Cilengitide: an RGD pentapeptide ανβ3 and ανβ5 integrin inhibitor in development for glioblastoma and other malignancies.

Cilengitide, a cyclicized arginine-glycine-aspartic acid-containing pentapeptide, potently blocks ανβ3 and ανβ5 integrin activation. Integrins are upregulated in many malignancies and mediate a wide variety of tumor-stroma interactions. Cilengitide and other integrin-targeting therapeutics have preclinical activity against many cancer subtypes including glioblastoma (GBM), the most common and deadliest CNS tumor. Cilengitide is active against orthotopic GBM xenografts and can augment radiotherapy and chemotherapy in these models. In Phase I and II GBM trials, cilengitide and the combination of cilengitide with standard temozolomide and radiation demonstrate consistent antitumor activity and a favorable safety profile. Cilengitide is currently under evaluation in a pivotal, randomized Phase III study (Cilengitide in Combination With Temozolomide and Radiotherapy in Newly Diagnosed Glioblastoma Phase III Randomized Clinical Trial [CENTRIC]) for newly diagnosed GBM. In addition, randomized controlled Phase II studies with cilengitide are ongoing for non-small-cell lung cancer and squamous cell carcinoma of the head and neck. Cilengitide is the first integrin inhibitor in clinical Phase III development for oncology.

Evaluation of an intravitreal fluocinolone acetonide implant versus standard systemic therapy in noninfectious posterior uveitis.

PURPOSE: To evaluate the safety and efficacy of an intravitreal fluocinolone acetonide (FA) implant compared with standard therapy in subjects with noninfectious posterior uveitis (NIPU). DESIGN: Randomized, controlled, phase 2b/3, open-label, multicenter superiority trial. PARTICIPANTS: Subjects with unilateral or bilateral NIPU. METHODS: One hundred forty subjects received either a 0.59-mg FA intravitreal implant (n = 66) or standard of care (SOC; n = 74) with either systemic prednisolone or equivalent corticosteroid as monotherapy (> or =0.2 mg/kg daily) or, if judged necessary by the investigator, combination therapy with an immunosuppressive agent plus a lower dose of prednisolone or equivalent corticosteroid (> or =0.1 mg/kg daily). MAIN OUTCOME MEASURES: Time to first recurrence of uveitis. RESULTS: Eyes that received the FA intravitreal implant experienced delayed onset of observed recurrence of uveitis (P<0.01) and a lower rate of recurrence of uveitis (18.2% vs. 63.5%; P< or =0.01) compared with SOC study eyes. Adverse events frequently observed in implanted eyes included elevated intraocular pressure (IOP) requiring IOP-lowering surgery (occurring in 21.2% of implanted eyes) and cataracts requiring extraction (occurring in 87.8% of phakic implanted eyes). No treatment-related nonocular adverse events were observed in the implant group, whereas such events occurred in 25.7% of subjects in the SOC group. CONCLUSIONS: The FA intravitreal implant provided better control of inflammation in patients with uveitis compared with systemic therapy. Intraocular pressure and lens clarity of implanted eyes need close monitoring in patients receiving the FA intravitreal implant.

Down-regulation of interferon signature in systemic lupus erythematosus patients by active immunization with interferon α-kinoid.

OBJECTIVE: We developed interferon-α-kinoid (IFN-K), a drug composed of inactivated IFNα coupled to a carrier protein, keyhole limpet hemocyanin. In human IFNα-transgenic mice, IFN-K induces polyclonal antibodies that neutralize all 13 subtypes of human IFNα. We also previously demonstrated that IFN-K slows disease progression in a mouse model of systemic lupus erythematosus (SLE). This study was undertaken to examine the safety, immunogenicity, and biologic effects of active immunization with IFN-K in patients with SLE. METHODS: We performed a randomized, double-blind, placebo-controlled, phase I/II dose-escalation study comparing 3 or 4 doses of 30 μg, 60 μg, 120 μg, or 240 μg of IFN-K or placebo in 28 women with mild to moderate SLE. RESULTS: IFN-K was well tolerated. Two SLE flares were reported as serious adverse events, one in the placebo group and the other in a patient who concomitantly stopped corticosteroids 2 days after the first IFN-K dose, due to mild fever not related to infection. Transcriptome analysis was used to separate patients at baseline into IFN signature-positive and -negative groups, based on the spontaneous expression of IFN-induced genes. IFN-K induced anti-IFNα antibodies in all immunized patients. Notably, significantly higher anti-IFNα titers were found in signature-positive patients than in signature-negative patients. In IFN signature-positive patients, IFN-K significantly reduced the expression of IFN-induced genes. The decrease in IFN score correlated with the anti-IFNα antibody titer. Serum complement C3 levels were significantly increased in patients with high anti-IFNα antibody titers. CONCLUSION: These results show that IFN-K is well tolerated, immunogenic, and significantly improves disease biomarkers in SLE patients, indicating that further studies of its clinical efficacy are warranted.

