c&d-learning implementation architecture: Adapting e-learning to developing countries

From the educational point of view, the most widespread method in developing countries is on-site education. Technical and economic resources cannot support conventional distance learning infrastructures and it is even worse for courses in universities. They usually suffer a lack of qualified faculty staff, especially in technical degrees. The literature suggest that e-learning is a suitable solution for this problem, but its methods are developed attending to educational necessities of the First World and cannot be applied directly to other contexts. The proposed methodology is a variant of traditional e-learning adapted to the needs of developing countries. E-learning for Cooperation and Development (c&d-learning) is oriented to be used for educational institutions without adequate technical or human resources. In this paper we describe the c&d-learning implementation architecture based on three main phases: hardware, communication and software; e.g. computer and technical equipping, internet accessing and e-learning platform adaptation. Proper adaptation of educational contents to c&d-learning is discussed and a real case of application in which the authors are involved is described: the Ngozi University at Burundi.

Development of a tanks line for waxing landing gear parts

The aim of this article is to define the technical specifications and to design the implementation of a line of tanks that would be used in the process of waxing and de-waxing large pieces. As it is based in a real case, it is also analyzed the process of dismantling the former installation that supported these functions. The origin of this project is due to a new rating for the maintenance of landing gears which makes the previous waxing line that was prepared to work on smaller aircraft?s pieces, no longer adequate to the current workflow and processes.

Wheel-Rail Contact Forces in High-Speed Simply Supported Bridges at Resonance

The response of high-speed bridges at resonance, particularly under flexural vibrations, constitutes a subject of research for many scientists and engineers at the moment. The topic is of great interest because, as a matter of fact, such kind of behaviour is not unlikely to happen due to the elevated operating speeds of modern rains, which in many cases are equal to or even exceed 300 km/h ( [1,2]). The present paper addresses the subject of the evolution of the wheel-rail contact forces during resonance situations in simply supported bridges. Based on a dimensionless formulation of the equations of motion presented in [4], very similar to the one introduced by Klasztorny and Langer in [3], a parametric study is conducted and the contact forces in realistic situations analysed in detail. The effects of rail and wheel irregularities are not included in the model. The bridge is idealised as an Euler-Bernoulli beam, while the train is simulated by a system consisting of rigid bodies, springs and dampers. The situations such that a severe reduction of the contact force could take place are identified and compared with typical situations in actual bridges. To this end, the simply supported bridge is excited at resonace by means of a theoretical train consisting of 15 equidistant axles. The mechanical characteristics of all axles (unsprung mass, semi-sprung mass, and primary suspension system) are identical. This theoretical train permits the identification of the key parameters having an influence on the wheel-rail contact forces. In addition, a real case of a 17.5 m bridges traversed by the Eurostar train is analysed and checked against the theoretical results. The influence of three fundamental parameters is investigated in great detail: a) the ratio of the fundamental frequency of the bridge and natural frequency of the primary suspension of the vehicle; b) the ratio of the total mass of the bridge and the semi-sprung mass of the vehicle and c) the ratio between the length of the bridge and the characteristic distance between consecutive axles. The main conclusions derived from the investigation are: The wheel-rail contact forces undergo oscillations during the passage of the axles over the bridge. During resonance, these oscillations are more severe for the rear wheels than for the front ones. If denotes the span of a simply supported bridge, and the characteristic distance between consecutive groups of loads, the lower the value of , the greater the oscillations of the contact forces at resonance. For or greater, no likelihood of loss of wheel-rail contact has been detected. The ratio between the frequency of the primary suspension of the vehicle and the fundamental frequency of the bridge is denoted by (frequency ratio), and the ratio of the semi-sprung mass of the vehicle (mass of the bogie) and the total mass of the bridge is denoted by (mass ratio). For any given frequency ratio, the greater the mass ratio, the greater the oscillations of the contact forces at resonance. The oscillations of the contact forces at resonance, and therefore the likelihood of loss of wheel-rail contact, present a minimum for approximately between 0.5 and 1. For lower or higher values of the frequency ratio the oscillations of the contact forces increase. Neglecting the possible effects of torsional vibrations, the metal or composite bridges with a low linear mass have been found to be the ones where the contact forces may suffer the most severe oscillations. If single-track, simply supported, composite or metal bridges were used in high-speed lines, and damping ratios below 1% were expected, the minimum contact forces at resonance could drop to dangerous values. Nevertheless, this kind of structures is very unusual in modern high-speed railway lines.

