Renewable energy sources in Latin America and the Caribbean: situation and policy proposals

Includes bibliography

Selektiver Nachweis von Uran-236 mittels hochauflösender Resonanzionisations-Massenspektrometrie

Die vorliegende Dissertation beschreibt die Entwicklung, den Aufbau und die Erprobung eines neuartigen lasermassenspektrometrischen Nachweises des Ultraspurenisotops 236U. Das Nuklid 236U wird vorwiegend in Kernreaktoren durch Neutroneneinfang aus 235U gebildet und dient damit als Schlüsselisotop zur Unterscheidung anthropogenen Urans von natürlichem Uran-Vorkommen. Mit seinem Nachweis wird die Untersuchung der Migration von Kernbrennstoff in der Umwelt und die Beantwortung kritischer Fragen in der nuklearen Forensik ermöglicht. Im Rahmen dieser Arbeit wurde das Verfahren der hochauflösenden Resonanzionisations-Massenspektrometrie auf die Anforderungen des selektiven Nachweises von Uran-Isotopen angepasst. Wesentliche Schritte waren hierbei die Untersuchung einer effizienten Atomisation von Uran-Proben, die Identifikation atomarer und autoionisierender Zustände für eine resonante Anregungsleiter, die vollständige Spezifikation der Anregungsleiter für alle Uran-Isotope und schließlich die Umsetzung der Erkenntnisse in ein analytisches Messverfahren. Die optische Selektivität des Verfahrens konnte durch Dichtematrixrechnungen zu ca. 14 Größenordnungen abgeschätzt werden; die Nachweisgrenze des Verfahrens für das Isotopenverhältnis 236U / 238U ist dabei gegenwärtig durch Untergrund begrenzt und beträgt ca. 3 · 10−8. Mit diesen Spezifikationen konnte die Linearität und Präzision des Nachweisverfahrens über einen dynamischen Bereich von vier Größenordnungen nachgewiesen werden.

Speciation of Pu(III) in the environmental system humic substances-groundwater-kaolinite

For the safety assessments of nuclear waste repositories, the possible migration of the radiotoxic waste into environment must be considered. Since plutonium is the major contribution at the radiotoxicity of spent nuclear waste, it requires special care with respect to its mobilization into the groundwater. Plutonium has one of the most complicated chemistry of all elements. It can coexist in 4 oxidation states parallel in one solution. In this work is shown that in the presence of humic substances it is reduced to the Pu(III) and Pu(IV). This work has the focus on the interaction of Pu(III) with natural occurring compounds (humic substances and clay minerals bzw. Kaolinite), while Pu(IV) was studied in a parallel doctoral work by Banik (in preparation). As plutonium is expected under extreme low concentrations in the environment, very sensitive methods are needed to monitor its presence and for its speciation. Resonance ionization mass spectrometry (RIMS), was used for determining the concentration of Pu in environmental samples, with a detection limit of 106- 107 atoms. For the speciation of plutonium CE-ICP-MS was routinely used to monitor the behaviour of Pu in the presence of humic substances. In order to reduce the detection limits of the speciation methods, the coupling of CE to RIMS was proposed. The first steps have shown that this can be a powerful tool for studies of pu under environmental conditions. Further, the first steps in the coupling of two parallel working detectors (DAD and ICP_MS ) to CE was performed, for the enabling a precise study of the complexation constants of plutonium with humic substances. The redox stabilization of Pu(III) was studied and it was determined that NH2OHHCl can maintain Pu(III) in the reduced form up to pH 5.5 – 6. The complexation constants of Pu(III) with Aldrich humic acid (AHA) were determined at pH 3 and 4. the logß = 6.2 – 6.8 found for these experiments was comparable with the literature. The sorption of Pu(III) onto kaolinite was studied in batch experiments and it was determine dthat the pH edge was at pH ~ 5.5. The speciation of plutonium on the surface of kaolinite was studied by EXAFS/XANES. It was determined that the sorbed species was Pu(IV). The influence of AHA on the sorption of Pu(III) onto kaolinite was also investigated. It was determined that at pH < 5 the adsorption is enhanced by the presence of AHA (25 mg/L), while at pH > 6 the adsorption is strongly impaired (depending also on the adding sequence of the components), leading to a mobilization of plutonium in solution.

