Estudo da produção de pectinase por fermentação em estado sólido utilizando pedúnculo de caju como substrato

Pectinolytic enzymes, or simply pectinases, are complex enzymes that degrade pectic polymers. They have many uses, such as fruit juice extraction and purification, textile fiber treatment and vegetal oil extraction. The aim of this work was to study the kinetics of pectinases production by solid-state fermentation, using dry cashew apple residue as substrate and the microorganism Aspergillus niger CCT 0916. The influence of the initial medium moisture and medium supplementation with a source of nitrogen and phosphorus was evaluated using the factorial experimental planning and response surface methodology. Ammonia sulphate and potassium phosphate were used as nitrogen and phosphorus source, respectively. The variables time of contact (T) and ratio volume solvent/fermented medium (RZ), in systems with and without agitation, were evaluated in order to study the best extraction condition of the produced enzyme. Washed and unwashed cashew apple residues were tested as the growth medium. The unwashed residue was obtained by drying the residue after the extraction of the juice, while the washed residue was obtained by water washing 5 times using the proportion of 1 kg pulp/2 liters of water. Samples were taken every 12 hours for moisture content, pH, protein, reducing sugars, polygalacturonase activity (PG) and viscosity reduction. The physical-chemical composition of the residues had different sugar and pectin levels. For the unwashed residue, the peak activity was reached with 40% of initial moisture content, 1% of nitrogen supplementation without phosphorus addition after 30 hours of process. These conditions led to 16 U/g of PG activity and 82% of viscosity reduction. The calculated models reached similar values to the experimental ones in the same process conditions: 15.55 U/g of PG and 79.57% of viscosity eduction. Similarly, the greatest enzyme production for washed residue was reached with 40% initial moisture content, 1% nitrogen supplementation without phosphorus addition after 22 hours of cultivation. In this condition it was obtained polygalacturonase activity of 9.84 U/g and viscosity reduction of 81.36%. These values are close to experimental values that were of 10.1 U/g and 81%, respectively. The conditions that led to the best PG activity results was the agitated one and the best extraction condition was obtained with 100 minutes of solvent/medium contact and RZ of 5 (mL/g)

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Pectinase production by Penicillium viridicatum RFC3 by solid state fermentation using agricultural wastes and agro-industrial by-products

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Screening of bacterial strains for pectinolytic activity: characterization of the polygalacturonase produced by Bacillus sp

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Chemical and sensory characteristics of pulp and peel 'cajá-manga' (Spondias cytherea Sonn.) jelly

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência de pré-influência de pré-tratamentos sobre a desidratação osmótica de carambolas

A desidratação osmótica (DO) de fatias de carambola (Averrhoa carambola L.) em solução de sacarose foi estudada, com o objetivo de otimizar o processo. Num primeiro conjunto de experimentos, aplicou-se revestimento de coberturas comestíveis (pectina ou pectina+amido) sobre as fatias, seguido de do em solução aquosa de sacarose (50%, p/p, 27°C). Num segundo conjunto, foi realizada secagem parcial da cobertura, em estufa, antes da DO. Num terceiro conjunto de experimentos testou-se a adição de CaCl2 na solução osmótica. A aplicação dos revestimentos antes da do não melhorou a eficiência (máxima perda água/ganho soluto) devido à grande retenção de umidade e à fácil impregnação de sacarose nos mesmos, enquanto que o tecido vegetal sem revestimento restringiu mais o ganho de soluto e propiciou maior saída de água. A utilização de CaCl2 a 0,04M, na própria solução osmótica de sacarose, melhorou ligeiramente a eficiência do processo, em relação à solução sem o sal. A do em solução de sacarose, sem e com a adição de CaCl2, geraram resultados positivos na qualidade sensorial da carambola em fatias, desidratadas em secador (60 e 70°C), em comparação com a fruta não tratada, sendo que a melhor temperatura de secagem foi 60°C.

Pectinase production by fungal strains in solid-state fermentation using agro-industrial bioproduct

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

CARACTERIZAÇÃO PÓS-COLHEITA DE SEIS CULTIVARES DE CARAMBOLA (Averrhoa carambola L.)