Integración de baterías en sistemas fotovoltaicos conectados a red

La situación actual del mercado energético en España y el imparable aumento de las tasas por parte de las eléctricas, está fomentando la búsqueda de fuentes de energía alternativas que permitan a la población poder abastecerse de electricidad, sin tener que pagar unos costes tan elevados. Para cubrir esta necesidad, la energía fotovoltaica y sobretodo el autoconsumo con inyección a red o balance neto, está adquiriendo cada vez más importancia dentro del mundo energético. Pero la penetración de esta tecnología en la Red Eléctrica Española tiene un freno, la desconfianza por parte del operador de la red, ya que la fotovoltaica es una fuente de energía intermitente, que puede introducir inestabilidades en el sistema en caso de alta penetración. Por ello se necesita ganar la confianza de las eléctricas, haciendo que sea una energía predecible, que aporte potencia a la red eléctrica cuando se le pida y que opere participando en la regulación de la frecuencia del sistema eléctrico. Para tal fin, el grupo de investigación de Sistemas Fotovoltaicos, perteneciente al IES de la UPM, está llevando a cabo un proyecto de investigación denominado PV CROPS, financiado por la Comisión Europea, y que tiene por objetivo desarrollar estas estrategias de gestión. En este contexto, el objetivo de este Proyecto Fin de Carrera consiste en implementar un Banco de Ensayos con Integración de Baterías en Sistemas FV Conectados a Red, que permita desarrollar, ensayar y validar estas estrategias. Aprovechando la disponibilidad para usar el Hogar Digital, instalado en la EUITT de la UPM, hemos montado el banco de ensayos en un laboratorio contiguo, y así, poder utilizar este Hogar como un caso real de consumos energéticos de una vivienda. Este banco de ensayos permitirá obtener información de la energía generada por la instalación fotovoltaica y del consumo real de la "casa" anexa, para desarrollar posteriormente estrategias de gestión de la electricidad. El Banco de Ensayos está compuesto por tres bloques principales, interconectados entre sí:  Subsistema de Captación de Datos y Comunicación. Encargado de monitorizar los elementos energéticos y de enviar la información recopilada al Subsistema de Control. Formado por analizadores de red eléctrica, monofásicos y de continua, y una pasarela orientada a la conversión del medio físico Ethernet a RS485.  Subsistema de Control. Punto de observación y recopilación de toda la información que proviene de los elementos energéticos. Es el subsistema donde se crearán y se implementarán estrategias de control energético. Compuesto por un equipo Pxie, controlador empotrado en un chasis de gama industrial, y un equipo PC Host, compuesto por una workstation y tres monitores.  Subsistema de Energía. Formado por los elementos que generan, controlan o consumen energía eléctrica, en el Banco de Ensayos. Constituido por una pérgola FV, un inversor, un inversor bidireccional y un bloque de baterías. El último paso ha sido llevar a cabo un Ejemplo de Aplicación Práctica, con el que hemos probado que el Banco de Ensayos está listo para usarse, es operativo y completamente funcional en operaciones de monitorización de generación energética fotovoltaica y consumo energético. ABSTRACT. The current situation of the energetic market in Spain and the unstoppable increase of the tax on the part of the electrical companies, is promoting the search of alternative sources of energy that allow to the population being able to be supplied of electricity, without having to pay so high costs. To meet this need, the photovoltaic power and above all the self-consumption with injection to network, it is increasingly important inside the energetic world. It allows to the individual not only to pay less for the electricity, in addition it allows to obtain benefits for the energy generated in his own home. But the penetration of this technology in the Electrical Spanish Network has an obstacle, the distrust on the part of the operator of the electrical network, due to the photovoltaic is an intermittent source of energy, which can introduce instabilities in the system in case of high penetration. Therefore it´s necessary to reach the confidence of the electricity companies, making it a predictable energy, which provides with power to the electrical network whenever necessary and that operates taking part in the regulation of the frequency of the electric system. For such an end, the group of system investigation Photovoltaic, belonging to the IES of the UPM, there is carrying out a project of investigation named PV CROPS, financed by the European Commission, and that has for aim to develop these strategies of management. In this context, the objective of this Senior Thesis consists in implementing a Bank of Tests with Integration of Batteries in Photovoltaic Systems Connected to Network, which allows developing, testing and validating these strategies. Taking advantage of the availability to use the Digital Home installed in the EUITT of the UPM, we have mounted the bank of tests in a contiguous laboratory to use this Home as a real case of energetic consumptions of a house. This bank of tests will allow obtaining information of the energy generated by the photovoltaic installation and information of the royal consumption of the attached "house", to develop later strategies of management of the electricity. The Bank of Tests is composed by three principal blocks, interconnected each other:  Subsystem of Gathering of data and Communication. In charge of monitoring the energetic elements and sending the information compiled to the Subsystem of Control. Formed by power analyzers, AC and DC, and a gateway for the conversion of the Ethernet physical medium to RS485.  Subsystem of Control. Point of observation and compilation of all the information that comes from the energetic elements. It is the subsystem where there will be created and there will be implemented strategies of energetic control. Composed of a Pxie, controller fixed in an industrial range chassis, and a PC Host, formed by a workstation and three monitors.  Subsystem of Energy. Formed by the elements of generating, controlling or consuming electric power, in the Bank of Tests. Made of photovoltaic modules, an inverter, a twoway inverter and a batteries block. The last step has been performing an Example of Practical Application we have proved that the Bank of Tests is ready to be used, it´s operative and fully functional in monitoring operations of energetic photovoltaic generation and energetic consumption.

datos.bne.es and MARiMbA: an insight into Library Linked Data

Purpose – Linked data is gaining great interest in the cultural heritage domain as a new way for publishing, sharing and consuming data. The paper aims to provide a detailed method and MARiMbA a tool for publishing linked data out of library catalogues in the MARC 21 format, along with their application to the catalogue of the National Library of Spain in the datos.bne.es project. Design/methodology/approach – First, the background of the case study is introduced. Second, the method and process of its application are described. Third, each of the activities and tasks are defined and a discussion of their application to the case study is provided. Findings – The paper shows that the FRBR model can be applied to MARC 21 records following linked data best practices, librarians can successfully participate in the process of linked data generation following a systematic method, and data sources quality can be improved as a result of the process. Originality/value – The paper proposes a detailed method for publishing and linking linked data from MARC 21 records, provides practical examples, and discusses the main issues found in the application to a real case. Also, it proposes the integration of a data curation activity and the participation of librarians in the linked data generation process.

