The Influence of Table Top Technology in Full-service Restaurants

The use of tabletop technology continues to grow in the restaurant industry, and this study identifies the strengths and weakness of the technology, how it influences customers, and how it can improve the bottom line for managers and business owners. Results from two studies involving a full-service casual dining chain show that dining time was significantly reduced among patrons who used the tabletop hardware to order or pay for their meals, as was the time required for servers to meet the needs of customers. Also, those who used the devices to order a meal tended to spend more than those who did not. Patrons across the industry have embraced guest-facing technology, such as online reservation systems, mobile apps, payment apps, and tablet-based systems, and may in fact look for such technology when deciding where to dine. Guests’ reactions have been overwhelmingly positive, with 70 to 80 percent of consumers citing the benefits of guest-facing technology and applications. The introduction of tabletop technology in the full-service segment has been slower than in quick-service restaurants (QSRs), and guests cite online reservation systems, online ordering, and tableside payment as preferred technologies. Restaurant operators have also cited benefits of guest-facing technology, for example, the use of electronic ordering, which led to increased sales as such systems can induce the purchase of more expensive menu items and side dishes while allowing managers to store order and payment information for future transactions. Researchers have also noted the cost of the technology and potential problems with integration into other systems as two main factors blocking adoption.

The introduction of e-learning in European universities: models and strategies

The aim of this paper is to present the models and the strategies of adoption of e-learning in a group of European universities, most of them located in the regions called “the four motors of Europe” (Baden-Württenberg, Catalunya, Lombardy and Rhône-Alpes) and in Switzerland. Our analysis focuses on four dimensions: the rationale behind the introduction of e-learning, the organisation of the activities and, in particular, the existence of a university centre for e-learning, the type of activities, and, finally, the type of public reached by e-learning. The majority of campus universities in our sample introduced e-learning to improve the quality of education of their students and, for the most part, as a support for existing courses. Some of the campus universities went even further insofar as they have introduced some online courses into their curricula. This has led to forms of cooperation where different universities share some of their courses. Finally, a small number of campus universities have included as part of their educational offer full distance degree programs which can be attended also by non residential students. The above cases show that there is no general move from campus universities towards distance education, but rather a more selective behaviour. Thus we conclude that e-learning, although it is undoubtedly spreading in both distance and presence universities, is not yet bringing fundamental changes in the institutions themselves. E-learning is at the moment integrated into the existing organization and educational offer. (DIPF/Orig.)

Introduction to Multi-Agent Simulation

When designing systems that are complex, dynamic and stochastic in nature, simulation is generally recognised as one of the best design support technologies, and a valuable aid in the strategic and tactical decision making process. A simulation model consists of a set of rules that define how a system changes over time, given its current state. Unlike analytical models, a simulation model is not solved but is run and the changes of system states can be observed at any point in time. This provides an insight into system dynamics rather than just predicting the output of a system based on specific inputs. Simulation is not a decision making tool but a decision support tool, allowing better informed decisions to be made. Due to the complexity of the real world, a simulation model can only be an approximation of the target system. The essence of the art of simulation modelling is abstraction and simplification. Only those characteristics that are important for the study and analysis of the target system should be included in the simulation model. The purpose of simulation is either to better understand the operation of a target system, or to make predictions about a target system’s performance. It can be viewed as an artificial white-room which allows one to gain insight but also to test new theories and practices without disrupting the daily routine of the focal organisation. What you can expect to gain from a simulation study is very well summarised by FIRMA (2000). His idea is that if the theory that has been framed about the target system holds, and if this theory has been adequately translated into a computer model this would allow you to answer some of the following questions: · Which kind of behaviour can be expected under arbitrarily given parameter combinations and initial conditions? · Which kind of behaviour will a given target system display in the future? · Which state will the target system reach in the future? The required accuracy of the simulation model very much depends on the type of question one is trying to answer. In order to be able to respond to the first question the simulation model needs to be an explanatory model. This requires less data accuracy. In comparison, the simulation model required to answer the latter two questions has to be predictive in nature and therefore needs highly accurate input data to achieve credible outputs. These predictions involve showing trends, rather than giving precise and absolute predictions of the target system performance. The numerical results of a simulation experiment on their own are most often not very useful and need to be rigorously analysed with statistical methods. These results then need to be considered in the context of the real system and interpreted in a qualitative way to make meaningful recommendations or compile best practice guidelines. One needs a good working knowledge about the behaviour of the real system to be able to fully exploit the understanding gained from simulation experiments. The goal of this chapter is to brace the newcomer to the topic of what we think is a valuable asset to the toolset of analysts and decision makers. We will give you a summary of information we have gathered from the literature and of the experiences that we have made first hand during the last five years, whilst obtaining a better understanding of this exciting technology. We hope that this will help you to avoid some pitfalls that we have unwittingly encountered. Section 2 is an introduction to the different types of simulation used in Operational Research and Management Science with a clear focus on agent-based simulation. In Section 3 we outline the theoretical background of multi-agent systems and their elements to prepare you for Section 4 where we discuss how to develop a multi-agent simulation model. Section 5 outlines a simple example of a multi-agent system. Section 6 provides a collection of resources for further studies and finally in Section 7 we will conclude the chapter with a short summary.

