Continuity of care and readmission in two service systems: a comparative Victorian and Groningen case-register study

Objective: We compared service consumption, continuity of care and risk of readmission in a record linkage follow-up study of cohorts of patients with schizophrenia and related disorders in Victoria (Australia) and in Groningen (The Netherlands). These areas are interesting to compare because mental health care is in a different stage of deiustitutionalization. More beds are available in Groningen and more community resources are available in Victoria. Method: The cohorts were followed for 4 years, since discharge from inpatient services using record linkage data available in the psychiatric case-registers in both areas. Survival analysis was used to study continuity of care and risk of readmission. Results: Available indicators showed a higher level of continuity of care in Victoria. While the relative risk of readmission was the same in both areas and not affected by aftercare contact after discharge, the number of days spent in hospital was much higher in the Groningen register area. Conclusion: These findings provide further support for earlier reports that the risk of readmission is predominantly affected by attributes of mental illness. However, the duration of admissions, is strongly affected by service system variables, including the provision of continuity of care.

Continuity and change in the gender segregation of the medical profession in Britain and France

It is a well established fact that the entry of women into higher-level professional occupations has not resulted in their equal distribution within these occupations. Indeed, the emergence and persistence of horizontal and vertical gender segregation within the professions has been at the heart of the development of a range of alternative theoretical perspectives on both the "feminisation process" and the future of the "professions"more generally. Through an in-depth comparative analysis of the recent changes in the organisation and administration of the medical profession in Britain and France, this paper draws upon statistical data and biographical interviews with male and female general practitioners (GPs) in both countries in order to discuss and review a variety of approaches that have been adopted to explain and analyse the "eminisation" process of higher-level professions. Our conclusions review the theoretical debates in the light of the evidence we have presented. It is argued that, despite important elements of continuity in respect of gendered occupational structuring in both countries, national variations in both professional and domestic gendered architectures lead to different outcomes as far as the extent and patterns of internal occupational segregation are concerned. Both female and male doctors are currently seeking - with some effect - to resist thepressures of medicine on family life.

Young's modulus varies with differential orientation of keratin in feathers

Feathers are composed of a structure that, whilst being very light, is able to withstand the large aerodynamic forces exerted upon them during flight. To explore the contribution of molecular orientation to feather keratin mechanical properties, we have examined the nanoscopic organisation of the keratin molecules by X-ray diffraction techniques and have confirmed a link between this and the Young's modulus of the feather rachis. Our results indicate that along the rachis length, from calamus to tip, the keratin molecules become more aligned than at the calamus before returning to a state of higher mis-orientation towards the tip of the rachis. We have also confirmed the general trend of increasing Young's modulus with distance along the rachis. Furthermore, we report a distinct difference in the patterns of orientation of beta-keratin in the feathers of flying and flightless birds. The trend for increased modulus along the feathers of volant birds is absent in the flightless ostrich.

Continuity of care for people with psychotic illness: its relationship to clinical and social functioning.

Background: The relationship between continuity of care and user characteristics or outcomes has rarely been explored. The ECHO study operationalized and tested a multi-axial definition of continuity of care, producing a seven-factor model used here. Aims: To assess the relationship between user characteristics and established components of continuity of care, and the impact of continuity on clinical and social functioning. Methods: The sample comprised 180 community mental health team users with psychotic disorders who were interviewed at three annual time-points, to assess their experiences of continuity of care and clinical and social functioning. Scores on seven continuity factors were tested for association with user-level variables. Results: Improvement in quality of life was associated with better Experience & Relationship continuity scores (better user-rated continuity and therapeutic relationship) and with lower Meeting Needs continuity factor scores. Higher Meeting Needs scores were associated with a decrease in symptoms. Conclusion: Continuity is a dynamic process, influenced significantly by care structures and organizational change.

