Technological and organisational change in small- to medium-sized manufacturing companies:a learning organisation perspective

This paper examines the extent to which a learning organisation perspective is attainable in small- to medium-sized manufacturing companies. An audit tool is developed from the literature on organisational learning and recognised processes that lead towards becoming a learning organisation. The paper focuses on the application of the audit tool in three UK automotive component suppliers which are all experiencing pressures for change imposed by the major vehicle manufacturers. The main changes are concerned with tiering of the supply chain and substantial delegation of responsibilities to component suppliers including an increasing emphasis on innovation and continuous improvement. The companies presented in the paper are taken from a research project into the impact of changes in supply chain relationships on the operation of small- and medium-sized manufacturing firms in the West Midlands region of the UK. The ways in which the companies are responding to change are presented together with the results of a self-assessment using the developed audit tool. These results suggest that companies of this type tend to focus on change in those areas that involve least challenge to the established power and authority of management.

Small and medium-sized enterprises and regional economic growth in Brazil

This paper examines the relationship between the small and medium-sized enterprise (SME) sector and economic growth for an annual panel of Brazilian states for the period 1985–2004. We investigate the importance of the relative size of the SME sector measured by the share of SME employment in total formal employment and the level of human capital in SMEs measured by the average years of schooling of SME employees. The empirical results indicate that the relative importance of SMEs is negatively correlated with economic growth, a result that is consistent with previous studies examining developing countries. In addition, our results show that the human capital embodied in SMEs may be more important for economic growth than the relative size of the SME sector.

Internationalization of small and medium sized UK manufacturing enterprises:technology and knowledge transfer perspective

This dissertation examines internationalisation of small and medium sized enterprises. There has been a journey to achieve this. The research has started as an action research as Teaching Company Scheme Associate. This has been done in two research cycles, which investigated factors for successful internationalisation of a small and medium sized UK manufacturing enterprise. This has revealed that successful internationalisation requires good technology and knowledge transfer to the new operations. The action research is followed by a survey that has been conducted within UK manufacturing companies. The data collected was analysed under three models: entry mode selection, role of factory and level of internationalisation. The first two models explain two major aspects of internationalisation decision. The last is showing what makes successful internationalising small and medium sized companies. These models provided several important results. The small and medium sized enterprise internationalisation is harder to achieve because most of these organisations do not have experience in technology and knowledge transfer. The success of internationalisation depends on the success of the transfer. This is achieved through employee ownership of the new knowledge. There are many factors affecting this result such as the network relationships such as trust, control and commitment and cognitive distance between two organisations. The last is a product of the difference between prior knowledge and the required level of knowledge. The entry mode and role of factory are decided through these factors while the level of internationalisation can only be explained by absorptive capacity of the recipient organisation and the technology transfer ability of the host organisation.

Determinants of Decentralization within the Firm: Some Empirical Evidence from Spanish Small and Medium- Sized Enterprise

This paper examines empirically the determinants of decentralization of decision- making in the firm for small and medium-sized enterprises (SMEs) that tend to be highly centralized. By decentralization of decisions we mean the delegation of decision rights from the owner or manager to the plant supervisor or even to floor workers. Our findings show that the allocation of authority to basic workers or a team of workers depends on firm characteristics such as firm size, the use of internal networks or the number of workplaces, and workers characteristics, in particular, the composition of the laborforce in terms of education and seniority and whether or not workers receive pay incentives. External factors such as the intensity of competition and the firm s export intensity are also important determinants of the allocation of authority.

