Valutazione delle proprietà di diverse misure d'intensità dello scuotimento sismico

La progettazione sismica negli ultimi anni ha subito una forte trasformazione, infatti con l’introduzione delle nuove normative tecniche si è passati dallo svolgere una verifica delle capacità locali dei singoli elementi ad una progettazione con un approccio di tipo probabilistico, il quale richiede il soddisfacimento di una serie di stati limite ai quali viene attribuita una certa probabilità di superamento. La valutazione dell’affidabilità sismica di una struttura viene condotta di solito attraverso metodologie che prendono il nome di Probabilistic Seismic Design Analysis (PSDA) in accordo con la procedura del Performance Based Earthquake Engineering (PBEE). In questa procedura di tipo probabilistico risulta di notevole importanza la definizione della misura d’intensità sismica, la quale può essere utilizzata sia come predittore della risposta strutturale a fronte di un evento sismico, sia come parametro per definire la pericolosità di un sito. Queste misure d’intensità possono essere definite direttamente dalla registrazione dell’evento sismico, come ad esempio l’accelerazione di picco del terreno, oppure sulla base della risposta, sia lineare che non, della struttura soggetta a tale evento, ovvero quelle che vengono chiamate misure d’intensità spettrali. Come vedremo è preferibile l’utilizzo di misure d’intensità che soddisfino certe proprietà, in modo da far risultare più efficace possibile le risoluzione del problema con l’approccio probabilistico PBEE. Obbiettivo principale di questa dissertazione è quello di valutare alcune di queste proprietà per un gran numero di misure d’intensità sismiche a partire dai risultati di risposta strutturale ottenuti mediante analisi dinamiche non lineari nel tempo, condotte per diverse tipologie di strutture con differenti proprietà meccaniche.

Diversity and local democracy. The case of Republic of Macedonia - implications of ethnic diversity on municipal decision making and organizational performance

This research seeks to review the level of knowledge achieved in interpreting the relationship between the ethnic diversity at the workplace in the public sector and the organizational performance; as well as seeks to contribute in understanding the implications of this relationship. The study commenced with investigating the academic research in the relevant area addressing the following research questions: (a) How are diversity management and organizational performance conceptualized? (b) What are the existing findings of research concerning diversity at the workplace in the public organizations and organizational performance? (c) What factors intervene the relationship between the diversity and organizational performance? Based on the findings from the review of the academic research, this study seeks to contribute in understanding the ethnic diversity – performance relationship and its mplications at the local level in the Macedonian context. The reform process in Macedonia as a multicultural society, where for many years, inter-ethnic relations have been one of the most sensitive political issues, affecting both the stability of the country and the progress, focused mainly on the implementation of the decentralization and inclusion of ethnic minorities in the decision making process. With the implementation of the Ohrid Framework Agreement workforce at the units of local self-government in Republic of Macedonia is becoming more balanced with respect to ethnic minorities, with more workforce participation than ever by Albanians, Turks, Roma and other minorities. As public organizations at local level become more diverse along ethnic lines, it makes sense to pay more attention to how different ethnic groups interact with one another at work. Thus it gives additional importance on the research question addressed in the study and gives significance of the research in a broader scope.

Fastener-Based Computational Models of Cold-Formed Steel Shear Walls

Cold-formed steel (CFS) combined with wood sheathing, such as oriented strand board (OSB), forms shear walls that can provide lateral resistance to seismic forces. The ability to accurately predict building deformations in damaged states under seismic excitations is a must for modern performance-based seismic design. However, few static or dynamic tests have been conducted on the non-linear behavior of CFS shear walls. Thus, the purpose of this research work is to provide and demonstrate a fastener-based computational model of CFS wall models that incorporates essential nonlinearities that may eventually lead to improvement of the current seismic design requirements. The approach is based on the understanding that complex interaction of the fasteners with the sheathing is an important factor in the non-linear behavior of the shear wall. The computational model consists of beam-column elements for the CFS framing and a rigid diaphragm for the sheathing. The framing and sheathing are connected with non-linear zero-length fastener elements to capture the OSB sheathing damage surrounding the fastener area. Employing computational programs such as OpenSees and MATLAB, 4 ft. x 9 ft., 8 ft. x 9 ft. and 12 ft. x 9 ft. shear wall models are created, and monotonic lateral forces are applied to the computer models. The output data are then compared and analyzed with the available results of physical testing. The results indicate that the OpenSees model can accurately capture the initial stiffness, strength and non-linear behavior of the shear walls.

