High-density collagen gel tubes as a matrix for primary human bladder smooth muscle cells.

Tissue-engineered grafts for the urinary tract are being investigated for the potential treatment of several urologic diseases. These grafts, predominantly tubular-shaped, usually require in vitro culture prior to implantation to allow cell engraftment on initially cell-free scaffolds. We have developed a method to produce tubular-shaped collagen scaffolds based on plastic compression. Our approach produces a ready cell-seeded graft that does not need further in vitro culture prior to implantation. The tubular collagen scaffolds were in particular investigated for their structural, mechanical and biological properties. The resulting construct showed an especially high collagen density, and was characterized by favorable mechanical properties assessed by axial extension and radial dilation. Young modulus in particular was greater than non-compressed collagen tubes. Seeding densities affected proliferation rate of primary human bladder smooth muscle cells. An optimal seeding density of 10(6) cells per construct resulted in a 25-fold increase in Alamar blue-based fluorescence after 2 wk in culture. These high-density collagen gel tubes, ready seeded with smooth muscle cells could be further seeded with urothelial cells, drastically shortening the production time of graft for urinary tract regeneration.

Mechanisms involved in the maintenance of inbreeding depression in gynodioecious "Silene vulgaris" (Caryophyllaceae): an experimental investigation

Summary Gynodioecy, the joint occurrence of females and hermaphrodites within natural populations, is a widely studied mating system ever since Darwin (1877). It is an exceptional mating system because continuous selection is necessary to maintain it. Since females only reproduce through ovules whereas hermaphrodites transmit genes through ovules and pollen, larger female fitness, in terms of seed output, is required to allow their maintenance. Two non-exclusive mechanisms can account for the maintenance of females. First, as females do not produce pollen they can reallocate their resources towards a higher ovule production. Second, hermaphrodites can self- and cross-fertilize whereas females are obligate outcrossers. Thus hermaphrodites should partly suffer from inbreeding depression (i.e.: the fitness decline of inbred relative to outbred individuals) and thereby produce less fit progeny than females. This thesis investigated the effects of self- and cross-fertilization of heimaphrodites over two consecutive generations. Inbreeding depression increased across the successive stages of the life- cycle (i.e.: from "seed traits" to "reproductive traits") displaying large inbreeding depression estimates (up to 0.76). This investigation not only detected large inbreeding depression estimates but also detected mechanisms involved in the maintenance of inbreeding depression. For instance cryptic self-incompatibility which is here a larger in vivo pollen performance of distant pollen compared to self-pollen; the expression of inbreeding depression especially in late life-cycle stages, and the appearance of females in the progeny of selfed hermaphrodites. The female biased sex ratio in the progeny of selfed hermaphrodites was a surprising result and could either come from the sex determining mechanisms (complex nucleo-cytoplasmic interaction(s)) and/or from inbreeding depression. Indeed, we not only got females and hermaphrodites but also partial male-sterile (PMS) individuals (i.e.: individuals with differing number of viable stamens). We detected that inbred pollen bearing plants (excluding females) have less viable stamens per flower than outbred plants. A positive correlation was detected between inbreeding depression for the number of viable stamens per flower and the difference in sex ratio between inbred and outbred individuals. A positive relationship was also detected between inbreeding depression for pollen viability and inbreeding depression for number of viable stamens per flower. Each correlation can either account for pleiotropic effects (a major gene acting on the two considered traits) or linkage disequilibrium between genes controlling each of the two related traits. If we hypothesize that these correlations are due to a major gene with pleiotropic effects, the positive relationship between inbreeding depression for number of viable stamens per flower and inbreeding depression for pollen viability showed that deleterious alleles present on a major gene coding for pollen production and viability depressed male fitness within inbred plants. The positive relationship between sex ratio difference between inbred and outbred individuals and inbreeding depression for number of viable stamens per flower indicates that (1) either number of viable stamens per flower is, in addition to inbreeding, also affected by the loci coding for sex determinism or, (2) the presence of females within the progeny of selfed hermaphrodites is a consequence of large inbreeding depression inhibiting pollen production, or (3) sex is here determined by a combination of loci coding for sex expression and inbreeding depression for male reproductive traits. In conclusion, Silene vulgaris has been shown to be a good model for understanding the evolution of mating systems that promote outbreeding. Résumé La gynodïoécie est définie comme étant la présence simultanée d'hermaphrodites et de femelles au sein de populations naturelles d'une même espèce. Ce système de reproduction a toujours fasciné le monde scientifique depuis Darwin, comme en témoigne ses écrits (1876, 1877) sur les systèmes de reproduction chez les plantes. Les femelles ne transmettent leurs gènes qu'à travers leurs ovules alors que les hermaphrodites transmettent leurs gènes à la fois par la voie mâle (le pollen) et la voie femelle (les ovules). La condition pour que la gynodïoécie se maintienne nécessite donc une fitness de la fonction femelle plus élevée chez les femelles que chez les hermaphrodites. Deux mécanismes mutuellement non exclusifs peuvent expliquer le maintien des femelles au sein de ces populations gynodioïques. D'une part, les femelles peuvent réallouer les ressources non utilisées pour la production de pollen et peuvent par conséquent produire plus d'ovules. D'autre part, la reproduction des femelles ne peut se faire que par allo-fécondation alors que les hermaphrodites, peuvent se reproduire à la fois par auto- et allo-fécondation. L'autofécondation s'accompagne en général d'une diminution de fitness de la descendance relativement à la progéniture issue d'allo-fécondation ; ce phénomène est connu sous le nom de dépression de consanguinité. Cette thèse avait pour but de mettre en évidence une éventuelle dépression de consanguinité chez Silene vulgaris, une espèce gynodioïque. Des hermaphrodites, issus de trois vallées alpines, ont été auto- et allo¬fécondés sur deux générations successives. La dépression de consanguinité pouvant s'exprimer à tous les stades de vie d'un individu, plusieurs traits de fitness, allant du nombre de graines par fruit à la production de gamètes ont été mesurés sur différents stades de vie successifs. L'estimation de la dépression de consanguinité totale atteignait des valeurs allant de 0.52 à 0.76 selon la vallée considérée, ce qui indiquerait que les hermaphrodites ont tout intérêt à limiter l'autofécondation et que les femelles ne devraient pas avoir de peine à subsister dans les vallées étudiées. Par la même occasion des mécanismes diminuant la purge potentielle du fardeau génétique, et permettant ainsi le maintien du « niveau » de dépression de consanguinité et par conséquence le maintien de la gynodïoécie ont été mis en évidence. En effet, nos résultats montrent que la dépression de consanguinité s'exprimait tard dans le cycle de vie permettant ainsi à un certain nombre individus consanguins de transmettre leurs allèles délétères à la génération suivante. D'autre part, la croissance in vivo des tubes polliniques d'auto-pollen était plus lente que celle de l'allo-pollen et donc en situation de compétition directe, les ovules devraient plutôt être issus d'allo-fécondation, diminuant ainsi les chances de purges d'allèles délétères. Enfin, l'apparition de femelles dans la progéniture d'hermaphrodites autofécondés diminue aussi les chances de purge d'allèles délétères. Il nous a été impossible de déterminer si l'apparition de femelles dans la descendance d'hermaphrodites autofécondés était due au déterminisme génétique du sexe ou si la différence de sexe ratio entre la descendance auto- et allo-fécondée était due à une éventuelle dépression de consanguinité inhibant la production de pollen. Nous avons observé que S. vulgaris ne présentaient pas uniquement des hermaphrodites et des femelles mais aussi toute sorte d'individus intermédiaires avec un nombre variable d'étamines viables. Nous avons pu mettre' en évidence des corrélations positives entre (1) la différence de sexe ratio (la proportion d'individus produisant du pollen) entre individus consanguins et non consanguins et une estimation de la dépression de consanguinité pour le nombre d'étamines viables d'individus produisant du pollen, ainsi qu'entre (2) la dépression de consanguinité pour le nombre d'étamines viables et celle estimée pour la viabilité du pollen. Chaque corrélation indique soit l'effet d'un (ou plusieurs) gène(s) pléiotropique(s), soit un déséquilibre de liaison entre les gènes. En considérant que ces corrélations sont le résultat d'effet pléiotropiques, la relation entre le nombre d'étamines viables par fleur et la viabilité du pollen, indiquerait un effet négatif de la consanguinité sur la production et la viabilité du pollen due partiellement à un gène majeur. La seconde corrélation indiquerait soit que les gènes responsables de la détermination du sexe agissent aussi sur l'expression de la fonction mâle soit que l'expression du sexe est sujette à la dépression de consanguinité, ou encore un mélange des deux. Aux regards de ces résultats, Silene vulgaris s'est avéré être un bon modèle de compréhension de l'évolution des systèmes de reproduction vers la séparation des sexes.

