Plasma Polymerised Organic Thin Films-A Study on the Structural, Electrical and Nonlinear Optical Properties for Possible Applications

This proposed thesis is entitled “Plasma Polymerised Organic Thin Films: A study on the Structural, Electrical, and Nonlinear Optical Properties for Possible Applications. Polymers and polymer based materials find enormous applications in the realm of electronics and optoelectronics. They are employed as both active and passive components in making various devices. Enormous research activities are going on in this area for the last three decades or so, and many useful contributions are made quite accidentally. Conducting polymers is such a discovery, and eversince the discovery of conducting polyacetylene, a new branch of science itself has emerged in the form of synthetic metals. Conducting polymers are useful materials for many applications like polymer displays, high density data storage, polymer FETs, polymer LEDs, photo voltaic devices and electrochemical cells. With the emergence of molecular electronics and its potential in finding useful applications, organic thin films are receiving an unusual attention by scientists and engineers alike. This is evident from the vast literature pertaining to this field appearing in various journals. Recently, computer aided design of organic molecules have added further impetus to the ongoing research activities in this area. Polymers, especially, conducting polymers can be prepared both in the bulk and in the thinfilm form. However, many applications necessitate that they are grown in the thin film form either as free standing or on appropriate substrates. As far as their bulk counterparts are concerned, they can be prepared by various polymerisation techniques such as chemical routes and electrochemical means. A survey of the literature reveals that polymers like polyaniline, polypyrrole, polythiophene, have been investigated with a view to studying their structural electrical and optical properties. Among the various alternate techniques employed for the preparation of polymer thin films, the method of plasma polymerisation needs special attention in this context. The technique of plasma polymerisation is an inexpensive method and often requires very less infra structure. This method includes the employment of ac, rf, dc, microwave and pulsed sources. They produce pinhole free homogeneous films on appropriate substrates under controlled conditions. In conventional plasma polymerisation set up, the monomer is fed into an evacuated chamber and an ac/rf/dc/ w/pulsed discharge is created which enables the monomer species to dissociate, leading to the formation of polymer thin films. However, it has been found that the structure and hence the properties exhibited by plasma polymerized thin films are quite different from that of their counterparts produced by other thin film preparation techniques such as electrochemical deposition or spin coating. The properties of these thin films can be tuned only if the interrelationship between the structure and other properties are understood from a fundamental point of view. So very often, a through evaluation of the various properties is a pre-requisite for tailoring the properties of the thin films for applications. It has been found that conjugation is a necessary condition for enhancing the conductivity of polymer thin films. RF technique of plasma polymerisation is an excellent tool to induce conjugation and this modifies the electrical properties too. Both oxidative and reductive doping can be employed to modify the electrical properties of the polymer thin films for various applications. This is where organic thin films based on polymers scored over inorganic thin films, where in large area devices can be fabricated with organic semiconductors which is difficult to achieve by inorganic materials. For such applications, a variety of polymers have been synthesized such as polyaniline, polythiophene, polypyrrole etc. There are newer polymers added to this family every now and then. There are many virgin areas where plasma polymers are yet to make a foray namely low-k dielectrics or as potential nonlinear optical materials such as optical limiters. There are also many materials which are not been prepared by the method of plasma polymerisation. Some of the materials which are not been dealt with are phenyl hydrazine and tea tree oil. The advantage of employing organic extracts like tea tree oil monomers as precursors for making plasma polymers is that there can be value addition to the already existing uses and possibility exists in converting them to electronic grade materials, especially semiconductors and optically active materials for photonic applications. One of the major motivations of this study is to synthesize plasma polymer thin films based on aniline, phenyl hydrazine, pyrrole, tea tree oil and eucalyptus oil by employing both rf and ac plasma polymerisation techniques. This will be carried out with the objective of growing thin films on various substrates such as glass, quartz and indium tin oxide (ITO) coated glass. There are various properties namely structural, electrical, dielectric permittivity, nonlinear optical properties which are to be evaluated to establish the relationship with the structure and the other properties. Special emphasis will be laid in evaluating the optical parameters like refractive index (n), extinction coefficient (k), the real and imaginary components of dielectric constant and the optical transition energies of the polymer thin films from the spectroscopic ellipsometric studies. Apart from evaluating these physical constants, it is also possible to predict whether a material exhibit nonlinear optical properties by ellipsometric investigations. So further studies using open aperture z-scan technique in order to evaluate the nonlinear optical properties of a few selected samples which are potential nonlinear optical materials is another objective of the present study. It will be another endeavour to offer an appropriate explanation for the nonlinear optical properties displayed by these films. Doping of plasma polymers is found to modify both the electrical conductivity and optical properties. Iodine is found to modify the properties of the polymer thin films. However insitu iodine doping is tricky and the film often looses its stability because of the escape of iodine. An appropriate insitu technique of doping will be developed to dope iodine in to the plasma polymerized thin films. Doping of polymer thin films with iodine results in improved and modified optical and electrical properties. However it requires tools like FTIR and UV-Vis-NIR spectroscopy to elucidate the structural and optical modifications imparted to the polymer films. This will be attempted here to establish the role of iodine in the modification of the properties exhibited by the films