Diseño de una metodología para la normalización del paisaje en España a partir del análisis de normas y de estudios cienciométricos: Aplicación al impacto paisajístico de las infraestructuras de transporte

La presente tesis se enmarca dentro de los trabajos realizados en el Proyecto CENIT OASIS (Operación de Autopistas Seguras Inteligentes y Sostenibles) sobre el impacto y la integración paisajística de las autopistas, y en los trabajos realizados por el grupo de trabajo GT 13 (paisaje) dentro del comité técnico nacional CTN 157 (proyectos) para normalización del Paisaje en España, del que la doctoranda es secretaria técnica. El objetivo principal de esta tesis es desarrollar una Metodología que permita la normalización del paisaje en España. Por ello, establece las bases para el desarrollo científico y profesional en el ámbito del paisaje, a través de la caracterización de la actividad científica y de la actividad normalizadora internacional. Para después elaborar una propuesta de documentos normativos para su regulación en España. Por último, se pone en práctica la única de las normas aplicables a un caso real, concretamente en la AP-7 a su paso por la provincia de Gerona. La caracterización de la actividad científica en el ámbito del paisaje proporciona una visión global que sirve de referencia a las futuras investigaciones en la materia, no existente hasta la fecha. Entre los múltiples resultados, se identifican las áreas de conocimiento y disciplinas afines desde las que se aborda el paisaje, se analiza la evolución de las temáticas y líneas de investigación en el campo, se determina la distribución e impacto de la producción científica, destacando los países y centros de investigación punteros y sus colaboraciones, y se determinan las publicaciones más destacadas en la materia. La caracterización de la actividad normativa internacional hasta la fecha supone un referente en este campo, habiendo traducido, analizado y clasificado decenas de documentos sobre temas como la terminología, la profesión de paisajista, las reglas generales para las intervenciones en el paisaje, las normas para la protección del paisaje y normas para la evaluación del impacto paisajístico. La tesis desarrolla tres documentos normativos, que se espera sean el germen de los futuros documentos legales para normalización del Paisaje en España. El principal objetivo de la normalización es dotar a los profesionales de las herramientas necesarias para desarrollar sus intervenciones en el paisaje. Para ello, se ha elaborado un documento normativo sobre terminología del concepto clave y los términos asociados en castellano, que sirva de referencia para un futuro documento normativo; un documento normativo que regule los estudios de integración e impacto paisajístico en España, definiendo una serie de pautas que ayuden a los profesionales a desarrollar los proyectos de intervención en el paisaje; un documento que regule y defina la profesión de arquitecto paisajista, identificando sus capacidades, formaciones y competencias. Por último, el documento de impacto e integración paisajística se aplica a un caso concreto de infraestructuras del transporte, dentro del proyecto OASIS, sirviendo como ejemplo a los profesionales de la materia para desarrollar futuras intervenciones. El enfoque de este documento coincide con el de paisaje ecológico, el análisis del paisaje se aborda desde lo visible (fenosistema) y desde los procesos que lo conforman (criptosistema). Y las medidas de integración pretenden conseguir que la infraestructura forme parte del paisaje y de los procesos que ocurren en él, lo que en la tesis se define como Infraestructuras Verdes. ABSTRACT The thesis is within the framework of the CENIT OASIS Project (Operation of Safe, Intelligent and Sustainable Highways) about the landscape impact and integration of highways, and the work done by the working group GT 13 (landscape) in the national technical committee CTN 157 (projects) for landscape standardization in Spain, of which the PhD is technical secretary. The main objective of this thesis is to develop a Methodology that allows the landscape standardization in Spain. Therefore, it establishes the basis for the scientific and professional development in the landscape field, through the characterization of scientific and international normalizing activity. It concludes with the proposal of regulatory documents for its use in Spain. Finally, it implements the only of the rules applicable to a real case, specifically in the AP- 7 passing through the Gerona province. The characterization of scientific activity in the landscape field provides an overview that is a reference in the researches in this field, non-existent to date. Among the many results, the areas of knowledge and related disciplines, from which the landscape is addressed, are identified; the evolution of topics and lines of research in the field are analyzed; the distribution and impact of scientific production is determined, highlighting the countries and leading research centers and collaborations; and the leading publications in the field are determined. The characterization of the international regulatory activity to date is a model in this field, having translated, analyzed and classified dozens of papers about terminology, the landscapist profession, general rules for intervention in the landscape, standards for the landscape protection and rules for the assessment of landscape impact. The thesis develops three normative documents, which are expected to be the germ of future legal documents for standardization landscape in Spain. The main objective of standardization is to provide the necessary tools for professionals who work developing interventions in the landscape. To do this, it has been developed a normative document about terminology on the key concept and the associated terms in Castilian, as a reference for a future normative document; a normative document that regulates studies of landscape integration and impact in Spain, defining a set of guidelines to help professionals to develop intervention projects in the landscape; a document to regulate and define the activities developed by the professionals, defining the profession of landscape architect, their capabilities and competencies. Finally, the document of landscape impact and integration is applied to a particular case of transport infrastructures within the OASIS project, serving as an example to professionals in the field to develop future interventions. The focus of this document coincides with the ecological landscape; the landscape analysis is approached from the visible (fenosystem) and from the processes that shape it (cryptosystem); and integration measures aim to achieve that the infrastructure take part of the landscape and its existing processes, which in this thesis is defined as Green Infrastructures.

