Genetic associations between flight speed and growth traits in Nellore cattle

The aim of the present study was to estimate genetic parameters for flight speed and its association with growth traits in Nellore beef cattle. The flight speed (FS) of 7,402 yearling animals was measured, using a device composed of a pair of photoelectric cells. Time interval data (s) were converted to speed (m/s) and faster animals were regarded as more reactive. The growth traits analyzed were weaning weight (WW), ADG from weaning to yearling age, and yearling scrotal circumference (SC). The (co)variance components were estimated using REML in a multitrait analysis applying an animal model. The model included random direct additive genetic and residual effects, fixed effects of contemporary groups, age of dam (classes), and age of animal as covariable. For WW, the model also included maternal genetic and permanent environmental random effects. The direct heritability estimate for FS was 0.26 +/- 0.05 and direct heritability estimates for WW, SC, and ADG were 0.30 +/- 0.01, 0.48 +/- 0.02, and 0.19 +/- 0.01, respectively. Estimates of the genetic correlation between FS and the growth traits were -0.12 +/- 0.07 (WW), -0.13 +/- 0.08 (ADG), and -0.11 +/- 0.07 (SC). Although the values were low, these correlations showed that animals with better temperaments (slower FS) tended to present better performance. It is possible to infer that long-term selection for weight and scrotal circumference can promote a positive genetic response in the temperament of animals. Nevertheless, to obtain faster genetic progress in temperament, it would be necessary to perform direct selection for such trait. Flight speed is an easily measured indicator of temperament and can be included as a selection criterion in breeding programs for Nellore cattle.

The effect of 3 versus 6 years of zoledronic acid treatment of osteoporosis: a randomized extension to the HORIZON-Pivotal Fracture Trial (PFT)

Zoledronic acid 5 mg (ZOL) annually for 3 years reduces fracture risk in postmenopausal women with osteoporosis. To investigate long-term effects of ZOL on bone mineral density (BMD) and fracture risk, the Health Outcomes and Reduced Incidence with Zoledronic acid Once Yearly-Pivotal Fracture Trial (HORIZON-PFT) was extended to 6 years. In this international, multicenter, double-blind, placebo-controlled extension trial, 1233 postmenopausal women who received ZOL for 3 years in the core study were randomized to 3 additional years of ZOL (Z6, n = 616) or placebo (Z3P3, n = 617). The primary endpoint was femoral neck (FN) BMD percentage change from year 3 to 6 in the intent-to-treat (ITT) population. Secondary endpoints included other BMD sites, fractures, biochemical bone turnover markers, and safety. In years 3 to 6, FN-BMD remained constant in Z6 and dropped slightly in Z3P3 (between-treatment difference = 1.04%; 95% confidence interval 0.4 to 1.7; p = 0.0009) but remained above pretreatment levels. Other BMD sites showed similar differences. Biochemical markers remained constant in Z6 but rose slightly in Z3P3, remaining well below pretreatment levels in both. New morphometric vertebral fractures were lower in the Z6 (n = 14) versus Z3P3 (n = 30) group (odds ratio = 0.51; p = 0.035), whereas other fractures were not different. Significantly more Z6 patients had a transient increase in serum creatinine >0.5 mg/dL (0.65% versus 2.94% in Z3P3). Nonsignificant increases in Z6 of atrial fibrillation serious adverse events (2.0% versus 1.1% in Z3P3; p = 0.26) and stroke (3.1% versus 1.5% in Z3P3; p = 0.06) were seen. Postdose symptoms were similar in both groups. Reports of hypertension were significantly lower in Z6 versus Z3P3 (7.8% versus 15.1%, p < 0.001). Small differences in bone density and markers in those who continued versus those who stopped treatment suggest residual effects, and therefore, after 3 years of annual ZOL, many patients may discontinue therapy up to 3 years. However, vertebral fracture reductions suggest that those at high fracture risk, particularly vertebral fracture, may benefit by continued treatment.

