Avaliação da qualidade protéica de dois formulados em pó, à base de soja enriquecidos com zinco, selênio e magnésio para utilização em nutrição enteral

A partir de extrato solúvel de soja e extrato solúvel de soja desengordurado, foram desenvolvidos dois formulados em pó, os quais foram denominados: FPSA-formulado com extrato solúvel de soja (PSA) e FPS60-formulado com extrato solúvel de soja desengordurado (PS60). Além do PSA e PS60, outros produtos foram utilizados na elaboração dos formulados: clara de ovo desidratada, maltodextrina, óleo de soja, óleo de canola, gordura-de-coco, "mix" de vitaminas e minerais e estabilizante. Zinco, selênio e magnésio foram adicionados para atender a 200% das recomendações diárias sugeridas pela RDA. A avaliação da qualidade protéica foi conduzida por meio de ensaio biológico com animais experimentais, no qual foram analisados NPR, NPU e digestibilidade. Não houve diferença significativa entre o FPSA e FPS60, quanto ao NPR e NPU (p > 0,05), e o mesmo ocorreu em comparação com a caseína. Quanto à digestibilidade, os formulados apresentaram resultados semelhantes, porém inferiores aos da caseína. Os formulados mostraram bom valor biológico, pois apresentaram índices de qualidade protéica próximos aos da caseína.

Alterações químicas e nutricionais do grão-de-bico (Cicer arietinum L.) cru irradiado e submetido à cocção

O presente trabalho teve por objetivos analisar, em grãos não submetidos à irradiação, a composição centesimal e mineral, para verificar as alterações provocadas pela cocção. Em grãos crus e cozidos, não irradiados (controle) e irradiados (doses de 2, 4, 6, 8 e 10 kGy), foram realizadas também as análises de: disponibilidade de ferro in vitro, digestibilidade da proteína in vitro e perfil de aminoácidos. Os resultados das análises dos minerais demonstraram que ocorreu diminuição significativa (p<0,05) somente para o potássio com o processo de cocção. Na composição centesimal o teor de cinzas e dos carboidratos disponíveis foi significativamente (p<0,05) diminuído. No controle e nas doses de 4 e 6 kGy, a cocção não influenciou na digestibilidade da proteína, mas nos tratamentos que receberam doses de radiação de 2, 8 e 10 kGy, houve diferença significativa (p<0,05), sendo que o grão-de-bico cozido apresentou melhor digestibilidade em doses maiores de radiação, embora os tratamentos tenham apresentado digestibilidade baixa. O grão-de-bico cru apresentou melhor diálise de ferro no controle e nas doses 2 e 4 kGy, e o grão-de-bico cozido apresentou melhora conforme o aumento da dose de radiação. Em relação aos aminoácidos essenciais o grão-de-bico apresentou valor nutricional adequado, exceto para metionina.

Ácidos graxos e composição centesimal da carne de coelhos alimentados com ração contendo farelo de coco

Foi estudado o efeito da inclusão de farelo de coco (FC) na ração de coelhos sobre o perfil de ácidos graxos, a relação de ácidos graxos poli-insaturados para saturados (P/S) e a composição centesimal da carne. O experimento utilizou 60 coelhos, cinco níveis de inclusão de FC na ração (0,00; 6,25; 12,50; 18,75; e 25,00%) e doze repetições por tratamento. Os ácidos palmitoléico, esteárico e linolênico foram afetados linearmente pelo nível de FC na ração. A carne dos animais alimentados sem a adição de FC na ração apresentou maiores (p < 0,05) valores de ácido palmítico em relação aos demais níveis de inclusão; maiores (p < 0,05) níveis dos ácidos mirístico e esteárico e menor (p < 0,05) nível de ácido palmitoléico quando comparada à carne proveniente da ração com 25,00% de FC e menor (p < 0,05) nível de ácido linolênico em relação às carnes provenientes das rações contendo 18,75 e 25,00% de FC. A relação P/S na carne não foi afetada (p > 0,05) pelos tratamentos. O aumento do nível de FC na ração não afetou (p > 0,05) a composição centesimal, indicando que a inclusão desse subproduto na ração de coelhos é viável até 25,00%.