Simple Estimation of Incident HIV Infection Rates in Notification Cohorts Based on Window Periods of Algorithms for Evaluation of Line-Immunoassay Result Patterns

Background Tests for recent infections (TRIs) are important for HIV surveillance. We have shown that a patient's antibody pattern in a confirmatory line immunoassay (Inno-Lia) also yields information on time since infection. We have published algorithms which, with a certain sensitivity and specificity, distinguish between incident (< = 12 months) and older infection. In order to use these algorithms like other TRIs, i.e., based on their windows, we now determined their window periods. Methods We classified Inno-Lia results of 527 treatment-naïve patients with HIV-1 infection < = 12 months according to incidence by 25 algorithms. The time after which all infections were ruled older, i.e. the algorithm's window, was determined by linear regression of the proportion ruled incident in dependence of time since infection. Window-based incident infection rates (IIR) were determined utilizing the relationship ‘Prevalence = Incidence x Duration’ in four annual cohorts of HIV-1 notifications. Results were compared to performance-based IIR also derived from Inno-Lia results, but utilizing the relationship ‘incident = true incident + false incident’ and also to the IIR derived from the BED incidence assay. Results Window periods varied between 45.8 and 130.1 days and correlated well with the algorithms' diagnostic sensitivity (R2 = 0.962; P<0.0001). Among the 25 algorithms, the mean window-based IIR among the 748 notifications of 2005/06 was 0.457 compared to 0.453 obtained for performance-based IIR with a model not correcting for selection bias. Evaluation of BED results using a window of 153 days yielded an IIR of 0.669. Window-based IIR and performance-based IIR increased by 22.4% and respectively 30.6% in 2008, while 2009 and 2010 showed a return to baseline for both methods. Conclusions IIR estimations by window- and performance-based evaluations of Inno-Lia algorithm results were similar and can be used together to assess IIR changes between annual HIV notification cohorts.

Differences in performance for quality of care indicators for acute myocardial infarction (AMI) across various hospital categories in Texas

The study analyzed Hospital Compare data for Medicare Fee-for-service patients at least 65 years of age to determine whether hospital performance for AMI outcome and processes of care measures differ amongst Texas hospitals with respect to ownership status (for profit vs. not-for-profit), academic status (teaching vs. non-teaching) and geographical setting (rural vs. urban). ^ The study found a statistically significant difference between for-profit and not-for-profit hospitals in four process-of-care measures (aspirin at discharge, P=0.028; ACE or ARB inhibitor for LSVD, P=0.048; Smoking cessation advice: P=0.034; outpatients who got aspirin with 24 hours of arrival in the ED, P=0.044). No significant difference in performance was found between COTH-member teaching and non-teaching hospitals for any of the eight process-of-care measures or the two outcome measures for AMI. The study was unable to compare performance based on geographic setting of hospitals due to lack of sufficient data for rural hospitals. ^ The results of the study suggest that for-profit Texas hospitals might be slightly better than not-for –profit hospitals at providing possible heart attack patients with certain processes of care.^

Implementation of safety based incentives in Public Private Partnerships (PPPs): an empirical analysis for the case of Spain

Public Private Partnerships (PPPs) are mostly implemented to circumvent budgetary constraints, and to encourage efficiency and quality in the provision of public infrastructure in order to reach social welfare. One of the ways of reaching the latter objective is by the introduction of performance based standards tied to bonuses and penalties to reward or punish the performance of the contractor. This paper focuses on the implementation of safety based incentives in PPPs in such a way that the better the safety outcome the greater larger will be the economic reward to the contractor. The main aim of this paper is to identify whether the incentives to improve road safety in PPPs are ultimately effective in improving safety ratios in Spain. To that end, Poisson and negative binomial regression models have been applied using information of motorways of the Spanish network of 2006. The findings indicate that even though road safety is highly influenced by variables that are not much controllable by the contractor such as the Average Annual Daily Traffic and the percentage of heavy vehicles, the implementation of safety incentives in PPPs has a positive influence in the reduction of fatalities, injuries and accidents.

