Genetic variability of banana with ornamental potential

The Musa germplasm collection at Embrapa Cassava and Fruits detains accessions from different sections of the Musa genus. The objective of the present study was to identify and morphologically characterize banana accessions from the banana germplasm with ornamental potential, as well as to quantify their genetic variability; and identify possible progenitors to be used in breeding aiming to achieve ornamental crossbreeds. The accessions were evaluated with the use of 32 morphological descriptors. Then, they were the following grouped into categories: landscape plants, cut flower, potted plants, and male inflorescence minifruits. The pre-selected accessions presented great genetic variability and ornamental potential for different uses. The accessions of the Rhodochlamys and Callimusa sections were selected to be used as landscape plants, cut flowers, potted plants, male inflorescence and minifruits. Most of the diploids from the Eumusa section evaluated in this study are indicated for the production of ornamental minifruits, except for 'Lidi' and Cici, which can also be indicated as landscape plants. The BB diploids have great potential for the use of the male inflorescence in floral arrangements, and did not offer any other indication.

Advantages and Applications of Transforming Empirical Model Input Space with Dimensional Models

Model-based calibration of steady-state engine operation is commonly performed with highly parameterized empirical models that are accurate but not very robust, particularly when predicting highly nonlinear responses such as diesel smoke emissions. To address this problem, and to boost the accuracy of more robust non-parametric methods to the same level, GT-Power was used to transform the empirical model input space into multiple input spaces that simplified the input-output relationship and improved the accuracy and robustness of smoke predictions made by three commonly used empirical modeling methods: Multivariate Regression, Neural Networks and the k-Nearest Neighbor method. The availability of multiple input spaces allowed the development of two committee techniques: a 'Simple Committee' technique that used averaged predictions from a set of 10 pre-selected input spaces chosen by the training data and the "Minimum Variance Committee" technique where the input spaces for each prediction were chosen on the basis of disagreement between the three modeling methods. This latter technique equalized the performance of the three modeling methods. The successively increasing improvements resulting from the use of a single best transformed input space (Best Combination Technique), Simple Committee Technique and Minimum Variance Committee Technique were verified with hypothesis testing. The transformed input spaces were also shown to improve outlier detection and to improve k-Nearest Neighbor performance when predicting dynamic emissions with steady-state training data. An unexpected finding was that the benefits of input space transformation were unaffected by changes in the hardware or the calibration of the underlying GT-Power model.

Legislative Legacy: Big Changes in Legislative Article of 1972 Constitution -- Jerry Loendorf, Arlyne Reichert & Rich Bechtel “In the Crucible of Change”

