Determinação da crítica razão esforço-pausa em Uchi-Komi no judô, com a utilização de deltas de variação de lactato sanguíneo e da escala subjetiva de esforço de Borg

In the competitive judo, the form as a trainer organizes the process of his/her athlete's training is a very important task for a good acting and a better use of the technical procedures. There is great importance in determining the exercise intensity for the judocas training due to the interest for the high income in several competitions, and few studies returned for this research area, involving those athletes' different physiologic conditions. Therefore, it is necessary to improve protocols of physical evaluation for this modality, increasing his/her applicability. The present study aimed at to verify the validity of a protocol of specific aerobic test of the judo (technique ipon-seoi-nague), no exhausting, adapted of the method of CHASSAIN (1986), using deltas of variations of the lactacidemia and of the Scale of Perception of Effort of Borg, in athletes well. The test adapted to the judo constituted of four exercise series with two efforts similar (double) of 180 seconds with one interval of 90 seconds among them. The series of exercises were accomplished in consecutive days. The intensities of the double tests were of 85%, 95%, 105% and 115% of the minimum lactato for each participant. This work used the technique ipon-seoi-nague, obeying the reasons effort-pause individualized for each athlete, that you/they correspond to the intensities of exercises proposed by the protocol of CHASSAIN (1986). In that way, the athletes applied a blow (maximum speed) and they rested some seconds, depending on the regime effort-pause of the session. At the end of each collection collection of blood (25NL) of each participant's earlobe was accomplished, seeking to measure the concentration of sanguine lactato. The collections were accomplished at the end of the first and of the second efforts, in each one of the series. For the analysis of the Perception of the athletes' Effort, the Scale of Perception... (Complete abstract click electronic access below)

Determinação de fumosina B1, por CLAE: estudo da estabilidade do derivado fumonisina B1-orto-ftaldialdeído

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Determinação de fumonisina B1 por CLAE: estudo da estabilidade do derivado fumonisina B1-orto-ftaldialdeído

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ultrassonografia modo b e elastografia arfi pulmonar e hepática fetal como método preditivo para a maturidade dos conceptos em fase final de gestação de cadelas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Imagens contrastadas por manganês na fase aguda da epilepsia induzida por pilocarpina

As imagens de ressonância magnética são úteis no estudo de modelos experimentais de epilepsia do lobo temporal. A técnica manganese-enhanced MRI (MEMRI) é de interesse por combinar os efeitos provocados pelo manganês no aumento do contraste de populações celulares ativadas, ao competir com o cálcio na transmissão sináptica. Assim, o propósito deste estudo foi investigar a evolução temporal do contraste provocado pelo manganês na fase aguda da epilepsia do lobo temporal induzida por pilocarpina sistêmica e compará-las à expressão da proteína c-Fos. Nessa fase, a intensidade do sinal MEMRI foi analisada em três diferentes pontos temporais (5, 15 ou 30 minutos) após o início do status epilepticus (SE). O grupo que foi mantido em status epilepticus por 30 minutos mostrou diminuição na intensidade de sinal no CA1 e giro denteado (GD). Não houve diferenças entre o Grupo Controle e os outros grupos tratados com pilocarpina. A expressão da proteína c-Fos, nos mesmos animais, mostrou que, mesmo no status epilepticus de curta duração (5 minutos) já há ativação celular máxima nas sub-regiões do hipocampo (GD, CA1 e CA3). Nas condições experimentais testadas, nossos dados sugerem que o sinal MEMRI não foi sensível para identificar variações detectáveis da ativação celular na fase aguda do modelo de pilocarpina. Nossos achados não são consistentes com a ideia que o contraste por manganês reflete primariamente alterações na atividade celular durante o SE quando outros elementos modificadores do sinal podem atuar.

