Monitoring daily MLC positional errors using trajectory log files and EPID measurements for IMRT and VMAT deliveries

This work investigated the differences between multileaf collimator (MLC) positioning accuracy determined using either log files or electronic portal imaging devices (EPID) and then assessed the possibility of reducing patient specific quality control (QC) via phantom-less methodologies. In-house software was developed, and validated, to track MLC positional accuracy with the rotational and static gantry picket fence tests using an integrated electronic portal image. This software was used to monitor MLC daily performance over a 1 year period for two Varian TrueBeam linear accelerators, with the results directly compared with MLC positions determined using leaf trajectory log files. This software was validated by introducing known shifts and collimator errors. Skewness of the MLCs was found to be 0.03 ± 0.06° (mean ±1 standard deviation (SD)) and was dependent on whether the collimator was rotated manually or automatically. Trajectory log files, analysed using in-house software, showed average MLC positioning errors with a magnitude of 0.004 ± 0.003 mm (rotational) and 0.004 ± 0.011 mm (static) across two TrueBeam units over 1 year (mean ±1 SD). These ranges, as indicated by the SD, were lower than the related average MLC positioning errors of 0.000 ± 0.025 mm (rotational) and 0.000 ± 0.039 mm (static) that were obtained using the in-house EPID based software. The range of EPID measured MLC positional errors was larger due to the inherent uncertainties of the procedure. Over the duration of the study, multiple MLC positional errors were detected using the EPID based software but these same errors were not detected using the trajectory log files. This work shows the importance of increasing linac specific QC when phantom-less methodologies, such as the use of log files, are used to reduce patient specific QC. Tolerances of 0.25 mm have been created for the MLC positional errors using the EPID-based automated picket fence test. The software allows diagnosis of any specific leaf that needs repair and gives an indication as to the course of action that is required.

An archaeological approach to the development of the late medieval peasant house

Archaeological excavation has provided an alternative source of evidence for the development of the late medieval peasant house. It is argued that whilst there was a significant change in building techniques in the decades around 1200 with the adoption of ground-set timbers, the most important factor which led to the survival of houses was a fall in real wages during the thirteenth century. This encouraged peasants to repair existing buildings, rather than replace them with new ones. Alternative traditions of building are also investigated. Stone construction was adopted in a number of areas of England, but in spite of the durability of the material, few medieval peasant buildings of this type have survived in use because of the failure to use lime mortar. Decisions about whether to invest in a building’s renovation will depend on the capital initially expended upon it. This interpretation is considered against the data from the fifteenth century and found to conform satisfactorily. Its implications are considered for the period between 1200 and 1350. Data collected from archaeological excavations combined with the results of dendrochronology on a growing number of closely dated standing buildings suggest that there was a significant ‘cull’ of houses in the period after 1350 as new dwellings were constructed.

Parker Morris and the economies of the Fordist house

The Parker Morris report of 1961 attempted, through the application of scientific principles, to define the minimum living space standards needed to accommodate household activities. But while early modernist research into ideas of existenzminimum were the work of avant-garde architects and thinkers, this report was commissioned by the British State. This normalization of scientific enquiry into space can be considered not only a response to new conditions in the mass production of housing – economies of scale, prefabrication, system-building and modular coordination – but also to the post-war boom in consumer goods. The domestic interior was assigned a key role as a privileged site of mass consumption as the production and micro-management of space in Britain became integral to the development of a planned national economy underpinned by Fordist principles. The apparently placeless and scale-less diagrams executed by Gordon Cullen to illustrate Parker Morris emblematize these relationships. Walls dissolve as space flows from inside to outside in a homogenized and ephemeral landscape whose limits are perhaps only the boundaries of the nation state and the circuits of capital.