The fulcrum upon which were leveraged many of the dramatic progressive changes in Montana that are documented "In the Crucible of Change" series was the lead up to, preparation, writing and adoption of the 1972 Montana Constitution. As Montana citizens exhibited their concern over the dysfunctional state government in MT under its 1889 Constitution, one of the areas that stood out as needing serious change was the Montana Legislature. Meeting for only sixty calendar days every two years, the Legislature regularly tried to carry off the subterfuge of stopping the wall clock at 11:59 PM on the sixtieth day and placing a shroud over it so they could continue to conduct business as if it were still the 60th day. Lawyers hired by the Anaconda Company drafted most bills that legislators wanted to have introduced. Malapportionment, especially in the State Senate where each county had one Senator regardless of their population, created a situation where Petroleum County with 800 residents had one senator while neighboring Yellowstone County with 80,000 people also had one senator -- a 100-1 differential in representation. Reapportionment imposed by rulings of the US Supreme Court in the mid-1960s created great furor in rural Montana to go along with the previous dissatisfaction of the urban centers. Stories of Anaconda Company “thumbs up – thumbs down” control of the votes were prevalent. Committee meeting and votes were done behind closed doors and recorded votes were non-existent except for the nearly meaningless final tally. People were in the dark about the creation of laws that affected their daily lives. It was clear that change in the Legislature had to take the form of change in the Constitution and, because it was not likely that the Legislature would advance Constitutional amendments on the subject, a convention seemed the only remedy. Once that Convention was called and went to work, it became apparent that the Legislative Article provided both opportunity for change and danger that too dramatic a change might sink the whole new document. The activities of the Legislative Committee and the whole Convention when acting upon Legislative issues provides one of the more compelling stories of change. The story of the Legislative Article of the Montana Constitution is discussed in this episode by three major players who were directly involved in the effort: Jerry Loendorf, Arlyne Reichert and Rich Bechtel. Their recollections of the activities surrounding the entire Constitutional Convention and specifically the Legislative Article provide an insider’s perspective of the development of the entire Constitution and the Legislative portion which was of such a high degree of interest to the people of Montana during the important period of progressive change documented “In the Crucible of Change.” Jerry Loendorf, who served as Chair of the Legislative Committee at the 1972 Montana Constitutional Convention, received a BA from Carroll College in 1961 and a JD from the University of Montana Law School in 1964. Upon graduation he served two years as a law clerk for the Montana Supreme Court after which he was for 34 years a partner in the law firm of Harrison, Loendorf & Posten, Duncan. In addition to being a delegate to the Constitutional Convention, Jerry served on the Board of Labor Appeals from 2000 to 2004. He was designated a Montana Special Assistant Attorney General to represent the state in federal court on the challenge to the results of the ratification election of Montana's Constitution in 1972. Jerry served on the Carroll College Board of Directors in the late 1960s and then again as a member of the Board of Trustees of Carroll College from 2001 to 2009. He has served on the Board of Directors of the Rocky Mountain Development Council since 1970 and was on the board of the Helena YMCA from 1981 to 1987. He also served on the board of the Good Samaritan Ministries from 2009 to 2014. On the business side, Jerry was on the Board of Directors of Valley Bank to Helena from 1980 to 2005. He is a member of the American Bar Association, State Bar of Montana, the First Judicial District Bar Association, and the Montana Trial Lawyers Association. Carroll