Impact radiologique liés au transport de matières radioactives par route en Espagne / Radiological impact associated with the transport by road of radioactive material in Spain

Questions relating to the transport of radioactive materials are very much an issue of current interest due to the increasing mobility of the materials involved in the nuclear fuel cycle, commitment to the environment, the safety and protection of persons and the corresponding regulatory legal framework. The radiological impact associated with this type of transport was assessed by means of a new data-processing tool that may be of use and serve as complementary documentation to that included in transport regulations. Thus, by determining the level of radiation at a distance of one metre from the transport vehicle and by selecting a route, the associated impacts will be obtained, such as the affected populations, the dose received by the most highly exposed individual, the overall radiological impact, the doses received by the population along the route and the possible detriment to their health. The most important conclusion is that the emissions of ionising radiation from the transport of radioactive material by road in Spain are not significant as regards the generation of adverse effects on human health, and that their radiological impact may be considered negligible.

The radioactivity of atmospheric krypton in 1949–1950

The chemical element krypton, whose principal source is the atmosphere, had a long-lived radioactive content, in the mid-1940s, of less than 5 dpm per liter of krypton. In the late 1940s, this content had risen to values in the range of 100 dpm per liter. It is now some hundred times higher than the late 1940 values. This radioactivity is the result of the dissolving of nuclear fuel for military and civilian purposes, and the release thereby of the fission product krypton-85 (half-life = 10.71 years, fission yield = 0.2%). The present largest emitter of krypton-85 is the French reprocessing plant at Cap-de-la-Hague.

Estudo de modelos para o comportamento a altas queimas de varetas combustíveis de reatores a água leve pressurizada

Este trabalho tem como objetivo estudar as modificações introduzidas, ao longo de sucessivas versões, nos modelos empíricos do programa computacional FRAPCON utilizado para a simulação do comportamento sob irradiação de varetas combustíveis de Reatores a Água Leve Pressurizada (Pressurized Water Reactor - PWR) em regime de estado estacionário e sob condições de alta queima. No estudo, foram analisados os modelos empíricos utilizados pelo FRAPCON e que são apresentados em sua documentação oficial. Um estudo bibliográfico foi conduzido sobre os efeitos da alta queima em combustíveis nucleares visando melhorar o entendimento dos modelos utilizados pelo FRAPCON nestas condições. Foram feitas simulações do comportamento sob irradiação de uma vareta combustível típica de um reator PWR utilizando as versões 3.3, 3.4 e 3.5 do FRAPCON. Os resultados apresentados pelas diferentes versões do programa foram comparados entre si de forma a verificar as consequências das mudanças de modelo nos parâmetros de saída do programa. Foi possível observar que as modificações introduzidas trouxeram diferenças significativas nos resultados de parâmetros térmicos e mecânicos da vareta combustível, principalmente quando se evoluiu da versão FRAPCON-3.3 para a versão FRAPCON-3.5. Nessa ultima versão, obteve-se menores temperaturas na vareta combustível, menores tensões e deformações no revestimento, menor espessura da camada de oxido formada no revestimento a altas queimas na vareta combustível.

Desenvolvimento de um elemento combustível instrumentado para o reator de pesquisa IEA-R1

Após o aumento de potência do reator IEA-R1 de 2 MW para 5 MW observou-se um aumento da taxa de corrosão nas placas laterais de alguns elementos combustíveis e algumas dúvidas surgiram com relação ao valor de vazão utilizada nas análises termo-hidráulicas. A fim de esclarecer e medir a distribuição de vazão real pelos elementos combustíveis que compõe o núcleo do reator IEA-R1, um elemento combustível protótipo, sem material nuclear, chamado DMPV-01 (Dispositivo para Medida de Pressão e Vazão), em escala real, foi projetado e construído em alumínio. A vazão no canal entre dois elementos combustíveis é muito difícil de estimar ou ser medida. Esta vazão é muito importante no processo de resfriamento das placas laterais. Este trabalho apresenta a concepção e construção de um elemento combustível instrumentado para medir a temperatura real nestas placas laterais para melhor avaliar as condições de resfriamento do combustível. Quatorze termopares foram instalados neste elemento combustível instrumentado. Quatro termopares em cada canal lateral e quatro no canal central, além de um termopar no bocal de entrada e outro no bocal de saída do elemento. Existem três termopares para medida de temperatura do revestimento e um para a temperatura do fluido em cada canal. Três séries de experimentos, para três configurações distintas, foram realizadas com o elemento combustível instrumentado. Em dois experimentos uma caixa de alumínio foi instalada ao redor do núcleo para reduzir o escoamento transverso entre os elementos combustíveis e medir o impacto na temperatura das placas externas. Dada a tamanha quantidade de informações obtidas e sua utilidade no projeto, melhoria e capacitação na construção, montagem e fabricação de elementos combustíveis instrumentados, este projeto constitui um importante marco no estudo de núcleos de reatores de pesquisa. As soluções propostas podem ser amplamente utilizadas para outros reatores de pesquisa.

