Engineers and technicians : the effect of cognitive style and gender on visual information processing

The purpose of this project was to identify in a subject group of engineers and technicians (N = 62) a preferred mode of representation for facilitating correct recall of information from complex graphics. The modes of representation were black and white (b&w) block, b&w icon, color block, and color icon. The researcher's test instrument included twelve complex graphics (six b&w and six color - three per mode). Each graphics presentation was followed by two multiple-choice questions. Recall performance was better using b&w block mode graphics and color icon mode graphics. A standardized test, the Group Embedded Figures Test (GEFT) was used to identify a cognitive style preference (field dependence). Although engineers and technicians in the sample were strongly field-independent, they were not significantly more field-independent than the normative group in the Witkin, Oltman, Raskin, and Karp study (1971). Tests were also employed to look for any significant difference in cognitive style preference due to gender. None was found. Implications from the project results for the design of visuals and their use in technical training are discussed.

Rapport au travail et dynamique de transformation du métier d'ingénieur dans le contexte algérien: le cas de l'entreprise Sonatrach

Cette recherche a pour objet l'étude de la dynamique de transformation du métier d'ingénieur dans le contexte algérien saisi à travers le rapport au travail. Elle repose sur une approche théorique s'inspirant d'une sociologie des groupes professionnels avec une démarche alliant méthodes quantitatives et qualitatives. Prenant appui sur des données recueillies à l'aide d'un questionnaire et d'entretiens approfondis menés dans Sonatrach, la plus grande entreprise d'Algérie, notre étude s'est attachée à faire ressortir les facteurs qui agissent au niveau individuel, organisationnel et sociétal sur les pratiques professionnelles pour deux générations d'ingénieurs. La première a eu pour mission de bâtir le pays à travers les grands projets de développement qui ont caractérisé la période après l'indépendance. La deuxième est arrivée sur le marché de l'emploi, à la fin des années 80, dans un contexte de crise et a payé un lourd tribut à la détérioration de la conjoncture économique. Les pratiques professionnelles se construisent tout d'abord dans le travail, mais aussi dans l'exercice des activités quotidiennes, les relations avec les autres et enfin la satisfaction à l'égard du travail. Tels ont été les points focaux de notre démarche d'explicitation du rapport au travail chez nos ingénieurs. Nous avons mis en lumière l'effet de la position hiérarchique au sein de l'organisation et des types de fonction. La satisfaction tient de la fierté d'appartenir à une entreprise prestigieuse. Chez les jeunes, elle s'exprime aussi dans les avantages matériels et une vision du métier fondée sur la maîtrise technique. Les plus âgés, encore marqués par l'idéologie nationaliste, mettent l'accent sur la participation à l'édification du pays, mais aussi sur la réalisation de soi et la fidélité à l'entreprise. Le rapport au travail s'élabore également au fil du temps dans son cheminement professionnel. Nous l'avons abordé, dans une deuxième étape, en documentant les processus d'intégration et de mobilité au sein de l'entreprise. Les trajectoires professionnelles sont régies par des politiques et des procédures de gestion qui en définissent les modalités, mais elles obéissent également à des opportunités et à des pratiques informelles qui jouent un rôle tout aussi important dans la détermination des profils de carrière. Enfin, le rapport au travail est tributaire de facteurs qui dépassent le cadre de l'entreprise. Dans une troisième étape, nous avons analysé les transformations du système éducatif et leur impact sur la certification des ingénieurs, la crise économique et ses effets en termes de chômage et de précarité et enfin la montée du discours religieux et ses manifestations chez les ingénieurs. Ces facteurs liés au contexte sociétal modifient les représentations et modèlent les attitudes et comportements au travail et à l'égard de celui-ci. Comme le montre notre recherche, le rapport au travail articule, dans une composition complexe, parcours individuels et histoires collectives vécus dans des environnements en évolution. La pratique d'un métier se trouve liée aux différents contextes de socialisation qui traversent les individus. Elle se situe, dans le cas algérien, au croisement d'une formation scientifique et technique qui montre peu de réactivité aux besoins mouvants de l'opérateur économique qu'elle est censée satisfaire, d'une entreprise bureaucratique dans son organisation et dans son fonctionnement où le contournement des règles peut s'ériger en principes de gestion et enfin d'un contexte sociétal qui oscille entre modernité et tradition. Cette dernière est réinterprétée de manière orthodoxe par les mouvements religieux en action dans la société. Ainsi, les ingénieurs investis initialement d'une mission de développement et considérés alors comme "vecteur de modernité" connaissent une détérioration de leur statut et la crise touche la profession vécue cependant différemment selon les générations.

