Chapter 6 Economic integration and changes in industrial location in Vietnam

Vietnam has been praised for its achievements in economic growth and success in poverty reduction over the last two decades. The incidence of poverty reportedly fell from 58.1% in 1993 to 19.5% in 2004 (VASS [2006, 13]). The country is also considered to have only a moderate level of aggregate economic inequality by international comparisons. As of the early 2000s, Vietnam’s consumption-based Gini coefficient is found to be comparable to that of other countries with similar levels of per capita GDP. The Gini index did increase between 1993 and 2004, but rather slowly, from 0.34 to 0.37 (VASS [2006, 13]). Yet, as the country moves on with its market oriented reforms, the question of inequality has been highlighted in policy and academic discourses. In particular, it is pointed out that socio-economic inequalities between regions (or provinces) are significant and have been widening behind aggregate figures (NCSSH [2001], Mekong Economics [2005], VASS [2006]). Between 1993 and 2004, while real per capita expenditure increased in all regions, it grew fastest in those regions with the highest per capita expenditures and vice versa, resulting in greater regional disparities (VASS [2006, 37]). A major contributing factor to such regional inequalities is the uneven distribution of industry within the country. According to the Statistical Yearbook of Vietnam, of the country's gross industrial output in 2007, over 50% belongs to the South East region, close to 25% to the Red River Delta, and about 10% to the Mekong River Delta. All remaining regions share some 10% of the country's gross industrial output. At a quick glance, the South East increased its share of the total industrial gross output in the 1990s, while the Red River Delta started to gain ground in more recent years. How can the government deal with regional disparities is a valid question. In order to offer an answer, it is necessary in the first place to grasp the trend of disparities as well as its background. To that end, this paper is a preparatory endeavor. Regional disparities in industrial activities can essentially be seen as a result of the location decisions of enterprises. While the General Statistics Office (GSO) of Vietnam has conducted one enterprise census (followed by annual enterprise surveys) and two stages of establishment censuses since 2000, sectorally and geographically disaggregated data are not readily available. Therefore, for the moment, we will draw on earlier studies of industrial location and the determinants of enterprises’ location decisions in Vietnam. The remainder of this paper is structured as follows. The following two sections deal with the country context. Section 2 will outline some major developments in Vietnam’s international economic relations that may affect sub-national location of industry. According to the theory of spatial economics, economic integration is seen as a major driver of changes in industrial location, both between and within countries (Nishikimi [2008]). Section 3, on the other hand, will consider some possible factors affecting geographic distribution of industry in the domestic sphere. In Section 4, existing literature on industrial and firm location will be examined, and Section 5 will briefly summarize the findings and suggest some areas for future research.

Chapter 7 Clusters of Modern and Local Industries in Vietnam

Since the introduction of the Doi Moi ('renovation') economic reform in 1986, Vietnam has experienced a transformation of its economic management, from a central planning economy to a market-oriented economy. High economic growth, created by the liberalization of activities in all sectors of the economy, has changed the economic structure of the country, and the once agriculture-based and poverty-stricken land now generates a midlevel income and possesses many industrial bases. Economic growth has also changed the landscape of the country. Business complexes have been built in metropolises like Ho Chi Minh City and Hanoi, and rice fields have been converted into industrial zones. As the number of enterprises increased, areas began to emerge where many enterprises agglomerated. Some of these 'clusters' were groups of cottage industry households, while many others were large-scale industrial clusters. As Porter [1998] argues, industrial clusters are the source of a nation's 'competitive advantage'. McCarty et al. [2005] indicate that in some key industries in Vietnam, some clusters of enterprises have been created, although the degree of agglomeration differs from one industry to another. Using industry census data from 2001, they include dot density maps for the 12 leading manufacturing industries in Vietnam. They show that most of the industries analyzed are clustered either in Hanoi or Ho Chi Minh City (or both). Among these 12 industries, the garments industry has the greatest tendency to cluster, followed by textile, rice, seafood, and paper industries. The fact that industrial clusters have begun to form in some areas could be a positive sign for Vietnam's future economic development. What is lacking in McCarty et al. [2005], however, is the identification of the participants in the industrial clusters. Some argue for the importance of small and medium enterprises (SMEs) in Vietnam's economic development (e.g. Nguyen Tri Thanh [2007], Tran Tien Cuong et al. [2008]), while others stress the impact of foreign direct investments (FDI) (for example, Tuan Bui [2009]). Adding information about the participants in the above cluster study (and in other studies of spatial patterns of location of enterprises) may broaden the scope for analysis of economic development in Vietnam. This study aims to reveal the characteristics of industrial clusters in terms of their participants and locations. The findings of the study may provide basic information for evaluating the effects of agglomeration and the robustness of the effects in the industrial clusters in Vietnam. Section 1 describes the characteristics of economic entities in Vietnam such as ownership, size of enterprise, and location. Section 2 examines qualitative aspects of industrial clusters identified in McCarty et al. [2005] and uses information on the size and ownership of clusters. Three key industries (garments, consumer electronics, and motor vehicle) are selected for the study. Section 3 identifies another type of cluster commonly seen in Vietnam, composed of local industries and called 'craft villages'. Many such villages have been developed since the early 1990s. The study points out that some of these villages have become industrialized (or are becoming industrialized) by introducing modern modes of production and by employing thousands of laborers.