First evidence of Schmallenberg virus introduction in Portugal, 2014

Objectives: Serra da Estrela native (SEN) breed of sheep is one of the most important in Portugal, standing responsible for the production of one of the most internationally recognized cheeses in the world, "Queijo Serra da Estrela” (protected designation of origin). One of the major risks to the sustainability of SEN dairy flocks if footrot, an infectious diseases that causes lameness, decrease in milk production, weight loss and decrease in fertility. The aim of this work was to determine which parameters become decisive for the appearance of footrot in SEN dairy flocks, while establishing associations with environmental and nutritional variables. Materials and Methods: The present study was carried out by performing an especially designed 27 multiple choice questionnaire, based on the underlying causes of lameness in livestock and in the clinical diagnosis performed by the vet techinichian of the clinical cases evaluated at the moment of the inquiry. The survey was performed during the execution of the oficial veterinary health program between February and September of 2014 by a veterinarian team from the Association of SEN Sheep Breeders (ANCOSE). The ovine producers (N=30, with a total of 1270 animals) were randomly selected from the extense area of production of “Queijo Serra da Estrela”. The parameters evaluated in the study were: season and consequent weather changes during the period of the study, floor types, hygiene conditions, bed types, the existence and use of footbaths, location of footbaths, foot trimming and foot hygiene procedures. After the construction of the database and using the Statistical Package for Social Sciences version 16.0 the frequency response for each item was calculated. Results: All SEN livestock producers are proactive in the treatment of lameness (70%). About 99.7% of lameness was related with footroot and most appeared in winter (36.7%). In some occasions there was not a specific season distribution (56.7% rainiest years). From the analyzed farms, 70% use straw as a floor bed, followed by bush (21%). 45.6% of animals were clinically diagnosed with footrot and were sheltered in straw floor. Bed quality is good in 40%, however frequent changes in the floor bed in the preceding 15 days had a higher rate of footroot diagnosed cases (33,23%) compared to monthly changes. Regarding sheepfold animal number, the distribution is proper in 36.7%, elevated in 30%, overcrowded in 6.7% and low in 23.3%. Clinically ill diagnosed animals in last category were the lowest observed (3%). Concerning hoof trimming, 76.7% trims while 23.3% reported not to perform that task. From those that perform trimming, 73.9% do it only when necessary, 21.7% at the time of clipping and 4.4% when the animal is affected. One curious result was that animals who perform trimming at clipping had higher footrot cases (52.6%), unlike those who trim only when necessary (40.2%) or even when animals are clinically ill (0.91%). Mostly all in the presence of footrot choose a local treatment (95.2%) using antibiotic sprays, instead of parenteral antibiotic treatment. Footbath is rarely used in the prevention (13.3%) of this disease and when it is misconceived (25%) and incorrectly formulated (100%). Conclusions: This study was the first performed in Portugal focusing footrot caracterization in native SEN flocks.Economic impact in SEN dairy flocks is atributed to factors such as direct decrease in milk and meat production,early slaughter of affected animals due to non responsive treatment and medical expenses.The most effective eradication method combines first of all the ability to understand the problems of SEN producers and implementation of preventive measures and treatment of footrot.Often linked to lack of formation, the advance age of portuguese producers the mentality and social factors block the advance of veterinarian intervention itself.

