Cost and performance analysis of new wood-fuelled power plant concepts

The objective of the thesis was to analyse several process configurations for the production of electricity from biomass. Process simulation models using AspenPlus aimed at calculating the industrial performance of power plant concepts were built, tested, and used for analysis. The criteria used in analysis were performance and cost. All of the advanced systems appear to have higher efficiencies than the commercial reference, the Rankine cycle. However, advanced systems typically have a higher cost of electricity (COE) than the Rankine power plant. High efficiencies do not reduce fuel costs enough to compensate for the high capital costs of advanced concepts. The successful reduction of capital costs would appear to be the key to the introduction of the new systems. Capital costs account for a considerable, often dominant, part of the cost of electricity in these concepts. All of the systems have higher specific investment costs than the conventional industrial alternative, i.e. the Rankine power plant; Combined beat and power production (CUP) is currently the only industrial area of application in which bio-power costs can be considerably reduced to make them competitive. Based on the results of this work, AsperiPlus is an appropriate simulation platform. How-ever, the usefulness of the models could be improved if a number of unit operations were modelled in greater detail. The dryer, gasifier, fast pyrolysis, gas engine and gas turbine models could be improved.

Integrated assessment of bioelectricity technology options

Power generation from biomass is a sustainable energy technology which can contribute to substantial reductions in greenhouse gas emissions, but with greater potential for environmental, economic and social impacts than most other renewable energy technologies. It is important therefore in assessing bioenergy systems to take account of not only technical, but also environmental, economic and social parameters on a common basis. This work addresses the challenge of analysing, quantifying and comparing these factors for bioenergy power generation systems. A life-cycle approach is used to analyse the technical, environmental, economic and social impacts of entire bioelectricity systems, with a number of life-cycle indicators as outputs to facilitate cross-comparison. The results show that similar greenhouse gas savings are achieved with the wide variety of technologies and scales studied, but land-use efficiency of greenhouse gas savings and specific airborne emissions varied substantially. Also, while specific investment costs and electricity costs vary substantially from one system to another the number of jobs created per unit of electricity delivered remains roughly constant. Recorded views of stakeholders illustrate that diverging priorities exist for different stakeholder groups and this will influence appropriate choice of bioenergy systems for different applications.

Custos da gestão da qualidade na manutenção e sustentação dos Sistemas de Armas da Força Aérea

Atualmente, as organizações tendem a desenvolverem-se com o objetivo de se tornarem mais eficazes e eficientes. Neste contexto, esta investigação visa propor um modelo que permita calcular os Custos da Qualidade (CQ) na manutenção e sustentação dos Sistemas de Armas da Força Aérea (FA), contribuindo para a melhoria contínua do Sistema de Gestão da Qualidade e Aeronavegabilidade (SGQA). Assim, neste estudo é avaliada a utilização do modelo “Prevenção, Avaliação e Falhas” (PAF) para o cálculo dos CQ no SGQA, a forma como os Sistemas de Informação (SI) podem contribuir para este cálculo e qual a estrutura do sistema que deverá integrar e operacionalizar este modelo. Esta investigação desenvolve-se mediante um raciocínio hipotético-dedutivo, utilizando uma estratégia qualitativa aplicada num estudo de caso ao SA Epsilon Tb-30. Após apresentar um enquadramento teórico, são testadas as hipóteses identificadas através de análise documental e entrevistas a elementos com funções-chave neste âmbito. Verifica-se então a possibilidade de utilizar o modelo PAF para o cálculo dos CQ no SGQA. Contudo, é necessário adaptar os SI e os processos do sistema para a sua operacionalização. Finalmente, é proposto um plano para implementação do modelo de CQ, assim como são apresentadas algumas recomendações para o seu desenvolvimento. Abstract: Nowadays, the organizations tend to self-develop in order to increase their efficiency and effectiveness. In this context, this study has the purpose to propose a Quality Cost (CQ) model within the scope of maintenance and sustainability of Portuguese Air Force (FA) weapon systems, contributing to the continuous improvement of its Airworthiness and Quality Management System (SGQA). Therefore, throughout this study is evaluated the implementation of Prevention, Appraisal and Failure (PAF) model for CQ calculation, how the Information Systems (SI) can contribute for this calculus and what SGQA structure should integrate and operationalize this model. In this investigation is used a hypothetical-deductive reasoning, through a qualitative strategy applied to a case study in Epsilon TB-30 aircraft. After presenting an initial theoretical study, the raised hypotheses are tested through the relevant document analysis and interviews with elements in key functions within this scope. With this study it’s shown the possibility to use PAF model to calculate CQ of the SGQA. However, it’s necessary to adapt the SI and the system processes to get the operationalization of this model. Finally, an implementation plan of the evaluated CQ model is proposed, and some recommendations are made for its future development.