Chapter 8 Location Choice of Japanese Multinationals: Country Characteristics or Region Characteristics?

In the present global era in which firms choose the location of their plants beyond national borders, location characteristics are important for attracting multinational enterprises (MNEs). The better access to countries with large market is clearly attractive for MNEs. For example, special treatments on tariffs such as the Generalized System of Preferences (GSP) are beneficial for MNEs whose home country does not have such treatments. Not only such country characteristics but also region characteristics (i.e. province-level or city-level ones) matter, particularly in the case that location characteristics differ widely between a nation's regions. The existence of industrial concentration, that is, agglomeration, is a typical regional characteristic. It is with consideration of these country-level and region-level characteristics that MNEs decide their location abroad. A large number of academic studies have investigated in what kinds of countries MNEs locate, i.e. location choice analysis. Employing the usual new economic geography model (i.e. constant elasticity of substitution (CES) utility function, Dixit-Stiglitz monopolistic competition, and ice-berg trade costs), the literature derives the profit function, of which coefficients are estimated using maximum likelihood procedures. Recent studies are as follows: Head, Rise, and Swenson (1999) for Japanese MNEs in the US; Belderbos and Carree (2002) for Japanese MNEs in China; Head and Mayer (2004) for Japanese MNEs in Europe; Disdier and Mayer (2004) for French MNEs in Europe; Castellani and Zanfei (2004) for large MNEs worldwide; Mayer, Mejean, and Nefussi (2007) for French MNEs worldwide; Crozet, Mayer, and Mucchielli (2004) for MNEs in France; and Basile, Castellani, and Zanfei (2008) for MNEs in Europe. At the present time, three main topics can be found in this literature. The first introduces various location elements as independent variables. The above-mentioned new economic geography model usually yields the profit function, which is a function of market size, productive factor prices, price of intermediate goods, and trade costs. As a proxy for the price of intermediate goods, the measure of agglomeration is often used, particularly the number of manufacturing firms. Some studies employ more disaggregated numbers of manufacturing firms, such as the number of manufacturing firms with the same nationality as the firms choosing the location (e.g., Head et al., 1999; Crozet et al., 2004) or the number of firms belonging to the same firm group (e.g., Belderbos and Carree, 2002). As part of trade costs, some investment climate measures have been examined: free trade zones in the US (Head et al., 1999), special economic zones and opening coastal cities in China (Belderbos and Carree, 2002), and Objective 1 structural funds and cohesion funds in Europe (Basile et al., 2008). Second, the validity of proxy variables for location elements is further examined. Head and Mayer (2004) examine the validity of market potential on location choice. They propose the use of two measures: the Harris market potential index (Harris, 1954) and the Krugman-type index used in Redding and Venables (2004). The Harris-type index is simply the sum of distance-weighted real GDP. They employ the Krugman-type market potential index, which is directly derived from the new economic geography model, as it takes into account the extent of competition (i.e. price index) and is constructed using estimators of importing country dummy variables in the well-known gravity equation, as in Redding and Venables (2004). They find that "theory does not pay", in the sense that the Harris market potential outperforms Krugman's market potential in both the magnitude of its coefficient and the fit of the model to be estimated. The third topic explores the substitution of location by examining inclusive values in the nested-logit model. For example, using firm-level data on French investments both in France and abroad over the 1992-2002 period, Mayer et al. (2007) investigate the determinants of location choice and assess empirically whether the domestic economy has been losing attractiveness over the recent period or not. The estimated coefficient for inclusive value is strongly significant and near unity, indicating that the national economy is not different from the rest of the world in terms of substitution patterns. Similarly, Disdier and Mayer (2004) investigate whether French MNEs consider Western and Eastern Europe as two distinct groups of potential host countries by examining the coefficient for the inclusive value in nested-logit estimation. They confirm the relevance of an East-West structure in the country location decision and furthermore show that this relevance decreases over time. The purpose of this paper is to investigate the location choice of Japanese MNEs in Thailand, Cambodia, Laos, Myanmar, and Vietnam, and is closely related to the third topic mentioned above. By examining region-level location choice with the nested-logit model, I investigate the relative importance of not only country characteristics but also region characteristics. Such investigation is invaluable particularly in the case of location choice in those five countries: industrialization remains immature in those countries which have not yet succeeded in attracting enough MNEs, and as a result, it is expected that there are not yet crucial regional variations for MNEs within such a nation, meaning the country characteristics are still relatively important to attract MNEs. To illustrate, in the case of Cambodia and Laos, one of the crucial elements for Japanese MNEs would be that LDC preferential tariff schemes are available for exports from Cambodia and Laos. On the other hand, in the case of Thailand and Vietnam, which have accepted a relatively large number of MNEs and thus raised the extent of regional inequality, regional characteristics such as the existence of agglomeration would become important elements in location choice. Our sample countries seem, therefore, to offer rich variations for analyzing the relative importance between country characteristics and region characteristics. Our empirical strategy has a further advantage. As in the third topic in the location choice literature, the use of the nested-logit model enables us to examine substitution patterns between country-based and region-based location decisions by MNEs in the concerned countries. For example, it is possible to investigate empirically whether Japanese multinational firms consider Thailand/Vietnam and the other three countries as two distinct groups of potential host countries, by examining the inclusive value parameters in nested-logit estimation. In particular, our sample countries all experienced dramatic changes in, for example, economic growth or trade costs reduction during the sample period. Thus, we will find the dramatic dynamics of such substitution patterns. Our rigorous analysis of the relative importance between country characteristics and region characteristics is invaluable from the viewpoint of policy implications. First, while the former characteristics should be improved mainly by central government in each country, there is sometimes room for the improvement of the latter characteristics by even local governments or smaller institutions such as private agencies. Consequently, it becomes important for these smaller institutions to know just how crucial the improvement of region characteristics is for attracting foreign companies. Second, as economies grow, country characteristics become similar among countries. For example, the LCD preferential tariff schemes are available only when a country is less developed. Therefore, it is important particularly for the least developed countries to know what kinds of regional characteristics become important following economic growth; in other words, after their country characteristics become similar to those of the more developed countries. I also incorporate one important characteristic of MNEs, namely, productivity. The well-known Helpman-Melitz-Yeaple model indicates that only firms with higher productivity can afford overseas entry (Helpman et al., 2004). Beyond this argument, there may be some differences in MNEs' productivity among our sample countries and regions. Such differences are important from the viewpoint of "spillover effects" from MNEs, which are one of the most important results for host countries in accepting their entry. The spillover effects are that the presence of inward foreign direct investment (FDI) aises domestic firms' productivity through various channels such as imitation. Such positive effects might be larger in areas with more productive MNEs. Therefore, it becomes important for host countries to know how much productive firms are likely to invest in them. The rest of this paper is organized as follows. Section 2 takes a brief look at the worldwide distribution of Japanese overseas affiliates. Section 3 provides an empirical model to examine their location choice, and lastly, we discuss future works to estimate our model.

Random positions of dendritic spines in human cerebral cortex

Dendritic spines establish most excitatory synapses in the brain and are located in Purkinje cell’s dendrites along helical paths, perhaps maximizing the probability to contact different axons. To test whether spine helixes also occur in neocortex, we reconstructed >500 dendritic segments from adult human cortex obtained from autopsies. With Fourier analysis and spatial statistics, we analyzed spine position along apical and basal dendrites of layer 3 pyramidal neurons from frontal, temporal, and cingulate cortex. Although we occasionally detected helical positioning, for the great majority of dendrites we could not reject the null hypothesis of spatial randomness in spine locations, either in apical or basal dendrites, in neurons of different cortical areas or among spines of different volumes and lengths. We conclude that in adult human neocortex spine positions are mostly random. We discuss the relevance of these results for spine formation and plasticity and their functional impact for cortical circuits.

Random positioning of dendritic spines in the human cerebral cortex

Dendritic spines establish most excitatory synapses in the brain and are located in Purkinje cell?s dendrites along helical paths, perhaps maximizing the probability to contact different axons. To test whether spine helixes also occur in neocortex, we reconstructed ?500 dendritic segments from adult human cortex obtained from autopsies. With Fourier analysis and spatial statistics, we analyzed spine position along apical and basal dendrites of layer 3 pyramidal neurons from frontal, temporal, and cingulate cortex. Although we occasionally detected helical positioning, for the great majority of dendrites we could not reject the null hypothesis of spatial randomness in spine locations, either in apical or basal dendrites, in neurons of different cortical areas or among spines of different volumes and lengths. We conclude that in adult human neocortex spine positions are mostly random. We discuss the relevance of these results for spine formation and plasticity and their functional impact for cortical circuits.

Bayesian inference for wind field retrieval

In many problems in spatial statistics it is necessary to infer a global problem solution by combining local models. A principled approach to this problem is to develop a global probabilistic model for the relationships between local variables and to use this as the prior in a Bayesian inference procedure. We show how a Gaussian process with hyper-parameters estimated from Numerical Weather Prediction Models yields meteorologically convincing wind fields. We use neural networks to make local estimates of wind vector probabilities. The resulting inference problem cannot be solved analytically, but Markov Chain Monte Carlo methods allow us to retrieve accurate wind fields.

Bayesian inference for wind field retrieval

In many problems in spatial statistics it is necessary to infer a global problem solution by combining local models. A principled approach to this problem is to develop a global probabilistic model for the relationships between local variables and to use this as the prior in a Bayesian inference procedure. We show how a Gaussian process with hyper-parameters estimated from Numerical Weather Prediction Models yields meteorologically convincing wind fields. We use neural networks to make local estimates of wind vector probabilities. The resulting inference problem cannot be solved analytically, but Markov Chain Monte Carlo methods allow us to retrieve accurate wind fields.

Exchanging uncertainty: interoperable geostatistics?

Traditionally, geostatistical algorithms are contained within specialist GIS and spatial statistics software. Such packages are often expensive, with relatively complex user interfaces and steep learning curves, and cannot be easily integrated into more complex process chains. In contrast, Service Oriented Architectures (SOAs) promote interoperability and loose coupling within distributed systems, typically using XML (eXtensible Markup Language) and Web services. Web services provide a mechanism for a user to discover and consume a particular process, often as part of a larger process chain, with minimal knowledge of how it works. Wrapping current geostatistical algorithms with a Web service layer would thus increase their accessibility, but raises several complex issues. This paper discusses a solution to providing interoperable, automatic geostatistical processing through the use of Web services, developed in the INTAMAP project (INTeroperability and Automated MAPping). The project builds upon Open Geospatial Consortium standards for describing observations, typically used within sensor webs, and employs Geography Markup Language (GML) to describe the spatial aspect of the problem domain. Thus the interpolation service is extremely flexible, being able to support a range of observation types, and can cope with issues such as change of support and differing error characteristics of sensors (by utilising descriptions of the observation process provided by SensorML). XML is accepted as the de facto standard for describing Web services, due to its expressive capabilities which allow automatic discovery and consumption by ‘naive’ users. Any XML schema employed must therefore be capable of describing every aspect of a service and its processes. However, no schema currently exists that can define the complex uncertainties and modelling choices that are often present within geostatistical analysis. We show a solution to this problem, developing a family of XML schemata to enable the description of a full range of uncertainty types. These types will range from simple statistics, such as the kriging mean and variances, through to a range of probability distributions and non-parametric models, such as realisations from a conditional simulation. By employing these schemata within a Web Processing Service (WPS) we show a prototype moving towards a truly interoperable geostatistical software architecture.