The Distribution and Adoption of the Byre-house (Longhouse) in Late Medieval Britain

It has long been recognized that the byre-house or longhouse, in which animals and humans lived in the same building and with direct contact, was a distinctive building plan. Earlier interpretations have seen it as a ubiquitous house type found throughout Britain, but gradually replaced by separate buildings for keeping animals and accommodating humans. More recent work has suggested that it was a regional variant of the common late medieval domestic plan. The use of this building type was restricted to parts of Wales, and northern and western areas of England. It is argued that the introduction of the byre-house occurs mainly in the thirteenth century as part of a wider trend to provide accommodation for livestock during the winter months. The byre-house was a one response to this need, and its adoption was not due to climatic or geographical factors. Instead, it is interpreted as reflecting localized cultural attitudes to the relationship between humans and animals.

Parker Morris and the Fordist House

6.00 pm. If people like watching T.V. while they are eating their evening meal, space for a low table is needed (Ministry of Housing and Local Government, Space in the Home, 1963, p. 4).

This paper re-examines the 1961 Parker Morris report on housing standards in Britain. It explores the origins, scope, text and iconography of the report and suggests that these not only express a particularly modernist conception of space but one which presupposed very specific economic conditions and geographies.

Also known as Homes for Today and Tomorrow Parker Morris attempted, through the application of scientific principles, to define the minimum living space standards needed to accommodate household activities. But while early modernist research into notions of existenzminimum were the work of avant-garde architects and thinkers, Homes for Today and Tomorrow and its sister design manual Space in the Home were commissioned by the British State. This normalization of scientific enquiry into space can be considered not only as a response to new conditions in the mass production of housing – economies of scale, prefabrication, system-building and modular coordination – but also to the post-war boom in consumer goods. In this, it is suggested that the domestic interior was assigned a key role as a privileged site of mass consumption as the production and micro-management of space in Britain became integral to the development of a planned national economy underpinned by Fordist principles. Parker Morris, therefore, sought to accommodate activities which were pre-determined not so much by traditional social or familial ties but rather by recently introduced commodities such as the television set, white goods, table tennis tables and train sets. This relationship between the domestic interior and the national economy are emblematized by the series of placeless and scale-less diagrams executed by Gordon Cullen in Space in the Home. Here, walls dissolve as space flows from inside to outside in a homogenized and ephemeral landscape whose limits are perhaps only the boundaries of the nation state and the circuits of capital.

In Britain, Parker Morris was the last explicit State-sponsored attempt to prescribe a normative spatial programme for national living. The calm neutral efficiency of family-life expressed in its diagrams was almost immediately problematised by the rise of 1960s counter-culture, the feminist movement and the oil crisis of 1972 which altered perhaps forever the spatial, temporal and economic conditions it had taken for granted. The debate on space-standards, however, continues.

David William Smith House correspondence, 1798 [transcription]

The correspondence from D.W. [David William] Smith to President Peter Russell regarding Smith’s desire to sell a certain piece of property in Newark (now Niagara-on-the-Lake, Ont.) to be used as a location for a common grammar school. The notice gives a description of the building situated on the property as being adaptable for the use of a school. The Board of Survey convened in December 1798 to examine Smith’s property and gave an appropriate valuation of the properties and buildings Smith was offering for sale. Smith was the deputy surveyor general of lands for Upper Canada.

La dimensión transnacional del movimiento feminista marroquí: génesis, desarrollo e impacto social (1980-2008)

Esta monografía busca explicar cómo han incidido el contexto internacional y las relaciones transnacionales en el movimiento feminista de Marruecos. De este modo, este estudio defiende que las Conferencias Mundiales sobre la Mujer de la ONU crearon una estructura de oportunidad política que favoreció el surgimiento y el desarrollo de este movimiento. Asimismo, dicho contexto construyó un espacio para que las activistas feministas marroquíes crearan y se insertaran en Redes de Defensa Transnacional, las cuales contribuyeron a cambiar la condición de la mujer en Marruecos, a través de reformas a los Códigos de Familia y Nacionalidad y el levantamiento de las reservas a la CEDAW. Para esto se hará un estudio interdisciplinario haciendo uso de la teoría de los movimientos sociales y del activismo transnacional. Igualmente, se utilizará una metodología cualitativa, principalmente a través de las herramientas del análisis de contenido y el trabajo de campo de la autora.