Reflexos da utilização de farelo de coco sobre o valor nutricional do filé de tilápia-do-nilo (Oreochromis niloticus Linnaeus, 1857)

O uso do farelo de coco pode representar uma fonte alternativa na alimentação de peixe. Por esse motivo avaliaram-se os reflexos de sua utilização sobre o valor nutricional do filé de tilápia-do-nilo. O experimento foi realizado em um delineamento inteiramente ao acaso com 4 tratamentos (T1 - 0%, T2 - 10%, T3 - 20% e T4 - 30% de inclusão de farelo de coco) e cinco repetições. Foram determinados a composição centesimal, o teor de colesterol e os teores de ácidos graxos. Observou-se diferença (p < 0,05) entre T1 e T3, T2 e T3 para os teores de umidade; entre T2 e T3 para os lipídios; T1 apresentou diferença com relação aos demais tratamentos referentes aos carboidratos; e quanto aos teores de cinzas foi observada diferença de T1 e T2 entre T3 e T4. Os teores de colesterol apresentaram um aumento gradual significativo. Com relação aos ácidos graxos, observou-se diferença (p < 0,05) entre os tratamentos referentes aos C10:0; C12:0; C14:0; C18:1; C18:3 (gama); C20:3; e C22:6 numa proporção tal que não determinou diferença na qualidade nutricional do produto.

Cómele el coco a la tele.

Resumen de la autora en catalán

Coco Chanel. El éxito y la perdurabilidad de su marca, en relación con el liderazgo

Este trabajo de investigación consiste en establecer si Coco Chanel puede ser considerada un líder, y de ser así se determinarán las características de su liderazgo. Coco Chanel además de ser una diseñadora exitosa que marcó tendencias entre 1901 y 1971, también fue una administradora que posicionó una marca y un estilo a nivel mundial. Lo anterior es particularmente relevante en una sociedad y en un tiempo en el que la gran mayoría de empresarios eran hombres. Para lograr el objetivo, se describirán diferentes momentos y situaciones de la vida de Chanel, las cuales le dejaron enseñanzas y experiencias que contribuyeron a su desarrollo como persona, a marcar una época con tendencias revolucionarias y a posicionar su marca, la cuales a pesar del tiempo siguen intactas. Para caracterizar a Chanel, se analizarán sus decisiones y la repercusión tanto a nivel personal como empresarial, su entorno, documentos académicos, documentales, biografías, páginas web oficiales y videos que permitirán establecer el tipo de discurso y lenguaje utilizado por ella para la toma de decisiones en su vida y en su marca, las características de su empresa y del contexto que influyó en el éxito de su marca y en qué medida tal éxito se debió a procesos de liderazgo; de igual forma se establecerá si ella utilizó comprensión descriptiva, (lenguaje que sigue a la realidad) o comprensión generativa (la realidad que sigue al lenguaje) (Barbosa, 2009). A lo largo de esta investigación, se podrá reflexionar en torno a las habilidades que resultan esenciales en un líder y si estas podrían utilizarse en el entorno cambiante al que nos enfrentamos hoy en día.

Aproveitamento da fibra do epicarpo do coco babaçu em compósito com matriz epóxi: estudo do efeito do tratamento da fibra

Nowadays the environmental issues are increasingly highlighted since the future of humanity is dependent on the actions taken by man. Major efforts are being expended in pursuit of knowledge and alternatives to promote sustainable development without compromising the environment. In recent years there has been a marked growth in the development of reinforced composite fiber plants, as an alternative for economic and ecological effects, especially in the substitution of synthetic materials such as reinforcement material in composites. In this current study the chemical- physical or (thermophysics )characteristics of the babassu coconut fiber, derived from the epicarp of the fruit (Orbignyda Phalerata), which the main constituents of the fiber: Klason lignin, insoluble, cellulose, holocellulose, hemicellulose and the content of ash and moisture will be determined. A study was conducted about the superficial modification of the fibers of the epicarp babassu coconut under the influence of chemical treatment by alkalinization, in an aqueous solution of NaOH to 2.5% (m/v) and to 5.0% to improve the compatibility matrix / reinforcement composite with epoxy matrix. The results of the changes occurred in staple fibers through the use of the techniques of thermogravimetric analyses (TG) and differential scanning calorimetry (DSC). The results found on thermal analysis on samples of fiber without chemical treatment (alkalinities), and on fiber samples treated by alkalinization show that the proposed chemical treatment increases the thermal stability of the fibers and provides a growth of the surface of area fibers, parameters that enhance adhesion fiber / composite. The findings were evaluated and compared with published results from other vegetable fibers, showing that the use of babassu coconut fibers has technical and economic potential for its use as reinforcement in composites