Técnicas y herramientas de análisis de vulnerabilidades de una red

El presente documento pretende ofrecer una visión general del estado del conjunto de herramientas disponibles para el análisis y explotación de vulnerabilidades en sistemas informáticos y más concretamente en redes de ordenadores. Por un lado se ha procedido a describir analíticamente el conjunto de herramientas de software libre que se ofrecen en la actualidad para analizar y detectar vulnerabilidades en sistemas informáticos. Se ha descrito el funcionamiento, las opciones, y la motivación de uso para dichas herramientas, comparándolas con otras en algunos casos, describiendo sus diferencias en otros, y justificando su elección en todos ellos. Por otro lado se ha procedido a utilizar dichas herramientas analizadas con el objetivo de desarrollar ejemplos concretos de uso con sus diferentes parámetros seleccionados observando su comportamiento y tratando de discernir qué datos son útiles para obtener información acerca de las vulnerabilidades existentes en el sistema. Además, se ha desarrollado un caso práctico en el que se pone en práctica el conocimiento teórico presentado de forma que el lector sea capaz de asentar lo aprendido comprobando mediante un caso real la utilidad de las herramientas descritas. Los resultados obtenidos han demostrado que el análisis y detección de vulnerabilidades por parte de un administrador de sistemas competente permite ofrecer a la organización en cuestión un conjunto de técnicas para mejorar su seguridad informática y así evitar problemas con potenciales atacantes. ABSTRACT. This paper tries to provide an overview of the features of the set of tools available for the analysis and exploitation of vulnerabilities in computer systems and more specifically in computer networks. On the one hand we pretend analytically describe the set of free software tools that are offered today to analyze and detect vulnerabilities in computer systems. We have described the operation, options, and motivation to use these tools in comparison with other in some case, describing their differences in others, and justifying them in all cases. On the other hand we proceeded to use these analyzed tools in order to develop concrete examples of use with different parameters selected by observing their behavior and trying to discern what data are useful for obtaining information on existing vulnerabilities in the system. In addition, we have developed a practical case in which we put in practice the theoretical knowledge presented so that the reader is able to settle what has been learned through a real case verifying the usefulness of the tools previously described. The results have shown that vulnerabilities analysis and detection made by a competent system administrator can provide to an organization a set of techniques to improve its systems and avoid any potential attacker.

Contribution to active multi-beam reconfigurable antennas for L and S bands

La presente tesis doctoral con título "Contribution to Active Multi-Beam Reconfigurable Antennas for L and S Bands" ha sido desarrollada por el investigador ingeniero de telecomunicación estudiante de doctorado Javier García-Gasco Trujillo en el Grupo de Radiación del Departamento de Señales, Sistemas y Radiocomunicaciones de la ETSI de Telecomunicación de la Universidad Politécnica de Madrid bajo la dirección de los doctores Manuel Sierra Pérez y José Manuel Fernández González. Durante décadas, el desarrollo de antenas de apuntamiento electrónico ha estado limitado al área militar. Su alto coste y su gran complejidad eran los mayores obstáculos que frenaban la introducción de esta tecnología en aplicaciones comerciales de gran escala. La reciente aparición de componentes de estado sólido prácticos, fiables, y de bajo coste ha roto la barrera del coste y ha reducido la complejidad, haciendo que las antenas reconfigurables de apuntamiento electrónico sean una opción viable en un futuro cercano. De esta manera, las antenas phased array podrían llegar a ser la joya de la corona que permitan alcanzar los futuros retos presentes en los sistemas de comunicaciones tanto civiles como militares. Así pues, ahora es el momento de investigar en el desarrollo de antenas de apuntamiento electrónico de bajo coste, donde los nuevos componentes de estado sólido comerciales forman el núcleo duro de la arquitectura. De esta forma, el estudio e implementación de estos arrays de antenas activas de apuntamiento electrónico capaces de controlar la fase y amplitud de las distintas señales implicadas es uno de los grandes retos de nuestro tiempo. Esta tesis se enfrenta a este desafío, proponiendo novedosas redes de apuntamiento electrónico e innovadores módulos de transmisión/recepción (T/R) utilizando componentes de estado sólido de bajo coste, que podrán integrar asequibles antenas activas reconfigurables multihaz en bandas L y S. En la primera parte de la tesis se realiza una descripción del estado del arte de las antenas phased array, incluyendo su base teórica y sus ventajas competitivas. Debido a que las contribuciones obtenidas en la presente tesis han sido realizadas dentro de distintos proyectos de investigación, donde se han manejada antenas de simple/doble polarización circular y simple/doble banda de trabajo, se describen detenidamente los dos proyectos más relevantes de la investigación: el radar de basura espacial de la Agencia Espacial Europea (ESA), Space Situational Awareness (SSA); y la estación base de seguimiento y control de satélites de órbita baja, GEOdesic Dome Array (GEODA). Sin lugar a dudas, los dispositivos desfasadores son uno de los componentes clave en el diseño de antenas phased arrays. Recientemente se ha observado una gran variación en el precio final de estos dispositivos, llegando en ocasiones a límites inasequibles. Así pues, se han propuesto distintas técnicas de conformación de haz alternativas a la utilización de componentes desfasadores comerciales: el desfasador de líneas conmutadas, la red de haz conmutado, y una novedosa red desfasadora divisora/combinadora de potencia. Para mostrar un uso práctico de las mismas, se ha propuesto el uso de las tres alternativas para el caso práctico del subarray de cinco elementos de la celda GEODA-SARAS. Tras dicho estudio se obtiene que la novedosa red desfasadora divisora/combinadora de potencia propuesta es la que mejor relación comportamiento/coste presenta. Para verificar su correcto funcionamiento se construye y mide los dos bloques principales de los que está compuesta la red total, comprobando que en efecto la red responde según lo esperado. La estructura más simple que permite realizar un barrido plano es el array triangular de tres elementos. Se ha realizado el diseño de una nueva red multihaz que es capaz de proporcionar tres haces ortogonales en un ángulo de elevación _0 y un haz adicional en la dirección broadside utilizando el mencionado array triangular de tres elementos como antena. En primer lugar se realizar una breve introducción al estado del arte de las redes clásicas multihaz. Así mismo se comentan innovadores diseños de redes multihaz sin pérdidas. El estudio da paso a las redes disipativas, de tal forma que se analiza su base matemática y se muestran distintas aplicaciones en arrays triangulares de tres elementos. Finalmente, la novedosa red básica propuesta se presenta, mostrando simulaciones y medidas de la misma para el caso prácticoo de GEODA. También se ha diseñado, construido y medido una red compuesta por dos redes básicas complementarias capaz de proporcionar seis haces cuasi-ortogonales en una dirección _0 con dos haces superpuestos en broadside. La red propuesta queda totalmente validada con la fabricación y medida de estos con prototipos. Las cadenas de RF de los módulos T/R de la nueva antena GEODA-SARAS no son algo trivial. Con el fin de mostrar el desarrollo de una cadena compleja con una gran densidad de componentes de estado sólido, se presenta una descripción detallada de los distintos componentes que integran las cadenas de RF tanto en transmisión como en recepción de la nueva antena GEODA-SARAS. Tras presentar las especificaciones de la antena GEODA-SARA y su diagrama de bloques esquemático se describen los dos bloques principales de las cadenas de RF: la celda de cinco elementos, y el módulo de conversión de panel. De la misma manera también se presentará el módulo de calibración integrado dentro de los dos bloques principales. Para comprobar que el funcionamiento esperado de la placa es el adecuado, se realizará un análisis que tratará entre otros datos: la potencia máxima en la entrada del transmisor (comprobando la saturación de la cadena), señal de recepción mínima y máxima (verificando el rango de sensibilidad requerido), y el factor G/T (cumpliendo la especificación necesaria). Así mismo se mostrará un breve estudio del efecto de la cuantificación de la fase en el conformado de haz de RF. Los estudios muestran que la composición de las cadenas de RF permite el cumplimiento de las especificaciones necesarias. Finalmente la tesis muestra las conclusiones globales del trabajo realizado y las líneas futuras a seguir para continuar con esta línea de investigación. ABSTRACT This PhD thesis named "Contribution to Active Multi-Beam Reconfigurable Antennas for L and S Bands", has been written by the Electrical Engineer MSc. researcher Javier García-Gasco Trujillo in the Grupo de Radiación of the Departamento de Señales, Sistemas y Radiocomunicaciones from the ETSI de Telecomunicación of the Universidad Politécnica de Madrid. For decades, the implementation of electronically steerable phased array antennas was confined to the military area. Their high cost and complexity were the major obstacles to introduce this technology in large scale commercial applications. The recent emergence of new practical, low-cost, and highly reliable solid state devices; breaks the barrier of cost and reduces the complexity, making active phased arrays a viable future option. Thus, phased array antennas could be the crown jewel that allow to meet the future challenges in military and civilian communication systems. Now is time to deploy low-cost phased array antennas, where newly commercial components form the core of the architecture. Therefore, the study and implementation of these novel low-cost and highly efficient solid state phased array blocks capable of controlling signal phase/amplitude accurately is one of the great challenges of our time. This thesis faces this challenge, proposing innovative electronic beam steering networks and transmitter/ receiver (T/R) modules using affordable solid state components, which could integrate fair reconfigurable phased array antennas working in L and S bands. In the first part of the thesis, a description of the state of art of phased array antennas, including their fundamentals and their competitive advantages, is presented. Since thesis contributions have been carried out for different research projects, where antennas with single/double circular polarization and single/double working frequency bands have been examined, frameworks of the two more important projects are detailed: the Space Situational Awareness (SSA) programme from the European Space Agency (ESA), and the GEOdesic Dome Array (GEODA) project from ISDEFE-INSA and the ESA. Undoubtedly, phase shifter devices are one of the key components of phased array antennas. Recent years have witnessed wide fluctuations in commercial phase shifter prices, which sometimes led to unaffordable limit. Several RF steering technique alternatives to the commercial phase shifters are proposed, summarized, and compared: the switched line phase shifter, the switched-beam network, and the novel phase shifter power splitter/combiner network. In order to show a practical use of the three different techniques, the five element GEODA-SARAS subarray is proposed as a real case of study. Finally, a practical study of a newly phase shifter power splitter/combiner network for a subarray of five radiating elements with triangular distribution is shown. Measurements of the two different phase shifter power splitter/combiner prototypes integrating the whole network are also depicted, demonstrating their proper performance. A triangular cell of three radiating elements is the simplest way to obtain a planar scanner. A new multibeam network configuration that provides three orthogonal beams in a desired _0 elevation angle and an extra one in the broadside steering direction for a triangular array of three radiating elements is introduced. Firstly, a short introduction to the state of art of classical multi-beam networks is presented. Lossless network analysis, including original lossless network designs, are also commented. General dissipative network theory as well as applications for array antennas of three radiating elements are depicted. The proposed final basic multi-beam network are simulated, built and measured to the GEODA cell practical case. A combined network that provides six orthogonal beams in a desired _0 elevation angle and a double seventh one in the broadside direction by using two complementary proposed basic networks will be shown. Measurements of the whole system will be also depicted, verifying the expected behavior. GEODA-SARAS T/R module RF chains are not a trivial design. A thorough description of all the components compounding GEODA-SARAS T/R module RF chains is presented. After presenting the general specifications of the GEODA-SARAS antenna and its block diagrams; two main blocks of the RF chains, the five element cell and the panel conversion module, are depicted and analyzed. Calibration module integrated within the two main blocks are also depicted. Signal flow throw the system analyzing critical situations such as maximum transmitted power (testing the chain unsaturation), minimum and maximum receiving signal (verifying sensitivity range), maximum receiver interference signals (assuring a proper reception), and G/T factor (fulfilling the technical specification) are evaluated. Phase quantization error effects are also listed. Finally, the manuscript contains the conclusions drawn of the present research and the future work.