Consistency of safety and efficacy of new oral anticoagulants across subgroups of patients with atrial fibrillation.

AIMS: The well-known limitations of vitamin K antagonists (VKA) led to development of new oral anticoagulants (NOAC) in non-valvular atrial fibrillation (NVAF). The aim of this meta-analysis was to determine the consistency of treatment effects of NOAC irrespective of age, comorbidities, or prior VKA exposure. METHODS AND RESULTS: All randomized, controlled phase III trials comparing NOAC to VKA up to October 2012 were eligible provided their results (stroke/systemic embolism (SSE) and major bleeding (MB)) were reported according to age (≤ or >75 years), renal function, CHADS2 score, presence of diabetes mellitus or heart failure, prior VKA use or previous cerebrovascular events. Interactions were considered significant at p <0.05. Three studies (50,578 patients) were included, respectively evaluating apixaban, rivaroxaban, and dabigatran versus warfarin. A trend towards interaction with heart failure (p = 0.08) was observed with respect to SSE reduction, this being greater in patients not presenting heart failure (RR = 0.76 [0.67-0.86]) than in those with heart failure (RR = 0.90 [0.78-1.04]); Significant interaction (p = 0.01) with CHADS2 score was observed, NOAC achieving a greater reduction in bleeding risk in patients with a score of 0-1 (RR 0.67 CI 0.57-0.79) than in those with a score ≥2 (RR 0.85 CI 0.74-0.98). Comparison of MB in patients with (RR 0.97 CI 0.79-1.18) and without (RR 0.76 CI 0.65-0.88) diabetes mellitus showed a similar trend (p = 0.06). No other interactions were found. All subgroups derived benefit from NOA in terms of SSE or MB reduction. CONCLUSIONS: NOAC appeared to be more effective and safer than VKA in reducing SSE or MB irrespective of patient comorbidities. Thromboembolism risk, evaluated by CHADS2 score and, to a lesser extent, diabetes mellitus modified the treatment effects of NOAC without complete loss of benefit with respect to MB reduction.

Síntese de 1,3,5-triazinas substituídas e avaliação da toxicidade frente a Artemia Salina leach

The synthesis of ten symmetrically and unsymmetrically substituted 1,3,5-triazines by Phase Transfer Catalysis (PTC) method is described. Their toxicities were determined against Artemia salina Leach. The LD50 values have also been obtained for these compounds.

O efeito do ultra-som em reações químicas

Unusual chemical phenomenon associated with ultrasound is on account of cavitation effect. The ultrasound increase the rate and yield of chemical reaction on account of its ability to emulsify liquids. When the ultrasound is used in metallic catalyst reaction the activity of catalyst is increased because the ultrasound clean the surface of catalyst. Sonogels have a fine porosity and large specific surface improving different properties. This paper deals with ultrasound phenomenon and gives some examples of reactions and properties where this radiation takes an important role.

Catálise de transferência de fase

Since its discovery, phase transfer catalysis (PTC) has grown considerably and nowadays is one of the most versatile preparative methods. The search for new catalysts, their use in PTC asymmetric synthesis and the attempts to understand their mechanistic role are modern and exciting topics of investigation. A review on main achievements in the last two decades is presented.

Fotodegradación heterogénea de bisfenol A en agua con dióxido de titanio

Bisphenol A (BPA) is a monomer used in epoxy resin and polycarbonate manufacture. This molecule is considered as an endocrine disruptor that causes different diseases. The human exposition to this non biodegrable substance is increasing in the time; in particular, water is contaminated by industrial remainder flow. In this article heterogeneous photo degradation of a solution of BPA in water solution using a catalytic photo reactor with UV light and titanium dioxide (TiO2) was evaluated. High performance liquid chromatography (HPLC) was used to analyze the photo degradation of BPA solutions. The influence of titanium dioxide amount, BPA concentration, reaction temperature and the catalyst state like suspension and immobilized were also determinated. The highest elimination of BPA was 83.2%, in 240 min, beginning with 0.05 mM of BPA and 100 mg/L of TiO2 in suspension.