College awarded Jerry the Warren Nelson Award 1994 and the Insignias Award in 2007. At Carroll College, Jerry has funded the following three scholarship endowments: George C and Helen T Loendorf, Gary Turcott, and Fr. William Greytek. Arlyne Reichert, Great Falls Delegate to the Constitutional Convention and former State Legislator, was born in Buffalo, NY in 1926 and attended University of Buffalo in conjunction with Cadet Nurses Training during WWII. She married a Montanan in Great Falls in 1945 and was widowed in 1968. She is mother of five, grandmother of seven, great-grandmother of four. Arlyne was employed by McLaughlin Research Institute in Great Falls for 23 years, serving as Technical Editor of Transplantation Journal in 1967, retiring as Assistant Director in 1989. In addition to being a state legislator (1979 Session) and a delegate to the 1972 Montana Constitutional Convention, she has filled many public roles, including Cascade County Study Commissioner (1974), MT Comprehensive Health Council, US Civil Rights Commission MT Advisory Committee, MT Capitol Restoration Committee, and Great Falls Public Library Trustee. Arlyne has engaged in many non-profit activities including League of Women Voters (State & Local Board Officer – from where her interest in the MT Constitutional change developed), Great Falls Public Radio Association (President & Founder), American Cancer Society (President Great Falls Chapter), Chair of MT Rhodes Scholarship Committee, and Council Member of the National Civic League. She also served a while as a Television Legislative Reporter. Arlyne has been recipient of numerous awards, the National Distinguished Citizens Award from the National Municipal League, two Women of Achievement Awards from Business & Professional Women, the Salute to Women Award by YWCA, Heritage Preservation Award from Cascade County Historical Society and the State of Montana, and the Heroes Award from Humanities Montana. She remains active, serving as Secretary-Treasurer of Preservation Cascade, Inc., and as Board Member of the McLaughlin Research Institute. Her current passion is applied to the preservation/saving of the historic 10th Street Bridge that crosses the Missouri River in Great Falls. Rich Bechtel of Helena was born in Napa, California in 1945 and grew up as an Air Force brat living in such places as Bitberg, Germany, Tripoli, Libya, and Sevilla, Spain. He graduated from Glasgow High School and the University of Montana. Rich was a graduate assistant for noted Montana History professor Professor K. Ross Toole, but dropped out of graduate school to pursue a real life in Montana politics and government. Rich has had a long, varied and colorful career in the public arena. He currently is the Director of the Office of Taxpayer Assistance & Public Outreach for MT’s Department of Revenue. He previously held two positions with the National Wildlife Federation in Washington, DC (Sr. Legislative Representative [1989-91] and Sr. Legislative Representative for Wildlife Policy [2004-2006]). While in Washington DC, he also was Assistant for Senator Lee Metcalf (D-MT), 1974-1976; Federal-State Coordinator for State of Montana, 1976-1989; Director of the Western Governors’ Association Washington Office, 1991-2000; and Director of Federal Affairs for Governor Kitzhaber of Oregon, 2001- 2003. Earlier in Montana Government, between 1971 and 1974, Rich was Research Analyst for MT Blue Ribbon Commission on Postsecondary Education, Legislative Consultant and Bill Drafter for MT Legislative Council, Research Analyst for the MT Constitutional Convention Commission where he provided original research on legislatures, as well as Researcher/Staff for the MT Constitutional Convention Legislative Committee, from where he drafted the various provisions of the Legislative Article and the majority and minority reports on behalf of the Committee members. Rich has represented Montana’s Governor on a trade and cultural mission to Republic of China and participated in US-German Acid Rain Committee sessions in Germany and with European Economic Community environmental officials in Belgium. He is married to Yvonne Seng (Ph.D.) - T’ai Chi apprentice; author and birder.