DEVELOPMENT OF A PREDICTIVE COMBUSTION MODEL OF A SPARK IGNITED ENGINE WITH GASOLINE DIRECT INJECTION, VARIABLE VALVE TIMING, DURATION AND LIFT TECHNOLOGIES

There is a need by engine manufactures for computationally efficient and accurate predictive combustion modeling tools for integration in engine simulation software for the assessment of combustion system hardware designs and early development of engine calibrations. This thesis discusses the process for the development and validation of a combustion modeling tool for Gasoline Direct Injected Spark Ignited Engine with variable valve timing, lift and duration valvetrain hardware from experimental data. Data was correlated and regressed from accepted methods for calculating the turbulent flow and flame propagation characteristics for an internal combustion engine. A non-linear regression modeling method was utilized to develop a combustion model to determine the fuel mass burn rate at multiple points during the combustion process. The computational fluid dynamic software Converge ©, was used to simulate and correlate the 3-D combustion system, port and piston geometry to the turbulent flow development within the cylinder to properly predict the experimental data turbulent flow parameters through the intake, compression and expansion processes. The engine simulation software GT-Power © is then used to determine the 1-D flow characteristics of the engine hardware being tested to correlate the regressed combustion modeling tool to experimental data to determine accuracy. The results of the combustion modeling tool show accurate trends capturing the combustion sensitivities to turbulent flow, thermodynamic and internal residual effects with changes in intake and exhaust valve timing, lift and duration.

Incorporação de informações genômicas no desenvolvimento de índices econômicos para a seleção de bovinos leiteiros

A eficiência econômica da bovinocultura leiteira está relacionada à utilização de animais que apresentem, concomitantemente, bom desempenho quanto à produção, reprodução, saúde e longevidade. Nisto, o índice de seleção configura-se como ferramenta importante ao aumento da lucratividade nesse sistema, visto que permite a seleção de reprodutores para várias características simultaneamente, considerando a relação entre elas bem como a relevância econômica das mesmas. Com a recente disponibilidade de dados genômicos tornou-se ainda possível expandir a abrangência e acurácia dos índices de seleção por meio do aumento do número e qualidade das informações consideradas. Nesse contexto, dois estudos foram desenvolvidos. No primeiro, o objetivo foi estimar parâmetros genéticos e valores genéticos (VG) para características relacionadas à produção e qualidade do leite incluindo-se a informação genômica na avaliação genética. Foram utilizadas medidas de idade ao primeiro parto (IPP), produção de leite (PROD), teor de gordura (GOR), proteína (PROT), lactose, caseína, escore de células somáticas (ECS) e perfil de ácidos graxos de 4.218 vacas bem como os genótipos de 755 vacas para 57.368 polimorfismos de nucleotídeo único (SNP). Os componentes de variância e VG foram obtidos por meio de um modelo misto animal, incluindo-se os efeitos de grupos de contemporâneas, ordem de lactação, dias em lactação e os efeitos aditivo genético, ambiente permanente e residual. Duas abordagens foram desenvolvidas: uma tradicional, na qual a matriz de relacionamentos é baseada no pedigree; e uma genômica, na qual esta matriz é construída combinando-se a informação de pedigree e dos SNP. As herdabilidades variaram de 0,07 a 0,39. As correlações genéticas entre PROD e os componentes do leite variaram entre -0,45 e -0,13 enquanto correlações altas e positivas foram estimadas entre GOR e os ácidos graxos. O uso da abordagem genômica não alterou as estimativas de parâmetros genéticos; contudo, houve aumento entre 1,5% e 6,8% na acurácia dos VG, à exceção de IPP, para a qual houve uma redução de 1,9%. No segundo estudo, o objetivo foi incorporar a informação genômica no desenvolvimento de índices econômicos de seleção. Neste, os VG para PROD, GOR, PROT, teor de ácidos graxos insaturados (INSAT), ECS e vida produtiva foram combinados em índices de seleção ponderados por valores econômicos estimados sob três cenários de pagamento: exclusivamente por volume de leite (PAG1); por volume e por componentes do leite (PAG2); por volume e componentes do leite incluindo INSAT (PAG3). Esses VG foram preditos a partir de fenótipos de 4.293 vacas e genótipos de 755 animais em um modelo multi-característica sob as abordagens tradicional e genômica. O uso da informação genômica influenciou os componentes de variância, VG e a resposta à seleção. Entretanto, as correlações de ranking entre as abordagens foram altas nos três cenários, com valores entre 0,91 e 0,99. Diferenças foram principalmente observadas entre PAG1 e os demais cenários, com correlações entre 0,67 e 0,88. A importância relativa das características e o perfil dos melhores animais foram sensíveis ao cenário de remuneração considerado. Assim, verificou-se como essencial a consideração dos valores econômicos das características na avaliação genética e decisões de seleção.