Continuity of care for carers of people with severe mental illness: results of a longitudinal study

Introduction: Continuity of care has been demonstrated to be important for service users and carer groups have voiced major concerns over disruptions of care. We aimed to assess the experienced continuity of care in carers of patients with both psychotic and non-psychotic disorders and explore its association with carer characteristics and psychological well-being. Methods: Friends and relatives caring for two groups of service users in the care of community mental health teams (CMHTs), 69 with psychotic and 38 with non-psychotic disorders, were assessed annually at three and two time points, respectively. CONTINUES, a measure specifically designed to assess continuity of care for carers themselves, was utilized along with assessments of psychological well-being and caregiving. Results: One hundred and seven carers participated. They reported moderately low continuity of care. Only 22 had had a carer’s assessment and just under a third recorded psychological distress on the GHQ. For those caring for people with psychotic disorders, reported continuity was higher if the carer was male, employed, lived with the user and had had a carer’s assessment; for those caring for people with non-psychotic disorders, it was higher if the carer was from the service user’s immediate family, lived with them and had had a carer’s assessment. Conclusion: The vast majority of the carers had not had a carer’s assessment provided by the CMHT despite this being a clear national priority and being an intervention with obvious potential to increase carers’ reported low levels of continuity of care. Improving continuity of contact with carers may have an important part to play in the overall improvement of care in this patient group and deserves greater attention.

Production of a low young modulus titanium alloy by powder metallurgy

Titanium alloys have several advantages over ferrous and non-ferrous metallic materials, such as high strengthto-weight ratio and excellent corrosion resistance. A blended elemental titanium powder metallurgy process has been developed to offer low cost commercial products. The process employs hydride-dehydride (HDH) powders as raw material. In this work, results of the Ti-35Nb alloy sintering are presented. This alloy due to its lower modulus of elasticity and high biocompatibility is a promising candidate for aerospace and medical use. Samples were produced by mixing of initial metallic powders followed by uniaxial and cold isostatic pressing with subsequent densification by isochronal sintering between 900 up to 1600 °C, in vacuum. Sintering behavior was studied by means of microscopy and density. Sintered samples were characterized for phase composition, microstructure and microhardness by X-ray diffraction, scanning electron microscopy and Vickers indentation, respectively. Samples sintered at high temperatures display a fine plate-like alpha structure and intergranular beta. A few remaining pores are still found and density above 90% for specimens sintered in temperatures over 1500 °C is reached.

Effects of inducer continuity on auditory stream segregation:comparison of physical and perceived continuity in different contexts

The factors influencing the stream segregation of discrete tones and the perceived continuity of discrete tones as continuing through an interrupting masker are well understood as separate phenomena. Two experiments tested whether perceived continuity can influence the build-up of stream segregation by manipulating the perception of continuity during an induction sequence and measuring streaming in a subsequent test sequence comprising three triplets of low and high frequency tones (LHL-…). For experiment 1, a 1.2-s standard induction sequence comprising six 100-ms L-tones strongly promoted segregation, whereas a single extended L-inducer (1.1 s plus 100-ms silence) did not. Segregation was similar to that following the single extended inducer when perceived continuity was evoked by inserting noise bursts between the individual tones. Reported segregation increased when the noise level was reduced such that perceived continuity no longer occurred. Experiment 2 presented a 1.3-s continuous inducer created by bridging the 100-ms silence between an extended L-inducer and the first test-sequence tone. This configuration strongly promoted segregation. Segregation was also increased by filling the silence after the extended inducer with noise, such that it was perceived like a bridging inducer. Like physical continuity, perceived continuity can promote or reduce test-sequence streaming, depending on stimulus context.

The Birmingham relationship continuity measure:the development and evaluation of a measure of the perceived continuity of spousal relationships in dementia

Background: Qualitative research has suggested that spousal carers of someone with dementia differ in terms of whether they perceive their relationship with that person as continuous with the premorbid relationship or as radically different, and that a perception of continuity may be associated with more person-centered care and the experience of fewer of the negative emotions associated with caring. The aim of the study was to develop and evaluate a quantitative measure of the extent to which spousal carers perceive the relationship to be continuous. Methods: An initial pool of 42 questionnaire items was generated on the basis of the qualitative research about relationship continuity. These were completed by 51 spousal carers and item analysis was used to reduce the pool to 23 items. The retained items, comprising five subscales, were then administered to a second sample of 84 spousal carers, and the questionnaire's reliability, discriminative power, and validity were evaluated. Results: The questionnaire showed good reliability: Cronbach's α for the full scale was 0.947, and test-retest reliability was 0.932. Ferguson's δ was 0.987, indicating good discriminative power. Evidence of construct validity was provided by predicted patterns of subscale correlations with the Closeness and Conflict Scale and the Marwit-Meuser Caregiver Grief Inventory. Conclusion: Initial psychometric evaluation of the measure was encouraging. The measure provides a quantitative means of investigating ideas from qualitative research about the role of relationship continuity in influencing how spousal carers provide care and how they react emotionally to their caring role. © 2012 International Psychogeriatric Association.