ANÁLISE COMPARATIVA DO NÚMERO DE CONTATOS OCLUSAIS AO FINAL DA FASE DE CONTENÇÃO, E APÓS UM PERÍODO DE 5 ANOS, EM PACIENTES COM MÁ-OCLUSÃO DE CLASSE II, TRATADOS COM EXTRAÇÕES DE 4 PRÉ- MOLARES.

Realizou-se um estudo comparativo do número de pontos de contato oclusais na posição de máxima intercuspidação habitual em uma amostra composta por 14 pacientes leucodermas, sendo 9 do sexo feminino e 5 do sexo masculino, com máoclusão de Classe II, divisão 1a de Angle, tratados ortodonticamente pela técnica de Edgewise, com extrações dos 4 primeiros pré-molares. Estes pontos foram registrados em dois tempos: T1 - ao final da fase de contenção superior e T2 - após um período médio de 5,2 anos. A contagem dos contatos oclusais foram realizadas nos arcos superior e inferior, separadamente, para as regiões anterior e posteriores. Depois da análise estatística, pôde-se concluir que não houve diferença estatisticamente significante entre o número médio de contatos oclusais nos diferentes períodos estudados.(AU)

ANÁLISE COMPARATIVA DO NÚMERO DE CONTATOS OCLUSAIS AO FINAL DA FASE DE CONTENÇÃO, E APÓS UM PERÍODO DE 5 ANOS, EM PACIENTES COM MÁ-OCLUSÃO DE CLASSE II, TRATADOS COM EXTRAÇÕES DE 4 PRÉ- MOLARES.

Realizou-se um estudo comparativo do número de pontos de contato oclusais na posição de máxima intercuspidação habitual em uma amostra composta por 14 pacientes leucodermas, sendo 9 do sexo feminino e 5 do sexo masculino, com máoclusão de Classe II, divisão 1a de Angle, tratados ortodonticamente pela técnica de Edgewise, com extrações dos 4 primeiros pré-molares. Estes pontos foram registrados em dois tempos: T1 - ao final da fase de contenção superior e T2 - após um período médio de 5,2 anos. A contagem dos contatos oclusais foram realizadas nos arcos superior e inferior, separadamente, para as regiões anterior e posteriores. Depois da análise estatística, pôde-se concluir que não houve diferença estatisticamente significante entre o número médio de contatos oclusais nos diferentes períodos estudados.(AU)

Produção de biohidrogênio a partir de soro de leite em AnSBBR com recirculação da fase líquida