Examining the Relationship Between Secondary Traumatic Stress and Sickness Absenteeism within 9-1-1 Emergency Call Centers

Thesis (Master's)--University of Washington, 2016-06

School desegregation in Broward County, Florida, 1970--1998: A historical study of power

This is a historical case study on school desegregation and power in Broward County, Florida from 1970 to 1998. The purpose of this study is to describe, explain and analyze types of power used by the School Board of Broward County, Florida and community activists, in their efforts to influence desegregation decisions from 1970 to 1998. In addition, this study explains who benefited and who won from the School Board's desegregation decisions and who governed those decisions? ^ A historical case study approach was used as the method for conducting this study. Data sources included 11 interviews of individuals who were involved in school desegregation issues as either School Board officials or community activists and 10 archival data sources. ^ The theoretical models of Russell, Galbraith, Wartenberg and Domhoff were used to determine the different types of power techniques used by School Board officials and community activists and to answer the questions: who benefited and who won from the School Board's desegregation decisions and who governed those policies and practices? ^ The primary beneficiaries of school desegregation policies and practices in Broward County were: white, affluent communities and the builders, developers, realtors and other businesses in the western suburban communities. All of the data sources indicated that the black community did not benefit from the School Board's desegregation policies. ^ The primary power techniques used by School Board officials to influence desegregation policies and practices was “power over opinions” and compensation. These power techniques were manifested by the School Board publicly disputing the allegations raised by community activists and by compensating those who supported and promoted the School Board's desegregation policies and practices. ^ The power techniques primarily used by community activists were coercive force and “power over opinions.” They effectively used these power techniques to change the School Board's policies and practices they felt were detrimental to black children and the black community. ^ Based on the analysis of the qualitative data, it can be concluded that black children did not benefit from school desegregation in Broward County, Florida and the community continues to suffer residual effects from past desegregation policies and practices. ^

School desegregation in Broward County, Florida 1970-1998 : a historical study of power

This is a historical case study on school desegregation and power in Broward County, Florida from 1970 to 1998. The purpose of this study is to describe, explain and analyze types of power used by the School Board of Broward County, Florida and community activists, in their efforts to influence desegregation decisions from 1970 to 1998. In addition, this study explains who benefited and who won from the School Board's desegregation decisions and who governed those decisions? A historical case study approach was used as the method for conducting this study. Data sources included 11 interviews of individuals who were involved in school desegregation issues as either School Board officials or community activists and 10 archival data sources. The theoretical models of Russell, Galbraith, Wartenberg and Domhoff were used to determine the different types of power techniques used by School Board officials and community activists and to answer the questions: who benefited and who won from the School Board's desegregation decisions and who governed those policies and practices? The primary beneficiaries of school desegregation policies and practices in Broward County were: white, affluent communities and the builders, developers, realtors and other businesses in the western suburban communities. All of the data sources indicated that the black community did not benefit from the School Board's desegregation policies. The primary power techniques used by School Board officials to influence desegregation policies and practices was "power over opinions" and compensation. These power techniques were manifested by the School Board publicly disputing the allegations raised by community activists and by compensating those who supported and promoted the School Board's desegregation policies and practices. The power techniques primarily used by community activists were coercive force and "power over opinions." They effectively used these power techniques to change the School Board's policies and practices they felt were detrimental to black children and the black community. Based on the analysis of the qualitative data, it can be concluded that black children did not benefit from school desegregation in Broward County, Florida and the community continues to suffer residual effects from past desegregation policies and practices.

Genetic parameters for carcass traits and body weight using a Bayesian approach in the Canchim cattle.

Correlation between genetic parameters and factors such as backfat thickness (BFT), rib eye area (REA), and body weight (BW) were estimated for Canchim beef cattle raised in natural pastures of Brazil. Data from 1648 animals were analyzed using multi-trait (BFT, REA, and BW) animal models by the Bayesian approach. This model included the effects of contemporary group, age, and individual heterozygosity as covariates. In addition, direct additive genetic and random residual effects were also analyzed. Heritability estimated for BFT (0.16), REA (0.50), and BW (0.44) indicated their potential for genetic improvements and response to selection processes. Furthermore, genetic correlations between BW and the remaining traits were high (P > 0.50), suggesting that selection for BW could improve REA and BFT. On the other hand, genetic correlation between BFT and REA was low (P = 0.39 ± 0.17), and included considerable variations, suggesting that these traits can be jointly included as selection criteria without influencing each other. We found that REA and BFT responded to the selection processes, as measured by ultrasound. Therefore, selection for yearling weight results in changes in REA and BFT.