How best to preserve and reveal the structural intricacies of cartilaginous tissue.

No single processing technique is capable of optimally preserving each and all of the structural entities of cartilaginous tissue. Hence, the choice of methodology must necessarily be governed by the nature of the component that is targeted for analysis, for example, fibrillar collagens or proteoglycans within the extracellular matrix, or the chondrocytes themselves. This article affords an insight into the pitfalls that are to be encountered when implementing the available techniques and how best to circumvent them. Adult articular cartilage is taken as a representative pars pro toto of the different bodily types. In mammals, this layer of tissue is a component of the synovial joints, wherein it fulfills crucial and diverse biomechanical functions. The biomechanical functions of articular cartilage have their structural and molecular correlates. During the natural course of postnatal development and after the onset of pathological disease processes, such as osteoarthritis, the tissue undergoes structural changes which are intimately reflected in biomechanical modulations. The fine structural intricacies that subserve the changes in tissue function can be accurately assessed only if they are faithfully preserved at the molecular level. For this reason, a careful consideration of the tissue-processing technique is indispensable. Since, as aforementioned, no single methodological tool is capable of optimally preserving all constituents, the approach must be pre-selected with a targeted structure in view. Guidance in this choice is offered.

Comparison of hepatic adaptation in extreme metabolic phenotypes observed in early lactation dairy cows on-farm

The aim was to study the variation in metabolic responses in early-lactating dairy cows (n = 232) on-farm that were pre-selected for a high milk fat content (>45 g/l) and a high fat/protein ratio in milk (>1.5) in their previous lactation. Blood was assayed for concentrations of metabolites and hormones. Liver was measured for mRNA abundance of 25 candidate genes encoding enzymes and receptors involved in gluconeogenesis (6), fatty acid β-oxidation (6), fatty acid and triglyceride synthesis (5), cholesterol synthesis (4), ketogenesis (2) and the urea cycle (2). Two groups of cows were formed based on the plasma concentrations of glucose, non-esterified fatty acids (NEFA) and β-hydroxybutyric acid (BHBA) (GRP+, high metabolic load; glucose <3.0 mm, NEFA >300 μm and BHBA >1.0 mm, n = 30; GRP-, low metabolic load; glucose >3.0 mm, NEFA <300 μm and BHBA <1.0 mm, n = 30). No differences were found between GRP+ and GRP- for the milk yield at 3 weeks post-partum, but milk fat content was higher (p < 0.01) for GRP+ than for GRP-. In week 8 post-partum, milk yield was higher in GRP+ in relation to GRP- (37.5 vs. 32.5 kg/d; p < 0.01). GRP+ in relation to GRP- had higher (p < 0.001) NEFA and BHBA and lower glucose, insulin, IGF-I, T3 , T4 concentrations (p < 0.01). The mRNA abundance of genes related to gluconeogenesis, fatty acid β-oxidation, fatty acid and triglyceride synthesis, cholesterol synthesis and the urea cycle was different in GRP+ compared to GRP- (p < 0.05), although gene transcripts related to ketogenesis were similar between GRP+ and GRP-. In conclusion, high metabolic load post-partum in dairy cows on-farm corresponds to differences in the liver in relation to dairy cows with low metabolic load, even though all cows were pre-selected for a high milk fat content and fat/protein ratio in milk in their previous lactation.