O presente estudo investigou a aplicação de dois tipos de AnSBBR (reatores anaeróbio com biofilme e operados em batelada e batelada alimentada sequenciais: com recirculação da fase líquida e com agitação) para produção de biohidrogênio tratando água residuária sintética (a base de soro de leite e lactose, respectivamente). O AnSBBR com recirculação da fase líquida, que foi o estudo principal do presente trabalho, apresentou problemas na produção de hidrogênio utilizando soro de leite como substrato. Algumas alternativas, como adaptação da biomassa com substratos puros de degradação mais fácil, controle do pH em valores muito baixos e diferentes formas de inoculação foram testadas, entretanto, sem obtenção de sucesso. A solução do problema foi obtida ao refrigerar o meio de alimentação a 4ºC para evitar a fermentação no frasco de armazenamento, retirar a ureia e a suplementação de nutrientes, e realizar lavagens periódicas do material suporte para retirada de parte da biomassa. Dessa forma eliminaram-se indícios de produção de H2S por possível ação de bactérias redutoras de sulfato (BRS) e atingiu-se uma produção estável de hidrogênio sem, entretanto, eliminar completamento o metano, que foi produzido em baixas concentrações. Depois de atingida a estabilidade, investigou-se a influência da concentração afluente de substrato, do tempo de enchimento e da temperatura na produção de biohidrogênio no AnSBBR com recirculação da fase líquida tratando soro de leite. O estudo da concentração afluente apresentou um ponto ótimo para a concentração de 5400 mgDQO.L-1, atingindo valores de 0,80 mol H2.mol-1 lactose e de 660 mL H2.L-1.d-1. O estudo do tempo de enchimento apresentou resultados similares para as condições analisadas. Com relação à temperatura, os melhores resultados foram obtidos com a temperatura mais baixa testada de 15ºC (1,12 mol H2.mol lactose-1 e 1080 mL H2.L-1.d-1), sendo que na temperatura mais alta testada (45°C) não ocorreu produção de hidrogênio. Para o AnSBBR com agitação mecânica, que foi um estudado complementar realizado pelo fato da lactose ser o principal complemento do soro de leite, o desempenho do biorreator foi avaliado de acordo com influência conjunta do tempo de ciclo (tC – 2, 3 e 4 h), da concentração afluente (CSTA – 3600-5400 mgDQO.L-1) e da carga orgânica volumétrica aplicada (COAV – 9,3, 12,3, 13,9, 18,5 e 27,8 mgDQO.L-1.d-1). Foram obtidos excelentes resultados: consumos de carboidratos (lactose), com valores médios sempre acima de 90% e uma produção estável de biohidrogênio em todas as condições estudadas, com metano em baixas concentrações apenas na condição de maior COAV. A diminuição do tC apresentou tendência clara de melhora sobre o RMCRC,n (rendimento molar entre hidrogênio produzido e carboidrato removido) apenas para as condições com menor concentração CSTA, havendo uma relação direta entre CSTA, e RMCRC,n em todos os valores de tC, exceto para o tempo de ciclo de 3 h, exatamente onde ocorreu produção de metano. O melhor valor de RMCRC,n obtido na operação com lactose (1,65 mol H2.mol Carboidrato-1) foi superior aos obtidos em outros trabalhos utilizando a mesma configuração de reator e sacarose como substrato. As análises filogenéticas mostraram que a maioria dos clones analisados foi semelhante à Clostridium. Além destes, clones filogeneticamente semelhantes com a Família Lactobacilaceae, especificamente Lactobacillus rhamnosus foram observados em menor porcentagem no reator, assim como clones com sequências semelhantes a Acetobacter indonesiensis.

ANÁLISE COMPARATIVA DO NÚMERO DE CONTATOS OCLUSAIS AO FINAL DA FASE DE CONTENÇÃO, E APÓS UM PERÍODO DE 5 ANOS, EM PACIENTES COM MÁ-OCLUSÃO DE CLASSE II, TRATADOS COM EXTRAÇÕES DE 4 PRÉ- MOLARES.

Realizou-se um estudo comparativo do número de pontos de contato oclusais na posição de máxima intercuspidação habitual em uma amostra composta por 14 pacientes leucodermas, sendo 9 do sexo feminino e 5 do sexo masculino, com máoclusão de Classe II, divisão 1a de Angle, tratados ortodonticamente pela técnica de Edgewise, com extrações dos 4 primeiros pré-molares. Estes pontos foram registrados em dois tempos: T1 - ao final da fase de contenção superior e T2 - após um período médio de 5,2 anos. A contagem dos contatos oclusais foram realizadas nos arcos superior e inferior, separadamente, para as regiões anterior e posteriores. Depois da análise estatística, pôde-se concluir que não houve diferença estatisticamente significante entre o número médio de contatos oclusais nos diferentes períodos estudados.(AU)

Uma investigação das sequências de fase Hebbianas descritas como grafos de assembleias neuronais