Effects of mechanical properties, residual stress and indenter tip geometry on instrumented indentation data in thin films

In this work, an axisymmetric two-dimensional finite element model was developed to simulate instrumented indentation testing of thin ceramic films deposited onto hard steel substrates. The level of film residual stress (sigma(r)), the film elastic modulus (E) and the film work hardening exponent (n) were varied to analyze their effects on indentation data. These numerical results were used to analyze experimental data that were obtained with titanium nitride coated specimens, in which the substrate bias applied during deposition was modified to obtain films with different levels of sigma(r). Good qualitative correlation was obtained when numerical and experimental results were compared, as long as all film properties are considered in the analyses, and not only sigma(r). The numerical analyses were also used to further understand the effect of sigma(r) on the mechanical properties calculated based on instrumented indentation data. In this case, the hardness values obtained based on real or calculated contact areas are similar only when sink-in occurs, i.e. with high n or high ratio VIE, where Y is the yield strength of the film. In an additional analysis, four ratios (R/h(max)) between indenter tip radius and maximum penetration depth were simulated to analyze the combined effects of R and sigma(r) on the indentation load-displacement curves. In this case, or did not significantly affect the load curve exponent, which was affected only by the indenter tip radius. On the other hand, the proportional curvature coefficient was significantly affected by sigma(r) and n. (C) 2010 Elsevier B.V. All rights reserved.

Effects of Residual Oil Fly Ash (ROFA) in Mice with Chronic Allergic Pulmonary Inflammation

transition metals, which are involved in the pathological effects of PM. The objective of this study was to investigate the effects of intranasal administration of ROFA on pulmonary inflammation, pulmonary responsiveness, and excess mucus production in a mouse model of chronic pulmonary allergic inflammation. BALB/c mice received intraperitoneal injections of ovalbumin (OVA) solution (days 1 and 14). OVA challenges were performed on days 22, 24, 26, and 28. After the challenge, mice were intranasally instilled with ROFA. After forty-eight hours, pulmonary responsiveness was performed. Mice were sacrificed, and lungs were removed for morphometric analysis. OVA-exposed mice presented eosinophilia in the bronchovascular space (p < .001), increased pulmonary responsiveness (p < .001), and epithelial remodeling (p = .003). ROFA instillation increased pulmonary responsiveness (p = .004) and decreased the area of ciliated cells in the airway epithelium (p = .006). The combined ROFA instillation and OVA exposure induced a further increase in values of pulmonary responsiveness (p = .043) and a decrease in the number of ciliated cells in the airway epithelium (p = .017). PM exposure results in pulmonary effects that are more intense in mice with chronic allergic pulmonary inflammation.

On the Rule of Mixtures for Predicting Stress-Softening and Residual Strain Effects in Biological Tissues and Biocompatible Materials

In this work, we use the rule of mixtures to develop an equivalent material model in which the total strain energy density is split into the isotropic part related to the matrix component and the anisotropic energy contribution related to the fiber effects. For the isotropic energy part, we select the amended non-Gaussian strain energy density model, while the energy fiber effects are added by considering the equivalent anisotropic volumetric fraction contribution, as well as the isotropized representation form of the eight-chain energy model that accounts for the material anisotropic effects. Furthermore, our proposed material model uses a phenomenological non-monotonous softening function that predicts stress softening effects and has an energy term, derived from the pseudo-elasticity theory, that accounts for residual strain deformations. The model’s theoretical predictions are compared with experimental data collected from human vaginal tissues, mice skin, poly(glycolide-co-caprolactone) (PGC25 3-0) and polypropylene suture materials and tracheal and brain human tissues. In all cases examined here, our equivalent material model closely follows stress-softening and residual strain effects exhibited by experimental data

Near infrared reflectance spectroscopy (NIRS) to predict biological parameters of maize silage: effects of particle comminution, oven drying temperature and the presence of residual moisture

Maize silage nutritive quality is routinely determined by near infrared reflectance spectroscopy (NIRS). However, little is known about the impact of sample preparation on the accuracy of the calibration to predict biological traits. A sample population of 48 maize silages representing a wide range of physiological maturities was used in a study to determine the impact of different sample preparation procedures (i.e., drying regimes; the presence or absence of residual moisture; the degree of particle comminution) on resultant NIR prediction statistics. All silages were scanned using a total of 12 combinations of sample pre-treatments. Each sample preparation combination was subjected to three multivariate regression techniques to give a total of 36 predictions per biological trait. Increased sample preparations procedure, relative to scanning the unprocessed whole plant (WP) material, always resulted in a numerical minimisation of model statistics. However, the ability of each of the treatments to significantly minimise the model statistics differed. Particle comminution was the most important factor, oven-drying regime was intermediate, and residual moisture presence was the least important. Models to predict various biological parameters of maize silage will be improved if material is subjected to a high degree of particle comminution (i.e., having been passed through a 1 mm screen) and developed on plant material previously dried at 60 degrees C. The extra effort in terms of time and cost required to remove sample residual moisture cannot be justified. (c) 2005 Elsevier B.V. All rights reserved.