Iodeto de potássio suportado em peneiras moleculares mesoporosas (SBA-15 e MCM-41) como catalisador básico para síntese de biodiesel

Iodide potassium incorporated on mesoporous molecular sieves (SBA-15 and MCM-41) was used as heterogeneous catalysts in the transesterification of sunflower oil under different conditions of reaction time and ratio catalyst/oil (w/w). The results have showed that the system supported in SBA-15 has been more active than the supported in MCM-41, promoting a conversion to methyl esters of 84.98%.

Selective inhibition of human tankyrases

Tankyrases belong to the Diphtheria toxin-like ADP-ribosyltransferase (ARTD) enzyme superfamily, also known as poly(ADP-ribose) polymerases (PARPs). They catalyze a covalent post-translational modification reaction where they transfer ADP-ribose units from NAD+ to target proteins. Tankyrases are involved in many cellular processes and their roles in telomere homeostasis, Wnt signaling and in several diseases including cancers have made them interesting drug targets. In this thesis project, selective inhibition of human tankyrases was studied. A homogeneous fluorescence-based assay was developed to screen the compound libraries. The assay is inexpensive, operationally easy, and performs well according to the statistical analysis. Assay suitability was confirmed by screening a natural product library. Flavone was identified as the most potent inhibitor in the library and this motivated us to screen a larger flavonoid library. Results showed that flavones were indeed the best inhibitor of tankyrases among flavonoids. To further study the structure-activity relationship, a small library of flavones containing single substitution was screened and potency measurements allowed us to generate structure-activity relationship. Compounds containing substitutions at 4´-position were more potent in comparison to other substitutions, and importantly, hydrophobic groups improved isoenzyme selectivity as well as the potency. A flavone derivative containing a hydrophobic isopropyl group (compound 22), displayed 6 nM potency against TNKS1, excellent isoenzyme selectivity and Wnt signaling inhibition. Protein interactions with compounds were studied by solving complex crystal structures of the compounds with TNKS2 catalytic domain. A novel tankyrase inhibitor (IWR-1) was also crystallized in complex with TNKS2 catalytic domain. The crystal structure of TNKS2 in complex with IWR-1 showed that the compound binds to adenosine site and it was the first known ARTD inhibitor of this kind. To date, there is no structural information available about the substrate binding with any of the ARTD family members; therefore NAD+ was soaked with TNKS2 catalytic domain crystals. However, analysis of crystal structure showed that NAD+ was hydrolyzed to nicotinamide. Also, a co-crystal structure of NAD+ mimic compound, EB-47, was solved which was used to deduce some insights about the substrate interactions with the enzyme. Like EB-47, other ARTD1 inhibitors were also shown to inhibit tankyrases. It indicated that selectivity of the ARTD1 inhibitors should be considered as some of the effects in cells could come from tankyrase inhibition. In conclusion, the study provides novel information on tankyrase inhibition and presents new insight into the selectivity and potency of compounds.