Hebb proposed that synapses between neurons that fire synchronously are strengthened, forming cell assemblies and phase sequences. The former, on a shorter scale, are ensembles of synchronized cells that function transiently as a closed processing system; the latter, on a larger scale, correspond to the sequential activation of cell assemblies able to represent percepts and behaviors. Nowadays, the recording of large neuronal populations allows for the detection of multiple cell assemblies. Within Hebb’s theory, the next logical step is the analysis of phase sequences. Here we detected phase sequences as consecutive assembly activation patterns, and then analyzed their graph attributes in relation to behavior. We investigated action potentials recorded from the adult rat hippocampus and neocortex before, during and after novel object exploration (experimental periods). Within assembly graphs, each assembly corresponded to a node, and each edge corresponded to the temporal sequence of consecutive node activations. The sum of all assembly activations was proportional to firing rates, but the activity of individual assemblies was not. Assembly repertoire was stable across experimental periods, suggesting that novel experience does not create new assemblies in the adult rat. Assembly graph attributes, on the other hand, varied significantly across behavioral states and experimental periods, and were separable enough to correctly classify experimental periods (Naïve Bayes classifier; maximum AUROCs ranging from 0.55 to 0.99) and behavioral states (waking, slow wave sleep, and rapid eye movement sleep; maximum AUROCs ranging from 0.64 to 0.98). Our findings agree with Hebb’s view that neuronal assemblies correspond to primitive building blocks of representation, nearly unchanged in 10 the adult, while phase sequences are labile across behavioral states and change after novel experience. The results are compatible with a role for phase sequences in behavior and cognition

Influência de mudanças de fase no ciclo claro-escuro sobre o controle autonômico cardíaco de ratos

Introduction: The circadian system has neural projections for the Autonomic Nervous System (ANS), directly interfering with sympathetic-vagal modulation of the cardiovascular system. Disturbances in the circadian system, such as phase changes in light-dark cycle (LD), has been related to the risk of development of cardiovascular diseases due to increased sympathetic tone and reduction o Heart Rate Variability (HRV - RR intervals). Purpose: Investigate the interaction between Circadian Timing System and cardiac autonomic control in rats. Materials and methods: We used 18 Wistar rats (♀, age = 139.9 ± 32.1 days, weight = 219.5 ± 16.2 g), divided into three distinct groups: Control (CG), phase delay of 6h (GDe) and phase advance of 6h (GAd). Three animals were excluded during data collection (CG/GDe/GAd - n=5). Telemeters were surgically implanted in each animal for continuous acquisition of electrocardiographic (ECG) signals (duration of 21 days in the CG and 28 days in GDe/ GAd). A LD cycle was established 12h: 12h, beginning of light at18:00h and dark at 06:00h. The animals remained in the same CG LD cycle throughout the experimental period, while, on the 14th day of registration, the GDe and GAd underwent a delay and an advance in 6h, respectively. Throughout the experimental period, the locomotor activity (LA), the mean heart rate (mHR) and variables related to iRR [mean RR (mRR), SDNN, RMSSD, LF, HF and LF/ HF ratio ] were recorded. All data were analyzed in blocks of 3 and 7 days, for the presence of circadian rhythm, values of Cosinor - mesor, amplitude and acrophase (paired t test), phase relationship, differences between light and dark (t test independent), averages every 30 minutes along each time series (two-way ANOVA with post hoc Bonferroni). The data block B1,M1 and M2 in CG served as benchmarks for comparisons between series of analysis of the GAT/GAV. Results: We observed circadian rhythmicity in the variables LA, mRR and mFC(p<0.01). mRR and mFC showed phase relationship with the LA in all three groups, being less stable in GAd. In the CG, no significant differences between blocks were found in any of the analyzes(p>0.05). Among the 7 day blocks, there was a significant reduction in mRR(p=0.04) and mFC(p=0.03) in GDe and significant reduction in HF mean(p=0.02) in GAd; and between 3 day blocks, a significant increase of LF/HF(p= 0.04) in the GDe; besides mRR(p=0.03), SDNN(p=0.04), RMSSD (p=0.04), LF (p=0.01) and HF(p=0.02) significant increase in the GAd. It was found that the differences between the means of the mRR, LA and mFC in light and dark phases were not significant after phase changes in some of the blocks/moments (GDe and GAd). No significant results were found when comparing rhythmic variables means every 30 minutes over the blocks, except for a significant decrease in mRR at the middle of the dark phase (B2) and the start of light phase (B3) - (p<0.01). Conclusion: phase advances and delays (6h) altered cardiac autonomic control in the experimental groups by temporarily HRV decrease. Phase advances apparently had greater negative interference in this process, in relation to the phase delays.