Gestor de contenidos del geoportal de la IDE del Calbildo Insular de la Palma

Dos de los problemas más comunes presentes en las Administraciones que gestionan Información Territorial a través de una IDE, son la dificultad de que los técnicos para gestionar y actualizar la información, y la dependencia tecnológica de terceros. Parte del problema de la actualización y gestión de la información lo hemos solucionado con el desarrollo de un Gestor de Contenidos del Geoportal y de los servicios WMS, que se liberará como software libre. El Gestor funciona a través de una navegador web estándar donde el usuario, tras validarse, accede a la configuración y publicación de servicios que le permite entre otras: crear nuevos WMS, gestionar los WMS existentes, gestionar las capas del Geoportal, generar leyendas, gestionar usuarios, etc. De este modo, un usuario no técnico y sin conocimientos avanzados de geomática puede publicar capas como servicios WMS sin dificultad

Inhibition of synaptic transmission and G protein modulation by synthetic CaV2.2 Ca2+ channel peptides

Abstract: Modulation of presynaptic voltage-dependent Ca+ channels is a major means of controlling neurotransmitter release. The CaV 2.2 Ca2+ channel subunit contains several inhibitory interaction sites for Gβγ subunits, including the amino terminal (NT) and I–II loop. The NT and I–II loop have also been proposed to undergo a G protein-gated inhibitory interaction, whilst the NT itself has also been proposed to suppress CaV 2 channel activity. Here, we investigate the effects of an amino terminal (CaV 2.2[45–55]) ‘NT peptide’ and a I–II loop alpha interaction domain (CaV 2.2[377–393]) ‘AID peptide’ on synaptic transmission, Ca2+ channel activity and G protein modulation in superior cervical ganglion neurones (SCGNs). Presynaptic injection of NT or AID peptide into SCGN synapses inhibited synaptic transmission and also attenuated noradrenaline-induced G protein modulation. In isolated SCGNs, NT and AID peptides reduced whole-cell Ca2+ current amplitude, modified voltage dependence of Ca2+ channel activation and attenuated noradrenaline-induced G protein modulation. Co-application of NT and AID peptide negated inhibitory actions. Together, these data favour direct peptide interaction with presynaptic Ca2+ channels, with effects on current amplitude and gating representing likely mechanisms responsible for inhibition of synaptic transmission. Mutations to residues reported as determinants of Ca2+ channel function within the NT peptide negated inhibitory effects on synaptic transmission, Ca2+ current amplitude and gating and G protein modulation. A mutation within the proposed QXXER motif for G protein modulation did not abolish inhibitory effects of the AID peptide. This study suggests that the CaV 2.2 amino terminal and I–II loop contribute molecular determinants for Ca2+ channel function; the data favour a direct interaction of peptides with Ca2+ channels to inhibit synaptic transmission and attenuate G protein modulation. Non-technical summary: Nerve cells (neurones) in the body communicate with each other by releasing chemicals (neurotransmitters) which act on proteins called receptors. An important group of receptors (called G protein coupled receptors, GPCRs) regulate the release of neurotransmitters by an action on the ion channels that let calcium into the cell. Here, we show for the first time that small peptides based on specific regions of calcium ion channels involved in GPCR signalling can themselves inhibit nerve cell communication. We show that these peptides act directly on calcium channels to make them more difficult to open and thus reduce calcium influx into native neurones. These peptides also reduce GPCR-mediated signalling. This work is important in increasing our knowledge about modulation of the calcium ion channel protein; such knowledge may help in the development of drugs to prevent signalling in pathways such as those involved in pain perception.

Population based models of cortical drug response: insights from anaesthesia

A great explanatory gap lies between the molecular pharmacology of psychoactive agents and the neurophysiological changes they induce, as recorded by neuroimaging modalities. Causally relating the cellular actions of psychoactive compounds to their influence on population activity is experimentally challenging. Recent developments in the dynamical modelling of neural tissue have attempted to span this explanatory gap between microscopic targets and their macroscopic neurophysiological effects via a range of biologically plausible dynamical models of cortical tissue. Such theoretical models allow exploration of neural dynamics, in particular their modification by drug action. The ability to theoretically bridge scales is due to a biologically plausible averaging of cortical tissue properties. In the resulting macroscopic neural field, individual neurons need not be explicitly represented (as in neural networks). The following paper aims to provide a non-technical introduction to the mean field population modelling of drug action and its recent successes in modelling anaesthesia.

