A research framework for assessing the effects of heat stress on construction workers

Hong Kong in summer (June - October) is hot and humid. Construction workers have to undertake physically demanding activities and often in confined spaces. They are vulnerable to heat stress in summer hence health and safety measures associated to heat stress measured by scientific and clinical parameters are urgently needed. This paper provides an initial report of a research project funded by the Research Grants Council (RGC) of the HKSAR. The aim of this study is to develop a set of indices measured by clinical and scientific methods to detect impending attacks of heat stress. These indices would be of tremendous value in better safeguarding workers’ health and safety by reducing the occurrences of heat stress on site. This paper firstly reports on the statistics of construction incidents arising from heat stress. Qualitative and quantitative research methods applied in conducting the research are discussed. It is believed that the construction industry and the government would benefit a lot as a result of this study.

A study of ionic liquids for dissolution of sugarcane bagasse

Over the last decade, Ionic Liquids (ILs) have been used for the dissolution and derivatization of isolated cellulose. This ability of ILs is now sought for their application in the selective dissolution of cellulose from lignocellulosic biomass, for the manufacture of cellulosic ethanol. However, there are significant knowledge gaps in the understanding of the chemistry of the interaction of biomass and ILs. While imidazolium ILs have been used successfully to dissolve both isolated crystalline cellulose and components of lignocellulosic biomass, phosphonium ILs have not been sufficiently explored for the use in dissolution of lignocellulosic biomass. This thesis reports on the study of the chemistry of sugarcane bagasse with phosphonium ILs. Qualitative and quantitative measurements of biomass components dissolved in the phosphonium ionic liquids (ILs), trihexyltetradecylphosphonium chloride ([P66614]Cl) and tributylmethylphosphonium methylsulphate ([P4441]MeSO4) are obtained using attenuated total reflectance-Fourier Transform Infra Red (FTIR). Absorption bands related to cellulose, hemicelluloses and lignin dissolution monitored in situ in biomass-IL mixtures indicate lignin dissolution in both ILs and some holocellulose dissolution in the hydrophilic [P4441]MeSO4. The kinetics of lignin dissolution reported here indicate that while dissolution in the hydrophobic IL [P66614]Cl appears to follow an accepted mechanism of acid catalysed β-aryl ether cleavage, dissolution in the hydrophilic IL [P4441]MeSO4 does not appear to follow this mechanism and may not be followed by condensation reactions (initiated by reactive ketones). The quantitative measurement of lignin dissolution in phosphonium ILs based on absorbance at 1510 cm-1 has demonstrated utility and greater precision than the conventional Klason lignin method. The cleavage of lignin β-aryl ether bonds in sugarcane bagasse by the ionic liquid [P66614]Cl, in the presence of catalytic amounts of mineral acid. (ca. 0.4 %). The delignification process of bagasse is studied over a range of temperatures (120 °C to 150 °C) by monitoring the production of β-ketones (indicative of cleavage of β-aryl ethers) using FTIR spectroscopy and by compositional analysis of the undissolved fractions. Maximum delignification is obtained at 150 °C, with 52 % of lignin removed from the original lignin content of bagasse. No delignification is observed in the absence of acid which suggests that the reaction is acid catalysed with the IL solubilising the lignin fragments. The rate of delignification was significantly higher at 150 °C, suggesting that crossing the glass transition temperature of lignin effects greater freedom of rotation about the propanoid carbon-carbon bonds and leads to increased cleavage of β-aryl ethers. An attempt has been made to propose a probable mechanism of delignifcation of bagasse with the phosphonuim IL. All polymeric components of bagasse, a lignocellulosic biomass, dissolve in the hydrophilic ionic liquid (IL) tributylmethylphosphonium methylsulfate ([P4441]MeSO4) with and without a catalytic amount of acid (H2SO4, ca. 0.4 %). The presence of acid significantly increases the extent of dissolution of bagasse in [P4441]MeSO4 (by ca. 2.5 times under conditions used here). The dissolved fractions can be partially recovered by the addition of an antisolvent (water) and are significantly enriched in lignin. Unlike acid catalysed dissolution in the hydrophobic IL tetradecyltrihexylphosphonium chloride there is little evidence of cleavage of β-aryl ether bonds of lignin dissolving in [P4441]MeSO4 (with and without acid), but this mechanism may play some role in the acid catalysed dissolution. The XRD of the undissolved fractions suggests that the IL may selectively dissolve the amorphous cellulose component, leaving behind crystalline material.

Validation of a food behavior questionnaire for male blue collar workers

During nutrition intervention programs, some form of dietary assessment is usually necessary. This dietary assessment can be for: initial screening; development of appropriate programs and activities; or, evaluation. Established methods of dietary assessment are not always practical, nor cost effective in such interventions, therefore an abbreviated dietary assessment tool is needed. The Queensland Nutrition Project developed such a tool for male Blue Collar Workers, the Food Behaviour Questionnaire, consisting of 27 food behaviour related questions. This tool has been validated in a sample of 23 men, through full dietary assessment obtained via food frequency questionnaires and 24 hour dietary recalls. Those questions which correlated poorly with the full dietary assessment were deleted from the tool. In all, 13 questions was all that was required to distinguish between high and low dietary intakes of particular nutrients. Three questions when combined had correlations with refined sugar between 0.617 and 0.730 (p<0.005); four questions when combined had correlations with dietary fibre as percentage of energy of 0.45 (p<0.05); five questions when combined had a correlation with total fat of 0.499 (p<0.05); and, 4 questions when combined had a correlation with saturated fat of between 0.451 and 0.589 (p<0.05). A significant correlation could not be found for food behaviour questions with respect to dietary sodium. Correlations for fat as a function of energy could not be found.