Influence of changes in crop cultivation areas on pollen contents of honey

Selostus: Viljelyalojen muutosten vaikutus hunajan siitepölysisältöön

In-vivo performance of high-density collagen gel tubes for urethral regeneration in a rabbit model.

Congenital malformations or injuries of the urethra can be treated using existing autologous tissue, but these procedures are sometimes associated with severe complications. Therefore, tissue engineering may be advantageous for generating urethral grafts. We evaluated engineered high-density collagen gel tubes as urethral grafts in 16 male New Zealand white rabbits. The constructs were either acellular or seeded with autologous smooth muscle cells, isolated from an open bladder biopsy. After the formation of a urethral defect by excision, the tissue-engineered grafts were interposed between the remaining urethral ends. No catheter was placed postoperatively. The animals were evaluated at 1 or 3 months by contrast urethrography and histological examination. Comparing the graft caliber to the control urethra at 3 months, a larger caliber was found in the cell-seeded grafts (96.6% of the normal caliber) than in the acellular grafts (42.3%). Histology of acellular and cell-seeded grafts did not show any sign of inflammation, and spontaneous regrowth of urothelium could be demonstrated in all grafts. Urethral fistulae, sometimes associated with stenosis, were observed, which might be prevented by urethral catheter application. High-density collagen gel tubes may be clinically useful as an effective treatment of congenital and acquired urethral pathologies.

Gravity-driven slug motion in capillary tubes

The velocity of a liquid slug falling in a capillary tube is lower than predicted for Poiseuille flow due to presence of menisci, whose shapes are determined by the complex interplay of capillary, viscous, and gravitational forces. Due to the presence of menisci, a capillary pressure proportional to surface curvature acts on the slug and streamlines are bent close to the interface, resulting in enhanced viscous dissipation at the wedges. To determine the origin of drag-force increase relative to Poiseuille flow, we compute the force resultant acting on the slug by integrating Navier-Stokes equations over the liquid volume. Invoking relationships from differential geometry we demonstrate that the additional drag is due to viscous forces only and that no capillary drag of hydrodynamic origin exists (i.e., due to hydrodynamic deformation of the interface). Requiring that the force resultant is zero, we derive scaling laws for the steady velocity in the limit of small capillary numbers by estimating the leading order viscous dissipation in the different regions of the slug (i.e., the unperturbed Poiseuille-like bulk, the static menisci close to the tube axis and the dynamic regions close to the contact lines). Considering both partial and complete wetting, we find that the relationship between dimensionless velocity and weight is, in general, nonlinear. Whereas the relationship obtained for complete-wetting conditions is found in agreement with the experimental data of Bico and Quere [J. Bico and D. Quere, J. Colloid Interface Sci. 243, 262 (2001)], the scaling law under partial-wetting conditions is validated by numerical simulations performed with the Volume of Fluid method. The simulated steady velocities agree with the behavior predicted by the theoretical scaling laws in presence and in absence of static contact angle hysteresis. The numerical simulations suggest that wedge-flow dissipation alone cannot account for the entire additional drag and that the non-Poiseuille dissipation in the static menisci (not considered in previous studies) has to be considered for large contact angles.