Economic forecasting in a changing world

This article explains the basis for a theory of economic forecasting developed over the past decade by the authors. The research has resulted in numerous articles in academic journals, two monographs, Forecasting Economic Time Series, 1998, Cambridge University Press, and Forecasting Nonstationary Economic Time Series, 1999, MIT Press, and three edited volumes, Understanding Economic Forecasts, 2001, MIT Press, A Companion to Economic Forecasting, 2002, Blackwells, and the Oxford Bulletin of Economics and Statistics, 2005. The aim here is to provide an accessible, non-technical, account of the main ideas. The interested reader is referred to the monographs for derivations, simulation evidence, and further empirical illustrations, which in turn reference the original articles and related material, and provide bibliographic perspective.

Sutton Common (South Yorkshire): a monument at risk in England’s wetlands

The work on the Iron Age site at Sutton Common, South Yorkshire, UK, has provided both inspiration and a testing ground for the development of English Heritage's strategy for wetlands. This paper concentrates on the non-technical aspects of the developing conservation management of the site, which includes in situ preservation of selected waterlogged remains, and summarises the main results of the Monuments at Risk in England's Wetlands project, the new strategy for which it formed the basis

Transit times – the link between hydrology and water quality at the catchment scale

In spite of trying to understand processes in the same spatial domain, the catchment hydrology and water quality scientific communities are relatively disconnected and so are their respective models. This is emphasized by an inadequate representation of transport processes, in both catchment-scale hydrological and water quality models. While many hydrological models at the catchment scale only account for pressure propagation and not for mass transfer, catchment scale water quality models are typically limited by overly simplistic representations of flow processes. With the objective of raising awareness for this issue and outlining potential ways forward we provide a non-technical overview of (1) the importance of hydrology-controlled transport through catchment systems as the link between hydrology and water quality; (2) the limitations of current generation catchment-scale hydrological and water quality models; (3) the concept of transit times as tools to quantify transport and (4) the benefits of transit time based formulations of solute transport for catchment-scale hydrological and water quality models. There is emerging evidence that an explicit formulation of transport processes, based on the concept of transit times has the potential to improve the understanding of the integrated system dynamics of catchments and to provide a stronger link between catchment-scale hydrological and water quality models.

Advanced manufacturing technology adoption - the German experience

The decision process that organisations utilise when evaluating technology investment opportunities is a complex and even political process; however, the correct decision can provide the organisation with considerable operational and competitive benefits. The research presented in this paper presents the findings of a postal survey of the benefits provided by technology investments to large German manufacturers. It was found that only where middle management generated the idea for the advanced manufacturing technology (AMT) investment was success in that investment significantly more likely. Respondents who established a project team to plan the technology proposal, regardless of the department which generated the ideas for technology investment, were not significantly associated with a greater likelihood for success.

The respondents typically took between 3 and 12 months before making the final decision to invest, irrespective of the department generating the idea for the AMT, and a further 6 months to implement the AMT. Respondents who utilised a discounted cashflow analysis took significantly longer to make the final decision to invest. The greatest number of manufacturing outcomes of significantly higher importance was identified for respondents where Engineering, IT or R&D generated the AMT ideas. It was also determined that the respondents most frequently considered AMT investments in computer hardware or software and technical training for process workers to be necessary at the time of considering the investment. Middle management were found to be significantly more concerned than managers on other levels about opposition of workers to the AMT, while the process workers were significantly more concerned about interruptions to the process during installation.

International examples of large-scale systems-theory and practice IV: B2B e-commerce implementation in the Australian context

Two of the most commonly used classifications in IS research are the factor approach and the process approach. While many studies of IS implementation are undertaken using a factor approach, little research so far examines the process of e-commerce implementation, especially in relation to the implementation of e-commerce in business-to-business (B2B) relationships. A holistic understanding of implementation which combines both the factor and process approaches using a case study method, is suggested as particularly suitable because of its ability to capture the reality of e-commerce implementation in an organisation's natural environment and in much greater detail than is possible using one of these approaches alone. In this paper, therefore, we endeavour to contribute to what we perceive as a gap in the body of theory surrounding the implementation process in the business-to-business e-commerce literature. We describe the findings of multiple case studies involving ten major Australian e-commerce initiators. In addition to confirming our earlier finding of the importance of non-technical factors for the success of the implementation process we also present, through our case studies, the various management and business issues associated with the success or failure of B2B e-commerce implementation.