Huambo Microbiology Laboratory : economical and financial viability

Mestrado em Finanças

Sviluppo e applicazione di un reattore di prepolimerizzazione in continuo

Presso lo stabilimento DOW di Correggio (che è una system house per la produzione di prepolimeri poliuretanici) la ricerca è attualmente incentrata sullo sviluppo su scala industriale di un reattore pilota continuo di tipo plug flow che andrà a sostituire i tradizionali processi BATCH, con un guadagno in termini di sicurezza e costi di investimento. In particolare, il progetto prevedeva di sperimentare le “ricette” attuali di prepolimeri per applicazioni nel settore della calzatura per valutarne l’equivalenza con quelli fatti in BATCH, e di calibrare un modello del reattore pilota che permetta di prevedere le prestazioni del reattore e supporti lo scale-up attraverso la raccolta di dati sperimentali (profili di temperatura, tempi di residenza, titolo di NCO del prodotto, ecc...). Alla conclusione del progetto è possibile affermare che la tecnologia è robusta, scalabile e rispetto ai sistemi di produzione attuale presenta una maggiore produttività, sicurezza e minori costi di investimento. At the DOW plant in Correggio, which is a system house for the production of polyurethane prepolymers, the research is currently focused on the develompment and application of a plug flow type continuos reactor that will replace the traditional BATCH processes, with advantages in terms of process safety an investment costs. In particular, the project aims were to test in the pilot plant the prepolymer receipts for footwear application, find out if the result products were similar or better than the ones made with BATCH reactor and harvest experimental data (such as temperatures profiles, reaction time, residual NCO value, etc...) in order to calibrate a model that will support the scale-up to the industrial plant. Now that the project is ended, it is possibile to assert that this tecnology is reliable, scalable, safer and cheaper than the old processes.

Double Dyke System - Natural engineering solutions

According to various studies, the effects of climate change will be a danger to ecosystems and the population, especially in coastal areas, increasing the risk of floods. Authorities are taking action to prevent future disasters using traditional engineering solutions. These solutions can have high environmental and economic costs, fixing the coastline, increasing the salinization of aquifers, and can be subject to failure mechanisms. For this reason, studies were made to use natural engineering solutions for coastal protection, instead of traditional solutions, to achieve the UN SDGs. Coastal ecosystems have the natural ability to repair and restore themselves, increasing soil elevation, and attenuating waves. One of these solutions is the Double Dyke System, consisting of creating a salt marsh between the first dyke and a second inland. The goal is to protect the coasts and to restore ecosystems. The purpose of this study is to compare the costs of natural engineering solutions with traditional ones. It is assumed that these solutions may be more effective and less expensive in the long run. For this evaluation, a suitability analysis of the polders in the Dutch Zeeland region to assess the costs and benefits under different SLR scenarios was made. A saline intrusion model was also created to analyze the effects of a salt marsh on the aquifers. From the analyzes conducted, the implementation of the DDS turns out to be the cheapest coastal defense system in all SLR scenarios. The presence of a salt marsh could also have a positive impact on the prevention of saline intrusion in the various scenarios considered. The DDS could have a positive economic and environmental impact in the long term, reducing the investment costs for coastal defense and bringing important benefits for the protection of man and nature. Despite the results, more studies are needed on the efficiency of this defense system and on the economic evaluation of non-marketable ecosystem services.

Transaction costs: an empirical analysis of their relationship with investment and foreign direct investment

As stated by the New Institutional Economics theory, transaction costs play a relevant role in economics and, according to the extent of such costs, agents make investment decisions. Actually, transaction costs may represent a disincentive to entrepreneurship. This work aims to verify whether transaction costs are related to investment rate and foreign direct investment rate (FDI) in different business environments. The results suggest that foreign investors do not have precise information about other countries as domestic investors do; as it is observed, only the relation between transaction costs and investment rate is significant. Furthermore, there is evidence that the business environments of BRIC countries are less developed when compared to business environments of other countries in the study

Investment in preventing and preparing for biological emergencies and disasters: social and economic costs of disasters versus costs of surveillance and response preparedness

Biological emergencies such as the appearance of an exotic transboundary or emerging disease can become disasters. The question that faces Veterinary Services in developing countries is how to balance resources dedicated to active insurance measures, such as border control, surveillance, working with the governments of developing countries, and investing in improving veterinary knowledge and tools, with passive measures, such as contingency funds and vaccine banks. There is strong evidence that the animal health situation in developed countries has improved and is relatively stable. In addition, through trade with other countries, developing countries are becoming part of the international animal health system, the status of which is improving, though with occasional setbacks. However, despite these improvements, the risk of a possible biological disaster still remains, and has increased in recent times because of the threat of bioterrorism. This paper suggests that a model that combines decision tree analysis with epidemiology is required to identify critical points in food chains that should be strengthened to reduce the risk of emergencies and prevent emergencies from becoming disasters.

Administrative costs of regulation and foreign direct investment: evidence from Standard Cost Model implementation in non-OECD countries

In recent years both developed and developing countries have experienced an increasing number of government initiatives dedicated to reducing the administrative costs (AC) imposed on businesses by regulation. We use a bi-linear fixed-effects model to analyze the extent to which government initiatives to reduce AC through the Standard Cost Model (SCM) attract Foreign Direct Investment (FDI) among 32 developing countries. Controlling for standard determinants of the SCM, we find that the SCM in most cases leads to higher FDI and that the benefits are more significant where the SCM has been implemented for a longer period.

Lumpiness, capital adjustment costs and investment dynamics

Aggregate investment in the US economy displays a hump-shaped pattern in response to shocks, and the autocorrelation of aggregate investment growth is positive for the first few quarters, turning negative for the later quarters. This paper shows that this feature of the data is the natural outcome of a two-sector consumption/investment model designed and calibrated to reproduce plant-level evidence on capita: accumulation. (C) 2012 Elsevier B.V. All rights reserved.

The Costs and benefits of foreign investment from a state perspective /

"August 1982."

Analysis of investment fee savings and transition costs due to potential consolidation into Illinois Public Employees Retirement System (ILPERS) /

"May 2009"