Information technology for development of small and medium-sized exporters in Latin America and East Asia

Includes bibliography

A beszerzés helye és szerepe a kis és középvállalatok gyakorlatában = The role of purchasing in small and medium sized companies

A tanulmány a szakirodalom azon egyre szélesedő részéhez járul hozzá, amely a kis és középvállalatok gyakorlatával, sajátosságaik vizsgálatával foglalkozik. Egy speciális aspektust emel ki, mely a hazai nagyvállalati működésben jelentős fejlődésen ment keresztül azzal, hogy a KKV-k beszerzési sajátosságainak megismerését célozza meg. Az áttekintő kép kialakításához a nemzetközi szakirodalomban elérhető empirikus eredményeket és a BCE-n folyó Versenyképesség Kutatás kérdőíves adatbázisának válaszait dolgozza fel. Olyan kérdéseket emel ki, mint a beszerzés szerepe a KKV-k működésében és az azt befolyásoló tényezők illetve a beszerzési gyakorlat sajátosságai. _________ Small and medium sized enterprises play an important role in every economy. This article aims to contribute to the growing number of literature focusing on SMEs management practice. It highlights a management field, which has gone through a significant development in large companies’ practice as it investigates the purchasing and supplier management related issues. The overview is based on a review of literature and the analysis of the survey database of Competitiveness Research of CUB. It highlights such topics as the role of purchasing in SMEs, factors influencing the perceived importance and the purchasing practice of SME-s.

Purchasing and supply management capabilities in Finnish medium-sized enterprises

Purchasing and supply management (PSM) has become increasingly important for companies to survive in current highly competitive market. Increased outsourcing has extended the role of PSM, making external resource management and supplier relationships critical success factors in business. However, the recent research has mainly concentrated on large enterprises. Therefore the PSM issues related to medium-sized enterprises represent a significant research area. The thesis aims to explore the status and role of PSM in Finnish medium-sized firms, understand how strategic companies consider PSM to be, clarify what are the competence requirements for PSM professionals, and increase the understanding of PSM capabilities needed from the points view of individual competence and organisational capabilities. The study uses data that was collected in 2007 from purchasing executives at the director/CEO level representing a sample of 94 Finnish firms. 54 % of the respondent enterprises had a supply strategy. The total supply cost was on average 60 % of firms' turnover. Centralisation of PSM and outsourcing of logistics will increase in Finnish medium-sized enterprises. The findings point out that Finnish medium-sized enterprises had strategical features of PSM. However, Finnish firms have not concentrated on making strategies that relate to PSM. The elements that explain the existence of a supply strategy could be found in this study. It can be concluded from this study that there is an advantageous base for the development of strategic PSM, because nearly all the enterprises were of the opinion that PSM capabilities have an effect on business success. When reviewing the organisational capabilities, the five most important development elements were supplier relationships, both operational and strategic processes, time management, and personnel's competence. Training in internationalisation, strategic management, and communication could help to improve competences of PSM personnel.

Business implications of manufacturing innovation : the experience of increasing automation in smaller to medium sized companies.

Despite the considerable potential of advanced manufacturing technologies (AMT) for improving the economic performance of many firms, a growing body of literature highlights many instances where realising this potential has proven to be a more difficult task than initially envisaged. Focussing upon the implementation of new manufacturing technologies in several smaller to medium sized enterprises (SME), the research examines the proposition that many of these problems can be attributed in part to inadequate consideration of the integrated nature of such technologies, where the effects of their implementation are not localised, but are felt throughout a business. The criteria for the economic evaluation of such technologies are seen as needing to reflect this, and the research develops an innovative methodology employing micro-computer based spreadsheets, to demonstrate how a series of financial models can be used to quantify the effects of new investments upon overall company performance. Case studies include: the development of a prototype machine based absorption costing system to assist in the evaluation of CNC machine tool purchases in a press making company; the economics and strategy of introducing a flexible manufacturing system for the production of ballscrews; and analysing the progressive introduction of computer based printing presses in a packaging and general print company. Complementary insights are also provided from discussion with the management of several other companies which have experienced technological change. The research was conducted as a collaborative CASE project in the Interdisciplinary Higher Degrees Scheme and was jointly funded by the SERC and Gaydon Technology Limited and later assisted by PE-Inbucon. The findings of the research shows that the introduction of new manufacturing technologies usually requires a fundamental rethink of the existing practices of a business. In particular, its implementation is seen as ideally needing to take place as part of a longer term business and manufacturing strategy, but that short term commercial pressures and limited resources often mean that firms experience difficulty in realising this. The use of a spreadsheet based methodology is shown to be of considerable assistance in evaluating new investments, and is seen as being the limit of sophistication that a smaller business is willing to employ. Several points for effective modelling practice are also given, together with an outline of the context in which a modelling approach is most applicable.

