Effects of hatchery shading and nest depth on the development and quality of Chelonia mydas hatchlings: implications for hatchery management in Peninsular, Malaysia

One of the decisions made by hatchery managers around the world is what degree of shading and nest depth are required to maximise the production of high-quality hatchlings at optimal sex ratios. The primary objectives of this study were to determine the effects of (1) hatchery shading and nest depth on nest temperatures and emergence lag, and (2) nest temperatures and nest depth on hatchling sex ratio and quality. In 2001, 26 Chelonia mydas clutches from Ma'Daerah beach, Terengganu, Malaysia, were relocated alternatively at depths of 50 cm and 75 cm into a 70%-shaded and a 100%-shaded hatchery. Data loggers were placed into the centre of each relocated clutch to record the temperature every hour over the course of incubation. When the hatchlings emerged, a sample of the clutch was run, measured and weighed and a separate sample was examined histologically for sex characteristics. Nest temperatures ranged between 28 degrees C and 30 degrees C and generally showed increases over the second half of incubation due to metabolic heating of the clutch. There was no significant correlation found between nest temperature and any of the hatchling parameters measured. Hatchlings from 75-cm-deep nests had a longer emergence lag (46.4 (+/- 10.2) h) than hatchlings from 50-cm-deep nests. Hatch and emergence success were similar to those of natural populations and hatchling sex ratios were male dominant, with an average of 72% males. There was a poor correlation between mean middle-third incubation temperatures and sex ratio. Hatchlings from 75-cm-deep nests had similar running speeds but lower condition index than their conspecifics from 50-cm-deep nests.

Data quality initiatives - striving for continuous improvements

Although managers consider accurate, timely, and relevant information as critical to the quality of their decisions, evidence of large variations in data quality abounds. Over a period of twelve months, the action research project reported herein attempted to investigate and track data quality initiatives undertaken by the participating organisation. The investigation focused on two types of errors: transaction input errors and processing errors. Whenever the action research initiative identified non-trivial errors, the participating organisation introduced actions to correct the errors and prevent similar errors in the future. Data quality metrics were taken quarterly to measure improvements resulting from the activities undertaken during the action research project. The action research project results indicated that for a mission-critical database to ensure and maintain data quality, commitment to continuous data quality improvement is necessary. Also, communication among all stakeholders is required to ensure common understanding of data quality improvement goals. The action research project found that to further substantially improve data quality, structural changes within the organisation and to the information systems are sometimes necessary. The major goal of the action research study is to increase the level of data quality awareness within all organisations and to motivate them to examine the importance of achieving and maintaining high-quality data.

Outcomes of service encounter quality in a business-to-business context

Service encounter quality is an area of growing interest to researchers and managers alike, yet little is known about the effects of face-to-face service encounter quality within a business-to-business setting. In this paper, a psychometrically sound measure of such service encounter quality is proposed, and consequences of this construct are empirically assessed. Both a literature review and a dyadic in-depth interview approach were used to develop a conceptual framework and a pool of items to capture service encounter quality. A mail survey of customers was undertaken, and a response rate of 36% was obtained. Data analysis was conducted via confirmatory factor analysis and structural equation modeling. Findings reveal a four-factor structure of service encounter quality, encompassing professionalism, civility, friendliness and competence dimensions. Service encounter quality was found to be directly related to customer satisfaction and service quality perceptions, and indirectly to loyalty. The importance of these findings for practitioners and for future research on service encounter quality is discussed.

The quality of sales manager:salesperson exchanges perspective under problem resolution conditions

Building on social exchange theory and qualitative inquiry, managerial responsiveness, caring, and aggressiveness were uncovered as three key social exchange dimensions used by sales managers when dealing with problem situations in the salesforce. We used Australian data to develop measures of these three constructs. Results of the development process indicate that the measures show good validity. Further to this, we also provide examination of the relationship of the three exchange dimensions with key organizational outcomes. Overall the findings suggest that the three constructs are important in sales manager problem resolution exchanges, and that they may ultimately influence the success of sales organizations.