Analysis and validation of CFD wind farm models in complex terrain. Effects induced by topography and wind turbines

Wind farms have been extensively simulated through engineering models for the estimation of wind speed and power deficits inside wind farms. These models were designed initially for a few wind turbines located in flat terrain. Other models based on the parabolic approximation of Navier Stokes equations were developed, making more realistic and feasible the operational resolution of big wind farms in flat terrain and offshore sites. These models have demonstrated to be accurate enough when solving wake effects for this type of environments. Nevertheless, few analyses exist on how complex terrain can affect the behaviour of wind farm wake flow. Recent numerical studies have demonstrated that topographical wakes induce a significant effect on wind turbines wakes, compared to that on flat terrain. This circumstance has recommended the development of elliptic CFD models which allow global simulation of wind turbine wakes in complex terrain. An accurate simplification for the analysis of wind turbine wakes is the actuator disk technique. Coupling this technique with CFD wind models enables the estimation of wind farm wakes preserving the extraction of axial momentum present inside wind farms. This paper describes the analysis and validation of the elliptical wake model CFDWake 1.0 against experimental data from an operating wind farm located in complex terrain. The analysis also reports whether it is possible or not to superimpose linearly the effect of terrain and wind turbine wakes. It also represents one of the first attempts to observe the performance of engineering models compares in large complex terrain wind farms.

Survey on integration of Applied Geology and Geomorphology in Civil Engineering curricula in the framework of the European Higher Education Area (EHEA) by using practical trips

The engineer must have sufficient theoretical knowledge to be applied to solve specific problems, with the necessary capacity to simplify these approaches, and taking into account factors such as speed, simplicity, quality and economy. In Geology, its ultimate goal is the exploration of the history of the geological events through observation, deduction, reasoning and, in exceptional cases by the direct underground exploration or experimentation. Experimentation is very limited in Geology. Reproduction laboratory of certain phenomena or geological processes is difficult because both time and space become a large scale. For this reason, some Earth Sciences are in a nearly descriptive stage whereas others closest to the experimental, Geophysics and Geochemistry, have assimilated progress experienced by the physics and chemistry. Thus, Anglo-Saxon countries clearly separate Engineering Geology from Geological Engineering, i.e. Applied Geology to the Geological Engineering concepts. Although there is a big professional overlap, the first one corresponds to scientific approach, while the last one corresponds to a technological one. Applied Geology to Engineering could be defined as the Science and Applied Geology to the design, construction and performance of engineering infrastructures in and field geology discipline. There has been much discussion on the primacy of theory over practice. Today prevails the exaggeration of practice, but you get good workers and routine and mediocre teachers. This idea forgets too that teaching problem is a problem of right balance. The approach of the action lines on the European Higher Education Area (EHEA) framework provides for such balance. Applied Geology subject represents the first real contact with the physical environment with the practice profession and works. Besides, the situation of the topic in the first trace of Study Plans for many students implies the link to other subjects and topics of the career (tunnels, dams, groundwater, roads, etc). This work analyses in depth the justification of such practical trips. It shows the criteria and methods of planning and the result which manifests itself in pupils. Once practical trips experience developed, the objective work tries to know about results and changes on student’s motivation in learning perspective. This is done regardless of the outcome of their knowledge achievements assessed properly and they are not subject to such work. For this objective, it has been designed a survey about their motivation before and after trip. Survey was made by the Unidad Docente de Geología Aplicada of the Departamento de Ingeniería y Morfología del Terreno (Escuela Técnica Superior de Ingenieros de Caminos, Canales y Puertos, Universidad Politécnica de Madrid). It was completely anonymous. Its objective was to collect the opinion of the student as a key agent of learning and teaching of the subject. All the work takes place under new teaching/learning criteria approach at the European framework in Higher Education. The results are exceptionally good with 90% of student’s participation and with very high scores in a number of questions as the itineraries, teachers and visited places (range of 4.5 to 4.2 in a 5 points scale). The majority of students are very satisfied (average of 4.5 in a 5 points scale).