Towards the development of a project decision support framework for adoption of an integrated building information model using a model server

This chapter discusses an action research study towards the development of a decision framework to support a fully integrated multi disciplinary Building Information Model (BIM) using a Model Server. The framework was proposed to facilitate multi disciplinary collaborative BIM adoption through, informed selection of a project specific BIM approach and tools contingent upon project collaborators’ readiness, tool capabilities and workflow dependencies. The aim of the research was to explore the technical concerns in relation to Model Servers to support multi disciplinary model integration and collaboration; however it became clear that there were both technical and non technical issues that needed consideration. The evidence also suggests that there are varying levels of adoption which impacts upon further diffusion of the technologies. Therefore the need for a decision framework was identified based on the findings from an exploratory study conducted to investigate industry expectations. The study revealed that even the market leaders who are early technology adopters in the Australian industry in many cases have varying degrees of practical experiential knowledge of BIM and hence at times low levels of confidence of the future diffusion of BIM technology throughout the industry. The study did not focus on the benefits of BIM implementation as this was not the intention, as the industry partners involved are market leaders and early adopters of the technology and did not need convincing of the benefits. Coupled with this there are various other past studies that have contributed to the ‘benefits’ debate. There were numerous factors affecting BIM adoption which were grouped in to two main areas; technical tool functional requirements and needs, and non technical strategic issues. The need for guidance on where to start, what tools were available and how to work through the legal, procurement and cultural challenges was evidenced in the exploratory study. Therefore a BIM decision framework was initiated, based upon these industry concerns. Eight case studies informed the development of the framework and a summary of the key findings is presented. Primary and secondary case studies from firms that have adopted a structured approach to technology adoption are presented. The Framework consists of four interrelated key elements including a strategic purpose and scoping matrix, work process mapping, technical requirements for BIM tools and Model Servers, and framework implementation guide. The BIM framework was presented in draft format again to key industry stakeholders and considered in comparison with current best practice BIM adoption to further validate the framework. There was no request to change any part of the Framework. However, it is an ongoing process and it will be presented again to industry through the various project partners. The Framework may be refined within the boundaries of the action research process as an ongoing activity as more experiential knowledge can be incorporated.

Interactive exploration of data with visual metaphors

Visual Analytics (VA) is an approach to data analysis by means of visual manipulation of data representation, which relies on innate human abilities of perception and cognition. Even though current visual toolkits in the Business Analytics (BA) domain have improved the effectiveness of data exploration, analysis and reporting, their features are often not intuitive, and can be confusing and difficult to use. Moreover, visualizations generated from these toolkits are mostly accessible to specialist users. Thus, there is a need for analytic environments that support data exploration, interpretation and communication of insight that do not add to the cognitive load of the analyst and their non-technical clients. In this conceptual paper, we explore the potential of primary metaphors, which arise out of human lived and sensory-motor experiences, in the design of immersive visual analytics environments. Primary metaphors provide ideas for representation of time, space, quantity, similarity, actions and team work. Using examples developed in our own work, we also explain how to combine such metaphors to create complex and cognitively acceptable visual metaphors, such as 3D data terrains that approximate our intuition of reality and create opportunities for data to be viewed, navigated, explored, touched, changed, discussed, reported and described to others, individually or collaboratively.

A qualidade no serviço de advocacia empresarial: um estudo de caso

° objetivo deste estudo exploratório foi o de investigar a percepção da qualidade no serviço de advocacia empresarial. Para tanto foi realizado um estudo de caso, envolvendo uma organização de grande porte e uma sociedade de advogados que lhe presta serviços de assessoria jurídica, ambos com sede no estado do Rio de Janeiro. Os dados foram obtidos a partir de entrevistas em profundidade com profissionais de ambos os lados, tendo em vista o forte caráter de interação inerente ao serviço estudado e, também, buscando-se identificar eventuais discrepâncias relativas aos critérios de julgamento quanto à sua qualidade. Os resultados indicam que o processo de avaliação da qualidade de serviços tende a apresentar traços distintos na sociedade brasileira devido às peculiaridades de seu sistema cultural. Especificamente quanto ao serviço de advocacia empresarial, restou claro que as expectativas do cliente desempenham um papel relevante para a percepção de sua qualidade, e que fatores não técnicos, ou de natureza funcional, também possuem grande influência no processo.

Até que ponto as IEBTs estão cumprindo seu dever de casa? um estudo de caso da incubadora de empresas da PUC - RJ

This study aims at understanding the entrepreneurial process and the capacity of the incubators of promoting the technical training of the entrepreneurs as well as developing projects, turning them into prosperous companies. The bibliography about this topic is recent and it is based on actual cases and experiences. The development of the sector is quite big and has been happening with a certain speed, creating a demand for studies and scientific production. Due to the fact that it is an exploratory research, the chosen method was the case study, from which we aim at obtaining current information, representative of the reality. The universe of this research will be the incubators of companies that have a technological basis, the sample of which being the companies that are in the ¿Gênesis Institute¿, the incubator of companies of PUC-RIO. From the results, it will be possible to see entrepreneurial processes, training of businessmen, technological development and generation of prosperous companies. The theoretical reference presents the concepts of entrepreneurialship and IEBTs.