Engineering & Technology Careers Fair 2017 Brochure

Introduction to all the companies attending the Engineering and Technology Careers Fair on 14 February 2017

RNA interference technology as a potential control method for fruit and horticultural crops pathogens Botrytis cinerea and Plasmopara viticola

Chapter 1, a general introduction on Botrytis cinerea and its threat to crop production is presented. What Botrytis looks like, its life cycle, why it is a threat to agricultural production, its worldwide pest status, and its current state of management is further elaborated on. Chapter 2, a general introduction on Plasmopara viticola, its threat to grape production and management strategies presented. Chapter 3, titled " RNA Interference Strategies for Future Management of Plant Pathogenic Fungi: Prospects and Challenges ", presents the rapid improvement and extensive implementation of RNA interference (RNAi) technology for the management of fungal pathogens. In this chapter, we describe the application of exogenous RNAi involved in plant pathogenic fungi and discuss dsRNA production, formulation, and RNAi delivery methods. Chapter 4, titled " Exogenous dsRNAs against chitin synthase and glucan synthase genes suppress the growth of the pathogenic fungus Botrytis cinerea " addresses two important questions: Is RNAi technology functional for B. cinerea control ? And which target genes can be exploited for RNAi-based B.cinerea disease control ? Upon target genes selections, an exogenous RNAi protocol was set up and we could effectively deliver a known dose of bacterially produced double stranded RNA (dsRNA) to induce RNAi in B. cinerea. Chapter 5, titled " Double-Stranded RNA Targeting Dicer-Like Genes Compromises the Pathogenicity of Plasmopara viticola on Grapevine “, which deals mainly on RNAi induction against Plasmopara viticola. This chapter addresses two main questions: Is RNAi technology functional in contrasting Plasmopara viticola? And which target genes can be exploited for RNAi-based disease control in Plasmopara viticola?. In the last Chapter (Chapter 6) titled “General discussions and perspectives for future research”, the major research findings from this thesis are discussed together with perspectives for future research.

Infertility Care And The Introduction Of New Reproductive Technologies In Poor Resource Settings.

The overall prevalence of infertility was estimated to be 3.5-16.7% in developing countries and 6.9-9.3% in developed countries. Furthermore, according to reports from some regions of sub-Saharan Africa, the prevalence rate is 30-40%. The consequences of infertility and how it affects the lives of women in poor-resource settings, particularly in developing countries, has become an important issue to be discussed in reproductive health. In some societies, the inability to fulfill the desire to have children makes life difficult for the infertile couple. In many regions, infertility is considered a tragedy that affects not only the infertile couple or woman, but the entire family. This is a position paper which encompasses a review of the needs of low-income infertile couples, mainly those living in developing countries, regarding access to infertility care, including ART and initiatives to provide ART at low or affordable cost. Information was gathered from the databases MEDLINE, CENTRAL, POPLINE, EMBASE, LILACS, and ICTRP with the key words: infertility, low income, assisted reproductive technologies, affordable cost, low cost. There are few initiatives geared toward implementing ART procedures at low cost or at least at affordable cost in low-income populations. Nevertheless, from recent studies, possibilities have emerged for new low-cost initiatives that can help millions of couples to achieve the desire of having a biological child. It is necessary for healthcare professionals and policymakers to take into account these new initiatives in order to implement ART in resource-constrained settings.

Pragmatics: an introduction

337

Óculos de baixo custo: experiência em Divinolândia (SP)

INTRODUCTION: In Divinolândia (SP), the Consortium of Development of São João da Boa Vista Region Policy (CONDERG), in partnership with State University of Campinas (UNICAMP), has founded an eyeglass store to produce low cost glasses to distribute freely to their customers. The purpose is to analyze the evolution and working process of CONDERG eyeglass store in the last 13 years, since its foundation. METHODS: Data were collected from CONDERG store files from 1988 to 2001. Data regarding the amount of spectacles produced per year, ability to increase the production and store feasibility were analyzed. RESULTS: In 13 years, 16,500 spectacles were supplied. Currently, 400 spectacles are delivered per month, being 200 supported by SUS and the other 200 by CONDERG's own resources. CONCLUSION: The 13-year operation of CONDERG eyeglass store, the free provision of 16,500 spectacles and the increase productive ability have shown this model feasibility.