Estudo comparativo de dois conversores Boost quadrático com comutação suave monochaveados para aplicação de rastreamento de máxima potência em sistemas fotovoltaicos

This paper makes a comparative study of two Soft Single Switched Quadratic Boost Converters (SSS1 and SSS2) focused on Maximum Power Point Tracking (MPPT) of a PV array using Perturb and Observe (P&O) algorithm. The proposed converters maintain the static gain characteristics and dynamics of the original converter with the advantage of considerably reducing the switching losses and Electromagnetic Interference (EMI). It is displayed the input voltage Quadratic Boost converter modeling; qualitative and quantitative analysis of soft switching converters, defining the operation principles, main waveforms, time intervals and the state variables in each operation steps, phase planes of resonant elements, static voltage gain expressions, analysis of voltage and current efforts in semiconductors and the operational curves at 200 W to 800 W. There are presented project of PI, PID and PID + Notch compensators for MPPT closed-loop system and resonant elements design. In order to analyze the operation of a complete photovoltaic system connected to the grid, it was chosen to simulate a three-phase inverter using the P-Q control theory of three-phase instantaneous power. Finally, the simulation results and experimental with the necessary comparative analysis of the proposed converters will be presented.

Functional alkali tantalate 2D structures for microelectronics and related applications

Alkali tantalates and niobates, including K(Ta / Nb)O3, Li(Ta / Nb)O3 and Na(Ta / Nb)O3, are a very promising ferroic family of lead-free compounds with perovskite-like structures. Their versatile properties make them potentially interesting for current and future application in microelectronics, photocatalysis, energy and biomedics. Among them potassium tantalate, KTaO3 (KTO), has been raising interest as an alternative for the well-known strontium titanate, SrTiO3 (STO). KTO is a perovskite oxide with a quantum paraelectric behaviour when electrically stimulated and a highly polarizable lattice, giving opportunity to tailor its properties via external or internal stimuli. However problems related with the fabrication of either bulk or 2D nanostructures makes KTO not yet a viable alternative to STO. Within this context and to contribute scientifically to the leverage tantalate based compounds applications, the main goals of this thesis are: i) to produce and characterise thin films of alkali tantalates by chemical solution deposition on rigid Si based substrates, at reduced temperatures to be compatible with Si technology, ii) to fulfil scientific knowledge gaps in these relevant functional materials related to their energetics and ii) to exploit alternative applications for alkali tantalates, as photocatalysis. In what concerns the synthesis attention was given to the understanding of the phase formation in potassium tantalate synthesized via distinct routes, to control the crystallization of desired perovskite structure and to avoid low temperature pyrochlore or K-deficient phases. The phase formation process in alkali tantalates is far from being deeply analysed, as in the case of Pb-containing perovskites, therefore the work was initially focused on the process-phase relationship to identify the driving forces responsible to regulate the synthesis. Comparison of phase formation paths in conventional solid-state reaction and sol-gel method was conducted. The structural analyses revealed that intermediate pyrochlore K2Ta2O6 structure is not formed at any stage of the reaction using conventional solid-state reaction. On the other hand in the solution based processes, as alkoxide-based route, the crystallization of the perovskite occurs through the intermediate pyrochlore phase; at low temperatures pyrochlore is dominant and it is transformed to perovskite at >800 °C. The kinetic analysis carried out by using Johnson-MehlAvrami-Kolmogorow model and quantitative X-ray diffraction (XRD) demonstrated that in sol-gel derived powders the crystallization occurs in two stages: i) at early stage of the reaction dominated by primary nucleation, the mechanism is phase-boundary controlled, and ii) at the second stage the low value of Avrami exponent, n ~ 0.3, does not follow any reported category, thus not permitting an easy identification of the mechanism. Then, in collaboration with Prof. Alexandra Navrotsky group from the University of California at Davis (USA), thermodynamic studies were conducted, using high temperature oxide melt solution calorimetry. The enthalpies of formation of three structures: pyrochlore, perovskite and tetragonal tungsten bronze K6Ta10.8O30 (TTB) were calculated. The enthalpies of formation from corresponding oxides, ∆Hfox, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -203.63 ± 2.84 kJ/mol, - 358.02 ± 3.74 kJ/mol, and -1252.34 ± 10.10 kJ/mol, respectively, whereas from elements, ∆Hfel, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -1408.96 ± 3.73 kJ/mol, -2790.82 ± 6.06 kJ/mol, and -13393.04 ± 31.15 