Choosing Thesis Juries: The Costs of Taking a Strict Line on Conflicts of Interest

Étude de cas / Case study

Comparative costs and outcomes of traumatic brain injury from biking accidents with or without helmet use

Contexte: Évaluer les déterminants de maladies évitables et leurs coûts est nécessaire dans le contexte d’assurance maladie universelle. Le moment d’évaluer les impacts des traumatismes crâniocérébraux (TCC) survenus lors d’accidents de vélo est idéal vu la popularité récente du cyclisme au Québec. Objectifs: Comparer les caractéristiques démographiques et médicales, ainsi que les coûts sociétaux qu’engendrent les TCC de cyclistes portant ou non un casque. Méthodologie: Étude rétrospective de 128 cyclistes avec TCC admis à l’Hôpital Général de Montréal entre 2007 et 2011. Les variables indépendantes sont sociodémographiques, cliniques et le port du casque. Les variables dépendantes sont la durée de séjour, l’échelle GOS-E, l’échelle ISS, l’orientation au congé, les décès et les coûts à la société. Résultats: Le groupe portant un casque était plus vieux, plus éduqué, retraité et marié; au niveau médical, ils avaient des TCCs moins sévères à l’imagerie, des hospitalisations aux soins intensifs plus courtes et moins de neurochirurgies. Les coûts médians à la société pour les TCC isolés de cyclistes avec casque étaient significativement moindres. Conclusion: Dans cette étude, le port du casque semblait prévenir certaines complications des TCC et permettait de faire économiser de l’argent à l’état. Le port de casque est recommandé.

The Benefits of Re-Evaluating Real-Time Fulfillment Decisions

At the time of a customer order, the e-tailer assigns the order to one or more of its order fulfillment centers, and/or to drop shippers, so as to minimize procurement and transportation costs, based on the available current information. However this assignment is necessarily myopic as it cannot account for all future events, such as subsequent customer orders or inventory replenishments. We examine the potential benefits from periodically re-evaluating these real-time order-assignment decisions. We construct near-optimal heuristics for the re-assignment for a large set of customer orders with the objective to minimize the total number of shipments. We investigate how best to implement these heuristics for a rolling horizon, and discuss the effect of demand correlation, customer order size, and the number of customer orders on the nature of the heuristics. Finally, we present potential saving opportunities by testing the heuristics on sets of order data from a major e-tailer.

Developing a system for assessing the costs associated with different procurement routes in the construction industry

In developing techniques for monitoring the costs associated with different procurement routes, the central task is disentangling the various project costs incurred by organizations taking part in construction projects. While all firms are familiar with the need to analyse their own costs, it is unusual to apply the same kind of analysis to projects. The purpose of this research is to examine the claims that new ways of working such as strategic alliancing and partnering bring positive business benefits. This requires that costs associated with marketing, estimating, pricing, negotiation of terms, monitoring of performance and enforcement of contract are collected for a cross-section of projects under differing arrangements, and from those in the supply chain from clients to consultants, contractors, sub-contractors and suppliers. Collaboration with industrial partners forms the basis for developing a research instrument, based on time sheets, which will be relevant for all those taking part in the work. The signs are that costs associated with tendering are highly variable, 1-15%, depending upon what precisely is taken into account. The research to date reveals that there are mechanisms for measuring the costs of transactions and these will generate useful data for subsequent analysis.

Bayes estimates of distance-to-market: Transactions costs, cooperatives and milk-market development in the Ethiopian highlands

Rationalizing non-participation as a resource deficiency in the household, this paper identifies strategies for milk-market development in the Ethiopian highlands. The additional amounts of covariates required for Positive marketable surplus -'distances-to market'-are computed from a model in which production and sales are correlated; sales are left-censored at some Unobserved thresholds production efficiencies are heterogeneous: and the data are in the form of a panel. Incorporating these features into the modeling exercise ant because they are fundamental to the data-generating environment. There are four reasons. First, because production and sales decisions are enacted within the same household, both decisions are affected by the same exogenous shocks, and production and sales are therefore likely to be correlated. Second. because selling, involves time and time is arguably the most important resource available to a subsistence household, the minimum Sales amount is not zero but, rather, some unobserved threshold that lies beyond zero. Third. the Potential existence of heterogeneous abilities in management, ones that lie latent from the econometrician's perspective, suggest that production efficiencies should be permitted to vary across households. Fourth, we observe a single set of households during multiple visits in a single production year. The results convey clearly that institutional and production) innovations alone are insufficient to encourage participation. Market-precipitating innovation requires complementary inputs, especially improvements in human capital and reductions in risk. Copyright (c) 20 08 John Wiley & Sons, Ltd.