Ukraine and Russia: a hindered rapprochement. OSW Commentary No. 44, 2010-12-15

The policy of rapprochement with Russia that President Victor Yanukovych and his entourage had been actively promoting in the first months of his presidency has slowed down notably. One of the reasons for this lowered pace is that current talks between Russia and Ukraine concern the spheres in which Kyiv is not ready to make concessions to Russia. Despite numerous top-level meetings, recent months have failed to bring a breakthrough in energy issues of key importance. First of all, no compromise was reached in gas issues where the divergence of interests is particularly large and where Ukraine has adopted a tough stance to negotiate the best conditions possible. Even though some agreements were signed during the October session of the inter-governmental committee presided over by the prime ministers (the agreement on linking the two states’ aircraft production and on the joint construction of a nuclear fuel production plant), these resulted from prior agreements. Economic negotiations will continue in the coming months but the observed deadlock is not likely to be broken any time soon. The results of these talks are likely to reflect the interests of both Russia and Ukraine, as well as the competition among Ukrainian business groups, some of which opt for closer cooperation with their Eastern neighbour. Ukraine’s consent to send oil to Belarus along the Odessa-Brody pipeline shows that the government in Kyiv is ready to engage in projects they consider profitable, even those that run counter to Russian interests. Ukraine’s adoption of this stance may trigger irritation in Moscow and lead to a cooling in bilateral relations.

Prime Minister Fico’s Russian card. OSW COMMENTARY NUMBER NUMBER 175/01.07.2015

Since the beginning of the Ukrainian-Russian conflict, the position of Slovakia’s left-wing government towards Russia has been ambiguous. Bratislava has accepted the EU sanctions targeting Russia and the plan for strengthening NATO’s eastern flank. At the same time, however, Prime Minister Robert Fico’s government has maintained close political relations with the Kremlin. It has called for the intensification of Slovak-Russian economic relations and has repeatedly criticised the sanctions, speaking in tandem with Russian propaganda in so doing. Slovakia’s Prime Minister is hoping that by playing the role of one of the leaders in the EU and NATO who are most willing to cooperate with Russia, he will gain economic benefits and win votes in next spring’s upcoming parliamentary elections. Despite numerous pro-Russian gestures, Slovakia has been limiting the number of areas in which Moscow could exert pressure on Bratislava. As it strives to become independent of Russia, Slovakia has ensured possible alternative fuel supplies for itself. Moreover, it has been gradually replacing Russian-made military equipment with equipment made in the West. The Slovak government does intend to develop the country’s cooperation with Russia, including in strategic areas involving supplies and transit of oil and gas, as well as supplies of nuclear fuel. Nevertheless, it has been making efforts to gain easy access to an alternative source of supplies in each of these areas. Beset by crises, Russia has ever fewer economic cooperation opportunities to offer Slovakia, and Slovak businesses operating on the Russian market have to take into account the growing risk of insolvency of local contractors. To a great extent, therefore, Slovak-Russian relations have been reduced to rhetorical statements confirming the desire for closer cooperation, and to visions of joint projects accompanied by an ever shorter list of feasible cooperation initiatives.

Summaries of fuels and materials development programs /

"August 1960."

Summaries of fuels and materials development programs /

"April 1961."

Summaries of fuels and materials development programs /

AEC Report No. TID-6506 Pt. 1, 2nd ed.

Summaries of fuels and materials development programs /

"Metals, Ceramics, and Materials (TID-4500, 41st Ed.)."

Summary report :

"December 22, 1959."