existing approaches.

Developing new components for variable flow distribution system modelling in TRNSYS

This study attempts to fill the existing gap in the simulation of variable flow distribution systems through developing new pressure governing components. These components are able to capture the actual ever-changing system performance curve in variable flow distribution systems together with the prediction of controversial issues such as starving, over-flow and the lack of controllability on the flow rate of different branches in a hydronic system. The performance of the proposed components is verified using a case study under design and off-design circumstances. Full integration of the new components within the TRNSYS simulation package is another advantage of this study, which makes it more applicable for designers in both the design and commissioning of hydronic systems.

Mobile-to-mobile MIMO transmit-receive diversity systems: analysis and performance in three-dimensional double-correlated channels

Mobile-to-mobile (M-to-M) communications are expected to play a crucial role in future wireless systems and networks. In this paper, we consider M-to-M multiple-input multiple-output (MIMO) maximal ratio combining system and assess its performance in spatially correlated channels. The analysis assumes double-correlated Rayleigh-and-Lognormal fading channels and is performed in terms of average symbol error probability, outage probability, and ergodic capacity. To obtain the receive and transmit spatial correlation functions needed for the performance analysis, we used a three-dimensional (3D) M-to-M MIMO channel model, which takes into account the effects of fast fading and shadowing. The expressions for the considered metrics are derived as a function of the average signal-to-noise ratio per receive antenna in closed-form and are further approximated using the recursive adaptive Simpson quadrature method. Numerical results are provided to show the effects of system parameters, such as distance between antenna elements, maximum elevation angle of scatterers, orientation angle of antenna array in the x–y plane, angle between the x–y plane and the antenna array orientation, and degree of scattering in the x–y plane, on the system performance. Copyright © 2011 John Wiley & Sons, Ltd.

Performance analysis of MIMO MRC in 3D mobile-to-mobile double-correlated channels

In this paper, we consider multiple-input multiple- output (MIMO) maximal ratio combining (MRC) systems and assess the system performance in terms of average symbol error probability (SEP), outage probability and ergodic capacity in double-correlated Rayleigh-and-Lognormal fading channels. In order to derive the receive and transmit correlation functions needed for the performance analysis, a three-dimensional (3D) MIMO mobile-to-mobile (M-to-M) channel model, which takes into account the effects of fast fading and shadowing is used. Numerical results are provided to show the effects of system parameters, such as maximum elevation angle of scatterers, orientation angle of antenna array in the x-y plane, angle between x-y plane and the antenna array orientation, and degree of scattering in the x-y plane, on the system performance.

The actual status of the development of a Danish/Swedish system concept of a solar combisystem

At the beginning of 2003 the four year long research project REBUS on education, research, development and demonstration of competitive solar combisystems was launched. Research groups in Norway, Denmark, Sweden and Latvia are working together with partners from industry on innovative solutions for solar heating in the Nordic countries. Existing system concepts have been analyzed and based on the results new system designs have been developed. The proposed solutions have to fulfill country specific technical, sociological and cost requirements. Due to the similar demands on the systems in Denmark and Sweden it has been decided to develop a common system concept for both countries, which increases the market potential for the manufacturer. The focus of the development is on systems for the large number of rather well insulated existing single family houses. In close collaboration with the industrial partners a system concept has been developed that is characterized by its high compactness and flexibility. It allows the use of different types of boilers, heating distribution systems and a variable store and collector size. Two prototypes have been built, one for the Danish market with a gas boiler, and one for the Swedish market with a pellet boiler as auxiliary heater. After intensive testing and eventual further improvements at least two systems will be installed and monitored in demonstration houses. The systems have been modeled in TRNSYS and the simulation results will be used to further improve the system and evaluate the system performance.

Evaluation of a micro PV-Wind hybrid system in Nordic climate conditions

A one year data analysis for a micro PV-Wind hybrid system (0.52 kW + 1 kW), installed in Borlänge/Sweden is presented in this paper. The system performance was evaluated according the guidelines of the IEC 61724 standard. The parameters obtained allow a comparison with similar systems. The measurement data are also used to evaluate the sizing and operation of the hybrid system. In addition, the system was modelled in HOMER to study sizing options.

Six-Day System Test and Component test and System Simulation for Combitanks with Internal heat Exchangers

An international standard, ISO/DP 9459-4 has been proposed to establish a uniform standard of quality for small, factory-made solar heating systerns. In this proposal, system components are tested separatelyand total system performance is calculated using system simulations based on component model parameter values validated using the results from the component tests. Another approach is to test the whole system in operation under representative conditions, where the results can be used as a measure of the general system performance. The advantage of system testing of this form is that it is not dependent on simulations and the possible inaccuracies of the models. Its disadvantage is that it is restricted to the boundary conditions for the test. Component testing and system simulation is flexible, but requires an accurate and reliable simulation model.The heat store is a key component conceming system performance. Thus, this work focuses on the storage system consisting store, electrical auxiliary heater, heat exchangers and tempering valve. Four different storage system configurations with a volume of 750 litre were tested in an indoor system test using a six -day test sequence. A store component test and system simulation was carried out on one of the four configurations, applying the proposed standard for stores, ISO/DP 9459-4A. Three newly developed test sequences for intemalload side heat exchangers, not in the proposed ISO standard, were also carried out. The MULTIPORT store model was used for this work. This paper discusses the results of the indoor system test, the store component test, the validation of the store model parameter values and the system simulations.

Electricity, hot water and cold water production from biomass. Energetic and economical analysis of the compact system of cogeneration run with woodgas from a small downdraft gasifier

Wood gasification technologies to convert the biomass into fuel gas stand out. on the other hand, producing electrical energy from stationary engine is widely spread, and its application in rural communities where the electrical network doesn't exist is very required. The recovery of exhaust gases (engine) is a possibility that makes the system attractive when compared with the same components used to obtain individual heat such as electric power. This paper presents an energetic alternative to adapt a fixed bed gasifier with a compact cogeneration system in order to cover electrical and thermal demands in a rural area and showing an energy solution for small social communities using renewable fuels. Therefore, an energetic and economical analysis from a cogeneration system producing electric energy, hot and cold water, using wooden gas as fuel from a small-sized gasifier was calculated. The energy balance that includes the energy efficiency (electric generation as well as hot and cold water system; performance coefficient and the heat exchanger, among other items), was calculated. Considering the annual interest rates and the amortization periods, the costs of production of electrical energy, hot and cold water were calculated, taking into account the investment, the operation and the maintenance cost of the equipments. Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.