Consideraciones sobre el montaje de conectores para optimizar su respuesta en bandas milimétricas

Connectors are essential in many circuits to communicate with exterior world. When working in millimeter wave frequencies, connectors require very tight tolerances and being mounted exactly in the correct way. Main problems which use to appear when working with millimeter wave connectors have been collected in this article. Besides that, some basic guidelines to get optimal connector performance are given. To illustrate how these advices can improve connector operation, they have been used in a real case.

Estudio acústico y electroacústico de la sala 5 de los cines Kinépolis de Madrid

En el proyecto se realiza el estudio del comportamiento acústico y electroacústico de la sala 5 de los cines Kinépolis de Madrid. El objetivo es determinar las características acústicas de la sala mediante la realización de las medidas in-situ para después analizar y simular la misma con EASE4.4, realizar una sonorización apropiada para reproducción de cine, valorar la sala actual y proponer algunas mejoras. El desarrollo del proyecto se ha dividido en tres partes. En primer lugar, se realizan las medidas espaciales y acústicas in-situ con el programa de toma de medidas Dirac 5.5. En este paso, se obtienen las medidas reales (usadas en la simulación 3D posterior) y los dos parámetros acústicos importantes inherentes a la sala, el tiempo de reverberación y el ruido de fondo. Además, se estudia el conexionado de altavoces y de los equipos instalados en sala. En segundo lugar, se hace la simulación de la sala, para ello se realiza su diseño con el programa de simulación acústica EASE 4.4, con el que se ajustan las condiciones de campo a las existentes en Kinépolis, asegurando que el comportamiento acústico de la sala simulada sea similar al real. También se distribuirá el sistema electroacústico con la descripción del conexionado y la configuración de los altavoces. En la simulación, durante el estudio acústico, además de desarrollar el dimensionado del recinto, se ajustan los materiales de tal manera que el tiempo de reverberación sea el de la sala de estudio considerando también el ruido de fondo. En cuanto al estudio electroacústico, se distribuyen los altavoces en las posiciones medidas in-situ de la instalación y se detalla su conexionado. De esta manera, se realizan los cálculos para ajustar sus respuestas para proporcionar un recubrimiento sonoro uniforme y el efecto precedencia desde la zona frontal al oyente deseado. Finalmente, y a partir de los datos obtenidos en la simulación, se hace una valoración a través de diversos criterios de inteligibilidad, se extraen las conclusiones del estudio y se proponen una serie de mejoras en la sala real para obtener unas prestaciones sonoras óptimas. Se consigue con el proyecto, tras el aprendizaje de las herramientas específicas utilizadas, la recopilación de documentación y el análisis de datos de la sala, aplicar los conceptos teóricos de manera práctica a un caso real. ABSTRACT. During the project is carried out the acoustic and electroacoustic study of the room cinema 5 of the Kinépolis group in Madrid. The objective is to determine the acoustic characteristics of the room by performing the in-situ measurements in order to analyze and simulate it with the software EASE 4.4 making an appropriate sound for movie playback, assess the current room, and propose some improvements. Development of the project is composed of three parts. First, the performing of the spatial and acoustic in-situ measurements with the program Dirac 5.5. On this step, the real measures are obtained (that will be used on the next 3D simulation) and the two important parameters inherent to the room, the reverberation time and the noise level. In addition, the speaker connections and the installations of the cinema’s equipment are studied. Secondly, the simulation of the room cinema is performed. This simulation is done with the acoustic simulation program EASE 4.4 in which its field conditions conform to the conditions of Kinépolis, ensuring that the acoustic behavior of the simulated room is similar to the real room. Also, the electroacustic system is distributed with the wiring and the speaker setup. During the acoustic study of the simulation, in addition to do the dimensions of the cinema room, the materials are adjusted in order to synchronize reverberation time to that of the real room. The noise level is taking in account too. For the electroacustic studio, the speakers will be distributed in the positions measured in-situ to do the installation and its detailed connection. By this way, the calculations are done to adjust to the responses in a way to give a sound uniform coating with the precedence effect desired on the front area of the listeners. Lastly, and from the data obtained in the simulation, an assessment is done through the various criteria of intelligibility, conclusions are drawn from the study and a number of improvements are proposed in the actual room for obtain optimal sound benefits. With this project is achieved, after gain learning of the specific tolls used, the documentation collected and the data analysis of the room, to apply theoretical concepts in a practical way for a real case.