Mejora del comportamiento térmico de los morteros de cal aditivados y su empleo en la rehabilitación de inmuebles = Improvement of thermal behaviour of additived lime mortars and their use in rehabilitation of buildings

La envolvente de la edificación es la responsable de equilibrar el intercambio energético entre el interior y el exterior, por lo tanto cualquier actuación encaminada a la reducción del consumo energético ha de establecer, como uno de sus objetivos prioritarios, la mejora del comportamiento de la misma. Las edificaciones anteriores a 1940 constituyen la mayor parte de las existentes en áreas rurales y centros urbanos. En ellas, la repercusión de la fachada sobre las transmitancias globales pone de manifiesto la necesidad de intervención. Sin embargo, su elevada inercia térmica y los importantes saltos térmicos característicos de gran parte de España plantean la importancia de que aquélla se efectúe por el exterior. A tal respecto, la falta de disponibilidad de espesor suficiente para implantar sistemas tipo SATE deriva en que, frecuentemente, la única solución viable sea la de aislar por el interior perdiendo con ello la capacidad de acumulación térmica del muro y con el asociado riesgo de condensaciones. La amplia tradición en el empleo de revestimientos, especialmente en base de cal, permiten que éstos sean utilizados no sólo como elemento estético o de protección de la obra de fábrica antigua sino también para la mejora del comportamiento térmico del soporte, si se aprovecha el mecanismo de transmisión térmica por radiación. Éste es el objetivo de la presente Tesis Doctoral en la que se estudia la modificación de las propiedades radiantes de los morteros de revestimiento para la mejora de la eficiencia energética de las construcciones históricas, principalmente las constituidas por muros monolíticos, aunque podría ser de aplicación a otro tipo de construcciones compuestas por diversas capas. Como punto de partida, se estudió y revisó la documentación disponible sobre las investigaciones de las tres áreas científico-tecnológicas que convergen en la Tesis Doctoral: rehabilitación, material y comportamiento térmico, a partir de lo cual se comprobó la inexistencia de estudios similares al objeto de la presente Tesis Doctoral. Complementariamente, se analizaron los revestimientos en lo concerniente a los materiales que los constituyen, la composición de las mezclas y características de cada una de las capas así como al enfoque que, desde el punto de vista térmico, se estimaba más adecuado para la obtención de los objetivos propuestos. Basándonos en dichos análisis, se preseleccionaron ochenta materiales que fueron ensayados en términos de reflectancia y emisividad para elegir cuatro con los que se continuó la investigación. Éstos, junto con la cal elegida para la investigación y el árido marmóreo característico de la última capa de revestimiento, fueron caracterizados térmicamente, de forma pormenorizada, así como química y físicamente. Los fundamentos teóricos y los estudios preliminares desarrollados con distintos materiales, en estado fresco y endurecido, fueron empleados en la dosificación de componentes de las mezclas, en dos proporciones distintas, para el estudio del efecto del agregado. Éstas se ensayaron en estado fresco, para comprobar su adecuación de puesta en obra y prever su VI adherencia al soporte, así como en estado endurecido a 28 y 90 días de curado, para conocer las propiedades que permitieran prever su compatibilidad con aquél y estimar el alcance de la reducción de transferencias térmicas lograda. Además, se estudiaron las características generales de las mezclas que sirvieron para establecer correlaciones entre distintas propiedades y entender los resultados mecánicos, físicos (comportamiento frente al agua) y energéticos. Del estudio conjunto de las distintas propiedades analizadas se propusieron dos mezclas, una blanca y otra coloreada, cuyas características permiten garantizar la compatibilidad con la obra de fábrica antigua, desde el punto de vista físico y mecánico, y preservar la autenticidad de los revestimientos, en cuanto a la técnica de aplicación tradicional en sistemas multicapa. El comportamiento térmico de las mismas, sobre una obra de fábrica de 40 cm de espesor, se estimó, en estado estacionario y pseudo-transitorio, demostrándose reducciones del flujo térmico entre 16-48%, en condiciones de verano, y entre el 6-11%, en invierno, en función de la coloración y de la rugosidad de la superficie, en comparación con el empleo de la mezcla tradicional. Por lo que, se constata la viabilidad de los materiales compuestos propuestos y su adecuación al objetivo de la investigación. VII ABSTRACT The envelope is responsible for balancing the energy exchange between the inside and outside in buildings. For this reason, any action aimed at reducing energy consumption must establish, as one of its key priorities, its improvement. In rural areas and urban centers, most of the constructions were built before 1940. In them, the impact of the façade on the global transmittance highlights the need for intervention. However, its high thermal inertia and fluctuation of temperatures in the majority of Spain bring up that it should be placed outside the insulation. In this regard, the lack of availability of enough thickness to implement systems such as ETICS results in that often the only viable solution is to isolate the interior, losing thereby the wall’s heat storage capacity with the associated risk of condensation. The tradition in the use of renders, especially lime-based, allows us to use them not only as an aesthetic element or to protect the ancient masonry, but also for improved thermal performance of the support by taking advantage of the heat transfer mechanism by radiation. This is the aim of this Doctoral Thesis in which the modification of the radiative properties of lime mortars for renders to improve the energy efficiency of historic buildings, mainly composed of monolithic walls, is studied, although it could be applied to other structures composed of several layers. As a starting point, the available literature in the three scientific-technological areas that converge at the Doctoral Thesis: rehabilitation, material and thermal behaviour, was reviewed, and confirmed the absence of researches similar to this Doctoral Thesis. Additionally, the renders were studied with regard to the materials that constitute them, the composition of the mixtures and the characteristics of each layer, as well as to the approach which, from a thermal point of view, was deemed the most suitable for achieving the objectives sets. Based on thre aforementioned analysis, eighty materials tested in terms of reflectance and emissivity were pre-selected, to choose four with which the research was continued. Common marble sand, used in the last layer of the renders, together with the appointed materials and hydrated lime were characterized thermally, in detail, as well as chemically and physically. The theoretical bases and preliminary studies with different materials, in fresh and hardened state, were used in the dosage of the composition of the mixtures. In order to study their effect they were used in two different proportions, that is, ten mixtures in total. These were tested in their fresh state to evaluate their setting-up suitability and foresee their adhesion to the support, as well as in their hardened state, at 28 and 90 days of curing, to establish the properties which enabled us to anticipate their compatibility with the old masonry walls and estimate the scope of the reduction of heat transfers achieved. In addition, the general characteristics of the mixtures used to establish correlations and to understand the mechanical, physical and energy results were studied. Two mixtures, one white and one colored, were proposed as the result of the different properties analysed, whose characteristics allow the guarantee of mechanical and physical compatibility VIII with the old masonry and preserve the authenticity of the renders. The thermal behavior of both, applied on a masonry wall 40 cm thick, was estimated at a steady and pseudo-transient state, with heat flow reductions between 16-48% during summertime and 6-11% during wintertime, depending on the color and surface roughness, compared to the use of the traditional mixture. So, the viability of the proposed composite materials and their fitness to the aim of the research are established.