kJ/mol, respectively. The possible decomposition reactions of K-deficient KTa2.2O6 pyrochlore to KTaO3 perovskite and Ta2O5 (reaction 1) or to TTB K6Ta10.8O30 and Ta2O5 (reaction 2) were proposed, and the enthalpies were calculated to be 308.79 ± 4.41 kJ/mol and 895.79 ± 8.64 kJ/mol for reaction 1 and reaction 2, respectively. The reactions are strongly endothermic, indicating that these decompositions are energetically unfavourable, since it is unlikely that any entropy term could override such a large positive enthalpy. The energetic studies prove that pyrochlore is energetically more stable phase than perovskite at low temperature. Thus, the local order of the amorphous precipitates drives the crystallization into the most favourable structure that is the pyrochlore one with similar local organization; the distance between nearest neighbours in the amorphous or short-range ordered phase is very close to that in pyrochlore. Taking into account the stoichiometric deviation in KTO system, the selection of the most appropriate fabrication / deposition technique in thin films technology is a key issue, especially concerning complex ferroelectric oxides. Chemical solution deposition has been widely reported as a processing method to growth KTO thin films, but classical alkoxide route allows to crystallize perovskite phase at temperatures >800 °C, while the temperature endurance of platinized Si wafers is ~700 °C. Therefore, alternative diol-based routes, with distinct potassium carboxylate precursors, was developed aiming to stabilize the precursor solution, to avoid using toxic solvents and to decrease the crystallization temperature of the perovskite phase. Studies on powders revealed that in the case of KTOac (solution based on potassium acetate), a mixture of perovskite and pyrochlore phases is detected at temperature as low as 450 °C, and gradual transformation into monophasic perovskite structure occurs as temperature increases up to 750 °C, however the desired monophasic KTaO3 perovskite phase is not achieved. In the case of KTOacac (solution with potassium acetylacetonate), a broad peak is detected at temperatures <650 °C, characteristic of amorphous structures, while at higher temperatures diffraction lines from pyrochlore and perovskite phases are visible and a monophasic perovskite KTaO3 is formed at >700 °C. Infrared analysis indicated that the differences are due to a strong deformation of the carbonate-based structures upon heating. A series of thin films of alkali tantalates were spin-coated onto Si-based substrates using diol-based routes. Interestingly, monophasic perovskite KTaO3 films deposited using KTOacac solution were obtained at temperature as low as 650 °C; films were annealed in rapid thermal furnace in oxygen atmosphere for 5 min with heating rate 30 °C/sec. Other compositions of the tantalum based system as LiTaO3 (LTO) and NaTaO3 (NTO), were successfully derived as well, onto Si substrates at 650 °C as well. The ferroelectric character of LTO at room temperature was proved. Some of dielectric properties of KTO could not be measured in parallel capacitor configuration due to either substrate-film or filmelectrode interfaces. Thus, further studies have to be conducted to overcome this issue. Application-oriented studies have also been conducted; two case studies: i) photocatalytic activity of alkali tantalates and niobates for decomposition of pollutant, and ii) bioactivity of alkali tantalate ferroelectric films as functional coatings for bone regeneration. Much attention has been recently paid to develop new type of photocatalytic materials, and tantalum and niobium oxide based compositions have demonstrated to be active photocatalysts for water splitting due to high potential of the conduction bands. Thus, various powders of alkali tantalates and niobates families were tested as catalysts for methylene blue degradation. Results showed promising activities for some of the tested compounds, and KNbO3 is the most active among them, reaching over 50 % degradation of the dye after 7 h under UVA exposure. However further modifications of powders can improve the performance. In the context of bone regeneration, it is important to have platforms that with appropriate stimuli can support the attachment and direct the growth, proliferation and differentiation of the cells. In lieu of this here we exploited an alternative strategy for bone implants or repairs, based on charged mediating signals for bone regeneration. This strategy includes coating metallic 316L-type stainless steel (316L-SST) substrates with charged, functionalized via electrical charging or UV-light irradiation, ferroelectric LiTaO3 layers. It was demonstrated that the formation of surface calcium phosphates and protein adsorption is considerably enhanced for 316L-SST functionalized ferroelectric coatings. Our approach can be viewed as a set of guidelines for the development of platforms electrically functionalized that can stimulate tissue regeneration promoting direct integration of the implant in the host tissue by bone ingrowth and, hence contributing ultimately to reduce implant failure.