Quality improvement in professional local government services : a longitudinal study

This sustained longitudinal study, carried out in a single local authority, investigates the implementation of a Total Quality Management (TQM) philosophy in professional local government services. At the start of this research, a large majority of what was written about TQM was polemical and based on limited empirical evidence. This thesis seeks to provide a significant and important piece of work, making a considerable contribution to the current state of knowledge in this area. Teams from four professional services within a single local authority participated in this research, providing the main evidence on how the quality management agenda in a local authority can be successfully implemented. To supplement this rich source of data, various other sources and methods of data collection have been used: 1) Interviews were carried out with senior managers from within the authority; 2) Customer focus groups and questionnaires were used; 3) Interviews were carried out with other organisations, all of which were proponents of a TQM philosophy. A number of tools have been developed to assist in gathering data: 1) The CSFs (critical success factors) benchmarking tool; 2) Five Stages of Quality Improvement Model. A Best Practice Quality Improvement Model, arising from an analysis of the literature and the researcher's own experience is proposed and tested. From the results a number of significant conclusions have been drawn relating to: 1) Triggers for change; 2) Resistance of local government professionals to change 3) Critical success factors and barriers to quality improvement in professional local government services; 4) The problems associated with participant observation and other methodological issues used.

Designing a safety management support system using open architecture databases: the requirements of information representation in the support of managers' risk-related decision-making

This research was conducted at the Space Research and Technology Centre o the European Space Agency at Noordvijk in the Netherlands. ESA is an international organisation that brings together a range of scientists, engineers and managers from 14 European member states. The motivation for the work was to enable decision-makers, in a culturally and technologically diverse organisation, to share information for the purpose of making decisions that are well informed about the risk-related aspects of the situations they seek to address. The research examined the use of decision support system DSS) technology to facilitate decision-making of this type. This involved identifying the technology available and its application to risk management. Decision-making is a complex activity that does not lend itself to exact measurement or precise understanding at a detailed level. In view of this, a prototype DSS was developed through which to understand the practical issues to be accommodated and to evaluate alternative approaches to supporting decision-making of this type. The problem of measuring the effect upon the quality of decisions has been approached through expert evaluation of the software developed. The practical orientation of this work was informed by a review of the relevant literature in decision-making, risk management, decision support and information technology. Communication and information technology unite the major the,es of this work. This allows correlation of the interests of the research with European public policy. The principles of communication were also considered in the topic of information visualisation - this emerging technology exploits flexible modes of human computer interaction (HCI) to improve the cognition of complex data. Risk management is itself an area characterised by complexity and risk visualisation is advocated for application in this field of endeavour. The thesis provides recommendations for future work in the fields of decision=making, DSS technology and risk management.

Reflections on assessing academic quality in marketing, and the UK REF

Purpose – The purpose of this editorial is to comment on the paper by Saunders and Wong in this issue. In doing so, the paper reflects on the notion of academic quality within marketing research, along with the systems in place to evaluate and reward it. Design/methodology/approach – The paper takes a reflective, discursive approach. Findings – The author finds that, while Saunders and Wong make a number of pertinent observations, and come up with interesting solutions, the notion of academic quality espoused in their paper is based on a logically flawed set of arguments. Research limitations/implications – The paper is primarily a personal view, and thus does not rely on any empirical research. Practical implications – There are key implications for many parties involved in the creation and assessment of marketing knowledge. In particular, scholars would be well advised to consider notions of quality in relation to their own work, rather than rely unquestioningly on existing definitions. Policy makers and research managers (e.g. business school deans) also need to consider what quality in academic research really is, and how to appropriately direct and reward it. Originality/value – The paper provides another perspective on the well-established debate regarding quality, and thus it is hoped will stimulate further thinking.

Internet banking service quality:an investigation of interrelationships between construct dimensions

Service quality measurement in Internet banking services is an area of growing interest to researchers and managers. This research investigates the interrelationships between the dimensions comprising the Internet banking service quality construct through structural equation modelling. Five Internet service quality dimensions are identified: access, web interface, trust, attention and credibility. Credibility is modelled as an outcome of the causal variables of access, web interface, trust and attention. Trust and attention emerges as key dimensions in explaining the credibility dimension. Access is found to be a common antecedent of trust, attention and Web interface dimensions. Implications from the findings are offered.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.