Propagation of Microwaves in the Troposphere with Potential Application to GPS based Navigation and Meteorology with emphasis on Indian region

Global Positioning System (GPS), with its high integrity, continuous availability and reliability, revolutionized the navigation system based on radio ranging. With four or more GPS satellites in view, a GPS receiver can find its location anywhere over the globe with accuracy of few meters. High accuracy - within centimeters, or even millimeters is achievable by correcting the GPS signal with external augmentation system. The use of satellite for critical application like navigation has become a reality through the development of these augmentation systems (like W AAS, SDCM, and EGNOS, etc.) with a primary objective of providing essential integrity information needed for navigation service in their respective regions. Apart from these, many countries have initiated developing space-based regional augmentation systems like GAGAN and IRNSS of India, MSAS and QZSS of Japan, COMPASS of China, etc. In future, these regional systems will operate simultaneously and emerge as a Global Navigation Satellite System or GNSS to support a broad range of activities in the global navigation sector.Among different types of error sources in the GPS precise positioning, the propagation delay due to the atmospheric refraction is a limiting factor on the achievable accuracy using this system. The WADGPS, aimed for accurate positioning over a large area though broadcasts different errors involved in GPS ranging including ionosphere and troposphere errors, due to the large temporal and spatial variations in different atmospheric parameters especially in lower atmosphere (troposphere), the use of these broadcasted tropospheric corrections are not sufficiently accurate. This necessitated the estimation of tropospheric error based on realistic values of tropospheric refractivity. Presently available methodologies for the estimation of tropospheric delay are mostly based on the atmospheric data and GPS measurements from the mid-latitude regions, where the atmospheric conditions are significantly different from that over the tropics. No such attempts were made over the tropics. In a practical approach when the measured atmospheric parameters are not available analytical models evolved using data from mid-latitudes for this purpose alone can be used. The major drawback of these existing models is that it neglects the seasonal variation of the atmospheric parameters at stations near the equator. At tropics the model underestimates the delay in quite a few occasions. In this context, the present study is afirst and major step towards the development of models for tropospheric delay over the Indian region which is a prime requisite for future space based navigation program (GAGAN and IRNSS). Apart from the models based on the measured surface parameters, a region specific model which does not require any measured atmospheric parameter as input, but depends on latitude and day of the year was developed for the tropical region with emphasis on Indian sector.Large variability of atmospheric water vapor content in short spatial and/or temporal scales makes its measurement rather involved and expensive. A local network of GPS receivers is an effective tool for water vapor remote sensing over the land. This recently developed technique proves to be an effective tool for measuring PW. The potential of using GPS to estimate water vapor in the atmosphere at all-weather condition and with high temporal resolution is attempted. This will be useful for retrieving columnar water vapor from ground based GPS data. A good network of GPS could be a major source of water vapor information for Numerical Weather Prediction models and could act as surrogate to the data gap in microwave remote sensing for water vapor over land.

Brachyuran Crabs of Cochin Backwaters- Diversity, Habitat Ecology and Systematics, with special emphasis to Genus Scylla