Graphitized carbon black in quartz tubes for the sampling of indoor air nicotine and analysis by microwave thermal desorption-capillary gas chromatography

Nicotine in a smoky indoor air environment can be determined using graphitized carbon black as a solid sorbent in quartz tubes. The temperature stability, high purity, and heat absorption characteristics of the sorbent, as well as the permeability of the quartz tubes to microwaves, enable the thermal desorption by means of microwaves after active sampling. Permeation and dynamic dilution procedures for the generation of nicotine in the vapor phase at low and high concentrations are used to evaluate the performances of the sampler. Tube preparation is described and the microwave desorption temperature is measured. Breakthrough volume is determined to allow sampling at 0.1-1 L/min for definite periods of time. The procedure is tested for the determination of gas and paticulate phase nicotine in sidestream smoke produced in an experimental chamber.

Development of a PC Tool for Estimating Pressure Drops in Forced-convection Boiler Tubes

Kaksifaasivirtauksen kuvaamiseen käytettävät mallit, ja menetelmät kaksifaasivirtauksen painehäviön määrittämiseksi kehittyvät yhä monimutkaisimmiksi. Höyrystinputkissa tapahtuvien painehäviöiden arvioinnin vaatiman laskennan suorittamiseksi tietokoneohjelman kehittäminen on välttämätöntä. Tässä työssä on kehitetty itsenäinen PC-ohjelma painehäviöiden arvioimiseksi pakotetulle konvektiovirtaukselle pystysuorissa höyrykattilan höyrystinputkissa. Veden ja vesihöyryn aineominaisuuksien laskentaan käytetään IAPWS-IF97 –yhtälökokoelmaa sekä muita tarvittavia IAPWS:n suosittelemia yhtälöitä. Höyrystinputkessa kulloinkin vallitsevan virtausmuodon määrittämiseen käytetään sovelluskelpoisia virtausmuotojen välisiä rajoja kuvaavia yhtälöitä. Ohjelmassa käytetään painehäviön määritykseen kirjallisuudessa julkaistuja yhtälöitä, virtausmuodosta riippuen, alijäähtyneelle virtaukselle, kupla-, tulppa- ja rengasvirtaukselle sekä tulistetun höyryn virtaukselle. Ohjelman laskemia painehäviöarvioita verrattiin kirjallisuudesta valittuihin mittaustuloksiin. Laskettujen painehäviöiden virhe vaihteli välillä –19.5 ja +23.9 %. Virheiden itseisarvojen keskiarvo oli 12.8 %.

In vitro pollen germination and pollen viability in passion fruit (Passiflora spp.)

The use of Passiflora species for ornamental purposes has been recently developed, but little is known about pollen viability and the potential for crossing different species. The objective of this study was to evaluate the pollen viability of six Passiflora species collected from different physiological stages of development through in vitro germination and histochemical analysis using dyes. The pollen was collected in three stages (pre-anthesis, anthesis and post-anthesis). Three compositions of culture medium were used to evaluate the in vitro germination, and two dyes (2,3,5-triphenyltetrazolium chloride, or TTC, and Lugol's solution) were used for the histochemical analysis. The culture medium containing 0.03% Ca(NO3) 4H2O, 0.02% of Mg(SO4 ).7H2O, 0.01% of KNO3, 0,01% of H3BO3, 15% sucrose, and 0.8% agar, pH 7.0, showed a higher percentage of pollen grains germinated. Anthesis is the best time to collect pollen because it promotes high viability and germination. The Lugol's solution and TTC dye overestimated the viability of pollen, as all accessions showed high viability indices when compared with the results obtained in vitro.

