Preparation of new glass systems by the polymeric precursor method for dental applications

Glass ionomer cements (GICs) are largely employed in Dentistry for several applications, such as luting cements for the attachment of crowns, bridges, and orthodontic brackets as well as restorative materials. The development of new glass systems is very important in Dentistry to improve of the mechanical properties and chemical stability. The aim of this study is the preparation of two glass systems containing niobium in their compositions for use as GICs. Glass systems based on the composition SiO2,Al2O3-Nb2O5-CaO were prepared by chemical route at 700degreesC. The XRD and DTA results confirmed that the prepared materials are glasses. The structures of the obtained glasses were compared to commercial material using FTIR, Al-27 and Si-29 MAS-NMR. The analysis of FTIR and MAS-NMR spectra indicated that the systems developed and commercial material are formed by SiO4 and AlO4 linked tetrahedra. These structures are essential to get the set time control and to have cements. These results encourage further applications of the experimental glasses in the formation of GICs. (C) 2004 Elsevier B.V. All rights reserved.

Inter-relação entre o perfil dos lábios superiores e a posição da maxila e dos incisivos superiores em pacientes adultos

Introduction: Professional evaluations and lay person evaluations as well do not show a clear relationship between hard tissue and soft tissue profiles in orthodontic patients. However, there are concrete evidences that the orthodontist can change the facial profile of the patients. aim: This research project aimed to measure the contribution of the bone structure of the maxilla and the upper incisors inclination to the upper lip profile. Methods: A sample of 147 adult patients, 58 male and 89 female, aged from 15 to 49 years, the most of them Caucasians, was retrospectively selected from the private practice of one of the authors. It was assumed that the esthetic facial profile depends of the hard tissues that support it besides its own features as thickness, strength and composition. The present research model was not set to control the intrinsic features of the soft tissue. To compose the Ricketts and Burstone esthetic lines, the main cephalometric variables were SNA and U1PP, when concomitantly considered. Results: The regression coefficients, although statistically significant, did not contributed expressively to explain the regard variables, the pre-defined esthetic lines. Furthermore, the results suggested a negative correlation between the maxillary position (SNA) and the anteroposterior inclination of the upper incisors (U1PP), possibly due to the compensatory action of the lips and the tongue. Conclusion: The results did not presented conclusive scientific evidences about the contribution of the hard tissues for the soft tissue facial profiles.

Hiperglicemia gestacional leve como fator de risco para síndrome metabólica na gravidez e morbilidade perinatal

Pós-graduação em Ginecologia, Obstetrícia e Mastologia - FMB

Higher Insulin Sensitivity and Impaired Insulin Secretion in Cachetic Solid Ehrlich Tumour-Bearing Mice

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Opposing Roles for Cannabinoid Receptor Type-1 (CB1) and Transient Receptor Potential Vanilloid Type-1 Channel (TRPV1) on the Modulation of Panic-Like Responses in Rats

The midbrain dorsal periaqueductal gray (dPAG) has an important role in orchestrating anxiety-and panic-related responses. Given the cellular and behavioral evidence suggesting opposite functions for cannabinoid type 1 receptor (CB1) and transient receptor potential vanilloid type-1 channel (TRPV1), we hypothesized that they could differentially influence panic-like reactions induced by electrical stimulation of the dPAG. Drugs were injected locally and the expression of CB1 and TRPV1 in this structure was assessed by immunofluorescence and confocal microscopy. The CB1-selective agonist, ACEA (0.01, 0.05 and 0.5 pmol) increased the threshold for the induction of panic-like responses solely at the intermediary dose, an effect prevented by the CB1-selective antagonist, AM251 (75 pmol). Panicolytic-like effects of ACEA at the higher dose were unmasked by pre-treatment with the TRPV1 antagonist capsazepine (0.1 nmol). Similarly to ACEA, capsazepine (1 and 10 nmol) raised the threshold for triggering panic-like reactions, an effect mimicked by another TRPV1 antagonist, SB366791 (1 nmol). Remarkably, the effects of both capsazepine and SB366791 were prevented by AM251 (75 pmol). These pharmacological data suggest that a common endogenous agonist may have opposite functions at a given synapse. Supporting this view, we observed that several neurons in the dPAG co-expressed CB1 and TRPV1. Thus, the present work provides evidence that an endogenous substance, possibly anandamide, may exert both panicolytic and panicogenic effects via its actions at CB1 receptors and TRPV1 channels, respectively. This tripartite set-point system might be exploited for the pharmacotherapy of panic attacks and anxiety-related disorders. Neuropsychopharmacology (2012) 37, 478-486; doi:10.1038/npp.2011.207; published online 21 September 2011

Heterogeneous time-dependent response of adipose tissue during the development of cancer cachexia

Cancer cachexia induces loss of fat mass that accounts for a large part of the dramatic weight loss observed both in humans and in animal models; however, the literature does not provide consistent information regarding the set point of weight loss and how the different visceral adipose tissue depots contribute to this symptom. To evaluate that, 8-week-old male Wistar rats were subcutaneously inoculated with 1 ml (2 x 10(7)) of tumour cells (Walker 256). Samples of different visceral white adipose tissue (WAT) depots were collected at days 0, 4, 7 and 14 and stored at -80 degrees C (seven to ten animals/each day per group). Mesenteric and retroperitoneal depot mass was decreased to the greatest extent on day 14 compared with day 0. Gene and protein expression of PPAR gamma(2) (PPARG) fell significantly following tumour implantation in all three adipose tissue depots while C/EBP alpha (CEBPA) and SREBP-1c (SREBF1) expression decreased over time only in epididymal and retroperitoneal depots. Decreased adipogenic gene expression and morphological disruption of visceral WAT are further supported by the dramatic reduction in mRNA and protein levels of perilipin. Classical markers of inflammation and macrophage infiltration (f4/80, CD68 and MIF-1 alpha) in WAT were significantly increased in the later stage of cachexia (although showing a incremental pattern along the course of cachexia) and presented a depot-specific regulation. These results indicate that impairment in the lipid-storing function of adipose tissue occurs at different times and that the mesenteric adipose tissue is more resistant to the 'fat-reducing effect' than the other visceral depots during cancer cachexia progression. Journal of Endocrinology (2012) 215, 363-373

Temperaturas de acionamento de condicionadores de ar e ventiladores

Este trabalho apresenta os resultados iniciais de uma pesquisa, descrevendo o comportamento de usuários de edifícios de escritórios em relação às temperaturas de acionamento de ventiladores e aparelhos condicionadores de ar. Medições foram realizadas em quatro salas administrativas do Instituto de Arquitetura e Urbanismo de São Carlos – IAU/USP, nas quais foram registradas as temperaturas internas do ar e o momento de acionamento dos referidos equipamentos. Os valores registrados foram comparados à temperatura externa e à faixa de temperaturas de conforto descrita pela norma ASHRAE 55/2004. As temperaturas registradas de acionamento dos aparelhos condicionadores de ar e ventiladores são similares e estão dentro da faixa considerada confortável pela referida norma.

Preparation and characterisation of refractory whiskers and selected alumina composites

A whisker is a common name of single crystalline inorganic fibre of small dimensions, typically 0.5-1 μm in diameter and 20-50 μm in length. Whiskers are mainly used as reinforcement of ceramics. This work describes the synthesis and characterisation of new whisker types. Ti0.33Ta0.33Nb0.33CxN1-x, TiB2, B4C, and LaxCe1-xB6 have been prepared by carbothermal vapour–liquid–solid (CTR-VLS) growth mechanisms in the temperature range 900-1800°C, in argon or nitrogen. Generally, carbon and different suitable oxides were used as whisker precursors. The oxides reacted via a carbothermal reduction process. A halogenide salt was added to form gaseous metal halogenides or oxohalogenides and small amount of a transition metal was added to catalyse the whisker growth. In this mechanism, the whisker constituents are dissolved into the catalyst, in liquid phase, which becomes supersaturated. Then a whisker could nucleate and grow out under continuous feed of constituents. The syntheses of TiC, TiB2, and B4C were followed at ordinary synthesis conditions by means of mass spectrometry (MS), thermogravimetry (TG), differential thermal analysis (DTA) and quenching. The main reaction starting temperatures and reaction time for the different mixtures was revealed, and it was found that the temperature inside the crucible during the reactions was up to 100°C below the furnace set-point, due to endothermic nature of the reactions. Quench experiments showed that whiskers were formed already when reaching the temperature plateau, but the yield increased fast with the holding time and reached a maximum after about 20-30 minutes. Growth models for whisker formation have been proposed. Alumina based composites reinforced by (2-5 vol.%) TiCnano and TiNnano and 25 vol.% of carbide, and boride phases (whiskers and particulates of TiC, TiN, TaC, NbC, (Ti,Ta)C, (Ti,Ta,Nb)C, SiC, TiB2 and B4C) have been prepared by a developed aqueous colloidal processing route followed by hot pressing for 90 min at 1700°C, 28 MPa or SPS sintering for 5 minutes at 1200-1600°C and 75 MPa. Vickers indentation measurements showed that the lowest possible sintering temperature is to prefer from mechanical properties point of view. In the TiNnano composites the fracture mode was typically intergranular, while it was transgranular in the SiCnano composites. The whisker and particulate composites have been compared in terms of e.g. microstructure and mechanical properties. Generally, additions of whiskers yielded higher fracture toughness compared to particulates. Composites of commercially available SiC whiskers showed best mechanical properties with a low spread but all the other whisker phases, especially TiB2, exhibited a great potential as reinforcement materials.