Patterns of acculturative stress: Continuity, discontinuity, and adjustment among Latino youth

This study evaluated inter- and intra-individual changes in acculturation, acculturative stress, and adaptation experiences, as well as their associations with adjustment outcomes among a group of Latino adolescents in South Florida. Specifically, the current study investigated the incidence, changes, and effects of stressors that arise from acculturation experiences (e.g., related to culture, discrimination, language difficulties) among Latino youth by employing a person-centered approach and a longitudinal research design. Four separate groups of analyses were conducted to investigate (a) within-group differences in levels of reported acculturative stress, (b) patterns of continuity and discontinuity in levels of acculturative stress across time, (c) adjustment outcomes associated with distinct patterns of acculturative stress within each measurement occasion, and (d) predictive relations between longitudinal acculturative stress trajectories in early adolescence and psychosocial adjustment outcomes in young adulthood. ^ Results from the multivariate analyses indicated great within group heterogeneity in acculturative stress among Latino youth during early adolescence, as well as significant continuity and discontinuity in the patterns of shifts among acculturative stress profiles between contiguous measurement occasions. Within each developmental period, membership in acculturative stress clusters was significantly and differentially associated with multiple adjustment outcomes, suggesting that maladaptive outcomes are more likely to occur among Latino adolescents experiencing high levels of psychological distress across multiple acculturative domains. In general, Latino youth acculturation is best understood as multi-dimensional, to be variable across time, and to be fluid and responsive to multiple factors and influences. Implications for preventive strategies are discussed with regard to acculturation and developmental psychology research literatures. ^

Measurements of stress-optic coefficient and Young's modulus in PMMA fibers drawn under different conditions

We have systematically measured the differential stress-optic coefficient, ΔC, and Young's modulus, E, in a number of PMMA fibers drawn with different stress, ranging from 2 up to 27 MPa. Effect of temperature annealing on those parameters was also investigated. ΔC was determined in transverse illumination by measuring the dependence of birefringence on additional axial stress applied to the fiber. Our results show that ΔC in PMMA fibers has a negative sign and ranges from -4.5 to -1.5×10-12 Pa -1 depending on the drawing stress. Increase of the drawing stress results in greater initial fiber birefringence and lower ΔC. The dependence of ΔC and initial birefringence upon drawing stress is nonlinear and gradually saturates for higher drawing stress. Moreover, we find that ΔC is linearly proportional to initial fiber birefringence and that annealing the fiber has no impact on the slope of this dependence. On the other hand, no clear dependence was observed between the fiber drawing stress and the Young's modulus of the fibers as measured using microscopic digital image correlation with the fibers tensioned using an Instron tension tester. © 2010 SPIE.

Continuity of care in older adults with multiple chronic conditions

Thesis (Ph.D.)--University of Washington, 2016-08

Large-Scale Controlled-Condition Experiment to Evaluate Light Weight Deflectometers for Modulus Determination and Compaction Quality Assurance of Unbound Pavement Materials

Compaction control using lightweight deflectometers (LWD) is currently being evaluated in several states and countries and fully implemented for pavement construction quality assurance (QA) by a few. Broader implementation has been hampered by the lack of a widely recognized standard for interpreting the load and deflection data obtained during construction QA testing. More specifically, reliable and practical procedures are required for relating these measurements to the fundamental material property—modulus—used in pavement design. This study presents a unique set of data and analyses for three different LWDs on a large-scale controlled-condition experiment. Three 4.5x4.5 m2 test pits were designed and constructed at target moisture and density conditions simulating acceptable and unacceptable construction quality. LWD testing was performed on the constructed layers along with static plate loading testing, conventional nuclear gauge moisture-density testing, and non-nuclear gravimetric and volumetric water content measurements. Additional material was collected for routine and exploratory tests in the laboratory. These included grain size distributions, soil classification, moisture-density relations, resilient modulus testing at optimum and field conditions, and an advanced experiment of LWD testing on top of the Proctor compaction mold. This unique large-scale controlled-condition experiment provides an excellent high quality resource of data that can be used by future researchers to find a rigorous, theoretically sound, and straightforward technique for standardizing LWD determination of modulus and construction QA for unbound pavement materials.