Urbanisation and its impact on building energy consumption and efficiency in China

The People's Republic of China and its 1.3 billion people have experienced a rapid economic growth in the past two decades. China's urbanisation ratio rose from around 20% in the early 1980s to 45% in 2007 [China Urban Research Committee. Green building. Beijing: Chinese Construction Industrial Publish House; 2008. ISBN 978-7-112-09925-2.]. The large volume and rapid speed of building construction rarely have been seen in global development and cause substantial pressure on resources and the environment. Government policy makers and building professionals, including architects, building engineers, project managers and property developers, should play an important role in enhancing the planning, design, construction, operation and maintenance of the building energy efficiency process in forming the sustainable urban development. This paper addresses the emerging issues relating to building energy consumption and building energy efficiency due to the fast urbanisation development in China.

House in the Shape of a Stretcher

In an essay from 1910 the architect and critic Adolf Loos distinguishes between buildings that are for everyday practical use and buildings made for contemplation. The latter type he asserts may be considered as both architecture and works of art. He refers to only two types of contemplative architecture namely the tomb and the monument. There are certain paintings made in the early part of the twentieth century that do not observe this separation such as certain works by Hopper and de Chirico. Here the commonplace is simultaneously experienced in the way a tomb might be. This mortifying gaze condemns building by inducing a sense that space has become inhospitable and alienating. It could be argued that these and other paintings made around this time such as Carlo Carra The Abandoned House 1916 are like premonitions of what will occur when building observes the prescription laid down by Loos and omit an aesthetic dimension. However it might also suggest that buildings need their tombs or at least some space that is not completely assimilable by the daily, practical and functional needs of an inhabitant.

Post-occupancy evaluation studies in recently refurbished office building: energy performance and employees' satisfaction

Existing buildings contribute greatly to global energy use and greenhouse gas emissions. In the UK, about 18% of carbon emissions are generated by non-domestic buildings; sustainable building refurbishment can play an important role in reducing carbon emissions. This paper looks at the performance of a recently refurbished 5-storey office building in London, in terms of energy consumption as well as occupants’ satisfaction. Pre- and post-occupancy evaluation studies were conducted using online questionnaire surveys and energy consumption evaluation. Results from pre-occupancy and post-occupancy evaluation studies showed that employees, in general, were more satisfied with their work environment at the refurbished building than with that of their previous office. Employees’ self-reported productivity improved after the move to Elms House. These surveys showed a positive relationship between employees’ satisfaction with their work environment and their self-reported productivity, well-being and enjoyment at work. The factor that contributed to increasing employee satisfaction the most was: better use of interior space. Although the refurbishment was a success in terms of reducing energy consumption per m2, the performance gap was almost 3 times greater than that estimated. Unregulated loads, problems with building control, ineffective use of space and occupants’ behaviour are argued to be reasons for this gap.

Passive solar options for reducing heating demand and maintain indoor climate in a multifamily house in Sweden

This research was carried out by studying possible renovation of a two-storey detached multifamily building by using passive solar design options in a cold climate in Borlänge, Sweden where the heating Degree Days are 4451 (base 20°C). Borlänge`s housing company, Tunabyggen, plans to renovate the project house located inthe multicultural district, Jakobsgårdarna. The goal of the thesis was to suggest a redesign of the current building, decrease the heating energy use, by applying passive solar design and control strategies, in a most reasonable way. In addition ensure a better thermal comfort for the tenants in the dwellings. Literatures have been studied, from which can be inferred that passive design should be abasic design consideration for all housing constructions, because it has advantages to ensure thermal comfort, and reduce the energy use. In addition further savings can be achieved applying different types of control strategies, from which the house will be more personalized, and better adapted to the user’s needs.The proposed method is based on simulations by using TRNSYS software. First a proper building model was set up, which represents the current state of the project building. Then the thermal insulation and the windows were upgraded, based on today's building regulations. The developments of the passive solar options were accomplished in two steps. First of all the relevant basic passive design elements were considered, then those advantages were compared to the advantages of applying new conventional thermostat, and shading control strategies.The results show that there is significant potential with the different types of passive solar design; their usage depends primarily on the location of the site as well as the orientation of the project building. Applying the control strategies, such as thermostat, and shading control, along the thermal insulation upgrade, may lead to significant energy savings (around 40 %), by comparison to the reference building without any upgrade.