MERCOSUR: its challenges to small and medium-sized industrial enterprises in terms of competition

Includes bibliography

Russia, China, India Foresight for Small and Medium size Enterprises in Uusimaa : Changes forecast in the Russian, Chinese and Indian operating environments from the viewpoint of small and middle-sized enterprises in Uusimaa

The report describes those factors of the future that are related to the growth and needs of Russia, China, and India and that may provide significant internationalisation potential for Uusimaa companies. The report examines the emerging trends and market-entry challenges for each country separately. Additionally, it evaluates the training needs of Uusimaa companies in terms of the current offerings available for education on topics related to Russia, China, and India. The report was created via the Delphi method: experts were interviewed, and both Trendwiki material and the latest literature were used to create a summary of experts’ views, statements, and reasons behind recent developments. This summary of views was sent back to the experts with the objective of reaching consensus synthesising the differing views or, at least, of providing argumentation for the various alternative lines of development. In addition to a number of outside experts and business leaders, all heads of Finpro’s Finland Trade Centers participated in the initial interviews. The summary was commented upon by all Finpro consultants and analysts for Russia, China, and India, with each focusing on his or her own area of expertise. The literature used consisted of reports, listed for each country, and an extensive selection of the most recent newspaper articles. The report was created in January-April 2010. On 22 April 2010 its results were reviewed at the final report presentation in cooperation with the Uusimaa ELY Centre.

PRODUCT DATA MANAGEMENT FOR FINNISH SMALL AND MEDIUM-SIZED MANUFACTURING ENTERPRISES - Towards a viable information system concept

Product Data Management (PDM) systems have been utilized within companies since the 1980s. Mainly the PDM systems have been used by large companies. This thesis presents the premise that small and medium-sized companies can also benefit from utilizing the Product Data Management systems. Furthermore, the starting point for the thesis is that the existing PDM systems are either too expensive or do not properly respond to the requirements SMEs have. The aim of this study is to investigate what kinds of requirements and special features SMEs, operating in Finnish manufacturing industry, have towards Product Data Management. Additionally, the target is to create a conceptual model that could fulfill the specified requirements. The research has been carried out as a qualitative case study, in which the research data was collected from ten Finnish companies operating in manufacturing industry. The research data is formed by interviewing key personnel from the case companies. After this, the data formed from the interviews has been processed to comprise a generic set of information system requirements and the information system concept supporting it. The commercialization of the concept is studied in the thesis from the perspective of system development. The aim was to create a conceptual model, which would be economically feasible for both, a company utilizing the system and for a company developing it. For this reason, the thesis has sought ways to scale the system development effort for multiple simultaneous cases. The main methods found were to utilize platform-based thinking and a way to generalize the system requirements, or in other words abstracting the requirements of an information system. The results of the research highlight the special features Finnish manufacturing SMEs have towards PDM. The most significant of the special features is the usage of project model to manage the order-to-delivery –process. This differs significantly from the traditional concepts of Product Data Management presented in the literature. Furthermore, as a research result, this thesis presents a conceptual model of a PDM system, which would be viable for the case companies interviewed during the research. As a by-product, this research presents a synthesized model, found from the literature, to abstract information system requirements. In addition to this, the strategic importance and categorization of information systems within companies has been discussed from the perspective of information system customizations.

The current situation of small and medium-sized industrial enterprises in Trinidad & Tobago, Barbados and St. Lucia

Includes bibliography