Residual stress distribution in ferritic-austenitic steel joints made by laser welding

The present investigation addresse the influence of laser welding process-ing parameters used for joining dis-similar metals (ferritic to austenitic steel), on the induced residual stress field. Welding was performed on a Nd:YAG laser DY033 (3300 W) in a continuous wave (CW), keyhole mode. The base metals (BM) employed in this study are AISI 1010 carbon steel (CS) and AISI 304L austenitic stainless steel (SS). Pairs of dissimilar plates of 200 mm x 45 mm x 3 mm were butt joined by laser welding. Different sets of parameters were used to engineer the base metals apportionment at joint formation, namely distinct dilution rates. Residual strain scanning, carried out by neutron diffraction was used to assess the joints. Through-thickness residual stress maps were determined for the laser welded samples of dis-similar steels using high spatial reso-lution. As a result, an appropriate set of processing parameters, able to mi-nimize the local tensile residual stress associated to the welding process, was found.

Residual stress distribution in ferritic to austenitic steel joints made by laser welding,

In this study, autogenous laser welding was used to join thin plates of low carbon ferritic and austenitic stainless steel. Due to the differences in the thermo-physical properties of base metals, this kind of weld exhibits a complex microstructure, which frequently leads to an overall loss of joint quality. Four welded samples were prepared by using different sets of processing parameters, with the aim of minimizing the induced residual stress field. The dissimilar austenitic-ferritic joints obtained under all welding conditions were uniform and free of defects. Variations in beam position did not influence the weld geometiy, which is a typical keyhole welding. Microstructural characterization and residual strain scanning (by neutron diffraction) were used to assess the features of the joints. By varying laser beam power density and by displacing the laser beam towards the carbon steel side, an optimum combination of processing parameters was found.

Overall vs. local mechanical behaviour of ferritic austenitic steel joints made by laser welding

The present investigation addresses the overall and local mechanical performance of dissimilar joints of low carbon steel (CS) and stainless Steel (SS) thin sheets achieved by laser welding in case of heat source displacement from the weld gap centreline towards CS. Welding was performed on a Nd:YAG laser DY033 (3300 W) in a continuos wave (CW), keyhole mode. The tensile behavior of the joint different zones assessed by using a video-image based system (VIC-2D) reveals that the residual stress field, together with the positive difference in yield between the weld metal and the base materials protects the joint from being plastically deformed. The tensile loadings of flat transverse specimens generate the strain localization and failure in CS, far away from the weld.

Shell size, body mass and average pO2 in mantle cavity water of different marine mollusc species

Marine invertebrates with open circulatory system establish low and constant oxygen partial pressure (Po2) around their tissues. We hypothesized that as a first step towards maintenance of low haemolymph and tissue oxygenation, the Po2 in molluscan mantle cavity water should be lowered against normoxic (21 kPa) seawater Po2, but balanced high enough to meet the energetic requirements in a given species. We recorded Po2 in mantle cavity water of five molluscan species with different lifestyles, two pectinids (Aequipecten opercularis, Pecten maximus), two mud clams (Arctica islandica, Mya arenaria), and a limpet (Patella vulgata). All species maintain mantle cavity water oxygenation below normoxic Po2. Average mantle cavity water Po2 correlates positively with standard metabolic rate (SMR): highest in scallops and lowest in mud clams. Scallops show typical Po2 frequency distribution, with peaks between 3 and 10 kPa, whereas mud clams and limpets maintain mantle water Po2 mostly <5 kPa. Only A. islandica and P. vulgata display distinguishable temporal patterns in Po2 time series. Adjustment of mantle cavity Po2 to lower than ambient levels through controlled pumping prevents high oxygen gradients between bivalve tissues and surrounding fluid, limiting oxygen flux across the body surface. The patterns of Po2 in mantle cavity water correspond to molluscan ecotypes.

