Effect of chloral hydrate on metabolic rate of Labeo rohita (Ham) and Poecilia reticulata (Peters)

Comparative impact of chloral hydrate anaesthesia on the metabolic rate of Indian major carp Labeo rohita and larvivorous fish Poecilia reticulata was assessed. Observation on the Oxygen Consumption Rate (OCR) revealed that in common guppies OCR was substantially low (1.105 and 1.097 mg/g/hr) at 0.1 and 0.25 g/l concentrations of chloral hydrate as against OCR of 1.487 mg/g/hr in the control. Fry of L. rohita in group showed lower metabolic rates in the control as well as treated conditions as compared to the individuals of this fish. This may be due to sympathetic psychophysiological reflex of grouped fish. Higher dose of chloral hydrate (0.25 g/l) also caused higher OCR probably due to distress. Application of chloral hydrate also favoured lesser release of metabolic wastes (ammonia and carbon dioxide). There was significant positive correlation between time and oxygen consumption, whereas, for time and OCR this relationship was negative. Regression of chloral hydrate doses for OCR and time has also been calculated.

Comparative account of growth rate of body parts with total length in adult Puntius sarana (Ham.)

The present study on growth rate of different body parts in relation to total length, in the male and female Puntius sarana (Ham.) did not show any significant heterogeneity except in snout length (p.01). The growth rate of snout length was found to be higher in females (b=0.0377) than in males (b=0.0266). Since the growth rate of most of the body parts was found to be homogeneous in both the sexes, the common regression co-efficient "b" was calculated on pooled data to represent the growth rate of different body parts against total length, the linearity of regression lines indicated isometric growth.

Comparative account of growth rate of body parts with total length in Rita pavimentata (Gunther)

The paper deals with sex-wise growth rate of different body parts in relation to total length in Rita paviinentata (Gunther). Growth rates calculated on pooled data by using the common regression coefficient 'b' reveals isometric and homogeneous nature in sexes.

Studies on the preparation of fish silage. 2. Rate of liquefaction in different parts of silver belly

An experiment was undertaken to determine from which part of silver belly (Leiognathus splendens) carcasses originate the autolytic enzymes responsible for liquefaction of silage. Findings show that it is important to leave head and viscera present in order to get a satisfactory liquefaction in silage prepared from silver belly using 3.5% formic acid. The storage life of silage produced from various parts of the fish carcasses is also discussed.

Diel feeding patterns, rate of gastric evacuation and foods of Indian sandwhiting, Sillago sihama in Mulki estuary, west coast of India

Diel feeding chronology of sandwhiting, Sillago sihama was examined from stomach collections taken during the months of April, July and December'99 in Mulki estuary along Dakshina Kannada coast, India. Significant differences in mean stomach content weight were found between several consecutive 3 hour periods with peak fullness occurring in early morning and evening hours. The rate of gastric evacuation of natural food (crustacea, polychaetes and fish) was measured in the field was best described by an exponential model, with an estimated evacuation time of 8.0 h at a temperature of 28.5 ± 1.2°C. Stomach content analysis indicated that this species is a carnivore on a wide range of benthic, epibenthic and planktonic prey. The principal food items of S. sihama were crustaceans, polychaetes and fish. Fishes less than 100 mm TL preferred mainly crustaceans while larger ones depends on polychaetes, crustaceans and fish. The feeding activity of S. sihama was influenced by tidal cycle.

Application of the fixed point method for solution in time stepping finite element analysis using the inverse vector Jiles-Atherton model

An implementation of the inverse vector Jiles-Atherton model for the solution of non-linear hysteretic finite element problems is presented. The implementation applies the fixed point method with differential reluctivity values obtained from the Jiles-Atherton model. Differential reluctivities are usually computed using numerical differentiation, which is ill-posed and amplifies small perturbations causing large sudden increases or decreases of differential reluctivity values, which may cause numerical problems. A rule based algorithm for conditioning differential reluctivity values is presented. Unwanted perturbations on the computed differential reluctivity values are eliminated or reduced with the aim to guarantee convergence. Details of the algorithm are presented together with an evaluation of the algorithm by a numerical example. The algorithm is shown to guarantee convergence, although the rate of convergence depends on the choice of algorithm parameters. © 2011 IEEE.

Investigations on wooden floating materials: the loss of buoyancy under continuous immersion in water and the rate of its redemption by drying

A wooden fishing float under immersion in water for long periods is liable to absorb water, the quantity of water absorbed possibly being dependent upon the physical factors like the specific gravity and the inherent property of the material, the time of soaking and the pressure acting on it. Consequently a wooden float is likely to become heavy and loss its original buoyancy. However, when the float is removed from water and dried, the lost buoyancy is regained on complete drying. The present paper is an attempt to elucidate these two important characteristics of some of the chief wooden floating materials used on the West Coast of India.