Padronização de um método para mensuração das tábuas ósseas vestibular e lingual dos maxilares na Tomografia Computadorizada de Feixe Cônico (Cone Beam)

INTRODUÇÃO: a espessura das tábuas ósseas que recobrem os dentes por vestibular e lingual constitui um dos fatores limitantes da movimentação dentária. O avanço tecnológico em Imaginologia permitiu avaliar detalhadamente essas regiões anatômicas por meio da utilização da tomografia computadorizada de feixe cônico (TCFC). OBJETIVO: descrever e padronizar, pormenorizadamente, um método para mensuração das tábuas ósseas vestibular e lingual dos maxilares nas imagens de tomografia computadorizada de feixe cônico. METODOLOGIA: a padronização digital da posição da imagem da face deve constituir o primeiro passo antes da seleção dos cortes de TCFC. Dois cortes axiais de cada maxilar foram empregados para a mensuração da espessura do osso alveolar vestibular e lingual. Utilizou-se como referência a junção cemento-esmalte dos primeiros molares permanentes, tanto na arcada superior quanto na inferior. RESULTADOS: cortes axiais paralelos ao plano palatino foram indicados para avaliação quantitativa do osso alveolar na maxila. Na arcada inferior, os cortes axiais devem ser paralelos ao plano oclusal funcional. CONCLUSÃO: o método descrito apresenta reprodutibilidade para utilização em pesquisas, assim como para a avaliação clínica das repercussões periodontais da movimentação dentária, ao permitir a comparação de imagens pré e pós-tratamento.

Measurement of ethylene production during banana ripening

Introduction. This protocol aims at measuring fruit ethylene production during ripening. It can be used to compare ethylene production between different banana varieties or to compare ethylene production between fruit produced in different pedo-climatic conditions. The principle, key advantages, starting plant material, time required and expected results are presented. Materials and methods. This part describes the required laboratory materials and the three steps necessary for calculating the amount of ethylene produced during banana postharvest ripening. Possible troubleshooting is considered.

Extraction and purification of total RNA from banana tissues (small scale)

Introduction. This protocol aims at preparing total RNA for gene expression analysis by Northern blots, RT-PCR and real-time quantitative PCR; cDNA isolation by RTPCR; and cDNA library construction. The principle, key advantages, starting plant material, time required for obtaining total RNA and expected results are presented. Materials and methods. This part describes the required materials and the 27 steps necessary for preparing RNA from peel and pulp fruit tissue: preparation of plant tissue powder, preparation of the complete RNA extraction buffer and isolation of RNA from ground banana fruit tissue. Results. Extraction of total RNA by the method described makes it possible to achieve electrophoresis under denatured conditions and in vitro reverse transcription. An example for Northern blot analysis is illustrated.

Determination of banana fruit susceptibility to post-harvest diseases: wound anthracnose, quiescent anthracnose and crown rot

Introduction. This protocol aims at ( a) evaluating the resistance to post-harvest diseases within different genotypes of bananas, and ( b) comparing different origins of bananas ( geographic origin, physiological stage, etc.) for their susceptibility to post-harvest diseases. The principle, key advantages, starting plant material, time required and expected results are presented. Materials and methods. Materials required and details of the twelve steps of the protocol ( fruit sampling and inoculum preparation, wound anthracnose resistance study, quiescent anthracnose resistance study and crown-rot resistance study) are described. Results. Typical symptoms of the different diseases are obtained after artificial inoculation.

Biochemical characterization of pulp of banana fruit: measurement of soluble sugars, organic acids, free ACC and in vitro ACC oxidase

Introduction. We present some protocols aiming at partially characterizing banana fruit quality through measurement of some key biochemical parameters. The principle, key advantages, starting plant material, time required and expected results are presented. Materials and methods. This part describes the required laboratory materials and the steps necessary for achieving four protocols making it possible to measure sugar, organic acids and free ACC contents, and in vitro ACC oxidase activity. Results. Standard results obtained by using the protocols described are presented in the figures.