Developing a system for assessing the costs associated with different procurement routes in the construction industry

In developing techniques for monitoring the costs associated with different procurement routes, the central task is disentangling the various project costs incurred by organizations taking part in construction projects. While all firms are familiar with the need to analyse their own costs, it is unusual to apply the same kind of analysis to projects. The purpose of this research is to examine the claims that new, ways of working such as strategic alliancing and partnering bring positive business benefits. This requires that costs associated with marketing, estimating, pricing, negotiation of terms, monitoring of performance and enforcement of contract are collected for a cross-section of projects under differing arrangements, and from those in the supply, chain from clients to consultants, contractors, subcontractors and suppliers. Collaboration with industrial partners forms the basis for developing a research instrument, bused on time sheets, which will be relevant for all those taking part in the work. The signs are that costs associated with,with tendering are highly variable, 1-15%, depending upon what precisely, is taken into account. The research to date reveals that there are mechanisms for measuring the costs of transactions and these will generate useful data for subsequent analysis.

Reaching for the skies: Time and turbulence in digital technologies and practices

This research examines dynamics associated with new representational technologies in complex organizations through a study of the use of a Single Model Environment, prototyping and simulation tools in the mega-project to construct Terminal 5 at Heathrow Airport, London. The ambition of the client, BAA. was to change industrial practices reducing project costs and time to delivery through new contractual arrangements and new digitally-enabled collaborative ways of working. The research highlights changes over time and addresses two areas of 'turbulence' in the use of: 1) technologies, where there is a dynamic tension between desires to constantly improve, change and update digital technologies and the need to standardise practices, maintaining and defending the overall integrity of the system; and 2) representations, where dynamics result from the responsibilities and liabilities associated with sharing of digital representations and a lack of trust in the validity of data from other firms. These dynamics are tracked across three stages of this well-managed and innovative project and indicate the generic need to treat digital infrastructure as an ongoing strategic issue.

EOQ, JIT and fixed costs in the Ready-mixed concrete industry

The successful implementation of just-in-time (JIT) purchasing policy in many industries has prompted many companies that still use the economic order quantity (EOQ) purchasing policy to ponder if they should switch to the JIT purchasing policy. Despite existing studies that directly compare the costs between the EOQ and JIT purchasing systems, this decision is, however, still difficult to be made, especially when price discount has to be considered. JIT purchasing may not always be successful even though plants that adopted JIT operations have experienced or can take advantage of physical space reduction. Hence, the objective of this study is to expand on a classical EOQ with a price discount model to derive the EOQ–JIT cost indifference point. The objective was tested and achieved through a survey and case study conducted in the ready-mixed concrete industry in Singapore.

A model for comparative analysis of inventory costs of JIT and EOQ purchasing in the ready mixed concrete industry

A model for comparing the inventory costs of purchasing under the economic order quantity (EOQ) system and the just-in-time (JIT) order purchasing system in existing literature concluded that JIT purchasing was virtually always the preferable inventory ordering system especially at high level of annual demand. By expanding the classical EOQ model, this paper shows that it is possible for the EOQ system to be more cost effective than the JIT system once the inventory demand approaches the EOQ-JIT cost indifference point. The case study conducted in the ready-mixed concrete industry in Singapore supported this proposition.

Lag-1 sparing in the attentional blink: benefits and costs of integrating two events into a single episode

When people monitor a visual stream of rapidly presented stimuli for two targets (T1 and T2), they often miss T2 if it falls into a time window of about half a second after T1 onset-the attentional blink. However, if T2 immediately follows T1, performance is often reported being as good as that at long lags-the so-called Lag-1 sparing effect. Two experiments investigated the mechanisms underlying this effect. Experiment 1 showed that, at Lag 1, requiring subjects to correctly report both identity and temporal order of targets produces relatively good performance on T2 but relatively bad performance on T1. Experiment 2 confirmed that subjects often confuse target order at short lags, especially if the two targets are equally easy to discriminate. Results suggest that, if two targets appear in close succession, they compete for attentional resources. If the two competitors are of unequal strength the stronger one is more likely to win and be reported at the expense of the other. If the two are equally strong, however, they will often be integrated into the same attentional episode and thus get both access to attentional resources. But this comes with a cost, as it eliminates information about the targets' temporal order.

The effect of term-time employment on UK higher education students

In the UK, participation in higher education has risen over the past two decades, along with a shift of the costs of higher education onto the individual and a move to widening participation among previously underrepresented groups. This has led to changes in the way individuals fund their higher education, in particular a rise in the incidence of term time employment. Term time employment potentially plays a much bigger role than in the past, both as a means for individuals to fund their education and reduce debt, and as a way to gain valuable work experience and increase employability. With the increase in the number of graduates in the UK labour market it is now more important for individuals to be able to differentiate themselves in the labour market.