Proteína C reactiva y lactato deshidrogenasa en el diagnóstico de la obstrucción intestinal en un servicio de urgencias

Fundamento. La obstrucción intestinal es una de las urgencias quirúrgicas más frecuentes. Su diagnóstico se basa esencialmente en la historia clínica, la exploración física y las pruebas de imagen. El objetivo de este estudio fue analizar el valor diagnóstico de reactantes de fase aguda en en la obstrucción intestinal y discernir su naturaleza benigna versus maligna. Método. Se ha realizado un estudio de cohortes histórico sobre 53 pacientes sometidos a cirugía por obstrucción intestinal y/o cáncer colorrectal no obstructivo. Los pacientes se encuadraron en 3 grupos: grupo 1 (cáncer colorrectal con obstrucción intestinal) (n=23), grupo 2 (obstrucción intestinal benigna) (n=10) y grupo 3 (cáncer de colon no obstructivo) (n= 20). Se determinan los valores plasmáticos iniciales de la proteína C reactiva (PCR) y el enzima lactato deshidrogenasa (LDH). Resultados. La PCR se elevó cuantitativamente más en pacientes con obstrucción intestinal benigna (grupo 2) (p=0,001), mientras que la LDH en el grupo 1 (pacientes con cáncer obstructivo). Los niveles plasmáticos de LDH fueron significativamente mayores en los grupos con obstrucción intestinal (Grupos 1 y 2) que en pacientes sin obstrucción (p<0,001). Niveles plasmáticos de PCR mayores de 11 mg/l y de LDH mayores de 317 U/L mostraron una validez diagnóstica aceptable para diferenciar los pacientes con obstrucción intestinal, con áreas bajo la curva ROC de 80% (IC 95% = 68-92%) y de 86% (IC 95%= 75-96%) respectivamente. Su validez diagnóstica para diferenciar el origen benigno o maligno es menor, con áreas bajo la curva ROC de 56% para niveles de PCR > 24 ng/l (IC 95% = 30-82%) y de 52% (IC 95% = 29-74%) para niveles de LDH > 359 U/L. Conclusión. La determinación de las concentraciones plasmáticas de la PCR y la LDH pueden ayudar al diagnóstico de la obstrucción intestinal y orientar hacia su origen benigno o maligno en los servicios de urgencias.

Novos sorventes baseados em poli (metiloctilsiloxano) sobre sílica para uso em extração em fase sólida

This paper presents an easy and practical procedure to obtain silica-based C-8 type sorbents for use in solid-phase extraction. The materials are prepared by depositing poly(methyloctylsiloxane), PMOS, on the silica support. Two different treatments for immobilization were used: thermal treatment or gamma irradiation. Suitable recoveries were obtained after pre-concentration of dilute solutions, at the ng/L level, of a mixture of pesticides, indicating the good performance of the materials.