Metacommunity Versus Biogeography: A Case Study Of Two Groups Of Neotropical Vegetation-dwelling Arthropods.

Biogeography and metacommunity ecology provide two different perspectives on species diversity. Both are spatial in nature but their spatial scales do not necessarily match. With recent boom of metacommunity studies, we see an increasing need for clear discrimination of spatial scales relevant for both perspectives. This discrimination is a necessary prerequisite for improved understanding of ecological phenomena across scales. Here we provide a case study to illustrate some spatial scale-dependent concepts in recent metacommunity studies and identify potential pitfalls. We presented here the diversity patterns of Neotropical lepidopterans and spiders viewed both from metacommunity and biogeographical perspectives. Specifically, we investigated how the relative importance of niche- and dispersal-based processes for community assembly change at two spatial scales: metacommunity scale, i.e. within a locality, and biogeographical scale, i.e. among localities widely scattered along a macroclimatic gradient. As expected, niche-based processes dominated the community assembly at metacommunity scale, while dispersal-based processes played a major role at biogeographical scale for both taxonomical groups. However, we also observed small but significant spatial effects at metacommunity scale and environmental effects at biogeographical scale. We also observed differences in diversity patterns between the two taxonomical groups corresponding to differences in their dispersal modes. Our results thus support the idea of continuity of processes interactively shaping diversity patterns across scales and emphasize the necessity of integration of metacommunity and biogeographical perspectives.

Validation of an experimental polyurethane model for biomechanical studies on implant supported prosthesis - tension tests

OBJECTIVES: The complexity and heterogeneity of human bone, as well as ethical issues, frequently hinder the development of clinical trials. The purpose of this in vitro study was to determine the modulus of elasticity of a polyurethane isotropic experimental model via tension tests, comparing the results to those reported in the literature for mandibular bone, in order to validate the use of such a model in lieu of mandibular bone in biomechanical studies. MATERIAL AND METHODS: Forty-five polyurethane test specimens were divided into 3 groups of 15 specimens each, according to the ratio (A/B) of polyurethane reagents (PU-1: 1/0.5, PU-2: 1/1, PU-3: 1/1.5). RESULTS: Tension tests were performed in each experimental group and the modulus of elasticity values found were 192.98 MPa (SD=57.20) for PU-1, 347.90 MPa (SD=109.54) for PU-2 and 304.64 MPa (SD=25.48) for PU-3. CONCLUSION: The concentration of choice for building the experimental model was 1/1.

Validation of an experimental polyurethane model for biomechanical studies on implant-supported prosthesis: compression tests

OBJECTIVES: The complexity and heterogeneity of human bone, as well as ethical issues, most always hinder the performance of clinical trials. Thus, in vitro studies become an important source of information for the understanding of biomechanical events on implant-supported prostheses, although study results cannot be considered reliable unless validation studies are conducted. The purpose of this work was to validate an artificial experimental model based on its modulus of elasticity, to simulate the performance of human bone in vivo in biomechanical studies of implant-supported prostheses. MATERIAL AND METHODS: In this study, fast-curing polyurethane (F16 polyurethane, Axson) was used to build 40 specimens that were divided into five groups. The following reagent ratios (part A/part B) were used: Group A (0.5/1.0), Group B (0.8/1.0), Group C (1.0/1.0), Group D (1.2/1.0), and Group E (1.5/1.0). A universal testing machine (Kratos model K - 2000 MP) was used to measure modulus of elasticity values by compression. RESULTS: Mean modulus of elasticity values were: Group A - 389.72 MPa, Group B - 529.19 MPa, Group C - 571.11 MPa, Group D - 470.35 MPa, Group E - 437.36 MPa. CONCLUSION: The best mechanical characteristics and modulus of elasticity value comparable to that of human trabecular bone were obtained when A/B ratio was 1:1.