An optical fiber Bragg grating tactile sensor

Tactile sensors are needed for many emerging robotic and telepresence applications such as keyhole surgery and robot operation in unstructured environments. We have proposed and demonstrated a tactile sensor consisting of a fibre Bragg grating embedded in a polymer "finger". When the sensor is placed in contact with a surface and translated tangentially across it measurements on the changes in the reflectivity spectrum of the grating provide a measurement of the spatial distribution of forces perpendicular to the surface and thus, through the elasticity of the polymer material, to the surface roughness. Using a sensor fabricated from a Poly Siloxane polymer (Methyl Vinyl Silicone rubber) spherical cap 50 mm in diameter, 6 mm deep with an embedded 10 mm long Bragg grating we have characterised the first and second moment of the grating spectral response when scanned across triangular and semicircular periodic structures both with a modulation depth of 1 mm and a period of 2 mm. The results clearly distinguish the periodicity of the surface structure and the differences between the two different surface profiles. For the triangular structure a central wavelength modulation of 4 pm is observed and includes a fourth harmonic component, the spectral width is modulated by 25 pm. Although crude in comparison to human senses these results clearly shown the potential of such a sensor for tactile imaging and we expect that with further development in optimising both the grating and polymer "finger" properties a much increased sensitivity and spatial resolution is achievable.

Seawater carbonate chemistry and biological processes during experiments with Patella vulgata, 2010

The effect of short-term (5 days) exposure to CO2-acidified seawater (year 2100 predicted values, ocean pH = 7.6) on key aspects of the function of the intertidal common limpet Patella vulgata (Gastropoda: Patellidae) was investigated. Changes in extracellular acid-base balance were almost completely compensated by an increase in bicarbonate ions. A concomitant increase in haemolymph Ca2+ and visible shell dissolution implicated passive shell dissolution as the bicarbonate source. Analysis of the radula using SEM revealed that individuals from the hypercapnic treatment showed an increase in the number of damaged teeth and the extent to which such teeth were damaged compared with controls. As radula teeth are composed mainly of chitin, acid dissolution seems unlikely, and so the proximate cause of damage is unknown. There was no hypercapnia-related change in metabolism (O2 uptake) or feeding rate, also discounting the possibility that teeth damage was a result of a CO2-related increase in grazing. We conclude that although the limpet appears to have the physiological capacity to maintain its extracellular acid-base balance, metabolism and feeding rate over a 5 days exposure to acidified seawater, radular damage somehow incurred during this time could still compromise feeding in the longer term, in turn decreasing the top-down ecosystem control that P. vulgata exerts over rocky shore environments.

Temporal differences across a bio-geographical boundary reveal slow response of sub-littoral benthos to climate change

The English Channel is located at the biogeographical boundary between the northern Boreal and southern Lusitanian biozones and therefore represents an important area to study the effects of global warming on marine organisms. While the consequences of climatic change in the western English Channel have been relatively well documented for fish, plankton and inter-tidal benthic communities, data highlighting the same effects on the distribution of sub-littoral benthic organisms does, to date, not exist. The present study resurveyed a subset of sites originally surveyed from 1958 to 1959 along the UK coast of the English Channel. The main aims of this resurvey were to describe the present status of benthic communities and to investigate potential temporal changes, in particular distributional changes in western stenothermal ‘cold’ water and southern Lusitanian ‘warm’ water species. The increase in water temperature observed since the historic survey was predicted to have caused a contraction in the distribution of cold water species and an extension in the distribution of warm water species. The temporal comparison did not show any clear broad-scale distributional changes in benthic communities consistent with these predictions. Nevertheless, 2 warm water species, the sting winkle Ocenebra erinacea and the introduced American slipper limpet Crepidula fornicata, did show range extensions and increased occurrence, possibly related to climatic warming. Similarly, warm water species previously not recorded by the historic survey were found. The absence of broad-scale temporal differences in sub-tidal communities in response to climatic warming has been reported for other areas and may indicate that these communities respond far more slowly to environmental changes compared to plankton, fish and inter-tidal organisms.