Síntese e impregnação de peneiras moleculares Fe MCM-41 derivada de sílica da casca do arroz

The mesoporous molecular sieves of the MCM-41 and FeMCM-41 type are considered promissory as support for metals used as catalysts in oil-based materials refine processes and as adsorbents for environmental protection proposes. In this work MCM-41 and FeMCM41 were synthesized using rice husk ash - RHA as alternative to the conventional silica source. Hydrothermal synthesis was the method chosen to prepare the materials. Pre-defined synthesis parameters were 100°C for 168 hours, later the precursor was calcinated at 550°C for 2 hours under nitrogen and air flow. The sieves containing different proportions of iron were produced by two routes: introduction of iron salt direct synthesis; and a modification post synthesis consisting in iron salt 1 % and 5% impregnation in the material followed by thermal decomposition. The molecular sieves were characterized by X ray diffraction XRD, Fourier transform infrared spectroscopy FT-IR, X ray fluorescence spectroscopy XFR, scanning electronic microscopy SEM, specific surface area using the BET method, Termogravimetry TG. The kinetic model of Flynn Wall was used with the aim of determining the apparent activation energy of the surfactant remove (CTMABr) in the MCM- 41 porous. The analysis made possible the morphology characterization, identifying the presence of hexagonal structure typical for mesoporous materials, as well as observation of the MCM41 and iron of characteristic bands.

Obtenção de filtro cerâmico a partir da diatomita e casca de arroz carbonizada visando tratamento de efluente têxtil

The effluents released by the textile industry have high concentrations of alkali, carbohydrates, proteins, in addition to colors containing heavy metals. Therefore, a filter was prepared aiming primarily to the removal of color. In order to prepare this filter, rice hulls and diatomite were used, which have in their structure, basically amorphous hydrated silica. The silica exists in three crystalline forms: quartz, tridymite and cristobalite. In accordance with the above considerations, this study was divided into two stages; the first corresponds to the preparation of the filter and the second to carry out the tests in the effluent/filter in order to verify the efficiency of the color removal. First, the raw material was subjected to a chemical analysis and XRD, and then the diatomite was mixed, via humid, with a planetarium windmill with 20 %, 40 %, 60 % and 80 % of rice husk ash. To the mixture, 5 % carboxymethylcellulose (CMC) was added as a binder at room temperature. The samples were uniaxially compacted into metallic matrix of 0.3 x 0.1 cm² of area at a pressure of 167 MPa by means of hydraulic press and then sintered at temperatures of 1,000 °C, 1,200 °C and 1,400 °C for 1 h and submitted to granulometry test using laser, linear retraction, water absorption, apparent porosity and resistance to bending, DTA, TMA and XRD. To examine the pore structure of the samples scanning electron microscope (SEM) was used. Also tests were carried out in a mercury porosimeter to verify the average size of the pores and real density of the samples. In the second stage, samples of the effluent were collected from a local industry, whose name will be preserved, located in Igapó, in the State of Rio Grande do Norte - RN. The effluent was first pretreated before filtration and then subjected to a treatment of flotation. The effluent was then characterized before and after filtration, with parameters of color, turbidity, suspended solids, pH, chemical and biochemical oxygen demand (COD and BOD). Thus, through the XRD analysis the formation of cristobalite α in all samples was observed. The best average size of pore was found to be 1.75 μm with 61.04 % apparent porosity, thus obtaining an average 97.9 % color removal and 99.8 % removal of suspended solid

Estudo da potencialidade da incorporação de resíduo de granito e da queima da casca do café em cerâmica vermelha

The industrial production of ornamental rocks and the burning of coffee husk generate waste that is discarded into the environment. However, with the study of the incorporation of these residues in ceramic products, may be found an alternative to reducing environmental impacts and detrimental effects on human health caused by its indiscriminate disposal of waste in nature. Thus, this work aimed to study the addition of ashes of the coffee husk and granite residue in matrix of red ceramic. The raw materials were dry milled and sieved to mesh 100. To characterize the raw materials were carried out analyzes of X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis (PSA), differential thermal analysis (DTA) and thermogravimetric analysis (TG). Six formulations were prepared where the clay content was kept constant (70%wt) and ashes contents and granite residue varied from 10, 15, 20 and 30%. Dilatometrics analyzes were performed at four selected formulations, containing them: 100% clay (A100); 70% clay and 30% ashes (A70C30); 70% clay and 30% granite residue (A70G30); and 70% clay, 15% granite residue and 15% ashes (A70G15C15). The samples were prepared by uniaxial compaction with pressure of 25 MPa, and fired at temperatures of 800°C, 850ºC, 900ºC, 950ºC, 1000ºC and 1100°C. Assays were performed to determine the linear shrinkage of burning (LSB), water absorption (WA), apparent porosity (AP), density (D) and tensile bending. Also were performed analyzes of X-ray diffraction (XRD) and scanning electron microscopy (SEM) of the samples fired. The formulations incorporating granite residue and/or ashes reached the required limits of water absorption according to NBR 15270-1 and NBR 15310 and tensile bending according to classical literature (SANTOS, 1989) necessary for the production of tiles and ceramic block for masonry sealing