Electrospinning and characterization of self-assembled inclusion complexies

L’électrofilage est une technique permettant de fabriquer des fibres polymériques dont le diamètre varie entre quelques nanomètres et quelques microns. Ces fibres ont donc un rapport surface/volume très élevé. Les fibres électrofilées pourraient trouver des applications dans le relargage de médicaments et le génie tissulaire, comme membranes et capteurs chimiques, ou dans les nanocomposites et dispositifs électroniques. L’électrofilage était initialement utilisé pour préparer des toiles de fibres désordonnées, mais il est maintenant possible d’aligner les fibres par l’usage de collecteurs spéciaux. Cependant, il est important de contrôler non seulement l’alignement macroscopique des fibres mais aussi leur orientation au niveau moléculaire puisque l’orientation influence les propriétés mécaniques, optiques et électriques des polymères. Les complexes moléculaires apparaissent comme une cible de choix pour produire des nanofibres fortement orientées. Dans les complexes d’inclusion d’urée, les chaînes polymères sont empilées dans des canaux unidimensionnels construits à partir d’un réseau tridimensionnel de molécules d’urée liées par des ponts hydrogène. Ainsi, les chaînes polymère sonts très allongées à l’échelle moléculaire. Des nanofibres du complexe PEO-urée ont été préparées pour la première fois par électrofilage de suspensions et de solutions. Tel qu’attendu, une orientation moléculaire inhabituellement élevée a été observée dans ces fibres. De tels complexes orientés pourraient être utilisés à la fois dans des études fondamentales et dans la préparation de matériaux hiérarchiquement structurés. La méthode d’électrofilage peut parfois aussi être utilisée pour préparer des matériaux polymériques métastables qui ne peuvent pas être préparés par des méthodes conventionnelles. Ici, l’électrofilage a été utilisé pour préparer des fibres des complexes stables (α) et "métastables" (β) entre le PEO et l’urée. La caractérisation du complexe β, qui était mal connu, révèle un rapport PEO:urée de 12:8 appartenant au système orthorhombique avec a = 1.907 nm, b = 0.862 nm et c = 0.773 nm. Les chaînes de PEO sont orientées selon l’axe de la fibre. Leur conformation est significativement affectée par les ponts hydrogène. Une structure en couches a été suggérée pour la forme β, plutôt que la structure conventionnelle en canaux adoptée par la forme α. Nos résultats indiquent que le complexe β est thermodynamiquement stable avant sa fonte et peut se transformer en forme α et en PEO liquide par un processus de fonte et recristallisation à 89 ºC. Ceci va dans le sens contraire aux observations faites avec le complexe β obtenu par trempe du complexe α fondu. En effet, le complexe β ainsi obtenu est métastable et contient des cristaux d’urée. Il peut subir une transition de phases cinétique solide-solide pour produire du complexe α dans une vaste gamme de températures. Cette transition est induite par un changement de conformation du PEO et par la formation de ponts hydrogène intermoléculaires entre l’urée et le PEO. Le diagramme de phases du système PEO-urée a été tracé sur toute la gamme de compositions, ce qui a permis d’interpréter la formation de plusieurs mélanges qui ne sont pas à l’équilibre mais qui sont été observés expérimentalement. La structure et le diagramme de phases du complexe PEO-thiourée, qui est aussi un complexe très mal connu, ont été étudiés en détail. Un rapport molaire PEO :thiourée de 3:2 a été déduit pour le complexe, et une cellule monoclinique avec a = 0.915 nm, b = 1.888 nm, c = 0.825 nm et β = 92.35º a été déterminée. Comme pour le complexe PEO-urée de forme β, une structure en couches a été suggérée pour le complexe PEO-thiourée, dans laquelle les molécules de thiourée seraient disposées en rubans intercalés entre deux couches de PEO. Cette structure en couches pourrait expliquer la température de fusion beaucoup plus faible des complexes PEO-thiourée (110 ºC) et PEO-urée de forme β (89 ºC) en comparaison aux structures en canaux du complexe PEO-urée de forme α (143 ºC).