The chemistry of acid catalyzed delignification of sugarcane bagasse in the ionic liquid trihexyl tetradecyl phosphonium chloride

This article reports on the cleavage of lignin ß-aryl ether bonds in sugarcane bagasse by the ionic liquid (IL) trihexyl tetradecyl phosphonium chloride [P66614] Cl, in the presence of catalytic amounts of mineral acid fca. 0.4%). The deligniflcation process of bagasse was studied over a range of temperatures (120°C to 150°C) by monitoring the production of ß-ketones (indicative of cleavage of ß-aryl ethers) using FTIR spectroscopy and by compositional analysis of the undissolved fractions. Maximum deligniflcation was obtained at 150°C, with 52% of lignin removed from the original lignin content of bagasse. No deligniflcation was observed in the absence of acid, which suggests that the reaction is acid catalyzed with the IL solubilizing the lignin fragments. The rate of deligniflcation was significantly higher at 150°C, suggesting that crossing the glass transition temperature of lignin effects greater freedom of rotation about the propanoid carbon-carbon bonds and leads to increased cleavage of ß-aryl ethers. An attempt has been made to propose a probable mechanism of deligniflcation of bagasse with the phosphonuim IL. © Taylor & Francis Group, LLC.

The Working After Cancer Study (WACS): a population-based study of middle-aged workers diagnosed with colorectal cancer and their return to work experiences

Background The number of middle-aged working individuals being diagnosed with cancer is increasing and so too will disruptions to their employment. The aim of the Working After Cancer Study is to examine the changes to work participation in the 12 months following a diagnosis of primary colorectal cancer. The study will identify barriers to work resumption, describe limitations on workforce participation, and evaluate the influence of these factors on health-related quality of life. Methods/Design An observational population-based study has been designed involving 260 adults newly-diagnosed with colorectal cancer between January 2010 and September 2011 and who were in paid employment at the time they were diagnosed. These cancer cases will be compared to a nationally representative comparison group of 520 adults with no history of cancer from the general population. Eligible cases will have a histologically confirmed diagnosis of colorectal cancer and will be identified through the Queensland Cancer Registry. Data on the comparison group will be drawn from the Household, Income and Labour Dynamics in Australia (HILDA) Survey. Data collection for the cancer group will occur at 6 and 12 months after diagnosis, with work questions also asked about the time of diagnosis, while retrospective data on the comparison group will be come from HILDA Waves 2009 and 2010. Using validated instruments administered via telephone and postal surveys, data will be collected on socio-demographic factors, work status and circumstances, and health-related quality of life (HRQoL) for both groups while the cases will have additional data collected on cancer treatment and symptoms, work productivity and cancer-related HRQoL. Primary outcomes include change in work participation at 12 months, time to work re-entry, work limitations and change in HRQoL status. Discussion This study will address the reasons for work cessation after cancer, the mechanisms people use to remain working and existing workplace support structures and the implications for individuals, families and workplaces. It may also provide key information for governments on productivity losses.

Ageing of people with an intellectual disability: Effective training for frontline workers

While the attainment of late life represents a significant achievement for people with an intellectual disability, increased life expectancy has resulted in growing concerns about the extent to which disability service providers are ready to meet the changing needs of increasing numbers of older people and facilitate their ongoing social inclusion. Training of frontline disability staff is widely accepted as an effective strategy for increasing organisational capacity to contribute to improved quality of life for people with an intellectual disability. The study identifies training needs analyses and 'ready-to-deliver' training programs for frontline disability services staff working with adults with an intellectual disability who are ageing, assesses whether the training programs contribute to improved quality of life outcomes for service users, and makes recommendations for future research and development of training for disability services staff who work with older people with intellectual disability.

Working in the Australian suburbs: Creative industries workers’ adaptation of traditional work spaces

The cultural and creative industries contribution to the economic and social sustainability of cities is a well acknowledged phenomenon which has accelerated in the era of urban renewal since the late twentieth century. The second-tier city of Brisbane, Australia was for many years considered a cultural backwater in the national context, yet its recent urban development within a short period of time has produced a city that now has all the hallmarks of a ‘creative city’. Brisbane’s transformation has been shaped by urban and cultural policies that are largely focussed around its inner-metropolitan localities, producing a growth in cultural infrastructure and the aestheticisation of inner-city precincts. However, like most Australian cities, the majority of Brisbane’s population live, and increasingly work in the suburbs. This article is based on a large research project that shows that creative industries workers are well represented across suburban localities. The article examines the policy and planning implications for creative industries located in Australian outer suburbs and the communities in which they are located.