Among the decapod crustaceans, brachyuran crabs or the true crabs occupy a very significant position due to their ecological and economic value. Crabs support a sustenance fishery in India, even though their present status is not comparable to that of shrimps and lobsters. They are of great demand in the domestic market as well as in the foreign markets. In addition to this, brachyuran crabs are of great ecological importance. They form the conspicuous members of the mangrove ecosystems and play a significant role in detritus formation, nutrient recycling and dynamics of the ecosystem. Considering all these factors, crabs are often considered to be the keystone species of the mangrove ecosystem. Though several works have been undertaken on brachyuran crabs world –wide as well as within the country, reports on the brachyuran crabs of Kerala waters are very scanty. Most of the studies done on brachyuran fauna were from the east coast of India and a very few works from the west coast. Among the edible crabs, mud crabs belonging to genus Scylla forms the most important due to their large size and taste. They are being exported on a large scale to the foreign markets like Singapore, Malaysia and Hong Kong. Kerala is the biggest supplier of live mud crabs and Chennai is the major centre of live mud crab export. However, there exists considerable confusion regarding the identification of mud crabs because of the subtle morphological differences between the species.In this context, an extensive study was undertaken on the brachyuran fauna of Cochin Backwaters, Kerala, India, to have a basic knowledge on their diversity, habitat preference and systematics. The study provides an attempt to resolve the confusion pertaining in the species identification of mud crabs belonging to Genus Scylla. Diversity study revealed the occurrence of 23 species of brachyuran crabs belonging to 16 genera and 8 families in the study area Cochin Backwaters. Among the families, the highest number of species was recorded from Family Portunidae .Among the 23 crab species enlisted from the Cochin backwaters, 5 species are of commercial importance and contribute a major share to the crustacean fishery of the Cochin region. It was observed that, the Cochin backwaters are invaded by certain marine migrant species during the Post monsoon and Pre monsoon periods and they are found to disappear with the onset of monsoon. The study reports the occurrence of the ‘herring bow crab’ Varuna litterata in the Cochin backwaters for the first time. Ecological studies showed that the substratum characteristics influence the occurrence, distribution and abundance of crabs in the sampling stations rather than water quality parameters. The variables which affected the crab distribution the most were Salinity, moisture content in the sediment, organic carbon and the sediment texture. Besides the water and sediment quality parameters, the most important factor influencing the distribution of crabs is the presence of mangroves. The study also revealed that most of the crabs encountered from the study area preferred a muddy substratum, with high organic carbon content and high moisture content. In the present study, an identification key is presented for the brachyuran crabs occurring along the study area the Cochin backwaters and the associated mangrove patches, taking into account the morphological characters coupled with the structure of third maxillipeds, first pleopods of males and the shape of male abdomen. Morphological examination indicated the existence of a morphotype which is comparable with the morphological features of S. tranquebarica, the morphometric study and the molecular analyses confirmed the non existence of S. tranquebarica in the Cochin backwaters.

Pre-empting technical barriers in the Single Market. CEPS Policy Brief No. 277, 11 July 2012

Effective enforcement and compliance with EU law is not just a legal necessity, it is also of economic interest since the potential of the Single Market will be fully exploited. Enforcement barriers generate unjustified costs and hindrances or uncertainty for cross-border business and might deprive consumers from receiving the full benefit of greater choice and/or cheaper offers. The EU has developed several types of enforcement efforts (preventive initiatives, pre-infringement initiatives and formal infringement procedures). More recently, the emphasis has been placed on effective prevention. This CEPS Policy Brief analyses the functioning of one preventive mechanism (the 98/34 Directive) and assesses its potential to detect and prevent technical or other barriers in the course of the last 25 years. Based on an empirical approach, it shows that this amazing mechanism has successfully prevented thousands of new technical barriers from arising in the internal goods market.

Customer experience quality: an exploration in business and consumer contexts using repertory grid technique

This study proposes a conceptual model for customer experience quality and its impact on customer relationship outcomes. Customer experience is conceptualized as the customer’s subjective response to the holistic direct and indirect encounter with the firm, and customer experience quality as its perceived excellence or superiority. Using the repertory grid technique in 40 interviews in B2B and B2C contexts, the authors find that customer experience quality is judged with respect to its contribution to value-in-use, and hence propose that value-in-use mediates between experience quality and relationship outcomes. Experience quality includes evaluations not just of the firm’s products and services but also of peer-to-peer and complementary supplier encounters. In assessing experience quality in B2B contexts, customers place a greater emphasis on firm practices that focus on understanding and delivering value-in-use than is generally the case in B2C contexts. Implications for practitioners’ customer insight processes and future research directions are suggested.