Effects of N fertilisation, year and prolamin alleles on guten quality in durum wheat (Triticum turgidum L. ssp. turgidum) landraces from Spain

A subset of durum wheat Spanish landraces, previously evaluated for yield at low and high nitrogen (N) levels, was analysed for quality, protein content (P) and sodium dodecyl sulphate sedimentation (SDSS) test. The evaluation was carried out at the two N rates and in two years. The influence of prolamin alleles at the Glu-1, Glu-3, Glu-B2 and Gli-1 loci on quality parameters was also studied. The non significant Variety-by-Year or Variety-by-N interactions suggested that year and N affected all the varieties in a similar manner. Year and N effects were larger than variety effect for P, which increased with N. In contrast, variety genotype exhibited a stronger influence on SDSS test, which was not affected by year and fertilizer. Variety effects on P did not reflect the variety differences for SDSS test. A high positive influence of some prolamin alleles on quality parameters was detected, mainly for SDSS values. No correlation between yield and P was detected in the landraces adapted to low N. Based on the results of yield and quality evaluations, four landraces with high yield and high gluten strength were pre-selected for low N production.

PartsList: a web-based system for dynamically ranking protein folds based on disparate attributes, including whole-genome expression and interaction information

As the number of protein folds is quite limited, a mode of analysis that will be increasingly common in the future, especially with the advent of structural genomics, is to survey and re-survey the finite parts list of folds from an expanding number of perspectives. We have developed a new resource, called PartsList, that lets one dynamically perform these comparative fold surveys. It is available on the web at http://bioinfo.mbb.yale.edu/partslist and http://www.partslist.org. The system is based on the existing fold classifications and functions as a form of companion annotation for them, providing ‘global views’ of many already completed fold surveys. The central idea in the system is that of comparison through ranking; PartsList will rank the approximately 420 folds based on more than 180 attributes. These include: (i) occurrence in a number of completely sequenced genomes (e.g. it will show the most common folds in the worm versus yeast); (ii) occurrence in the structure databank (e.g. most common folds in the PDB); (iii) both absolute and relative gene expression information (e.g. most changing folds in expression over the cell cycle); (iv) protein–protein interactions, based on experimental data in yeast and comprehensive PDB surveys (e.g. most interacting fold); (v) sensitivity to inserted transposons; (vi) the number of functions associated with the fold (e.g. most multi-functional folds); (vii) amino acid composition (e.g. most Cys-rich folds); (viii) protein motions (e.g. most mobile folds); and (ix) the level of similarity based on a comprehensive set of structural alignments (e.g. most structurally variable folds). The integration of whole-genome expression and protein–protein interaction data with structural information is a particularly novel feature of our system. We provide three ways of visualizing the rankings: a profiler emphasizing the progression of high and low ranks across many pre-selected attributes, a dynamic comparer for custom comparisons and a numerical rankings correlator. These allow one to directly compare very different attributes of a fold (e.g. expression level, genome occurrence and maximum motion) in the uniform numerical format of ranks. This uniform framework, in turn, highlights the way that the frequency of many of the attributes falls off with approximate power-law behavior (i.e. according to V–b, for attribute value V and constant exponent b), with a few folds having large values and most having small values.

Objetos de aprendizagem: limitações funcionais no ensino médio e aplicabilidade no ensino de física sob uma perpectiva vigostkiana

Neste trabalho fazemos uma revisão das novas tecnologias da informação e comunicação (TIC), definindo o que são Objetos de Aprendizagem (OA) e como eles têm sido utilizados no ensino de Física. Revisamos ainda o trabalho de Vigotski buscando indicações de sua teoria educacional para investigar a aplicabilidade de atividades didáticas em ensino de Física que lancem mão de OA no ensino médio. Elaboramos um instrumento de pesquisa voltado para professores do ensino médio para avaliar seu efetivo uso nas escolas públicas e privadas brasileiras e as limitações funcionais por eles identificadas ao utilizarem esses recursos computacionais. Com base na literatura, e sob uma ótica vigotskiana, aplicamos algumas atividades com OA pré-selecionados e avaliamos com outro instrumento de pesquisa a opinião dos alunos quanto ao seu uso para o ensino de Física. Nosso trabalho pôde corroborar a boa aceitação por parte dos alunos com relação ao seu uso, já divulgada na literatura e também por parte dos professores, mas mostrou que para além das limitações de uso dos OA, especialmente das simulações computacionais, destacadas na literatura e relacionadas às limitações cognitivas que elas podem trazer quando utilizadas de maneira indiscriminada, existem problemas mais profundos de natureza funcional que têm limitado a disseminação de seu uso efetivo pelo corpo docente.