Materials selection for superheater tubes in municipal solid waste incineration plants

Corrosion reduces the lifetime of municipal solid waste incineration (MSWI) superheater tubes more than any other cause. It can be minimized by the careful selection of those materials that are most resistant to corrosion under operating conditions. Since thousands of different materials are already known and many more are developed every year, here the selection methodology developed by Prof. Ashby of the University of Cambridge was used to evaluate the performance of different materials to be used as MSWI superheater tubes. The proposed materials can operate at steam pressures and temperatures over 40 bars and 400ºC, respectively. Two case studies are presented: one makes a balanced selection between mechanical properties and cost per thermal unit; and the other focuses on increasing tube lifetime. The balanced selection showed that AISI 410 martensitic stainless steel (wrought, hard tempered) is the best candidate with a good combination of corrosion resistance, a relatively low price (0.83-0.92 e/kg) and a good thermal conductivity (23-27 W/m K). Meanwhile, Nitronic 50/XM-19 stainless steel is the most promising candidate for longterm selection, as it presents high corrosion resistance with a relatively low price (4.86-5.14 e/kg) compared to Ni-alloys.

Relationship between botanical origin and antioxidants vitamins of bee-collected pollen

This study quantified vitamin C, E and β-carotene in samples of fresh bee-collected pollen and correlating them with the botanical origin. Vitamin content varied between 13.5 and 42.5 µg/g for vitamin E; 56.3 and 198.9 µg/g for β-carotene and 273.9 and 560.3 µg/g for vitamin C. It was concluded that the botanical origin and collecting season influenced the vitamin contents. There is a relationship between the vitamins and its botanical origin: Raphanus sp and Macroptilium sp, Mimosa caesalpineafolia with β-carotene; Raphanus sp, Eucalyptus sp, Macroptilium sp, Mimosa caesalpineafolia with vitamin E and Anadenanthera sp, Arecaceae type and Philodendron sp with vitamin C.

Stability of antioxidants vitamins in bee pollen samples

This study evaluated the stability of vitamins C, E and β-carotene in six samples of bee pollen after their process, and in a one-year period of storage. After the pollen's process, there was a 67.1% increase for vitamin C (p <0.05), an 18.7% loss for vitamin E and 15.6% for β-carotene. Storage in freezer was the most efficient condition for the vitamins conservation; the loss in storage at room temperature (exposed or protected from light) was similar. Vitamin E appears to be better preserved during storage when compared to vitamin C and β-carotene.

REPRODUCTIVE SYSTEM AND POLLEN FLOW IN PROGENIES OF Qualea grandiflora Mart., A TYPICAL SPECIES OF THE BRAZILIAN CERRADO

This study analyzed the reproductive system and the pollen dispersion pattern of Qualea grandiflora progenies. This is a typical species from the Brazilian Cerrado about which there are not too many studies from the genetics point of view. The study was conducted in an area of 2.2 hectares located in the Conservation Unit managed by the Forest Institute of the state of São Paulo, Brazil (Assis State Forest). Total genomic DNA of 300 seeds from 25 plants (12 seeds from each plant) was extracted and amplified using specific primers to obtain microsatellite markers. Results showed that selfing is frequent among adults and progenies, and the species reproduces by outcrossing between related and unrelated individuals (0.913). The single-locus outcrossing rate was 0.632, which indicates that mating between unrelated individuals is more frequent than between related plants. The selfing rate was low (0.087), that is, the species is allogamous and self-fertilization is reduced. About 35% of the plants in the progenies were full-sibs, and about 57%, half-sibs. Besides, about 8% of the progenies were selfing siblings. The genetic differentiation coefficient within progenies was 0.139, whereas the fixation rate was about 27%. The estimate of the effective size revealed that the genetic representativeness of descent was lower than expected in random mating progenies: The analyzed samples corresponded to only 13.2 individuals of an ideal panmictic population. In environmental recovery programs, seeds, preferably from different fruits, should be collected from 95 trees to preserve the genetic diversity of the species.