Use of checkerboard DNA-DNA hybridization to evaluate the internal contamination of dental implants and comparison of bacterial leakage with cast or pre-machined abutments

To evaluate the checkerboard DNA-DNA hybridization method for detection and quantitation of bacteria from the internal parts of dental implants and to compare bacterial leakage from implants connected either to cast or to pre-machined abutments. Nine plastic abutments cast in a Ni-Cr alloy and nine pre-machined Co-Cr alloy abutments with plastic sleeves cast in Ni-Cr were connected to Branemark-compatible implants. A group of nine implants was used as control. The implants were inoculated with 3 mu l of a solution containing 10(8) cells/ml of Streptococcus sobrinus. Bacterial samples were immediately collected from the control implants while assemblies were completely immersed in 5 ml of sterile Tripty Soy Broth (TSB) medium. After 14 days of anaerobic incubation, occurrence of leakage at the implant-abutment interface was evaluated by assessing contamination of the TSB medium. Internal contamination of the implants was evaluated with the checkerboard DNA-DNA hybridization method. DNA-DNA hybridization was sensitive enough to detect and quantify the microorganism from the internal parts of the implants. No differences in leakage and in internal contamination were found between cast and pre-machined abutments. Bacterial scores in the control group were significantly higher than in the other groups (P < 0.05). Bacterial leakage through the implant-abutment interface does not significantly differ when cast or pre-machined abutments are used. The checkerboard DNA-DNA hybridization technique is suitable for the evaluation of the internal contamination of dental implants although further studies are necessary to validate the use of computational methods for the improvement of the test accuracy. To cite this article:do Nascimento C, Barbosa RES, Issa JPM, Watanabe E, Ito IY, Albuquerque Junior RF. Use of checkerboard DNA-DNA hybridization to evaluate the internal contamination of dental implants and comparison of bacterial leakage with cast or pre-machined abutments.Clin. Oral Impl. Res. 20, 2009; 571-577.doi: 10.1111/j.1600-0501.2008.01663.x.

Polyaniline/layered zirconium phosphate nanocomposites: Secondary-like doped polyaniline obtained by the layer-by-layer technique

In the present work, nanocomposites of polyaniline (PANI) and layered alpha-Zr(HPO4)(2).H2O (alpha-ZrP) were prepared using two different approaches: (i) the in situ aniline polymerization in the presence of the layered inorganic material and (ii) the layer-by-layer (LBL) assembly using an aqueous solution of the polycation emeraldine salt (ES-PANI) and a dispersion of exfoliated negative slabs of alpha-ZrP. These materials were characterized spectroscopically using mainly resonance Raman scattering at four exciting radiations and electronic absorption in the UV-VIS-NIR region. Structural and textural characterizations were carried out using powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). The polymer obtained by the in situ aniline polymerization is located primarily in the external surface of the inorganic material although aniline monomers were intercalated between alpha-ZrP interlayer regions before oxidative polymerization. Through resonance Raman spectroscopy, it was observed that the formed polymer has semiquinone units (ES-PANI) and also azo bonds (-N = N-), showing that this method results in a polymer with a different structure from the usual ""head-to-tail"" ES-PANI. The LBL assembly of pre-formed ES-PANI and exfoliated alpha-ZrP particles produces homogeneous films with reproducible deposition from layer to layer, up to 20 bilayers. Resonance Raman (lambda(0) = 632.8 nm) spectrum of PANI/ZrP LBL film shows an enhancement in the intensity of the polaronic band at 1333 cm(-1) (nu C-N center dot+) and the decrease of the band intensity at 1485 cm(-1) compared to bulk ES-PANI. Its UV-VIS-NIR spectrum presents an absorption tail in the NIR region assigned to delocalized free charge carrier. These spectroscopic features are characteristic of highly conductive secondary doped PANI suggesting that polymeric chains in PANI/ZrP LBL film have a more extended conformation than in bulk ES-PANI.

Thermal analysis of biodegradable microparticles containing ciprofloxacin hydrochloride obtained by spray drying technique

Thermal analysis has been extensively used to obtain information about drug-polymer interactions and to perform pre-formulation studies of pharmaceutical dosage forms. In this work, biodegradable microparticles of poly(D,L-lactide-co-glycolide) (PLGA) containing ciprofloxacin hydrochloride (CP) in various drug:polymer ratios were obtained by spray drying. The main purpose of this study was to investigate the effect of the spray drying process on the drug-polymer interactions and on the stability of microparticles using differential scanning calorimetry (DSC), thermogravimetry (TG) and derivative thermogravimetry (DTG) and infrared spectroscopy (IR). The results showed that the high levels of encapsulation efficiency were dependant on drug:polymer ratio. DSC and TG/DTG analyses showed that for physical mixtures of the microparticles components the thermal profiles were different from those signals obtained with the pure substances. Thermal analysis data disclosed that physical interaction between CP and PLGA in high temperatures had occurred. The DSC and TG profiles for drug-loaded microparticles were very similar to the physical mixtures of components and it was possible to characterize the thermal properties of microparticles according to drug content. These data indicated that the spray dryer technique does not affect the physicochemical properties of the microparticles. In addition, the results are in agreement with IR data analysis demonstrating that no significant chemical interaction occurs between CP and PLGA in both physical mixtures and microparticles. In conclusion, we have found that the spray drying procedure used in this work can be a secure methodology to produce CP-loaded microparticles. (C) 2007 Elsevier B.V. All rights reserved.

SEM, EPR and ToF-SIMS analyses applied to unravel the technology employed for pottery-making by pre-colonial Indian tribes from Pantanal, Brazil

The present work aims at elucidating the technology applied in the fabrication of ceramic objects by the ancient ceramists that inhabited the western border of Pantanal, Mato-Grosso do Sul, with the help of a multidisciplinary approach making use of chemical and physical methods of analysis. The potshards under study show the presence of different types of additives, as determined by scanning electron microscopy (SEM) and time of flight secondary ion mass spectrometry (ToF-SIMS). The dispersion of the additives within the ceramic matrix was also addressed by SEM, which shed light on the mounting technique used by the potters to assemble the ceramic vessels. Moreover, the tensile strength conferred to the pottery by the use of a specific type of additive was evaluated by applying a mechanical test. These results were correlated with the firing temperature of the potshards, determined by means of electron paramagnetic resonance (EPR). (C) 2010 Elsevier Ltd. All rights reserved.

Undergraduate pre-registration nursing education in Australia: a longitudinal examination of enrolment and completion numbers with a focus on students from rural and remote campus locations

Introduction: There is much evidence to indicate a shortage of Registered Nurses (RNs) in Australia and to suggest that the shortage may be more pronounced in rural and remote locations. Attracting RNs to work in rural and remote areas may not be as simple as increasing the intake of students into university undergraduate pre-registration nursing courses. There is some evidence indicating that student nurses may be more likely to enter the nursing workforce in rural and remote locations if they have existing associations with rural and remote areas and/or their undergraduate education provides opportunities to undertake supported placements in rural and remote settings. Two important difficulties have been associated with measuring outcomes in relation to rural and remote pre-registration nursing students. One is defining what constitutes a rural or remote location and the other is suspect data on the number of nursing students enrolled in, and completing, nursing courses. The aims of this study were to provide a longitudinal profile of the number of domestic students studying and completing undergraduate pre-registration nursing courses in Australia, with a particular emphasis on identifying those at rural and remote university campuses, and to compare results across States and Territories.
Method: This study presents the combined findings from two investigative reports. Data on undergraduate pre-registration nursing student numbers were collected via electronic survey instruments completed by staff at all Australian educational institutions offering undergraduate pre-registration nursing education programs in 2001 and 2002. Australian domestic students were the focus of this study. Data included the total number of domestic students enrolled in undergraduate pre-registration nursing courses in 2001 and 2002, the number of domestic students who successfully completed courses in 1999, 2000 and 2001, and estimates for the number expected to complete in 2002. Surveys were sent to course coordinators or other staff nominated by heads of divisions of nursing at each institution.
Results: There was a 100% response rate. Twenty-four rural and remote campus locations were identified using an adjusted form of the Rural, Remote and Metropolitan Areas (RRMA) classification system. The Australian Capital Territory and the Northern Territory did not have any rural or remote campus locations. In contrast, undergraduate pre-registration nursing in Tasmania was offered at a rural campus only (for the first 2 years). From 2001 to 2002, there was an increase of just over 5% in the total number of domestic students enrolled in undergraduate pre-registration nursing courses in Australia (2002 total = 22 811 students). Rural and remote location students accounted for slightly more than 25% of these students in 2001, and almost 27% in 2002. The States Victoria, New South Wales and Queensland had the highest percentage of students enrolled at rural and remote campus locations, greater than the Australian average for both years. In contrast, South Australia and Western Australia had less than 11% of students enrolled at rural and remote campus locations for each year. Total undergraduate pre-registration course completions increased by approximately 16% across Australia between 1999 (n = 4868) and 2002 (n = 5667), although for 2002, the figure was projected. Of these total course completions, the percentage of students completing at rural and remote campus locations increased from almost 23% to nearly 28% during the same period. Of the States/Territories with both metropolitan and rural/remote campus locations, only Victoria and Queensland had more than 25% of their total student completions consisting of students enrolled at rural and remote campus locations for each year. In contrast, South Australia and Western Australia had approximately 6% of student completions consisting of students enrolled at rural and remote campus locations in 1999, increasing to approximately 12% projected for 2002.
Conclusion: In this study, the authors attempted to improve the accuracy of data collection in relation to the number of domestic undergraduate pre-registration nursing students in Australia, which is representative of the potentially new Australian domestic RN workforce. There was a trend towards an increasing number of students being enrolled in undergraduate pre-registration nursing courses, and also toward an increasing number of course completions. From the perspective of the rural and remote RN workforce, the percentage of students enrolled and completing courses at rural and remote campus locations was found to be increasing. However, there may be some areas of concern for education and workforce planners in States and Territories that are providing a smaller percentage of their undergraduate pre-registration nursing courses in rural and remote areas. Several study limitations are discussed and suggestions made for future research.