Adição de subprodutos da cinza da casca de café (coffea canephora) em massa cerâmica para porcelanato

To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles

Estudo sobre as potencialidades de compósitos à base de gesso e fibras de coco seco para aplicação na construção civil

The use of gypsum, one of the oldest building materials for the construction industry in the country has been experiencing a significant and steady growth, due to its low cost and some of its properties that confer comparative advantage over other binder materials. Its use comprises various applications including the coating of walls and the production of internal seals and linings. Moreover, the fibers are being increasingly incorporated into arrays fragile in an attempt to improve the properties of the composite by reducing the number of cracks, the opening of the same and its propagation velocity. Other properties, depending on the function of the component material or construction, among these thermal and acoustic performances, are of great importance in the context of buildings and could be improved, that is, having better performance with this embodiment. Conduct a comparative study of physico-mechanical, thermal and acoustic composite gypsum incorporating dry coconut fiber, in the form of blanket, constituted the main objective of this work. Improving the thermal and acoustic performances of precast gypsum, used for lining and internal vertical fences of buildings, was the purpose of development of these composites. To evaluate the effect of fiber content on the properties of the composites were used to manufacture the composite layer with different thicknesses. The composites were fabricated in the form of plates with dimensions of 500x500x24mm. To facilitate the comparative study of the properties were also made with material gypsum boards only. We then determined the physico-mechanical, thermal and acoustical plaster and composites. The results indicated that the composites were significant gains in relation to thermal performance and also acoustic, in certain frequency range, increasing the thickness of the blanket. Concerning other physical-mechanical properties, the results showed that although the compressive strength was lower than for the composite did not occur after a fracture catastrophic failure. The same trend was observed with regard to resistance to bending, since the composites have not suffered sudden rupture and still continued after the load supporting point of maximum load

Estudo de efeitos de um extrato aquoso de farinha de casca de maracujá (Passiflora edulis f. flavicarpa) na marcação de constituintes sangüíneos com Tecnécio 99m, na morfometria das hemácias e na biodisponibilidade do radiofármaco Pertecnetato de Sódio em ratos Wistar

Blood constituents labelled with technetium-99m (99mTc) has been used with radiobiocomplexes in several procedures in nuclear medicine. Some natural and sintetic drugs are capable to interfere on the labeling of blood constituents with 99mTc, on the morphology of red blood cells (RBC) and on the biodistribution of radiobiocomplexes. The aim of this study was evaluate the effect of an extract of Passiflora edulis f. flavicarpa on the labeling of blood constituints with 99mTc, on the morphology of RBC and on the biodistribution of the radiopharmaceutical sodium perthecnetate in Wistar rats. On the in vitro studies the Passiflora edulis f. flavicarpa decreased significantly (p<0.05) the %ATI on plasma proteins and on the in vitro morhology of RBC, the passion fruit peel flour altered the shape and the perimeter/área ratio. On the in vivo estudies the extract did not altered the %ATI in blood constituents, and did not altered the shape of RBC. Although, on the biodistribution of the radiobiocomplex sodium perthecnetate (Na99mTcO4) this extract decreased significantly (p<0.05) the uptake in duodenum, spleen, pâncreas and blood, and increased the uptake in stomach. It can be suggested that the effects presented by this extract could be a result of some substances contained in this extract that could alter the binding of 99mTc to plasma proteins, the morphology of RBC and the biodistribution of the radiobiocomplex sodium perthecnetate. This study was multidisciplinary experimental research. It was developed with the contribution of different Departments and Services of the Hospital Universitário Pedro Ernesto of the Universidade Estadual do Rio de Janeiro