User centered retrofit: The case of kadk campus, Copenhagen, (dk)

The following research thesis is about a retrofit project made in Denmark, Copenhagen, and carried out on one of the buildings belonging to the Royal Danish Academy. The key assumption and base of the entire research process is that, up to now, the standard procedure in retrofit cases like this provides as comparative method between de facto and design, the use of Energy Simulation software. These programs generally divide the space into different thermal zones, assigning to each of them different levels of employment, activities, set-point temperatures set for cooling and heating analysis and so on, but always providing average and constant values, usually taken in the middle point of the single thermal zone. Therefore, the project and its research path stems from the attempt to investigate the potentialities of this kind of designing for retrofit process, as previously anticipated not antithetical but complementary to that classic energy-based retrofit, thus passing from the building scale, and all its thermal zones, to the users' scale, related to humans and microclimates. The main software used in this process is Autodesk Simulation CFD. The idea behind the project is that in certain situations, for example, it will not be necessary to add throughout insulation layers (previously parameterized and optimized with Design Builder), and that even in Winter conditions, due maybe to the users' activities, the increased level of clothing (clo) and the heat produced by equipments, thermal comfort could be achieved also in areas characterized by considerably lower MRT. After the analysis of the State of Art and its simulations, the project has still been supported by the tool itself, the CFD Software, in an iterative process aimed at achieving visible improvements in terms of MRT, on spaces with different needs and characteristics, both in Winter and Summer regimes.

Face Lift Surgery for Reconstructed Virtual Humans

We introduce an innovative, semi-automatic method to transform low resolution facial meshes into high definition ones, based on the tailoring of a generic, neutral human head model, designed by an artist, to fit the facial features of a specific person. To determine these facial features we need to select a set of "control points" (corners of eyes, lips, etc.) in at least two photographs of the subject's face. The neutral head mesh is then automatically reshaped according to the relation between the control points in the original subject's mesh through a set of transformation pyramids. The last step consists in merging both meshes and filling the gaps that appear in the previous process. This algorithm avoids the use of expensive and complicated technologies to obtain depth maps, which also need to be meshed later.

On the leakage-power modeling for optimal server operation

Leakage power consumption is a com- ponent of the total power consumption in data cen- ters that is not traditionally considered in the set- point temperature of the room. However, the effect of this power component, increased with temperature, can determine the savings associated with the careful management of the cooling system, as well as the re- liability of the system. The work presented in this paper detects the need of addressing leakage power in order to achieve substantial savings in the energy consumption of servers. In particular, our work shows that, by a careful detection and management of two working regions (low and high impact of thermal- dependent leakage), energy consumption of the data- center can be optimized by a reduction of the cooling budget.

Grasshopper crop and midgut extract effects on plants: an example of reward feedback.