Episodic star formation in a group of LAEs at z=5.07

We are undertaking a search for high-redshift low-luminosity Lyman Alpha sources in the SHARDS (Survey for High-z Absorption Red and Dead Sources) survey. Among the pre-selected Lyman Alpha sources two candidates were spotted, located 3.19 arcsec apart, and tentatively at the same redshift. Here, we report on the spectroscopic confirmation with Gran Telescopio Canarias of the Lyman Alpha emission from this pair of galaxies at a confirmed spectroscopic redshifts of z=5.07. Furthermore, one of the sources is interacting/merging with another close companion that looks distorted. Based on the analysis of the spectroscopy and additional photometric data, we infer that most of the stellar mass of these objects was assembled in a burst of star formation 100 Myr ago. A more recent burst (2 Myr old) is necessary to account for the measured Lyman Alpha flux. We claim that these two galaxies are good examples of Lyman Alpha sources undergoing episodic star formation. Besides, these sources very likely constitute a group of interacting Lyman Alpha emitters (LAEs).

Measurement of ocular component contributions to residual astigmatism in adult human eyes

The aim of this study was to determine whether an ophthalmophakometric technique could offer a feasible means of investigating ocular component contributions to residual astigmatism in human eyes. Current opinion was gathered on the prevalence, magnitude and source of residual astigmatism. It emerged that a comprehensive evaluation of the astigmatic contributions of the eye's internal ocular surfaces and their respective axial separations (effectivity) had not been carried out to date. An ophthalmophakometric technique was developed to measure astigmatism arising from the internal ocular components. Procedures included the measurement of refractive error (infra-red autorefractometry), anterior corneal surface power (computerised video keratography), axial distances (A-scan ultrasonography) and the powers of the posterior corneal surface in addition to both surfaces of the crystalline lens (multi-meridional still flash ophthalmophakometry). Computing schemes were developed to yield the required biometric data. These included (1) calculation of crystalline lens surface powers in the absence of Purkinje images arising from its anterior surface, (2) application of meridional analysis to derive spherocylindrical surface powers from notional powers calculated along four pre-selected meridians, (3) application of astigmatic decomposition and vergence analysis to calculate contributions to residual astigmatism of ocular components with obliquely related cylinder axes, (4) calculation of the effect of random experimental errors on the calculated ocular component data. A complete set of biometric measurements were taken from both eyes of 66 undergraduate students. Effectivity due to corneal thickness made the smallest cylinder power contribution (up to 0.25DC) to residual astigmatism followed by contributions of the anterior chamber depth (up to 0.50DC) and crystalline lens thickness (up to 1.00DC). In each case astigmatic contributions were predominantly direct. More astigmatism arose from the posterior corneal surface (up to 1.00DC) and both crystalline lens surfaces (up to 2.50DC). The astigmatic contributions of the posterior corneal and lens surfaces were found to be predominantly inverse whilst direct astigmatism arose from the anterior lens surface. Very similar results were found for right versus left eyes and males versus females. Repeatability was assessed on 20 individuals. The ophthalmophakometric method was found to be prone to considerable accumulated experimental errors. However, these errors are random in nature so that group averaged data were found to be reasonably repeatable. A further confirmatory study was carried out on 10 individuals which demonstrated that biometric measurements made with and without cycloplegia did not differ significantly.