Projected sequential Gaussian processes: flexible interpolation for large data sets

Recently within the machine learning and spatial statistics communities many papers have explored the potential of reduced rank representations of the covariance matrix, often referred to as projected or fixed rank approaches. In such methods the covariance function of the posterior process is represented by a reduced rank approximation which is chosen such that there is minimal information loss. In this paper a sequential framework for inference in such projected processes is presented, where the observations are considered one at a time. We introduce a C++ library for carrying out such projected, sequential estimation which adds several novel features. In particular we have incorporated the ability to use a generic observation operator, or sensor model, to permit data fusion. We can also cope with a range of observation error characteristics, including non-Gaussian observation errors. Inference for the variogram parameters is based on maximum likelihood estimation. We illustrate the projected sequential method in application to synthetic and real data sets. We discuss the software implementation and suggest possible future extensions.

Projected sequential Gaussian processes:a C++ tool for interpolation of large datasets with heterogeneous noise

Heterogeneous datasets arise naturally in most applications due to the use of a variety of sensors and measuring platforms. Such datasets can be heterogeneous in terms of the error characteristics and sensor models. Treating such data is most naturally accomplished using a Bayesian or model-based geostatistical approach; however, such methods generally scale rather badly with the size of dataset, and require computationally expensive Monte Carlo based inference. Recently within the machine learning and spatial statistics communities many papers have explored the potential of reduced rank representations of the covariance matrix, often referred to as projected or fixed rank approaches. In such methods the covariance function of the posterior process is represented by a reduced rank approximation which is chosen such that there is minimal information loss. In this paper a sequential Bayesian framework for inference in such projected processes is presented. The observations are considered one at a time which avoids the need for high dimensional integrals typically required in a Bayesian approach. A C++ library, gptk, which is part of the INTAMAP web service, is introduced which implements projected, sequential estimation and adds several novel features. In particular the library includes the ability to use a generic observation operator, or sensor model, to permit data fusion. It is also possible to cope with a range of observation error characteristics, including non-Gaussian observation errors. Inference for the covariance parameters is explored, including the impact of the projected process approximation on likelihood profiles. We illustrate the projected sequential method in application to synthetic and real datasets. Limitations and extensions are discussed. © 2010 Elsevier Ltd.

Mortalidade segundo sua causa de morte e seus determinantes: uma análise para as capitais brasileiras e municípios do nordeste do Brasil, 2000 e 2010

This dissertation considered the development of two papers, both related to mortality in Brazil. In the first article, "The context of mortality according to the three broad groups of causes of death in Brazilian capitals, 2000 and 2010", the objective was to analyze the mortality rate according to the three major groups of causes of death in Brazilian capitals. In the second article, "Typology and characteristics of mortality from external causes in the municipalities in the Northeast of Brazil, 2000 and 2010", it was built up a typology for the Northeastern municipalities taking into account information on mortality from external causes and a set of indicators related to socioeconomic, demographic, and infrastructure aspects of such municipalities, both articles for the years 2000 and 2010. Thus, we used data from the Mortality Information System of the Ministry of Health. Furthermore, it was used information from the Demographic Census for those years. The variables relating to socioeconomic and demographic conditions used in this study were those available on the home page of the United Nations Program for Development. The variables relating to socioeconomic and demographic conditions used in this study were those available on the home page of the United Nations Program for Development. Was used in Article 1 the pro-rata distribution method to accomplish the redistribution of ill-defined causes. Moreover, made use of the technique of cluster analysis with the aim of grouping the capital that had proportions of deaths from ill-defined causes similar to each other. Already in Section 2, we used the technique of Empirical Bayesian estimation; spatial statistics technique; and finally, the Grade of Membership method to find types of municipalities from information on mortality from external causes associated with socioeconomic, demographic and infrastructure variables. As the main results, it stands out in Article 1, in relation to data quality, we observed the formation of four groups of similar capital between themselves, as the proportion of illdefined causes. Regarding the behavior of mortality, according to the three major groups of causes of death, it was noted both for 2000 and for 2010 the prevalence of deaths from noncommunicable diseases for both sexes, although the reduction was identified rates in some of the capitals. Communicable diseases stood out as the second cause of death among women. Also, we found that deaths due to external causes are responsible for the second cause of death among men, as well as presenting an increase among women. As for the Article 2, stands out, in general, not just an extension of mortality from external causes in the municipalities, as well as an enlargement of the configurator stain existence of external cause deaths for the whole area of Northeast. Regarding the typology of municipalities, three vi extreme profiles were buit: the profile 1, which comprises municipalities with high rates of mortality from external causes and the best social indicators; the profile 2, that was composed of municipalities that are characterized by having low mortality rates from external causes and the lowest social indicators; and the profile 3, that brings together municipalities with intermediate mortality rates and median values considered in relation to social indicators. Although we have not seen changes in the characteristics of the profiles, we observed an increase in the proportion of municipalities that belong to the extreme profile 3, taking into account the mixed profiles.