Postgraduate study and managers' subsequent work experience:an exploratory evaluation

Drawing on an exploratory qualitative study, this article considers the link between business school teaching at graduate level and subsequent work behaviour and experiences of former students. It evaluates the student experience some time after graduation. The findings of the retrospective evaluation point to the value of classroom peer discussion, the testing of ideas against prior work experience and the opportunity to make sense of organisational issues by setting them into broader context. The importance of andragogical approaches to teaching is discussed as well as the implications of the study findings for teaching quality enhancement. © 2009 Taylor & Francis.

Giving whistleblowers greater protection:improving quality of care

This year, an independent review of whisleblowing in the NHS made recommendations as to how whistleblowers could be given greater protection. The review, chaired by Sir Robert Francis, intended to improve the quality of patient care and safety in the health service. But with many practitioners remaining unregulated, there are unanswered questions as to how reports of mistakes can be properly investigated and the necessary action taken against incompetent or negligent practitioners. Amanda Casey, Chair of the Registration Council for Clinical Physiologists, makes the case for regulation of professionals whose work poses potential risks to patients and can place healthcare managers in an invidious position.

Vezetőkkel szemben támasztott munkaerő-piaci kompetenciaelvárások a Heti Világgazdaság és a The Economist álláshirdetéseinek elemzése alapján (Job market competency requirements for managers on the basis of the analysis of job advertisements in the Heti Világgazdaság and The Economist)

A szervezet dolgozói között kiemelt fontosságúak a vezetők, hiszen döntéseikkel, működésükkel a szervezet életét közvetlenül, és sokszor hosszú távra befolyásolják. Annak a vállalatnak, mely megtartani, növelni szeretné piaci pozícióját, különös hangsúlyt kell fektetnie vezetőinek kiválasztására, a későbbiekben pedig fejlesztésére. A szerző cikkében azt mutatja be, hogy a közgazdászképzettséggel rendelkező vezetők iránti munkaerő-piaci kereslet (a HVG-hirdetések elemzése alapján) milyen minőségi jellemzőket mutatott 2000–2009 között. A szerző részletesen ismerteti az eredményeket, melyek értelmezéséhez a Spencer és munkatársai által kidolgozott kompetenciamodell saját továbbfejlesztett változatát használja fel. Kitekintés céljával a magyar eredmények mellett bemutatja, hogy egy más gazdasági struktúrával, kultúrával rendelkező országban hogyan alakultak a vezetőkkel szemben támasztott kompetencia-elvárások. Az eredmények – melyeket más hazai felmérések is alátámasztanak – azt tükrözik, hogy a magyar vezetőkkel szemben támasztott munkaerő-piaci kompetencia-elvárások eltérnek a szakmai várakozásoktól és élesen eltérő képet mutatnak a The Economist hirdetéselemzésének eredményétől. _________ The thesis that the most important factor which determines the competitiveness of future companies is the quality of human resources has received increasingly more emphasis in the literature on management. The managers of organizations have a key role since they can directly influence the life of the organization by their decisions and work, often for a long term. Therefore, a company which intends to maintain or improve its market position should place special emphasis on the selection, and later on the development of its managers. In the present paper the author presents the characteristic features of job market demand for managers with qualifications in economics between 2000 and 2009 (on the basis of the analysis of job advertisements published in the economic weekly paper Heti Világgazdaság). The author gives a detailed analysis of the results using the competence model developed by Spencer et al. and further developed by the author. In addition to the Hungarian results, the paper also provides an overview of how managers are selected in a country with a different economic structure and culture. The results – also supported by other surveys conducted in Hungary – demonstrate that the competence expectations of the job market for Hungarian managers fail to meet professional expectations; the picture is sharply different from what the analysis of job advertisements published in The Economist show, and the competence expectation changed very little, though quite strikingly, over the period under discussion.

Tropical seagrass-associated macroalgae distributions and trends relative to water quality

