The management of innovation under ambiguity

De récents développements en théorie de la decision ont largement enrichi notre connaissance de la notion d'incertitude knightienne, usuellement appelée ambiguïté. Néanmoins ces dévelopement tardent à être intégrés au coeur de la théorie économique. Nous suggérons que l'analyse de phénonèmes économiques tel que l'innovation et la Recherche et Développement gagnerait à intégrer les modèles de décision en situation d'ambiguïté. Nous étayons notre propos en analysant l'allocation des droits de propriété d'une découverte. Les deux premières parties de la présentation s'inspire d'un modèle d'Aghion et de Tirole, The Management of Innovation, portant sur l'allocation des droits de propriété entre une unité de recherche et un investisseur. Il est démontré qu'un désaccord entre les agents sur la technologie de recherche affecte leur niveau d'effort, l'allocation des droits de propriété et l'allocation des revenus subséquents. Finalement, nous examinons une situation où plusieurs chercheurs sont en compétition en s'inspirant du traitement de l'incertitude de Savage. La présence d'ambuïgité affecte le comportement des agents et l'allocation des droits de propriétés de manière qui n'est pas captée en assumant l'hypothèse de risque.

Studies on the taxonomy of interstitial Fauna of some prominent beaches of Kerala

The oceans in their expanse cover, seven - tenths of the Earth surface. Despite being restricted in size, the littoral zone or the intertidal zone (beach) has the greatest variation in environment factors of any marine area .Stemming from this variation ,a treamendous diversity of life, which may be great as or greater than that found in the more extensive sub tidal habits exist in this realm. the study beaches harbour diverse and abundant assemblage of marine organisms. Besides macro funna, microscopic organisms belonging to the lower and higher invertebrate taxa profusely inhabit these beaches. The ecological realm where these animals exist is known as the interstitial environment, which in principle includes the pore spaces in between the sand grains containing copious supply of nutrient rich oxygenated seawater. An astonishing diversity of taxa could be found within the interstitial fauna.

Population characteristics and taxonomy of lantern fishes of genus Diaphus (Family Myctophidae) off south west coast of India

Globally most of the conventional fish stocks have reached a state of optimum exploitation or even over-exploitation; efficient utilization of non-conventional resources is necessary to meet the supply-demand gap for protein supply. Mesopelagic fishes can be considered as one such promising resource for the future, if appropriate harvest and post-harvest technologies are developed. Increasing human population and increasing demand for cheaper food fishes has made myctophids a possible potential resource for future exploitation and utilization. Earlier studies indicated the abundance of Diaphus spp. in the eastern and northeastern Arabian Sea. The present study also indicates the dominance of Diaphus spp. in the deep sea trawling grounds of south west coast of India. Commercial viability of the myctophid fishing in the Indian waters has to be worked out. The present catch estimation is based on the Stratified Random Sampling Method from the landing data. As the coverage of sampling area was limited and the gear efficiency was not standardized, the data generated are not precise. A counter check for the estimates is also not possible due to the absence of comparable works in the study area. Fish biomass estimation by acoustics survey coupled with direct fishing would only confirm the accuracy of estimates. Exploratory surveys for new fishing areas to be continued, for gathering the distribution, abundance, biological and ecological data and map the potential fishing ground on a GIS platform and the data should be provided to the commercial entrepreneurs. Generally non-conventional and non-targeted resources are under low fishing pressure and exploitation rates. Low values of fishing mortality and exploitation rates indicate that removal from the stock by fishing was only nominal from the present fishing grounds. The results indicate that the stock is almost at virgin state and remains grossly underexploited. Since the extent of distribution and abundance of the stock in the ecosystem remains to be ascertained, sustainable yield could not be estimated. Also the impact of myctophids harvest, on other commercially important fishes, has to be studied.

From evolution to co-evolution – An empirical study of the role of innovation, policy and public research in industrial dynamics

In the past decades since Schumpeter’s influential writings economists have pursued research to examine the role of innovation in certain industries on firm as well as on industry level. Researchers describe innovations as the main trigger of industry dynamics, while policy makers argue that research and education are directly linked to economic growth and welfare. Thus, research and education are an important objective of public policy. Firms and public research are regarded as the main actors which are relevant for the creation of new knowledge. This knowledge is finally brought to the market through innovations. What is more, policy makers support innovations. Both actors, i.e. policy makers and researchers, agree that innovation plays a central role but researchers still neglect the role that public policy plays in the field of industrial dynamics. Therefore, the main objective of this work is to learn more about the interdependencies of innovation, policy and public research in industrial dynamics. The overarching research question of this dissertation asks whether it is possible to analyze patterns of industry evolution – from evolution to co-evolution – based on empirical studies of the role of innovation, policy and public research in industrial dynamics. This work starts with a hypothesis-based investigation of traditional approaches of industrial dynamics. Namely, the testing of a basic assumption of the core models of industrial dynamics and the analysis of the evolutionary patterns – though with an industry which is driven by public policy as example. Subsequently it moves to a more explorative approach, investigating co-evolutionary processes. The underlying questions of the research include the following: Do large firms have an advantage because of their size which is attributable to cost spreading? Do firms that plan to grow have more innovations? What role does public policy play for the evolutionary patterns of an industry? Are the same evolutionary patterns observable as those described in the ILC theories? And is it possible to observe regional co-evolutionary processes of science, innovation and industry evolution? Based on two different empirical contexts – namely the laser and the photovoltaic industry – this dissertation tries to answer these questions and combines an evolutionary approach with a co-evolutionary approach. The first chapter starts with an introduction of the topic and the fields this dissertation is based on. The second chapter provides a new test of the Cohen and Klepper (1996) model of cost spreading, which explains the relationship between innovation, firm size and R&D, at the example of the photovoltaic industry in Germany. First, it is analyzed whether the cost spreading mechanism serves as an explanation for size advantages in this industry. This is related to the assumption that the incentives to invest in R&D increase with the ex-ante output. Furthermore, it is investigated whether firms that plan to grow will have more innovative activities. The results indicate that cost spreading serves as an explanation for size advantages in this industry and, furthermore, growth plans lead to higher amount of innovative activities. What is more, the role public policy plays for industry evolution is not finally analyzed in the field of industrial dynamics. In the case of Germany, the introduction of demand inducing policy instruments stimulated market and industry growth. While this policy immediately accelerated market volume, the effect on industry evolution is more ambiguous. Thus, chapter three analyzes this relationship by considering a model of industry evolution, where demand-inducing policies will be discussed as a possible trigger of development. The findings suggest that these instruments can take the same effect as a technical advance to foster the growth of an industry and its shakeout. The fourth chapter explores the regional co-evolution of firm population size, private-sector patenting and public research in the empirical context of German laser research and manufacturing over more than 40 years from the emergence of the industry to the mid-2000s. The qualitative as well as quantitative evidence is suggestive of a co-evolutionary process of mutual interdependence rather than a unidirectional effect of public research on private-sector activities. Chapter five concludes with a summary, the contribution of this work as well as the implications and an outlook of further possible research.