Does high-frequency repetitive transcranial magnetic stimulation produce residual and/or cumulative effects within an experimental session?

A common procedure for studying the effects on cognition of repetitive transcranial magnetic stimulation (rTMS) is to deliver rTMS concurrent with task performance, and to compare task performance on these trials versus on trials without rTMS. Recent evidence that TMS can have effects on neural activity that persist longer than the experimental session itself, however, raise questions about the assumption of the transient nature of rTMS that underlies many concurrent (or "online") rTMS designs. To our knowledge, there have been no studies in the cognitive domain examining whether the application of brief trains of rTMS during specific epochs of a complex task may have effects that spill over into subsequent task epochs, and perhaps into subsequent trials. We looked for possible immediate spill-over and longer-term cumulative effects of rTMS in data from two studies of visual short-term delayed recognition. In 54 subjects, 10-Hz rTMS trains were applied to five different brain regions during the 3-s delay period of a spatial task, and in a second group of 15 subjects, electroencephalography (EEG) was recorded while 10-Hz rTMS was applied to two brain areas during the 3-s delay period of both spatial and object tasks. No evidence for immediate effects was found in the comparison of the memory probe-evoked response on trials that were vs. were not preceded by delay-period rTMS. No evidence for cumulative effects was found in analyses of behavioral performance, and of EEG signal, as a function of task block. The implications of these findings, and their relation to the broader literature on acute vs. long-lasting effects of rTMS, are considered.

Coating residual stress effects on fatigue performance of 7050-T7451 aluminum alloy

The tendency of the aircraft industry is to enhance customer value by improving performance and reducing environmental impact. In view of availability, aluminum alloys have a historically tendency to faster insertion due to their lower manufacturing and operated production infrastructure. In landing gear components, wear and corrosion control of many components is accomplished by surface treatments of chrome electroplating on steel or anodizing of aluminum. One of the most interesting environmentally safer and cleaner alternatives for the replacement of hard chrome plating or anodizing is tungsten carbide thermal spray coating, applied by the high velocity oxy fuel (HVOF) process. However, it was observed that residual stresses originating from these coatings reduce the fatigue strength of a component.An effective process as shot peening treatment, considered to improve the fatigue strength, pushes the crack sources beneath the surface in most of medium and high cycle cases, due to the compressive residual stress field induced. The objective of this research is to evaluate a tungsten carbide cobalt (WC-Co) coating applied by the high velocity oxy fuel (HVOF) process, used to replace anodizing. Anodic films were grown on 7050-T7451 aluminum alloy by sulfuric acid anodizing, chromic acid anodizing and hard anodizing. The influence on axial fatigue strength of anodic films grown on the aluminum alloy surface is to degrade the stress-life performance of the base material. Three groups of specimens were prepared and tested in axial fatigue to obtain S-N curves: base material, base material coated by HVOF and base material shot peened and coated.Experimental results revealed increase in the fatigue strength of Al 7050-T7451 alloy associated with the WC 17% Co coating. on the other hand, a reduction in fatigue life occurred in the shot peened and coated condition. Scanning electron microscopy technique and optical microscopy were used to observe crack origin sites, thickness and coating/substrate adhesion. (c) 2007 Elsevier B.V. All rights reserved.

Is cardiac tissue more susceptible than lung to oxidative effects induced by chronic nasotropic instillation of residual oil fly ash (ROFA)?

The current study aimed to determine the role of oxidants in cardiac and pulmonary toxicities induced by chronic exposure to ROFA. Eighty Wistar rats were divided into four groups: G1 (10 mu L Saline), G2 (ROFA 50 mu g/10 mu L), G3 (ROFA 250 mu g/10 mu L) and G4 (ROFA 500 mu g/10 mu L). Rats received ROFA by nasotropic instillation for 90 days. After that, they were euthanized and bronchoalveolar lavage (BAL) was performed for total count of leukocytes, protein and lactate dehydrogenase (LDH) determinations. Lungs and heart were removed to measure lipid peroxidation (MDA), catalase (CAT) and superoxide dismutase (SOD) activity. BAL presented an increase in leukocytes count in G4 in comparison to the Saline group (p = 0.019). In lung, MDA level was not modified by ROFA, while CAT was higher in G4 when compared to all other groups (p = 0.013). In heart, G4 presented an increase in MDA (p = 0.016) and CAT (p = 0.027) levels in comparison to G1. The present study demonstrated cardiopulmonary oxidative changes after a chronic ROFA exposure. More specifically, the heart tissue seems to be more susceptible to oxidative effects of long-term exposure to ROFA than the lung.