Performance of UV-enhanced PMMA fresnel lenses and impact on LCOE

Tiny increases in the transmittance of optical materials within a CPV module can have an important impact on the economy of a plant. This is certainly true in systems comprising multi-junction solar cells, whose high performance, based on a balanced photocurrent generation among the series-connected junctions, is very sensitive to spectrum variations. Every efficiency point gained causes not only an increase in the kilowatts hour produced, but a higher benefit on it, since the difference between electricity tariff and Levelized Cost of Electricity (LCOE) rises. This work studies the impact on the LCOE of a plant based on modules comprising PMMA lenses of two different types, standard UV blocking grade which is normally used for outdoor applications at high DNI climate and a specialty stabilized UV-enhanced transmittance acrylic (see Figure 1). Energy production will be compared for these two systems throughout the year at different sites to analyze when (season, time of the day) and where the usage of the enhanced PMMA is justified.

El nuevo escenario global y un modelo de negocio para la industria naval militar del 2025

Los retos y oportunidades a los que se enfrentan las organizaciones y administraciones de las primeras décadas del siglo XXI se caracterizan por una serie de fuerzas perturbadoras como la globalización, el avance de las tecnologías emergentes y el desequilibrio económico, que están actuando como impulsores de la transformación del mercado. La acción conjunta de estos factores está obligando a todas las empresas industriales a tener que trabajar con mayores y más exigentes niveles de productividad planteándose continuamente como mejorar y lograr satisfacer los requerimientos de los clientes. De esta situación surge la necesidad de volver a plantearse de nuevo ¿quién es el cliente?, ¿qué valora el cliente? y ¿cómo se pueden generan beneficios sostenibles? La aplicación de esta reflexión a la industria naval militar marca los objetivos a los que esta tesis doctoral busca dar respuesta. El primer objetivo, de carácter general, consiste en la definición de un modelo de negocio sostenible para la industria naval militar del 2025 que se adapte a los requisitos del cliente y al nuevo escenario político, económico, social, tecnológico y ambiental que rodea esta industria. El segundo objetivo, consecuencia del modelo general, trata de desarrollar una metodología para ejecutar programas de apoyo al ciclo de vida del “buque militar”. La investigación se estructura en cuatro partes: en la primera se justifica, por un lado, la necesidad del cambio de modelo y por otro se identifican los factores estructurantes para la definición del modelo. La segunda parte revisa la literatura existente sobre uno de los aspectos básicos para el nuevo modelo, el concepto Producto-Servicio. La tercera parte se centra totalmente en la industria naval militar estudiando los aspectos concretos del sector y, en base al trabajo de campo realizado, se identifican los puntos que más valoran las Marinas de Guerra y como estas gestionan al buque militar durante todo su ciclo de vida. Por último se presentan los principios del modelo propuesto y se desarrollan los pilares básicos para la ejecución de proyectos de Apoyo al Ciclo de Vida (ACV). Como resultado de la investigación, el modelo propuesto para la industria naval militar se fundamenta en once principios: 1. El buque militar (producto de alto valor añadido) debe ser diseñado y construido en un astillero del país que desarrolla el programa de defensa. 2. El diseño tiene que estar orientado al valor para el cliente, es decir, se tiene que diseñar el buque militar para que cumpla su misión, eficaz y eficientemente, durante toda su vida operativa, asegurando la seguridad del buque y de las personas y protegiendo el medio ambiente de acuerdo con las regulaciones vigentes. 3. La empresa debe suministrar soluciones integrales de apoyo al ciclo de vida al producto. 4. Desarrollar y mantener las capacidades de integración de sistemas complejos para todo el ciclo de vida del buque militar. 5. Incorporar las tecnologías digitales al producto, a los procesos, a las personas y al propio modelo de negocio. 6. Desarrollar planes de actuación con el cliente domestico a largo plazo. Estos planes tienen que estar basados en tres premisas: (i) deben incluir el ciclo de vida completo, desde la fase de investigación y desarrollo hasta la retirada del buque del servicio; (ii) la demanda debe ser sofisticada, es decir las exigencias del cliente, tanto desde la óptica de producto como de eficiencia, “tiran” del contratista y (iii) permitir el mantenimiento del nivel tecnológico y de las capacidades industriales de la compañía a futuro y posicionarla para que pueda competir en el mercado de exportación. 7. Impulsar el sector militar de exportación mediante una mayor actividad comercial a nivel internacional. 8. Fomentar la multilocalización ya que representa una oportunidad de crecimiento y favorece la exportación posibilitando el suministro de soluciones integrales en el país destino. 9. Reforzar la diplomacia institucional como palanca para la exportación. 