Direct functionalization of heterocyclic and non-heterocyclic arenes

L’application des métaux de transition à la fonctionnalisation directe a ouvert la voie à une nouvelle classe de réactions pour la formation de liens carbone-carbone. De par l'omniprésence des liaisons C–H, l’introduction de nouvelles fonctionnalités chimiques par voie directe et pré-activation minimale s’impose comme une stratégie de synthèse très attrayante. Ainsi, il est envisageable de préparer de manière rapide et efficace des supports complexes menant à des molécules complexes, qui pourraient être utiles dans divers domaines de la chimie. L'objectif principal de la présente thèse vise la fonctionnalisation directe des arènes hétérocycliques et non hétérocycliques et, plus précisément, les techniques d’arylation. Dans un premier temps, nous allons aborder le thème de l’arylation directe tout en mettant l’accent sur les pyridines (Chapitre 1). Ces molécules sont à la base d'une multitude de composés biologiquement actifs et jouent un rôle important dans le domaine des sciences des matériaux, de l’agrochimie et de la synthèse des produits naturels. Dans un deuxième temps, nous discuterons de nos travaux sur l’arylation directe catalysé par un complex de palladium sur des ylures de N-iminopyridinium en soulignant la dérivatisation du sel de pyridinium après une phénylation sp2 (Chapitre 2). L’étude de ce procédé nous a permis de mettre en lumière plusieurs découvertes importantes, que nous expliquerons en détails une à une : l’arylation benzylique directe lorsque des ylures N-iminopyridinium substituées avec un groupement alkyl à la position 2 sont utilisés comme partenaires dans la réaction; les allylations Tsuji-Trost catalysée par un complex de palladium; et l’alkylation directe et sans métal via une catalyse par transfert de phase. Plusieurs défis restent à relever pour le développement de procédés directs utilisant des métaux de transition peu coûteux, d’autant plus que la synthèse par transformation directe des pyridines 2-alcényles, lesquelles sont pertinentes sur le plan pharmacologique, n’a pas encore été rapportée à ce jour. Avec cette problématique en tête, nous avons réussi à mettre au point une alcénylation directe catalysé par un complex de cuivre sur des ylures de N-iminopyridinium. Nous discuterons également d’une nouvelle méthode pour la préparation des iodures de vinyle utilisés dans les couplages. Ces réactions sont non seulement remarquablement chimiosélectives, mais sont aussi applicables à plusieurs substrats (Chapitre 3). En optimisant ce procédé direct, nous avons découvert une façon unique de synthétiser les pyrazolo[1,5-a]pyridines 2-substituées (Chapitre 4). Le mécanisme global met en jeu une séquence tandem de fonctionnalisation-cyclisation directe et un procédé direct en cascade, qui n’avais jamais été rapporté. Cela simplifie ansi la synthèse autrement compliquée de ces substrats en y apportant une solution à un problème de longue date. Dans les deux derniers chapitres, nous examinerons en détail les techniques d’arylation directe qui n'impliquent pas les partenaires de couplage hétérocycliques. Entre autres, au Chapitre 5, nous soulignerons notre découverte d’un umpolung dirigé et catalysé par un complexe de palladium du benzène et de quelques autres dérivés arènes. Il s’agit là du premier cas de fonctionnalisation directe dans laquelle le groupe directeur se trouve sur le partenaire halogène et il s’ajoute à la courte liste d’exemples connus dans la littérature rapportant une arylation directe du benzène. Finalement, au Chapitre 6, nous passerons en revue une nouvelle arylation directe catalysée au fer, qui se veut un procédé peu coûteux, durable et présentant une économie d’atomes. Nous discutons des substrats possibles ainsi des études mécanistiques réalisés.

Iron Promoted Sulphated Zirconia Systems as Efficient Catalysts for Phenol Hydroxylation

The present work investigates on the applicability of metal promoted sulphated zirconia catalysts for the hydroxylation of phenol under mild conditions. The percentage conversion and product distribution was highly sensitive towards the reaction parameters like the catalyst composition, reaction temperature, H202/ phenol ratio and the solvent used.

Acetalization of ketones on K-10 clay and rare earth exchanged HFAU-Y zeolites: A mild and facile procedure for the synthesis of dimethylacetals

Dimethylacetals of ketones; cyclohexanone, acetophenone, and benzophenone have been prepared by reacting ketones with methanol under mild reaction conditions. Large pore zeolites (H-Y and its rare earth metal, Ce3+, La3+, and RE3+ modified forms), and mesoporous clay (K-10 montmorillonite and its cerium exchanged counterpart) with regular pore structure, silica and silica-alumina have been used as catalysts. Clay catalysts are found to be much more active than zeolites, thanks to slightly bigger pore size. The nature of the pores of the solid acid catalysts determine acetalization efficiency of a particular catalyst. As evidenced by the reaction time studies, the catalyst decay is greater over the zeolites than over the clays. Carrying out the reaction with ketones of different molecular sizes it is shown that K-10 clays and rare earth exchanged H-Y zeolites are promising environmentally friendly catalysts for their use in the production fine chemicals.

Effect of pore size on the catalytic activities of K-I 0 clay and H-zeolites for the acetalization of ketones with methanol

One-pot acetalizations of cyclohexanone. acetophenone and benzophenone were carried out using methanol over H-montmorillonite clay (a mesoporous material). silica, alumina, and different zeolites such as HFAU-Y.HBeta, H-ZSM-5, and H-mordenite. In all the cases a single product-the corresponding dimethylacetal-was obtained in high yields. Hemiacetal formation was not observed with any catalyst. A comparison of catalytic activity indicated that montmorillonite K-10 is the most active catalyst for the reaction. As evidenced by the reaction time studies, the catalyst decay is greater over the zeolite catalyst than over the clay.