Assume the position: reconfiguring the spatial in the pre-service education classroom

Current understandings of the practice of education locate pedagogy in the public domain through the articulation of the personal domain (Pinar, 2004). Critical literacy has provided teachers and teacher educators with a means of transforming subjectivity and relocating the personal through writing (Kamler, 2001). The emphasis in a critical literacy approach on the spoken and written word sits comfortably in the academic discourse of tertiary education, although it's engagement with the personal meets with some resistance. However, to engage the personal through arts based approaches meets far greater resistance. When used as the medium for core educational studies it provokes passionate responses of both dissent and accord. The authors argue the possibilities for an arts based pedagogy in pre-service education which provides a space for learning outside the accepted academic discourse and which supports the possibilities of imaging and knowing the positioned teacher. This research (dis)locates (Laclau, 1990; Edwards and Usher, 1997) the spatial configuration of the tertiary education classroom: reconfiguring the physical, positional, and epistemological.

Examination of the "all hazards" approach to disaster management as applied to field disaster management and pre-hospital care in Australia

Disasters, emergencies, incidents, and major incidents - they all come back to the same thing regardless of what they are called. The common denominator is that there is loss of life, injury to people and animals and damage and destruction of property. The management of such events relies on four phases: 1. Prevention 2. Preparation 3. Response 4. Recovery Each of these phases is managed in a different way and often by different teams. Here, concentration has been given to phases 2 and 3, with particular emphasis on phase 3, Response. The words used to describe such events are often related to legislation. The terminology is detailed later. However, whatever the description, whenever prevention is not possible, or fails, then the need is to respond. Response is always better when the responders are prepared. Training is a major part of response preparation and this book is designed to assist those in the health industry who need to be ready when something happens. One of the training packages for responders is the Major Incident Medical Management and Support (MIMMS) Course and this work was designed to supplement the manual prepared by Hodgetts and Macway-Jones(87) in the UK. Included is what the health services responder, who may be sent to an event in which the main concern is trauma, should know. Concentration is on the initial response and does not deal in any detail with hospital reaction, the public health aspects, or the mental health support that provides psychological help to victims and responders, and which are also essential parts of disaster management. People, in times of disaster, have always been quick to offer assistance. It is now well recognised however, that the 'enthusiastic amateur', whilst being a well meaning volunteer, isn't always what is needed. All too often such people have made things worse and have sometimes ended up as victims themselves. There is a place now for volunteers and there probably always will be. The big difference is that these people must be well informed, well trained and well practiced if they are to be effective. Fortunately such people and organisations do exist. Without the work of the St John Ambulance, the State Emergency Service, the Rural Fire Service the Red Cross and the Volunteer Rescue Association, to mention only a few, our response to disasters would be far less effective. There is a strong history of individuals being available to help the community in times of crisis. Mostly these people were volunteers but there has also always been the need for a core of professional support. In the recent past, professional support mechanisms have been developed from lessons learned, particularly to situations that need a rapid and well organised response. As lessons are learned from an analysis of events, philosophy and methods have changed. Our present system is not perfect and perhaps never will be. The need for an 'all-hazards approach' makes detailed planning very difficult and so there will probably always be criticisms about the way an event was handled. Hindsight is a wonderful thing, provided we learn from it. That means that this text is certainly not the 'last word' and revisions as we learn from experience will be inevitable. Because the author works primarily in New South Wales, many of the explanations and examples are specific to that state. In Australia disaster response is a State, rather than a Commonwealth, responsibility and consequently, and inevitably, there are differences in management between the states and territories within Australia. With the influence of Emergency Management Australia, these differences are being reduced. This means that across state and territory boundaries, assistance is common and interstate teams can be deployed and assimilated into the response rapidly, safely, effectively and with minimum explanation. This text sets out to increase the understanding of what is required, what is in place and how the processes of response are managed. By way of introduction and background, examples are given of those situations that have occurred, or could happen. Man Made Disasters has been divided into two distinct sections. Those which are related to structures or transport and those related directly to people. The first section, Chapter 3, includes: • Transport accidents involving land, rail, sea or air vehicles. • Collapse of buildings for reasons other than earthquakes or storms. • Industrial accidents, including the release of hazardous substances and nuclear events. A second section dealing with the consequences of the direct actions of people is separated as Chapter 4, entitled 'People Disasters'. Included are: • Crowd incidents involving sports and entertainment venues. • Terrorism From Chapter 4 on, the emphasis is on the Response phase and deals with organisation and response techniques in detail. Finally there is a section on terminology and abbreviations. An appendix details a typical disaster pack content. War, the greatest of all man made disasters is not considered in this text.