Improving engineering students' communication competence: designing innovative learning strategies

This research presents an innovative and formal educational initiative that is aimed at enhancing the development of engineering students’ specific competencies when studying Engineering Project Management subject. The framework of the experience combines theoretical concepts, the development of a real-case project carried out by multidisciplinary groups of three different universities, the use of software web 2.0 tools, and group and individual assignments of students that play different roles (project managers and team members). Under this scenario, this paper focuses on monitoring the communication competence in the ever growing Project Management virtual environment. Factors such as corporal language, technical means, stage, and management specific vocabulary among others have been considered in order to assess the students’ performance on this issue. As a main contribution, the paper introduces an ad-hoc rubric that, based on previous investigations, has been adapted and tested to this specific context. Additionally, the research conducted has provided some interesting findings that suggest further actions to improve and better define future rubrics, oriented to communication or even other competencies. As specific Project Management subject concerns, it has been detected that students playing the role of Project Managers strengthen their competencies more than those ones that play the role of Team Members. It has also been detected that students have more difficulty assimilating concepts related to risk and quality management. However those concepts related with areas of knowledge like scope, time or cost have been better assimilated by the students.

Power-frequency control of hydropower plants with long penstocks in isolated systems with wind generation

In this paper the power-frequency control of hydropower plants with long penstocks is addressed. In such configuration the effects of pressure waves cannot be neglected and therefore commonly used criteria for adjustment of PID governors would not be appropriate. A second-order Π model of the turbine-penstock based on a lumped parameter approach is considered. A correction factor is introduced in order to approximate the model frequency response to the continuous case in the frequency interval of interest. Using this model, several criteria are analysed for adjusting the PI governor of a hydropower plant operating in an isolated system. Practical criteria for adjusting the PI governor are given. The results are applied to a real case of a small island where the objective is to achieve a generation 100% renewable (wind and hydro). Frequency control is supposed to be provided exclusively by the hydropower plant. It is verified that the usual criterion for tuning the PI controller of isolated hydro plants gives poor results. However, with the new proposed adjustment, the time response is considerably improved

Railway Rapid Transit timetables with variable and elastic demand.

This paper focuses on the design of railway timetables considering a variable elastic demand profile along a whole design day. Timetabling is the third stage in the classical hierarchical railway planning process. Most of previous works on this topic consider a uniform demand behavior for short planning intervals. In this paper, we propose a MINLP model for designing non-periodic timetables on a railway corridor where demand is dependent on waiting times. In the elastic demand case, long waiting times lead to a loss of passengers, who may select an alternative transportation mode. The mode choice is modeled using two alternative methods. The first one is based on a sigmoid function and can be used in case of absence of information for competitor modes. In the second one, the mode choice probability is obtained using a Logit model that explicitly considers the existence of a main alternative mode. With the purpose of obtaining optimal departure times, in both cases, a minimization of the loss of passengers is used as objective function. Finally, as illustration, the timetabling MINLP model with both mode choice methods is applied to a real case and computational results are shown.