Rate of filtration by Perna viridis pre-exposed to heavy metals

Perna viridis exposed to different concentrations of copper and zinc for varying periods and then the rate of filtration estimated under metal free culture conditions. The concentrations under which the animals were maintained before the experiments were 0.025 to 0.150 p.p.m. of zinc and 0.005 to 0.08 p.p.m. of copper.

Relationship between diet composition and growth rate of the zoeal and mysis stages of Penaeus japonicus Bate

Diets containing Chaetoceros gracilis plus Artemia nauplii artificially prepared diet, Diet-B, and two commercial feeds Tapes and mysid meals, were fed to larvae of P. japonicus. Highest survival rate was obtained when larvae were fed with Diet-B. The results show that the early larval stages of P. japonicus can be reared on artificially prepared diets. Since the chemical composition of the diet is known, it can be used as supplemental data for larval feeding development and nutritional requirement studies for the early larval stages of Penaeus japonicus and/or other penaeids. Information is tabulated on feeds and feeding rates used, composition of the artificial diet, fatty acid composition of lipids of the different diets, and of the sterols of the different diets.

High rate of chimeric gene origination by retroposition in plant genomes

Retroposition is widely found to play essential roles in origination of new mammalian and other animal genes. However, the scarcity of retrogenes in plants has led to the assumption that plant genomes rarely evolve new gene duplicates by retroposition, de

Evaluation and comparison of ozone, hydrogen peroxide and physical treatment on fungal infection prevention and hatching rate of Iranian sturgeon (Acipenser persicus)

Ozone due to having low half-life and devoid of environmental harmful effects is recognized as one of the most effective disinfectant and fungicide in aquaculture. The objective of this study is to consider the effects of periodicay ozonation, hydrogen peroxide treatment, and physical treatment capability in hatching rate enhancement. Three concentrations of 0.05, 0.1 and 0.15 ppm ozone (10 min) and peroxide hydrogen with dose of 500 and 1000 ppm in two procedures accompanied with physical treatment and without physical treatment were examined on hatching rate. In the first year, Egg ozonation (0.1 ppm) with physical treatment have been resulted the greatest hatching rate (81.4%). In the second year, egg treatment with 1000 ppm hydrogen peroxide with physical treatment have been showed the greatest hatching rate (78%). Average hatching rate for the blank control treatment (without disinfectin and physical treatment) was 32.7%. From the economic viewpoint, 0.05 ppm ozone with physical treatment, due to considerable minimizing at consumption energy and ozonation system retention costs, indicated as the best treatment than other ozone treatments for fungal control. Very low correlation (r=-0.14) have been observed between hatchery water temperature and fungal infection percentage in control treatment.

Effect of particle concentration on erosion rate of mild steel bends in a pneumatic conveyor

Particle concentration is known as a main factor that affects erosion rate of pipe bends in pneumatic conveyors. With consideration of different bend radii, the effect of particle concentration on weight loss of mild steel bends has been investigated in an industrial scale test rig. Experimental results show that there was a significant reduction of the specific erosion rate for high particle concentrations. This reduction was considered to be as a result of the shielding effect during the particle impacts. An empirical model is given. Also a theoretical study of scaling on the shielding effect, and comparisons with some existing models, are presented. It is found that the reduction in specific erosion rate (relative to particle concentration) has a stronger relationship in conveying pipelines than has been found in the erosion tester. © 2004 Elsevier B.V. All rights reserved.

Estimation of the natural purification rate of a eutrophic lake after pollutant removal

Pollution resulting from increased human activities is threatening Lake Donghu, its effects being characterized by serious eutrophication. A steady increase of phosphorus loading is the most important factor of the lake eutrophication. Pollution external control projects are being implemented and will be accomplished before the year 2010. In order to predict the restoration rate by the lake's self-purification after the projects of external control, a model of predicting the removal rate of total phosphorus (TP) from lake water is developed, and a brief method of estimating the release and export rate of sediment phosphorus is suggested. Results show that, on the premise of external loading fully controlled. The restoration needs about 55 years or more. Obviously, the great P pool in the sediment will be a limiting factor of preventing the improvement of water quality after the external loading is under control. Based on the estimation we conclude that after the external control projects before 2010, in order to restore the lake in a few years, although highly cost, the first step must be the sediment dredging to remove internal loading. The second step is diverting water of River Changjiang into the lake to accelerate the improvement of lake water. Otherwise, removal of pollutant sources will become meaningless. (c) 2006 Elsevier B.V. All rights reserved.