Integrating socio-economics and ecology: a taxonomy of quantitative methods and a review of their use in agro-ecology

Answering many of the critical questions in conservation, development and environmental management requires integrating the social and natural sciences. However, understanding the array of available quantitative methods and their associated terminology presents a major barrier to successful collaboration. We provide an overview of quantitative socio-economic methods that distils their complexity into a simple taxonomy. We outline how each has been used in conjunction with ecological models to address questions relating to the management of socio-ecological systems. We review the application of social and ecological quantitative concepts to agro-ecology and classify the approaches used to integrate the two disciplines. Our review included all published integrated models from 2003 to 2008 in 27 journals that publish agricultural modelling research. Although our focus is on agro-ecology, many of the results are broadly applicable to other fields involving an interaction between human activities and ecology. We found 36 papers that integrated social and ecological concepts in a quantitative model. Four different approaches to integration were used, depending on the scale at which human welfare was quantified. Most models viewed humans as pure profit maximizers, both when calculating welfare and predicting behaviour. Synthesis and applications. We reached two main conclusions based on our taxonomy and review. The first is that quantitative methods that extend predictions of behaviour and measurements of welfare beyond a simple market value basis are underutilized by integrated models. The second is that the accuracy of prediction for integrated models remains largely unquantified. Addressing both problems requires researchers to reach a common understanding of modelling goals and data requirements during the early stages of a project.

Perspectives on experiences of innovation: the development of an assessment methodology appropriate to construction project organizations

The UK construction industry is in the process of trying to adopt a new culture based on the large-scale take up of innovative practices. Through the Demonstration Project process many organizations are implementing changed practices and learning from the experiences of others. This is probably the largest experiment in innovation in any industry in recent times. The long-term success will be measured by the effectiveness of embedding the new practices in the organization. As yet there is no recognized approach to measuring the receptivity of the organization to the innovation process as an indication of the likelihood of long-term development. The development of an appropriate approach is described here. Existing approaches to the measurement of the take up of innovation were reviewed and where appropriate used as the base for the development of a questionnaire. The questionnaire could be applicable to multi-organizational construction project situations such that the output could determine an individual organization's innovative practices via an innovation scorecard, a project team's approach or it could be used to survey a wide cross-section of the industry.

Tales of the expected: investigating the rhetorical strategies of innovation champions

Innovation continues to be high on the agenda in construction. It is widely considered to be an essential prerequisite of improved performance both for the sector at large and for individual firms. Success stories dominate the parts of the academic literature that rely heavily on the recollections of key individuals. A complementary interpretation focuses on the way innovation champions in hindsight interpret, justify and legitimize the diffusion of innovations. Emphasis is put on the temporal dimension of interpretation and how this links to rhetorical strategies and impression management tactics. Rhetorical theories are drawn upon to analyse the accounts given by innovation champions in seven facilities management organizations. In particular, the three persuasive appeals in classic rhetoric are used to highlight the rhetorical justifications mobilized in the descriptions of what took place. The findings demonstrate the usefulness of rhetorical theories in complementing studies of innovation.

Learning across business sectors: facets of innovation in aerospace and construction

Innovation is notoriously difficult to define and is invariably intertwined with issues of knowledge creation, continuous improvement and organisational change. An extensive literature classifies numerous types of innovation and militates against any simplistic attempt at definition. It is widely accepted that innovation is at least partly dependent upon the surrounding environment. Industry recipes and institutionally embedded practices shape the environment within which innovation occurs. Recent research directions have addressed the diffusion of innovation and its dependence upon social and institutional structures. In this respect, it is highly pertinent to compare the way that innovation is interpreted and enacted in different industrial sectors. The comparison between UK aerospace and construction is especially revealing because the two sectors are so different and therefore constitute radically different climates for innovation. Empirical research is reported based on semi-structured interviews with practitioners from both sectors. Interpretations of innovation are found to differ dramatically between aerospace and construction. Within the context of an ongoing struggle to define innovation, both industries are striving to become more innovative. The aerospace sector is found to emphasise technical innovation whereas the construction sector emphasises process innovation. An overriding cultural bias in Western economies towards technological innovation results in the common perception that aerospace is much more innovative than construction. The experienced realities of practitioners in the two sectors are much more complex.