Acid extracts and a resultant fraction from solid-phase extraction (SPE) of Romalea guttata crop and midgut tissues induce sorghum (Sorghum bicolor var. Rio) coleoptile growth in 24-h incubations an average of 49% above untreated controls. When combined with plant auxin, indole-3-acetic acid (IAA), the SPE fraction shows a synergistic reaction, yielding increases in coleoptile growth that average 295% above untreated controls and 8% above IAA standards. The interaction lowered the point of maximum sensitivity of IAA 3 orders of magnitude, resulting in a new IAA physiological set point at 10(-7) g/ml. This synergism suggests that contents in animal regurgitants making their way into plant tissue during feeding may produce a positive feedback in plant growth and development following herbivory. Such a process, also known as reward feedback, may exert major controls on ecosystem-level relationships in nature.

Practicality of time-optimal two-qubit Hamiltonian simulation

What is the time-optimal way of using a set of control Hamiltonians to obtain a desired interaction? Vidal, Hammerer, and Cirac [Phys. Rev. Lett. 88, 237902 (2002)] have obtained a set of powerful results characterizing the time-optimal simulation of a two-qubit quantum gate using a fixed interaction Hamiltonian and fast local control over the individual qubits. How practically useful are these results? We prove that there are two-qubit Hamiltonians such that time-optimal simulation requires infinitely many steps of evolution, each infinitesimally small, and thus is physically impractical. A procedure is given to determine which two-qubit Hamiltonians have this property, and we show that almost all Hamiltonians do. Finally, we determine some bounds on the penalty that must be paid in the simulation time if the number of steps is fixed at a finite number, and show that the cost in simulation time is not too great.

Typical medullary breast carcinomas have a basal/myoepithelial phenotype

Medullary breast cancer (MBC) is a rare, diagnostically difficult, pathological subtype. Despite being high grade, it has a good prognosis. MBC patients have an excess of BRCA1 germ-fine mutation and reliable identification of MBC could help to identify patients at risk of carrying germline BRCA1 mutations or in whom chemotherapy could be avoided. The aim of this study was therefore to improve diagnosis by establishing an MBC protein expression profile using immunohistochemistry (IHC) on tissue-microarrays (TMA). Using a series of 779 breast carcinomas ('EC' set), diagnosed initially as MBC, a double-reading session was carried out by several pathologists on all of the histological material to establish the diagnosis as firmly as possible using a 'medullary score'. Only MBCs with high scores, i.e. typical MBC (TMBC) (n = 44) and non-TMBC grade III with no or low scores (n = 160), were included in the IHC study. To validate the results obtained on this first set, a control series of TMBC (n = 17) and non-MBC grade III cases (n = 140) ('IPC' set) was studied. The expression of 18 proteins was studied in the 61 TMBCs and 300 grade III cases from the two sets. The global intra-observer concordance of the first reading for the diagnosis of TMBC was 94%, with almost perfect kappa (kappa) of 0.815. TMBC was characterized by a high degree of basal/myoepithelial differentiation. In multivariate analysis with logistic regression, TMBC was defined by the association of P-cadherin (R = 2.29), MIB1 > 50 (R = 3.80), ERBB2 negativity (R = 2.24) and p53 positivity (RR = 1.45). Copyright (c) 2005 Pathological Society of Great Britain and Ireland. Published by John Wiley & Sons, Ltd.

A methodology for evaluating and selecting processes for natural gas conditioning

The aim of this work was to develop a generic methodology for evaluating and selecting, at the conceptual design phase of a project, the best process technology for Natural Gas conditioning. A generic approach would be simple and require less time and would give a better understanding of why one process is to be preferred over another. This will lead to a better understanding of the problem. Such a methodology would be useful in evaluating existing, novel and hybrid technologies. However, to date no information is available in the published literature on such a generic approach to gas processing. It is believed that the generic methodology presented here is the first available for choosing the best or cheapest method of separation for natural gas dew-point control. Process cost data are derived from evaluations carried out by the vendors. These evaluations are then modelled using a steady-state simulation package. From the results of the modelling the cost data received are correlated and defined with respect to the design or sizing parameters. This allows comparisons between different process systems to be made in terms of the overall process. The generic methodology is based on the concept of a Comparative Separation Cost. This takes into account the efficiency of each process, the value of its products, and the associated costs. To illustrate the general applicability of the methodology, three different cases suggested by BP Exploration are evaluated. This work has shown that it is possible to identify the most competitive process operations at the conceptual design phase and illustrate why one process has an advantage over another. Furthermore, the same methodology has been used to identify and evaluate hybrid processes. It has been determined here that in some cases they offer substantial advantages over the separate process techniques.