Avaliaram-se as qualidades física e química dos frutos de seis cultivares de carambola (Averrhoa carambola L.), propagadas pela Estação Experimental de Citricultura de Bebedouro, São Paulo, objetivando a obtenção de informações sobre a qualidade dos frutos produzidos nesta região. Foram utilizados frutos das cultivares Tean-ma, Fwang Tung, Arkin, Malásia, Golden Star e Nota-10. Os frutos foram analisados quanto à massa fresca, comprimento, largura, volume, porcentagem de suco, polpa e semente, número de sementes, coloração (L, Cromaticidade e ângulo Hue). Na polpa, determinou-se o pH, assim como o teor de umidade, sólidos solúveis totais (SST), acidez total titulável (ATT), vitamina C, açúcares solúveis totais e redutores, cinzas, proteína, pectina total e solúvel, e minerais (Ca, P, K, Mg, S, Cu, Fe, Mn e Zn). Os resultados foram avaliados estatisticamente através de um delineamento inteiramente casualizado e revelaram que os melhores frutos são os originários das cultivares Arkin, Tean-ma e Nota-10, pois são os maiores, os mais pesados e apresentam os maiores teores de sólidos solúveis totais (SST) e açúcares solúveis (AST), assim como boa relação SST/ATT. Os frutos da 'Arkin' mostraram coloração mais amarela, enquanto os da 'Golden Star' foram considerados de coloração mais clara, ou com maior translucidez. A textura foi menor nos frutos da 'Arkin', e se relacionou com a maior solubilização de suas pectinas

Conservação de pêssego 'Aurora-1' armazenados sob refrigeração

Avaliou-se o comportamento pós-colheita de pêssegos da cv. Aurora-1 armazenados sob refrigeração. Os frutos foram colhidos em dois estádios de maturação, verde maduro (de vez) e maduro. Os lotes foram armazenados em três temperaturas (2°C; 6°C e 12°C), por 35 dias, e avaliados a cada sete dias: quanto à coloração da casca, perda acumulada de massa fresca (PMF), firmeza (FIR), aparência, teores de acidez titulável (AT), sólidos solúveis (SS), açúcares solúveis (AS) e redutores (AR), pectina solúvel (PS) e total (PT), além da porcentagem de solubilização de pectinas (SOL). A menor temperatura de armazenamento elevou o tempo de prateleira dos pêssegos, e os frutos de vez apresentaram melhor aparência. A PMF demonstrou um gradiente em função do aumento da temperatura, e os frutos de vez apresentaram menor perda ao final do armazenamento sob todas as temperaturas, quando comparados aos maduros. A coloração da casca dos frutos de vez, a 2°C, teve pouca alteração, conferindo-lhes mudança de coloração de verde-amarelada para amarelo-clara; enquanto nas temperaturas de 6°C e 12°C esse gradiente foi mais intenso. O mesmo efeito foi verificado nos pêssegos maduros. A FIR sofreu efeito da temperatura, pois temperaturas menores sofreram redução mais lenta e AT dos pêssegos maduros foi superior aos de vez. Não houve influência dos tratamentos nos teores de SS, AS e AR. Os pêssegos 'Aurora-1' não demonstraram sensibilidade ao frio, e os de vez, armazenados a 2°C, tiveram vida útil de 35 dias.

Análise histoquímica foliar do amendoim: genótipos 'Tatu' e SO-909

Este trabalho teve por finalidade a análise histoquímica foliar de dois genótipos de amendoim (Arachis hypogaea L.), do tipo botânico Valência: SO-53 ('Tatu') e SO-909 (PI-259747), cuja literatura demonstra apresentarem respostas diferentes de resistência às principais moléstias fúngicas foliares do Brasil. Seções transversais das seguintes estruturas - pulvino, haste peciolar, raque, pulvínulo e folíolo - e seções paradérmicas de folíolos coletados em dois anos agrícolas consecutivos, foram analisadas quanto à presença de alcalóides, amido, calose, celulose pura, celulose com pectina, cera, cristais, cutina, lignina, mucilagem, óleo, resina, tanino e ureídeos (micrograma) por folíolo (grama). As diferenças qualitativas histoquímicas observadas nos diversos tecidos, como a freqüência de tanino, alcalóide, pectina e óleo, supostamente, podem ser responsáveis pela resistência ou suscetibilidade dos genótipos às moléstias fúngicas foliares. Para fins de caracterização, mostrou-se eficiente a avaliação de pureza de celulose.

Firmeza de mangas 'Palmer' tratadas com 1-metilciclopropeno e armazenadas sob refrigeração

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Bebida mista de extrato de soja e suco de amora: análises químicas e sensorial

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Processamento tecnológico e avaliação energética de geléia de acerola

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Clarificação de suco de laranja core wash por processo de flotação auxiliado por enzimas pectinolíticas e agentes clarificantes

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE