Postharvest changes and respiratory pattern of bacuri fruit (Platonia insignis Mart.) at different maturity stages during ambient storage

Bacuri (Platonia insignis, Mart.) is one of the most important among Amazonian fruits. However, little is known about its postharvest physiology, such as maturity stages, changes during ambient storage, and respiratory pattern. Fruits were harvested at three maturity stages based on epicarp colour: dark green, light green, and turning (50% yellow), in order to determine colour modification and respiratory pattern during ambient storage (25.2 ºC, 75.1 % RH). Fruit of all maturity stages showed, after three days of harvest, a non-climacteric respiratory pattern, with turning fruit presenting the highest CO2 production rate until the fourth storage day (177.63 mg.CO2.kg-1.h-1). Yellowing increased throughout storage as related to lightness, chromaticity, and hue angle reductions. Turning fruit can be stored at ambient conditions for up to 10 days without any loss in marketability.

Geographic pattern of genetic diversity in natural populations of Rosewood (Aniba rosaeodora), in the Central Amazonia

Rosewood (Aniba rosaeodora Ducke, Lauraceae) is an Amazonian evergreen tree and a source of the purest linalool, the main component of its essential oil, which is very valuable in the international perfumery market. After decades of over-exploitation it is currently considered as threatened. We evaluated the genetic diversity and its distribution in four populations in Central Amazonia. Thirty-five reliable RAPD markers were generated, of which 32 were polymorphic (91.4%). Variation was higher within the populations (76.5%; p < 0.0001) and geographic distribution contributed to population differentiation (23.4%; p < 0.0001). The Amazon River had a small influence on gene flow (3.3%; p < 0.0001), but we identified evidence of gene flow across the river. There were significant differences in marker frequencies (p < 0.05), in agreement with the low gene flow (Nm = 2.02). The correlation between genetic distance and gene flow was - 0.95 (p = 0.06) and between geographic distance and gene flow was -0.78 (p = 0.12). There was a geographic cline of variability across an East-West axis, influenced as well by the Amazon River, suggesting the river could be a barrier to gene flow. Although threatened, these Rosewood populations retain high diversity, with the highest levels in the Manaus population, which has been protected for over 42 years in a Reserve.

Synthesis, antiangiogenesis evaluation and molecular docking studies of 1-Aryl-3-[(thieno[3,2-b]pyridin-7-ylthio)phenyl]ureas: Discovery of a new substitution pattern for type II VEGFR-2 Tyr kinase inhibitors

The synthesis and biological evaluation of novel 1-aryl-3-[2-, 3- or 4-(thieno[3,2-b]pyridin-7-ylthio)phenyl]ureas 3, 4 and 5 as VEGFR-2 tyrosine kinase inhibitors, are reported. The 1-aryl-3-[3-(thieno[3,2-b]pyridin-7-ylthio)phenyl]ureas 4a-4h, with the arylurea in the meta position to the thioether, showed the lowest IC50 values in enzymatic assays (10-206 nM), the most potent compounds 4d-4h (IC50 10-28 nM) bearing hydrophobic groups (Me, F, CF3 and Cl) in the terminal phenyl ring. A convincing rationalization was achieved for the highest potent compounds 4 as type II VEGFR-2 inhibitors, based on the simultaneous presence of: (1) the thioether linker and (2) the arylurea moiety in the meta position. For compounds 4, significant inhibition of Human Umbilical Vein Endothelial Cells (HUVECs) proliferation (BrdU assay), migration (wound-healing assay) and tube formation were observed at low concentrations. These compounds have also shown to increase apoptosis using the TUNEL assay. Immunostaining for total and phosphorylated (active) VEGFR-2 was performed by Western blotting. The phosphorylation of the receptor was significantly inhibited at 1.0 and 2.5 microM for the most promising compounds. Altogether, these findings point to an antiangiogenic effect in HUVECs.

Myocardial perfusion by contrast echocardiography. Establishment of normal pattern of intracoronary injection and safety in humans

OBJECTIVE: To establish the normal pattern and safety of echocardiographic contrast in patients with no significant obstruction of epicardial coronary arteries. METHODS: 67 patients with normal coronary arteries or obstructions < 50% were selected from 277 patients who underwent coronary angiography (CA). Mean age was 56 ± 11years and 36 were males. At the end CA, echocardiographic contrast was selectively injected into each coronary artery. The parasternal short axis of the left ventricle (LV) was divided into six segments: anterior (A), antero-lateral (AL), postero-lateral (PL), posterior (P), infero-septal (IS) and antero-septal (AS). Anterolateral (ALPM) and posteromedial papillary muscles (PMPM) were also considered. The pattern and intensity of the appearance of the myocardial contrast was visually analyzed. RESULTS: The right coronary artery (RCA) was dominant in 60 patients. Contrast appearance was sudden and simultaneous in the 3 muscle layers. All segments could be contrasted after the injection in both coronary arteries. 100% of the AS, A and AL segments, 97% of the PL and 98% of the ALPM were perfused by the left coronary artery (LCA). P and IS segments were perfused by the RCA in 85% and 82%, respectively, and by a dominant LCA in 71% of the cases. The PMPM was perfused by a dominant RCA in 77% and by a dominant LCA in 86%. There were no symptoms. CONCLUSION: Intracoronary injection of the sonicated solution is a safe procedure that allows for an excellent opacification of the myocardium and can potentially be used during routine CA.

Hypertension in a female nursing staff-pattern of occurrence, diagnosis, and treatment

OBJECTIVE: To report the pattern of occurrence, diagnosis, and treatment of hypertension in a female nursing staff of an emergency hospital. METHODS: We carried out a cross-sectional study that included interviews and blood pressure measurements of 494 nursing professionals at an emergency hospital in the city of Salvador, in the state of Bahia, Brazil. We considered hypertensive all individual with blood pressure > or = 140/90 mmHg or normal pressure if on regular treatment. RESULTS: We found a prevalence of hypertension of 36.4%. Only 18.3% of the individuals ignored their hypertensive condition, and 64.2% admitted not being having regular treatment. Of those individuals who were having treatment, 69.4% had elevated blood pressure on examination. The major reasons for not being on treatment was the occasional elevation of blood pressure (22.2%) and medical counseling (20.0%). CONCLUSION: The results point to the need to introduce hypertension control measures in this occupational group, because of the magnitude of the disease and the potential impact on diffusion of knowledge and measures to control hypertension.

An investigation into the temperature distribution resulting from cutting of compact bone using a reciprocating bone saw

Surgical procedures such as osteotomy and hip replacement involve the cutting of bone with the aid of various manual and powered cutting instruments including manual and powered bone saws. The basic mechanics of bone sawing processes are consistent with most other material sawing processes such as for wood or metal. Frictional rubbing between the blade of the saw and the bone results in the generation of localised heating of the cut bone. Research studies have been carried out which consider the design of the bone saw which deals with specifics of the saw teeth geometry and research which examines the effect of drilling operations on heating of the bone has shown that elevated temperatures will occur from frictional overheating. This overheating in localised areas is known to have an impact on the rate of healing of the bone post operation and the sharpness life of the blade. The purpose of this study was to measure the temperature at three zones at fixed intervals of 3mm, 6mm, and 9mm away from the cutting zone. It should be noted that it was the first time that this measurement technique was used to measure the temperature gradient through the bone specimen thereby establishing the extent to which clinicians are experiencing thermal injury during sawing of bone while using a reciprocating saw. The effect of various cutting feed rate on temperature elevation was also investigated in this research. The results showed that there will be a region of bone at least 9mm either side of the cutting blade experiencing thermal injury as temperatures in this region exceeded the threshold temperature of 44°C for necrosis (cell death).

Development of a semi-automatic self learning pattern recognition system for the control of electronic boards

This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway - Mayo Institute of Technology and an industrial company, Tyco/Mallinckrodt Galway. The project aimed to develop a semi - automatic, self - learning pattern recognition system capable of detecting defects on the printed circuits boards such as component vacancy, component misalignment, component orientation, component error, and component weld. The research was conducted in three directions: image acquisition, image filtering/recognition and software development. Image acquisition studied the process of forming and digitizing images and some fundamental aspects regarding the human visual perception. The importance of choosing the right camera and illumination system for a certain type of problem has been highlighted. Probably the most important step towards image recognition is image filtering, The filters are used to correct and enhance images in order to prepare them for recognition. Convolution, histogram equalisation, filters based on Boolean mathematics, noise reduction, edge detection, geometrical filters, cross-correlation filters and image compression are some examples of the filters that have been studied and successfully implemented in the software application. The software application developed during the research is customized in order to meet the requirements of the industrial partner. The application is able to analyze pictures, perform the filtering, build libraries, process images and generate log files. It incorporates most of the filters studied and together with the illumination system and the camera it provides a fully integrated framework able to analyze defects on printed circuit boards.

SQL based frequent pattern mining

Data mining, frequent pattern mining, database mining, mining algorithms in SQL

Advancing the understanding of brain function with multivariate pattern analysis

Magdeburg, Univ., Fak. für Naturwiss., Diss., 2009

Statistical pattern recognition for audio-forensics : empirical investigations on the application scenarios audio steganalysis and microphone forensics

Magdeburg, Univ., Fak. für Informatik, Diss., 2013

Citation-based Plagiarism Detection : applying citation pattern analysis to identify currently non-machine-detectible disguised plagiarism in scientific publications

Magdeburg, Univ., Fak. für Informatik, Diss., 2013

Spatio-temporal pattern formation in microemulsions under different physical and chemical conditions

Otto-von-Guericke-Universität Magdeburg, Fakultät für Naturwissenschaften, Dissertation, 2016

Microhabitats de mosquitos (Diptera, Culicidae) em internódios de taquara na Mata Atlântica, Paraná, Brasil

During two consecutive years, from January 1985 to December 1986, a comparative study of mosquitoes preferences for breeding habitat was carried out in the Atlantic Forest of the Serra do Mar, Paraná State, Brazil. To achieve it, 1875 bamboo internodes aligned vertically in live green, bamboo plants Merostachys speciosa Munro and Merostachys sp. were used, in which metabolic water was exuded from the plant itself, and presenting different size/pattern holes at their lateral walls, bored by the local sylvan fauna. Another group of 1200 individual internode traps was used as comparative element, carved out with a transversal cut by a saw, filled with local stream water and held in branches at different heights in the vegetal strata nearby. At both microhabitat types, a total of 17 culicid species was registered. Culex (Microculex) neglectus Lutz, 1904, Cx. (Carrollia) soperi Antunes & Lane, 1937, Sabethes (Sabethes) batesi Lane & Cerqueira, 1942 and Sa. (Sabethinus) melanonymphe (Dyar, 1924)colonized exclusively live plant internodes, while Culex (Microculex) elongatus Rozeboom & Lane, 1950, Cx. (Carrollia) iridescens (Lutz, 1905), Cx. (Carrollia) kompi Valencia,1973and Trichoprosopon (Trichoprosopon) soaresi Dyar & Knab, 1907 bred only in internode traps. The remaining nine species colonized both habitats indistinctly. Quantitatively, was detected the abundance of 60.1% at live green internodes, against 39.9% for internode traps. Concerning the different patterns of bored live internode holes, 40.3% of the total computed specimens were collected in square or rectangular holes, 31.9% in two hole internodes, one minute circular, the other wider, and the remaining 28.8% of specimens distributed in other pattern type internodes. The mosquitoes breeding at these microhabitats fall in the culicid entomofauna specialized at locating and detecting peculiar and propitious mesogen conditions for breeding purposes.

Ontogenetic variation of plastral spotting pattern in Phrynops hilarii (Testudines, Chelidae)

The plastral spotting variation in the chelid turtle Phrynops hilarii (Duméril & Bibron, 1835) in relation to sex, size, and geographic procedence of individuals was analyzed. States for qualitative characters were analyzed using non-parametric tests. Quantitative characters (shell and scute measurements) were standardized for body size by linear regression against carapace length, and were subjected to principal components analysis and canonical discriminant function analysis. Results suggest that increased plastral spotting is a polymorphic ontogenetic trait in P. hilarii. Neither hatchlings nor juveniles have plastral pattern moderately or heavily pigmented. The simplest pattern, however, may persist without changes in some adults. There are no differences between sexes. The spatial distribution of the plastral pattern is not ordered latitudinally or longitudinally, showing no relationship with gradients of elevation, temperature, or precipitation. This pattern trait lacks of taxonomic significance. The morphometric analysis failed to reveal any character of diagnostic utility in the plastron to support the possibility that these patterns correspond to different sympatric taxa.

The influence of shell species and size on the shell selection pattern of Paguristes tortugae (Decapoda, Diogenidae) from Anchieta Island (Ubatuba, Brazil)

Shell selection by the hermit crab Paguristes tortugae Schmitt, 1933 from Anchieta Island (Brazil) was analyzed using the six most frequently occupied shell species in the field and taking into account the sexual condition of the individuals, the shell size and the shell species. The experiments were conducted under laboratory conditions and the shell species preference was estimated on the basis of the frequency that each species was chosen by the individuals. The preferred shell species and size were determined by regression analysis. The highest correlation coefficients were obtained for the relations between the hermit dimensions and shell dry weight. The ovigerous females preferred shells with larger internal volume: Leucozonia nassa (Gmelin, 1791) and Cerithium atratum (Born, 1778). In the experiment of shell size, males preferred heavier shells whereas females selected the shape characteristics of the shell, such as the aperture and the internal volume, which are probably related to the growth and offspring guarantee, respectively. In general, and independent of sex condition, P. tortugae showed significant selection among all shells utilized. The results suggest that shell selection by P. tortugae involves sexual and reproductive condition preferences.