10. Potenciar el liderazgo tecnológico tanto en producto como en procesos con políticas activas de I + D+ i. 11. Reforzar la capacidad de financiación con soluciones innovadoras. El segundo objetivo de esta tesis se centra en el desarrollo de soluciones integrales de Apoyo al Ciclo de Vida (ACV). La metodología planteada trata de minimizar la brecha entre capacidades y necesidades a lo largo de la vida operativa del barco. Es decir, el objetivo principal de los programas de ACV es que la unidad conserve durante toda su vida operativa, en términos relativos a las tecnologías existentes, las capacidades equivalentes a las que tendrá cuando entre en servicio. Los ejes de actuación para conseguir que un programa de Apoyo al Ciclo de Vida cumpla su objetivo son: el diseño orientado al valor, la ingeniería de Apoyo al Ciclo de Vida, los proyectos de refresco de tecnología, el mantenimiento Inteligente y los contratos basados en prestaciones. ABSTRACT On the first decades of the 21st century, organizations and administrations face challenges and come across opportunities threatened by a number of disruptive forces such as globalization, the ever-changing emerging technologies and the economic imbalances acting as drivers of the market transformation. This combination of factors is forcing all industrial companies to have more and higher demanding productivity levels, while bearing always in mind how to improve and meet the customer’s requirements. In this situation, we need to question ourselves again: Who is the customer? What does the customer value? And how can we deliver sustainable economic benefits? Considering this matter in a military naval industry framework sets the goals that this thesis intends to achieve. The first general goal is the definition of a new sustainable business model for the 2025 naval industry, adapted to the customer requirements and the new political, economic, social, technological and environmental scenario. And the second goal that arises as a consequence of the general model develops a methodology to implement “warship” through life support programs. The research is divided in four parts: the first one justifies, on the one hand, the need to change the existing model and, on the other, identifies the model structural factors. On the second part, current literature regarding one of the key issues on the new model (the Product-Service concept) is reviewed. Based on field research, the third part focuses entirely on military shipbuilding, analyzing specific key aspects of this field and identifying which of them are valued the most by Navies and how they manage through life cycles of warships. Finally, the foundation of the proposed model is presented and also the basic grounds for implementing a Through Life Support (TLS) program are developed. As a result of this research, the proposed model for the naval industry is based on eleven (11) key principles: 1. The warship (a high added value product) must be designed and built in a shipyard at the country developing the defense program. 2. Design must be customer value oriented, i.e.warship must be designed to effectively fulfill its mission throughout its operational life, ensuring safety at the ship and for the people and protecting the environment in accordance with current regulations. 3. The industry has to provide integrated Through Life Support solutions. 4. Develop and maintain integrated complex systems capabilities for the entire warship life cycle. 5. Introduce the product, processes, people and business model itself to digital technologies. 6. Develop long-term action plans with the domestic customer. These plans must be based on three premises: (i) the complete life cycle must be included, starting from the research and development stage throughout the ship’s disposal; (ii) customer demand has to be sophisticated, i.e. customer requirements, both from the efficiency and product perspective, "attract" the contractor and (iii) technological level and manufacturing capabilities of the company in the future must be maintained and a competitive position on the export market has to be achieved. 7. Promote the military exporting sector through increased international business. 8. Develop contractor multi-location as it entails an opportunity for growth and promote export opportunities providing integrated solutions in the customer's country. 9. Strengthen institutional diplomacy as a lever for export. 10. Promote technological leadership in both product and processes with active R & D & I policies (Research & Development & Innovation) 11. Strengthen financing capacity through innovative solutions. The second goal of this thesis is focused on developing integrated Through Life Support (TLS) solutions. The proposed methodology tries to minimize the gap between needs and capabilities through the ship operational life. It means, the main TLS program objective is to maintain the ship’s performance and capabilities during operational life, in relative terms to current technologies, equivalent to those the ship had when it entered service. The main actions to fulfill the TLS program objectives are: value-oriented design, TLS engineering, technology updating projects, intelligent maintenance and performance based contracts.