Europe’s biocidal products directive: benefits and costs in urban pest management

The European Commission’s Biocidal Products Directive (Council Directive 98/8 EC), known as the BPD, is the largest regulatory exercise ever to affect the urban pest control industry. Although focussed in the European Union its impact is global because any company selling pest control products in the EU must follow its principles. All active substances, belonging to 23 different biocidal product types, come within the Directive’s scope of regulatory control. This will eventually involve re-registration of all existing products, as well as affecting any new product that comes to the market. Some active substances, such as the rodenticides and insecticides, are already highly regulated in Europe but others, such as embalming fluids, masonry preservatives, disinfectants and repellents/attractants will come under intensive regulatory scrutiny for the first time. One of the purposes of the Directive is to offer enhanced protection for human health and the environment. The potential benefit for suppliers of pest control products is mutual recognition of regulatory product dossiers across 25 Member States of the European Union. This process, requiring harmonisation of all regulatory decision-making processes, should reduce duplicated effort and, potentially, allow manufacturers speedier access to European markets. However, the cost to industry is enormous, both in terms of the regulatory resources required to assemble BPD dossiers and the development budgets required to conduct studies to meet its new standards. The cost to regulatory authorities is also tremendous, in terms of the need to upgrade staff capabilities to meet new challenges and the volume of the work expected by the Commission when they are appointed the Rapporteur Member State (RMS) for an active substance. Users of pest control products will pay a price too. The increased regulatory costs of maintaining products in the European market are likely to be passed on, at least in part, to users. Furthermore, where the costs of meeting new regulatory requirements cannot be recouped from product sales, many well-known products may leave the market. For example, it seems that in future few rodenticides that are not anticoagulants will be available within the EU. An understanding of the BPD is essential to those who intend to place urban pest control products on the European market and may be useful to those considering the harmonisation of regulatory processes elsewhere. This paper reviews the operation of the first stages of the BPD for rodenticides, examines the potential benefits and costs of the legislation to the urban pest control industry and looks forward to the next stages of implementation involving all insecticides used in urban pest management.

Bayesian estimation of the double hurdle model in the presence of fixed costs

We present a model of market participation in which the presence of non-negligible fixed costs leads to random censoring of the traditional double-hurdle model. Fixed costs arise when household resources must be devoted a priori to the decision to participate in the market. These costs, usually of time, are manifested in non-negligible minimum-efficient supplies and supply correspondence that requires modification of the traditional Tobit regression. The costs also complicate econometric estimation of household behavior. These complications are overcome by application of the Gibbs sampler. The algorithm thus derived provides robust estimates of the fixed-costs, double-hurdle model. The model and procedures are demonstrated in an application to milk market participation in the Ethiopian highlands.

Time valued life cycle greenhouse gas emissions from buildings

The UK has adopted legally binding carbon reduction targets of 34% by 2020 and 80% by 2050 (measured against the 1990 baseline). Buildings are estimated to be responsible for more than 50% of greenhouse gas (GHG) emissions in the UK. These consist of both operational, produced during use, and embodied, produced during manufacture of materials and components, and during construction, refurbishments and demolition. A brief assessment suggests that it is unlikely that UK emission reduction targets can be met without substantial reductions in both Oc and Ec. Oc occurs over the lifetime of a building whereas the bulk of Ec occurs at the start of a building’s life. A time value for emissions could influence the decision making process when it comes to comparing mitigation measures which have benefits that occur at different times. An example might be the choice between building construction using low Ec construction materials versus building construction using high Ec construction materials but with lower Oc, although the use of high Ec materials does not necessarily imply a lower Oc. Particular time related issues examined here are: the urgency of the need to achieve large emissions reductions during the next 10 to 20 years; the earlier effective action is taken, the less costly it will be; future reduction in carbon intensity of energy supply; the carbon cycle and relationship between the release of GHG’s and their subsequent concentrations in the atmosphere. An equation is proposed, which weights emissions according to when they occur during the building life cycle, and which effectively increases Ec as a proportion of the total, suggesting that reducing Ec is likely to be more beneficial, in terms of climate change, for most new buildings. Thus, giving higher priority to Ec reductions is likely to result in a bigger positive impact on climate change and mitigation costs.

A review of time use models of residential electricity demand

Residential electricity demand in most European countries accounts for a major proportion of overall electricity consumption. The timing of residential electricity demand has significant impacts on carbon emissions and system costs. This paper reviews the data and methods used in time use studies in the context of residential electricity demand modelling. It highlights key issues which are likely to become more topical for research on the timing of electricity demand following the roll-out of smart metres.