Organizations redesign and building of information systems

Develop software is still a risky business. After 60 years of experience, this community is still not able to consistently build Information Systems (IS) for organizations with predictable quality, within previously agreed budget and time constraints. Although software is changeable we are still unable to cope with the amount and complexity of change that organizations demand for their IS. To improve results, developers followed two alternatives: Frameworks that increase productivity but constrain the flexibility of possible solutions; Agile ways of developing software that keep flexibility with less upfront commitments. With strict frameworks, specific hacks have to be put in place to get around the framework construction options. In time this leads to inconsistent architectures that are harder to maintain due to incomplete documentation and human resources turnover. The main goals of this work is to create a new way to develop flexible IS for organizations, using web technologies, in a faster, better and cheaper way that is more suited to handle organizational change. To do so we propose an adaptive object model that uses a new ontology for data and action with strict normalizing rules. These rules should bound the effects of changes that can be better tested and therefore corrected. Interfaces are built with templates of resources that can be reused and extended in a flexible way. The “state of the world” for each IS is determined by all production and coordination acts that agents performed over time, even those performed by external systems. When bugs are found during maintenance, their past cascading effects can be checked through simulation, re-running the log of transaction acts over time and checking results with previous records. This work implements a prototype with part of the proposed system in order to have a preliminary assessment its feasibility and limitations.

An Affordable, Pratical Eco-House

An eco-house or zero-energy house is not a new concept- houses with extremely low impact on their surroundings and good use of local resources have been around for centuries. This particular eco-house is designed to offer full modern services and comforts while consuming very low energy and few expensive building materials. Ideally, someone would be able to use this thesis as a blueprint for actual construction.

Two-chamber Rocket Box Bat House Plans

Plans and instructions for building a “Two-chamber Rocket Box” bat-house to accommodate large numbers (>200) of bats. See further: http://www.batcon.org/educatorsK/pdfs/fof_bathouse.pdf

Femur Specific Polyaffine Model to Regularize the Log-Domain Demons Registration

Osteoarticular allograft transplantation is a popular treatment method in wide surgical resections with large defects. For this reason hospitals are building bone data banks. Performing the optimal allograft selection on bone banks is crucial to the surgical outcome and patient recovery. However, current approaches are very time consuming hindering an efficient selection. We present an automatic method based on registration of femur bones to overcome this limitation. We introduce a new regularization term for the log-domain demons algorithm. This term replaces the standard Gaussian smoothing with a femur specific polyaffine model. The polyaffine femur model is constructed with two affine (femoral head and condyles) and one rigid (shaft) transformation. Our main contribution in this paper is to show that the demons algorithm can be improved in specific cases with an appropriate model. We are not trying to find the most optimal polyaffine model of the femur, but the simplest model with a minimal number of parameters. There is no need to optimize for different number of regions, boundaries and choice of weights, since this fine tuning will be done automatically by a final demons relaxation step with Gaussian smoothing. The newly developed synthesis approach provides a clear anatomically motivated modeling contribution through the specific three component transformation model, and clearly shows a performance improvement (in terms of anatomical meaningful correspondences) on 146 CT images of femurs compared to a standard multiresolution demons. In addition, this simple model improves the robustness of the demons while preserving its accuracy. The ground truth are manual measurements performed by medical experts.