Aplicação de métodos geofísicos no monitoramento de área contaminada sob atenuação natural

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Erbium and ytterbium co-doped SiO2 : GeO2 planar waveguide prepared by the sol-gel route using an alternative precursor

The sol-gel method combined with a spin-coating technique has been successfully applied for the preparation of rare-earth doped silica:germania films used for the fabrication of erbium-doped waveguide amplifiers (EDWA), presenting several advantages over other methods for the preparation of thin films. As with other methods, the sol-gel route also shows some drawbacks, such as cracks related to the thickness of silica films and high hydrolysis rate of certain precursors such as germanium alkoxides. This article describes the preparation and optical characterization of erbium and ytterbium co-doped SiO2:GeO2 crack-free thick films prepared by the sol-gel route combined with a spin-coating technique using a chemically stable non-aqueous germanium oxide solution as an alternative precursor. The non-crystalline films obtained are planar waveguides exhibiting a single mode at 1,550 nm with an average thickness of 3.9 mu m presenting low percentages of porosity evaluated by the Lorentz-Lorenz Effective Medium Approximation, and low stress, according to the refractive index values measured in both transversal electric and magnetic polarizations. Weakly confining core layers (0.3% < Delta n < 0.75%) were obtained according to the refractive index difference between the core and buffer layers, suggesting that low-loss coupling EDWA may be obtained. The life time of the erbium I-4(13/2) metastable state was measured as a function of erbium concentration in different systems and based on these values it is possible to infer that the hydroxyl group was reduced and the formation of rare-earth clusters was avoided.

Aplicação do método eletromagnético indutivo (EM) no monitoramento de contaminantes em subsuperfície

O uso combinado de poços de amostragem e técnicas geofísicas constitui a maneira mais adequada para identificação e o monitoramento de áreas contaminadas. Este procedimento permite a locação de poços de amostragem e de monitoramento em pontos estratégicos, otimizando resultados e minimizando gastos. O método geofísico Eletromagnético Indutivo (EM) apresenta amplas possibilidades de aplicação em estudos ambientais devido à facilidade na aquisição de dados, versatilidade do equipamento em campo e a possibilidade de varredura de grandes áreas num curto espaço de tempo. Este trabalho realiza uma análise comparativa de dados em obtidos no ano de 1992 e em 2003. O local estudado é uma área industrial que apresenta contaminação do solo e água subterrânea por Benzeno, Tolueno, Xileno, 1,2 dicloroetano, Sódio e Cloreto, produto da infiltração de efluentes químicos diretamente do solo. Os resultados indicam uma acentuada atenuação da pluma contaminante, com provável redução no grau de contaminação. Os compostos de fase leve (LNAPLs) apresentaram maior tendência de migração horizontal, concomitante ao movimento da água subterrânea. Os compostos de fase densa (DNAPLs) apresentaram uma tendência mais acentuada de migração no sentido vertical, possivelmente devido à ausência de superfícies impermeáveis. Os compostos inorgânicos acompanharam o fluxo dos compostos de fase líquida não aquosa (NAPLs), o que por sua vez permitiu a caracterização da pluma de contaminação como um corpo condutivo em relação às áreas adjacentes.

Estudo das propriedades de troca iônica e/ou adsorção da celulose e celuloses modificadas

In this work it was studied the capacity of cellulose and chemically modified celluloses (carboxymethylcellulose, cellulose phosphate and oxicellulose) to adsorb copper(II) cations of aqueous and non aqueous solutions. The influence of the principal physical chemical parameters on the adsorption process was examined using the batch adsorption method and copper(II) perchlorate solutions, the maximum adsorption capacity determined for adsorbents were as follows (mol.g(-1)): cellulose, 0.54 . 10(-5); carboxymethylcellulose, 1.28 . 10(-4); cellulose phosphate, 1.12 . 10(-4); oxicellulose, 0.38 . 10(-4).