Combining temporal and spectral information with spatial mapping to identify differences between phonological and semantic networks:a magnetoencephalographic approach

Early, lesion-based models of language processing suggested that semantic and phonological processes are associated with distinct temporal and parietal regions respectively, with frontal areas more indirectly involved. Contemporary spatial brain mapping techniques have not supported such clear-cut segregation, with strong evidence of activation in left temporal areas by both processes and disputed evidence of involvement of frontal areas in both processes. We suggest that combining spatial information with temporal and spectral data may allow a closer scrutiny of the differential involvement of closely overlapping cortical areas in language processing. Using beamforming techniques to analyze magnetoencephalography data, we localized the neuronal substrates underlying primed responses to nouns requiring either phonological or semantic processing, and examined the associated measures of time and frequency in those areas where activation was common to both tasks. Power changes in the beta (14-30 Hz) and gamma (30-50 Hz) frequency bandswere analyzed in pre-selected time windows of 350-550 and 500-700ms In left temporal regions, both tasks elicited power changes in the same time window (350-550 ms), but with different spectral characteristics, low beta (14-20 Hz) for the phonological task and high beta (20-30 Hz) for the semantic task. In frontal areas (BA10), both tasks elicited power changes in the gamma band (30-50 Hz), but in different time windows, 500-700ms for the phonological task and 350-550ms for the semantic task. In the left inferior parietal area (BA40), both tasks elicited changes in the 20-30 Hz beta frequency band but in different time windows, 350-550ms for the phonological task and 500-700ms for the semantic task. Our findings suggest that, where spatial measures may indicate overlapping areas of involvement, additional beamforming techniques can demonstrate differential activation in time and frequency domains. © 2012 McNab, Hillebrand, Swithenby and Rippon.

Two-dimensional viscoelastic discrete triangular system with negative-stiffness components

Potential applications of high-damping and high-stiffness composites have motivated extensive research on the effects of negative-stiffness inclusions on the overall properties of composites. Recent theoretical advances have been based on the Hashin-Shtrikman composite models, one-dimensional discrete viscoelastic systems and a two-dimensional nested triangular viscoelastic network. In this paper, we further analyze the two-dimensional triangular structure containing pre-selected negative-stiffness components to study its underlying deformation mechanisms and stability. Major new findings are structure-deformation evolution with respect to the magnitude of negative stiffness under shear loading and the phenomena related to dissipation-induced destabilization and inertia-induced stabilization, according to Lyapunov stability analysis. The evolution shows strong correlations between stiffness anomalies and deformation modes. Our stability results reveal that stable damping peaks, i.e. stably extreme effective damping properties, are achievable under hydrostatic loading when the inertia is greater than a critical value. Moreover, destabilization induced by elemental damping is observed with the critical inertia. Regardless of elemental damping, when the inertia is less than the critical value, a weaker system instability is identified.

Using Community Outreach to Build Children’s Resiliency and Critical Literacy through Digital Tools

Grade three students used tablet computers with a pre-selected series of applications over a seven-month period at school and through a community afterschool program. The study determined that these students benefited from differentiated learning in the school environment and online collaborative play in the afterschool centre. Benefits of the exposure to digital tools included: intergenerational learning as children assisted both parents and teachers with digital applications; problem-solving; and enhanced collaborative play for students across environments. Although this study makes a contribution to the field of digital literacy and young learners, the researchers conclude further investigation is warranted, in regards to the inter-relationships between home, school and community as spaces for the learning and teaching of digital technologies.

Borrowed alleles and convergence in serpentine adaptation

ACKNOWLEDGMENTS. We thank members of the L.Y. and K.B. laboratories for helpful discussions. This work was supported through the European Research Council Grant StG CA629F04E (to L.Y.); a Harvard University Milton Fund Award (to K.B.); Ruth L. Kirschstein National Research Service Award 1 F32 GM096699 from the NIH (to L.Y.); National Science Foundation Grant IOS-1146465 (to K.B.); NIH National Institute of General Medical Sciences Grant 2R01GM078536 (to D.E.S.); and Biotechnology and Biological Sciences Research Council Grant BB/L000113/1 (to D.E.S.)