Aplicación de la técnica de inyección del terreno por fracturación hidráulica a las cimentaciones de puentes en circunstancias de especial dificultad

La implantación de una gran obra de paso facilita en multitud de ocasiones la vida de aquellos que aprovechen las ventajas que ofrece esta estructura. Sin embargo, el camino que lleva a su construcción supone importantes y tortuosos retos cuando el terreno de cimentación presenta condiciones geotécnicas no compatibles con las grandes cargas que el viaducto necesita transmitirle para su buen funcionamiento. El trabajo que desarrolla esta Tesis Doctoral proporciona una herramienta eficaz y económica, por lo reducido de su extensión y medios, que permite allanar el camino que acomete la construcción de una estructura de tal envergadura. Mediante el análisis de la problemática del terreno y de las distintas soluciones de cimentación empleadas en la actualidad, se conduce al lector hacia una técnica de cimentación innovadora que combina la técnica del micropilotaje, para la canalización de las cargas estructurales, junto a la técnica de la inyección de fracturación hidráulica, que mejorará el terreno de implantación de los micropilotes, conformando así un medio capaz de recibir y transmitir grandes cargas en cualquier tipo de terreno. La técnica ya empleada del micropilotaje, por su trabajo esencialmente axil, requiere, aunque sin problema, la constitución de sistemas de fuerzas que equilibren el sistema de cargas provenientes del viaducto. Pero su capacidad resistente viene condicionada por el terreno circundante. Cuando la roca rodea el micropilote, su empleo se realiza sin problema y sin necesidad de mejorar el terreno. Pero sin terreno consistente, el empleo de inyecciones de fracturación hidráulica a través de los propios micropilotes, no sólo mejorará la capacidad resistente de los micropilotes, aumentando la inercia necesaria cuando las cargas son de origen sísmico o estructural ferroviario, sino que resolverá y eliminará los problemas de estabilidad que presentan las laderas que frecuentemente deben recibir las cargas de la obra de paso. Tras recoger el análisis ya realizado en el Trabajo de Investigación, donde se justificaba la alta capacidad resistente de un micropilote con terreno circundante mejorado por la inyección, en la actual Tesis se emplean modelos matemáticos sobre un caso real de viaducto sometido a un gran sismo e implantado en una enorme quebrada (500 m) de Colombia, sujeta a lluvias torrenciales y en la zona de mayor sismicidad del país. Con ello se comprueba la estabilización que se alcanza en el terreno de cimentación con el empleo de esta técnica de transmisión de carga y mejora del terreno. De esta forma se completa un ciclo que justifica las bondades de esta combinación de técnicas de cimentación, pero se abren las puertas a nuevos entornos de aplicación, como edificios antiguos de cualquier tipo que requieran recalces, y no sólo en la implantación de grandes obras de paso. ABSTRACT The establishment of a large bridge represents, in many cases, a better life for those who can take profit of the advantages provided by that structure. Nevertheless, the process of building this structure has to overcome important and difficult circumstances whenever the geotechnical conditions of the bridge site are not adequate to carry the large loads transmitted by the bridge structure. This study develops a method both effective and economical, due to the extension and means necessary for its application, which allows to solve properly the foundation of a structure of that importance. Considering the geotechnical problems inherent to the bridge site, along with the different foundation solutions that are presently used and their limitations, the study leads the reader to an innovative technique which combines the micropile system, for transmission of the structural loads of the bridge, with the technique of hydraulic fracture grouting for improvement of the ground around the micropiles, allowing to both stabilizing and transmitting large loads in any kind of ground. It is well known that the micropiles work axially, and this condition requires an adequate distribution of those units, in order to properly absorb the load system introduced by the viaduct. The resistance of the bridge foundation is, in any case, provided by the ground. When rock is encountered, the micropiles have been successfully used without improving the ground. However, as it is shown in this study, by using the micropiles as sleeve-pipes for hydraulic fracture grouting, not only the micropile resistance can be improved in any ground, but it is possible to develop grouted “solids” in the ground, whose inertia allows to absorb actions of structural and seismic origin. Additionally, as it is shown and analyzed in the Thesis, the ground improvement can give an adequate safety factor to the slopes frequently encountered in bridge sites. In order to properly justify those advantages of combining micropiles with ground improvement through fracture grouting around the micropiles, mathematical models have been developed and applied to a real case of a cable-stayed bridge installed on a very large ravine (500 m) in Colombia, located in the highest seismic zone of the country, and subject to torrential rains. The results of this numerical analysis show the high safety condition provided by the ground improvement to the viaduct site. In conclusion, the Thesis shows the important improvement that can be provided by the combination of micropiles and soil improvement, through fracture grouting, to the problem of founding bridges. However, it can be understood that this technique could be applied successfully to underpinning buildings, specially old buildings of any type, apart from its use in bridge foundations.

Social Indicators in the Sustainable Refurbishment: Calculating Quality of Life Indicator in a Residential Building in Málaga

How can we measure ‘quality of life’? The sustainable refurbishment goes beyond strictly energy aspects. Sustainability indicators are needed to facilitate data collection and to provide information which does not require too time-consuming calculations. Thus, you can offer an idea of the extent and quality of the rehabilitation before starting the project and, also, the obtained results can be evaluated in an agile way after the refurbishment. From a list of social indicators gathered from different methods, sustainability assessment tools and International and European standards, three social indicators are proposed: Users Satisfaction, Participation Agreement and Quality of Life. This paper shows the development of Quality of Life social indicator, the more closely related to the main objectives of Researchand Development Project “Sustainable Refurbishment”: improving energy efficiency and wellbeing of users in existing residential buildings. Finally, this social indicator is applied to a real case study in Málaga (Spain).