Structure of SnO2 alcosols and films prepared by sol-gel dip coating

To obtain SnO2 films to be used for surface protection of fluoride glasses, a non-aqueous sol-gel route for the preparation was developed. An ethanolic SnO2 colloidal suspension was prepared by thermohydrolysis of SnCl4 solution at 70 degreesC. By using this procedure, redispersable powders with nanometer sized particles were obtained. Films were obtained by dip coating on glass and mica substrates. The structures of the ethanolic precursor suspension and films were compared to those of similar samples prepared by the classical aqueous sol-gel route. Comparative analyses performed by photon correlation spectroscopy demonstrated that the powders obtained by freeze-drying are fully redispersable either in aqueous or in alcoholic solutions at pH greater than or equal to 8. As prepared sols and redispersed colloidal suspensions have hydrodynamic radius distribution (2-14 nm) with an average size close to 7 nm. The variations in film structures with firing temperature were investigated by small-angle X-ray scattering and X-ray reflectometry. The experimental results show that the films have a two level porous structure composed of agglomerates of primary colloidal particles. The sintering of the primary particles leads to the densification of agglomerates and to the formation of inter-agglomerate spatially correlated pores. The volume fraction of intra-agglomerate pores is reduced from approximate to 50% to approximate to 30% by the precipitation of precursor salts partially hydrolyzed in ethanolic solution. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Investigation on the structure of liquid N-methylformamide-dimethylsulfoxide mixtures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structure of cobalt (II) perchlorate adsorbed on silica gel surface chemically modified with benzimidazole molecule

Covalently attached benzimidazole molecules on silica gel surface, ≡SiL (where L = N-propyl-benzimidazole), adsorbs Co(ClO4)2 from non-aqueous solvent by forming a surface complex according to the reaction: m ≡SiL + Co(ClO4)2 → (≡SiL)mCo(ClO4)2. The equilibrium constant and the adsorption capacity, determined by applying the Langmuir equation were b = 3.0 × 103 L mol-1 and Ns= 0.098 × 10-3 mol g-1, respectively. The metal is bonded through the nitrogen atom and the perchlorate ion is not coordinated. The ESR study indicated that the complex has essentially an octahedral geometry with tetragonal distortion, with the electrons of the four nitrogen atoms interacting with the cobalt central metal ion in the equatorial plane. Only one complex species was detected on the surface.

Adsorção de íons Cu(II) sobre superfícies de sílicas gel modificadas com 4-amino-2-mercaptopirimidina e com 2-mercaptopirimidina

Pós-graduação em Ciência dos Materiais - FEIS

Aplicação do método eletromagnético transiente em área contaminada sob atenuação natural

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção de lipase por Fusarium oxysporum em fermentação em estado sólido e sua aplicação em reações de síntese de ésteres de biodiesel

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Syzygium cumini (L.) Skeels: avaliação da qualidade, estudo morfo-anatômico, estudo da atividade antimicrobiana, conservante, genotóxica, mutagênica, citotóxica e incorporação em formulações cosméticas para uso tópico

Pós-graduação em Ciências Farmacêuticas - FCFAR

Análise químico-farmacêutica e estudo de estabilidade de cefuroxima sódica injetável

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Eletrodos nanoestruturados de 'TI' 'O IND.2' aplicados na degradação fotoeletrocatalítica de aminas aromáticas e desenvolvimento de dispositivo fotovoltaico 'TI 'O IND.2' / 'SB IND.2' 'S IND.3' / 'P3' 'HT'

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

On the hydrogen bonding between N-methylformamide and acetone and tetrahydrofuran

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Radônio como indicador de contaminação de solos por hidrocarbonetos

Previous studies show that in areas contaminated by fuel spill (NAPL- non-aqueous phase liquids), from operational activities, transport and storage, it was possible to observe a significant decrease of ²²²Rn (radon) gas concentration in the soil, even a non-uniform distribution of this gas in top soil, even with a geological situation was practically homogeneous. These anomalies may be associated with the preference partitioning of radon in NAPLs. This work consists of applying ²²²Rn as an indicator for locating subsurface contamination by NAPLs in an area of the city of Rio Claro (SP) where, according to the “Survey of Contaminated and Rehabilitated Areas in the State of São Paulo (Environmental Sanitation and Technology Company - CETESB), there was, in the year 2007, groundwater contamination from leaks of liquid fuels. The challenges of this research are: Promulgate the use of a new tool with greater efficiency in obtaining results, in addition to generate less impact in half and have less expenditure; disseminate scientific culture promoting greater integration of C&T (culture & technology) between universities and businesses. The emanometric technique to estimate the location, number and interfacial area of NAPL in saturated and non-saturated zone, has the advantage of locating and determining plumes of free phase even when the amount of VOC's (Volatile Organic Compounds) that reaches the surface is low or non-existent. In addition, the measurement techniques ²²²Rn are quite developed. The results obtained show that, similar to the other studies, the 222Rn soil gas presents an anomalous behavior in the area bounded by NAPL plume, being possible to note a significant deficit in the concentration of the gas in spots where the saturation by NAPLs is still critical. Therefore it is concluded that this tool is really promising, but we must be careful to evaluate the initial conditions of the area, as well as the type of...