Temporal differences across a bio-geographical boundary reveal slow response of sub-littoral benthos to climate change

The English Channel is located at the biogeographical boundary between the northern Boreal and southern Lusitanian biozones and therefore represents an important area to study the effects of global warming on marine organisms. While the consequences of climatic change in the western English Channel have been relatively well documented for fish, plankton and inter-tidal benthic communities, data highlighting the same effects on the distribution of sub-littoral benthic organisms does, to date, not exist. The present study resurveyed a subset of sites originally surveyed from 1958 to 1959 along the UK coast of the English Channel. The main aims of this resurvey were to describe the present status of benthic communities and to investigate potential temporal changes, in particular distributional changes in western stenothermal ‘cold’ water and southern Lusitanian ‘warm’ water species. The increase in water temperature observed since the historic survey was predicted to have caused a contraction in the distribution of cold water species and an extension in the distribution of warm water species. The temporal comparison did not show any clear broad-scale distributional changes in benthic communities consistent with these predictions. Nevertheless, 2 warm water species, the sting winkle Ocenebra erinacea and the introduced American slipper limpet Crepidula fornicata, did show range extensions and increased occurrence, possibly related to climatic warming. Similarly, warm water species previously not recorded by the historic survey were found. The absence of broad-scale temporal differences in sub-tidal communities in response to climatic warming has been reported for other areas and may indicate that these communities respond far more slowly to environmental changes compared to plankton, fish and inter-tidal organisms.

The influence of simulated exploitation onPatella vulgatapopulations: protandric sex change is size-dependent

Grazing mollusks are used as a food resource worldwide, and limpets are harvested commercially for both local consumption and export in several countries. This study describes a field experiment to assess the effects of simulated human exploitation of limpets Patella vulgata on their population ecology in terms of protandry (age-related sex change from male to female), growth, recruitment, migration, and density regulation. Limpet populations at two locations in southwest England were artificially exploited by systematic removal of the largest individuals for 18 months in plots assigned to three treatments at each site: no (control), low, and high exploitation. The shell size at sex change (L50: the size at which there is a 50:50 sex ratio) decreased in response to the exploitation treatments, as did the mean shell size of sexual stages. Size-dependent sex change was indicated by L50 occurring at smaller sizes in treatments than controls, suggesting an earlier switch to females. Mean shell size of P. vulgata neuters changed little under different levels of exploitation, while males and females both decreased markedly in size with exploitation. No differences were detected in the relative abundances of sexual stages, indicating some compensation for the removal of the bigger individuals via recruitment and sex change as no migratory patterns were detected between treatments. At the end of the experiment, 0–15 mm recruits were more abundant at one of the locations but no differences were detected between treatments. We conclude that sex change in P. vulgata can be induced at smaller sizes by reductions in density of the largest individuals reducing interage class competition. Knowledge of sex-change adaptation in exploited limpet populations should underpin strategies to counteract population decline and improve rocky shore conservation and resource management.

The influence of simulated exploitation onPatella vulgatapopulations: protandric sex change is size-dependent

Grazing mollusks are used as a food resource worldwide, and limpets are harvested commercially for both local consumption and export in several countries. This study describes a field experiment to assess the effects of simulated human exploitation of limpets Patella vulgata on their population ecology in terms of protandry (age-related sex change from male to female), growth, recruitment, migration, and density regulation. Limpet populations at two locations in southwest England were artificially exploited by systematic removal of the largest individuals for 18 months in plots assigned to three treatments at each site: no (control), low, and high exploitation. The shell size at sex change (L50: the size at which there is a 50:50 sex ratio) decreased in response to the exploitation treatments, as did the mean shell size of sexual stages. Size-dependent sex change was indicated by L50 occurring at smaller sizes in treatments than controls, suggesting an earlier switch to females. Mean shell size of P. vulgata neuters changed little under different levels of exploitation, while males and females both decreased markedly in size with exploitation. No differences were detected in the relative abundances of sexual stages, indicating some compensation for the removal of the bigger individuals via recruitment and sex change as no migratory patterns were detected between treatments. At the end of the experiment, 0–15 mm recruits were more abundant at one of the locations but no differences were detected between treatments. We conclude that sex change in P. vulgata can be induced at smaller sizes by reductions in density of the largest individuals reducing interage class competition. Knowledge of sex-change adaptation in exploited limpet populations should underpin strategies to counteract population decline and improve rocky shore conservation and resource management.