Tropical coastal marine ecosystems including mangroves, seagrass beds and coral reef communities are undergoing intense degradation in response to natural and human disturbances, therefore, understanding the causes and mechanisms present challenges for scientist and managers. In order to protect our marine resources, determining the effects of nutrient loads on these coastal systems has become a key management goal. Data from monitoring programs were used to detect trends of macroalgae abundances and develop correlations with nutrient availability, as well as forecast potential responses of the communities monitored. Using eight years of data (1996–2003) from complementary but independent monitoring programs in seagrass beds and water quality of the Florida Keys National Marine Sanctuary (FKNMS), we: (1) described the distribution and abundance of macroalgae groups; (2) analyzed the status and spatiotemporal trends of macroalgae groups; and (3) explored the connection between water quality and the macroalgae distribution in the FKNMS. In the seagrass beds of the FKNMS calcareous green algae were the dominant macroalgae group followed by the red group; brown and calcareous red algae were present but in lower abundance. Spatiotemporal patterns of the macroalgae groups were analyzed with a non-linear regression model of the abundance data. For the period of record, all macroalgae groups increased in abundance (Abi) at most sites, with calcareous green algae increasing the most. Calcareous green algae and red algae exhibited seasonal pattern with peak abundances (Φi) mainly in summer for calcareous green and mainly in winter for red. Macroalgae Abi and long-term trend (mi) were correlated in a distinctive way with water quality parameters. Both the Abi and mi of calcareous green algae had positive correlations with NO3−, NO2−, total nitrogen (TN) and total organic carbon (TOC). Red algae Abi had a positive correlation with NO2−, TN, total phosphorus and TOC, and the mi in red algae was positively correlated with N:P. In contrast brown and calcareous red algae Abi had negative correlations with N:P. These results suggest that calcareous green algae and red algae are responding mainly to increases in N availability, a process that is happening in inshore sites. A combination of spatially variable factors such as local current patterns, nutrient sources, and habitat characteristics result in a complex array of the macroalgae community in the seagrass beds of the FKNMS.

Measuring Hotel Service Quality: Tools for Gaining the Competitive Edge

As the hotel industry grows more competitive, quality guest service becomes an increasingly important part of managers' responsibility measuring the quality of service delivery is facilitated when managers know what types of assessment methods are available to them. The authors present and discuss the following available measurement techniques and describe the situations where they best meet the needs of hotel managers: management observation, employee feedback programs, comment cards, mailed surveys, personal and telephone interviews, focus groups, and mystery shopping.

Challenge to Managers: Changing Hotel Work from a Secondary Choice to career Development

In his discussion - Challenge To Managers: Changing Hotel Work from a Secondary Choice to Career Development - by Leonidas Chitiris, Lecturer in Management, Piraeus Graduate School of Industrial Studies, Athens, Greece, Chitiris marginally alludes at the outset: “Surveys and interviews with hotel employees in Greece with regard to why individuals work for hotels and to what extent their rationale to join the hotel industry affects hotel productivity revealed that the choice to work in hotels is a secondary preference and reflects the opportunity structure in the economy at any given time and the greater the number of those who work in hotels when there are no other employment opportunities, the less likely the chances for overall improved performance. Given the increase in the proportion of unskilled, unmotivated workers, the level of hotel productivity consequently decreases! The author interprets the findings in terms of the economic and employment conditions in the Greek hotel industry. To enhance the rationale of his thesis statement, Chitiris offers with citation: “Research on initial entry into the labor force has shown that new employees reflect idealized expectations and are frequently not very satisfied with their jobs and roles in the work settings.” Chitiris advances the thought even further by saying: “Research on job satisfaction, motivation, and production purports that management can initiate policies that develop job satisfaction and may improve productivity.” The author outlines components within the general category of the hotel industry to label and quantify exactly why there may be a lag between employee expectations and the delivery of a superior level of service. Please keep in mind that the information for this essay is underpinned by the hotel industry in Greece, exclusively. Demographic information is provided. One example of the many factors parsed in this hotel service discussion is the employee/guest relationship. “The quality of service in hotels is affected to a great extent by the number of guests a hotel employee has to serve,” Chitiris offers. Additionally, Chitiris’ characterization of the typical hotel employee in Greece is not flattering, but it is an informed and representative view of that lodging labor pool. The description in and of itself begs to explain at least some of why the hotel industry in Greece suffers a consequently diminished capacity of superior service. Ill equipped, under-educated, over-worked, and under-paid are how Chitiris describes most employees in the Hellenist hospitality field. Survey based studies, and formulaic indices are used to measure variables related to productivity; the results may be inconclusive industry wide, but are interesting nonetheless. Also, an appealing table gauges the reasons why hotel workers actually employ themselves in the lodging industry. Chirtiris finds that salary expectations do not rate all that high on the motivational chart and are only marginal when related to productivity. In closing, Chirtiris presents a 5-phase development plan hotels should look to in improving performance and productivity at their respective properties.