Lianas and soil nutrients predict fine-scale distribution of above-ground biomass in a tropical moist forest

Acknowledgements. This study was supported by the FP7-PEOPLE-2013-IEF Marie-Curie Action – SPATFOREST. Tree data from BCI were provided by the Center for Tropical Forest Science of the Smithsonian Tropical Research Institute and the primary granting agencies that have supported the BCI plot tree census. Data for the liana censuses were supported by the US National Science Foundation grants: DEB-0613666, DEB-0845071, and DEB-1019436 (to SAS). Soil data was funded by the National Science Foundation grants DEB021104, DEB021115, DEB0212284 and DEB0212818 supporting soils mapping in the BCI plot. We thank Helene Muller-Landau for providing some data on tree height for some BCI trees. We also thank all the people that contributed to obtain the data.

Inter-site and inter-scanner diffusion MRI data harmonization.

We propose a novel method to harmonize diffusion MRI data acquired from multiple sites and scanners, which is imperative for joint analysis of the data to significantly increase sample size and statistical power of neuroimaging studies. Our method incorporates the following main novelties: i) we take into account the scanner-dependent spatial variability of the diffusion signal in different parts of the brain; ii) our method is independent of compartmental modeling of diffusion (e.g., tensor, and intra/extra cellular compartments) and the acquired signal itself is corrected for scanner related differences; and iii) inter-subject variability as measured by the coefficient of variation is maintained at each site. We represent the signal in a basis of spherical harmonics and compute several rotation invariant spherical harmonic features to estimate a region and tissue specific linear mapping between the signal from different sites (and scanners). We validate our method on diffusion data acquired from seven different sites (including two GE, three Philips, and two Siemens scanners) on a group of age-matched healthy subjects. Since the extracted rotation invariant spherical harmonic features depend on the accuracy of the brain parcellation provided by Freesurfer, we propose a feature based refinement of the original parcellation such that it better characterizes the anatomy and provides robust linear mappings to harmonize the dMRI data. We demonstrate the efficacy of our method by statistically comparing diffusion measures such as fractional anisotropy, mean diffusivity and generalized fractional anisotropy across multiple sites before and after data harmonization. We also show results using tract-based spatial statistics before and after harmonization for independent validation of the proposed methodology. Our experimental results demonstrate that, for nearly identical acquisition protocol across sites, scanner-specific differences can be accurately removed using the proposed method.

Methods for Confounding Adjustment and High-Dimensional Environmental Exposures

Thesis (Ph.D.)--University of Washington, 2016-08

Bayesian alignment of continuous molecular shapes using random fields

Statistical methodology is proposed for comparing molecular shapes. In order to account for the continuous nature of molecules, classical shape analysis methods are combined with techniques used for predicting random fields in spatial statistics. Applying a modification of Procrustes analysis, Bayesian inference is carried out using Markov chain Monte Carlo methods for the pairwise alignment of the resulting molecular fields. Superimposing entire fields rather than the configuration matrices of nuclear positions thereby solves the problem that there is usually no clear one--to--one correspondence between the atoms of the two molecules under consideration. Using a similar concept, we also propose an adaptation of the generalised Procrustes analysis algorithm for the simultaneous alignment of multiple molecular fields. The methodology is applied to a dataset of 31 steroid molecules.