Adventurous girls of the empire : the pre-war novels of Bessie Marchant

Historically, the genre of adventure fiction most readily recalls books for boys and male heroes rather than girl readers and protagonists. These include enduringly well-known works such as H. Rider Haggard's King Solomon's Mines (1885) and She (1887), the early to mid-Victorian boys' stories of Frederick Marryat, W. H. G. Kingston, and R. M. Ballantyne and the late-Victorian G. A. Henty's tales (his more than one hundred adventure stories sold in excess of 25 million copies). The novel of adventure at the conclusion of the nineteenth century recounted tales of male exploration on land or sea, and quests or conquests in real or imagined lands removed from the gentility of civilized England. These generic features were aligned with masculine traits of activity and strength, and while girls could and did indeed read boys' adventure books, examples with female protagonists were uncommon in the Victorian period. Joseph Bristow argues that between 1870 and 1900, "narratives celebrating empire and techniques in teaching reading and writing gradually converged . . . [B]oth inside and outside the classroom, there was more and more emphasis on heroic adventure, and this involved a number of shifts in attitude towards juvenile publishing and curriculum design" (20–21). The works Bristow refers to were, of course, written by male authors about masculine adventurers.

The novels of Bessie Marchant—sometimes called "the girls' Henty" —began to be published as the nineteenth century drew to a close. Her girl heroines act independently in isolated areas in Australia, New Zealand, Canada, India, South America, India, South Africa, Siberia, and Central America. From 1894 until her death in 1941, Marchant wrote more than a 130 novels, many of which celebrated the capacity of British or colonial girls to rise to any challenge set before them in rugged.

Relationship between indices of adiposity obtained by peripheral quantitative computed tomography and dual-energy X-ray absorptiometry in pre-pubertal children

Background/Aim: The study investigated the relationship between indices of adiposity measured by peripheral quantitative computed tomography (pQCT) and dual-energy X-ray absorptiometry (DXA) in pre-pubertal children.

Subjects and methods: DXA-derived per cent body fat (%BF) was measured in 284 boys and 288 girls, aged 7–10 years. Cross-sections of the forearm (n=427) and lower leg (n=560) were obtained by pQCT to measure total cross-sectional area of the limb (Total CSA), Muscle CSA, Fat CSA, %Fat CSA (Fat CSA/Total CSA×100) and muscle density.

Results: Peripheral QCT-derived %Fat CSA in the forearm and lower leg correlated strongly with DXA-derived %BF (r=0.83–0.89, p<0.01) in both boys and girls. However, forearm and lower leg %Fat CSA were higher than whole body %BF by 5% and 10%, respectively. A better prediction of whole-body %BF was achieved by including %Fat CSA, muscle density and height into a hierarchical regression model. Using sex-specific regression equations, 87.7% of the boys and 83.7% of the girls had a predicted %BF within 3% units of the %BF obtained by DXA.

Conclusion: In pre-pubertal children, pQCT measures of adiposity are strongly associated with whole-body per cent body fat. This reproducible method could be an alternative technique to estimate body composition in this population.

Australian pre-service secondary teacher education courses : challenges and Dilemmas