Onsite Wastewater Model Performance Code Implementation Plan

As the population of Colorado continues to grow, the impacts from individual sewage disposal systems, or onsite wastewater systems (OWS), are becoming more apparent. Increased use of OWS impacts not only water quality but land use and development as well. These impacts have led to the need for a new generation of wastewater regulations in the state, a transition from the historic prescriptive requirements to a more progressive, performance-based system. A performance-based system will allow smarter growth, improved water quality, and cost savings for both the regulatory agencies and the OWS industry in Colorado. This project outlines the challenges and essential elements required to make this transition, and provides guidance on how to meet the challenges and overcome barriers to implementing a performance code in Colorado.

Performance Septic Systems: Does an Advanced Septic System Provide Adequate Treatment on Black Hammock Island and is there Adequate Regulatory Policy to Ensure Integrity?

This project determined if the performance based septic system, proposed for a development on Black Hammock Island in Jacksonville, Florida, is the best choice to prevent environmental contamination from septic tanks and if adequate regulatory policy exists. Research shows a central wastewater treatment plant provides the most efficient pollutant removal but can be cost prohibitive. This project found performance based systems surpasses conventional septic system performance and are more suited and economical to remote areas without sewer service. This project finds current regulations to be inadequate and supports ordinance changes proposed by the Mayor of Jacksonville to enhance the current policy and provide more adequate and meaningful regulation.

Socioemotional Wealth, Ambidexterity, and Family Firm Performance: An Empirical Study

While family business literature agrees that family firms are driven by both non-economic and financial motives, it is unclear how the prioritization of socioemotional wealth (SEW) over financial considerations affects family firms' financial performance. Based on a sample of 343 family firm owners from German-speaking Europe, this study reveals a significant and positive relationship between the firm owners' SEW considerations and their family businesses' financial performance. This relationship, in turn, is found to be mediated by organizational ambidexterity. A fine-grained analysis of the different SEW dimensions indicates that this pattern may be driven by two elements of socioemotional wealth only (family members' identification with the firm and emotional attachment). Our findings demonstrate that business families do not necessarily face a trade-off when prioritizing the preservation of their SEW over stabilizing or improving the financial performance of their business. The study enriches several streams of literature and opens up numerous avenues for future research.

Design Expressions and Dynamic Evaluation of CFST Bridges Subjected to Seismic Hazards

Thesis (Ph.D.)--University of Washington, 2016-06

Work stressors, strains and hospital unit performance

Hospital employees who work in an environment with zero tolerance to error, face several stressors that may result in psychological, physiological, and behavioural strains, and subsequently, in suboptimal performance. This thesis includes two studies which investigate the stressor-to-strain-to-performance relationships in hospitals. The first study is a cross-sectional, multi-group investigation based on secondary data from 65,142 respondents in 172 acute/specialist UK NHS trusts. This model proposes that senior management leadership predicts social support and job design which, in turn, moderate stressors-to-strains across team structure. The results confirm the model's robustness. Regression analysis provides support for main effects and minimal support for moderation hypotheses. Therefore, based on its conclusions and inherent limitations, study one lays the framework for study two. The second study is a cross-sectional, multilevel investigation of the strain-reducing effects of social environment on externally-rated unit-level performance based on primary data from 1,137 employees in 136 units, in a hospital in Malta. The term "social environment" refers to the prediction of the moderator variables, which is to say, social support and decision latitude/control, by transformational leadership and team climate across hospital units. This study demonstrates that transformational leadership is positively associated with social support, whereas team climate is positively associated with both moderators. At the same time, it identifies a number of moderating effects which social support and decision latitude/control, both separately and together, had on specific stressor-to-strain relationships. The results show significant mediated stressor-to-strain-to-performance relationships. Furthermore, at the higher level, unit-level performance is positively associated with shared unit-level team climate and with unit-level vision, the latter being one of the five sub-dimension of transformational leadership. At the same time, performance is also positively related to both transformational leadership and team climate when the two constructs are tested together. Few studies have linked the buffering effects of the social environment in occupational stress with performance. Therefore, this research strives to make a significant contribution to the occupational stress and performance literature with a focus on hospital practice. Indeed, the study highlights the wide-ranging and far-reaching implications that these findings provide for theory, management, and practice.