199 resultados para interxylary meristem
Resumo:
A eficiência da técnica de cultura de anteras, em escala comercial, ainda pode ser considerada baixa quando medida em número de plantas duplo-haplóides férteis obtidas para cada antera estabelecida in vitro. Dessa forma, o presente trabalho é pioneiro no estudo detalhado da embriogênese in vitro do micrósporo e do grão de pólen de cevada (Hordeum vulgare L. ssp. vulgare). Com o objetivo de contribuir para o aperfeiçoamento da técnica de cultura de anteras foi analisada a embriogênese, com especial ênfase na etapa da indução, através de análises citológicas e histológicas de anteras cultivadas in vitro. Foram analisadas uma cultivar brasileira de cevada, em comparação com linhagens de duas outras cultivares brasileiras, que foram selecionadas, por seleção divergente para maior ou para menor resposta na indução da rota embriogênica e, respectivamente, para menor ou para maior capacidade de regenerar plântulas verdes. Somente foram estabelecidas em cultivo in vitro as anteras que apresentaram micrósporos e pólens jovens, das linhagens selecionadas da cultivar A-05 (S3A22 e S3A23), e da cultivar BR-2(S3B63 e, apenas na cultura de anteras, S3B61), bem como da cultivar MN-599 (nãoselecionada). Para as análises histológicas, foram fixadas, a cada dois dias, duas anteras, correspondentes a cada fileira da mesma espiga, após o início do cultivo in vitro. As anteras em cultivo e respectivas estruturas multicelulares foram fixadas em FAA 50%, desidratadas em série etílica e incluídas em hidroxietilmetacrilato. Os blocos de resina polimerizada foram secionados longitudinalmente com 3 mm de espessura. Para as análises citológicas foram fixadas, de cada espiga recém-coletada, três espiguetas sendo uma da base, outra do meio e outra do ápice. Após o pré-tratamento à baixa temperatura (5 °C), porém antes do cultivo in vitro, foram fixadas três anteras (amostras utilizadas como controles). A cada três dias, durante o cultivo, três anteras foram fixadas (até 18 dias). As anteras em cultivo e estruturas multicelulares foram fixadas em Farmer e FAA 50%, transferidas após 24 horas para etanol 70%. Na cultura in vitro das anteras houve diferenças entre uma das linhagens da cultivar A-05 em relação a cultivar MN- 599, na produção inicial de estruturas embriogênicas, diferença que desapareceu na produção total. Entretanto, houve diferenças na formação dos xiii embriões: a cv.MN-599 formou embriões bem diferenciados ao passo que a linhagem S3A22 produziu um número aparentemente menor, sendo que os embriões não eram bem diferenciados. A linhagem S3B63 não apresentou embriões até o final da análise histológica. Considerando que a amostra dessa linhagem, mantida em cultura, formou plantas verdes, pode-se propor que a formação de embriões deve ocorrer posteriormente ao desenvolvimento da cv.MN-599. Cabe destacar que houve diferenças significativas entre as cultivares A-05 e BR-2 quanto à regeneração de plântulas verdes. Esses resultados indicam ter havido maior eficiência da seleção em relação à etapa da regeneração. Com relação às categorias classificatórias dos micrósporos e grãos de pólen, constatou-se que desde o início da análise histológica (2o dia de cultivo in vitro) até o final (34o dia), foram observados micrósporos, o mesmo tendo sido observado na análise citológica. Os grãos de pólen multinucleados ocorreram praticamente em todo o período de cultivo in vitro, em ambas análises; não ocorrendo nos controles da citologia (antes do cultivo); os multinucleados foram observados a partir do 3o dia, enquanto que os multicelulares a partir do 4o dia de cultivo. As estruturas multicelulares foram observadas a partir do 8o dia. A quantidade e o tamanho das estruturas multicelulares foram variáveis ao longo da análise histológica, sendo que do 14o ao 20o dia foram encontradas as de maiores dimensões, resultantes da proliferação celular por mitoses sucessivas. A partir do 22o dia (cultivar MN- 599), a ocorrência de estruturas multicelulares no interior dos lóculos da antera diminuiu, predominando o processo de proliferação externo às anteras. Para as linhagens, a partir do 18o dia foram observadas estruturas multicelulares liberadas das anteras. A análise das estruturas multicelulares permitiu classificá-las em quatro categorias: 1. SFD: Sem forma definida; 2. MAC: meristema apical caulinar; 3. MAR: meristema apical radical embrionário adventício; e 4. Embriões. As estruturas amorfas apareceram em maior número, quando comparadas com as outras categorias. Em síntese: as linhagens selecionadas e a cultivar diferiram não apenas no tempo necessário para a formação dos embriões, mas também no desenvolvimento dos mesmos, que foi mais diferenciado na cultivar MN-599, porém sendo observados mais cedo na linhagem S3A22 e S3A23, do que na cultivar MN-599.
Resumo:
In this work, we used sugarcane as a model due to its importance for sugar and ethanol production. Unlike the current plant models, sugarcane presents a complex genetics and an enormous allelic variation. Here, we report the analysis of SAGE libraries produced using the shoot apical meristem from contrasted genotypes by flowering induction (non-flowering vs. early-flowering varieties) grown under São Paulo state conditions. The expression pattern was analyzed using samples from São Paulo (SP) and Rio Grande do Norte (RN) states. These results showed that cDNAs identified by SAGE libraries had differential expression only in São Paulo state samples. Furthermore, the cDNA identified CYP (Citocrome P450) was chosen for in silico and genome characterization because it was found in SAGE libraries and subtractive libraries from samples from RN. Phylogenetic trees showed the relationship for these sequences. Furthermore, the qRT-PCR for CYP showed a potential role as flowering indutor for RN samples considering different isophorms. Considering the results present here, it can be consider that CYP gene may be used as molecular marker
Resumo:
Flowering is a fundamental process in the life cycle for plant. This process is marked by vegetative to reproductive apical meristem conversion, due to interactions between several factors, both internal and external to plant. Therefore, eight subtractive libraries were constructed using apical meristem induced or not induced for two contrasting species: Solanum lycopersicum cv. Micro-Tom and Solanum pimpinellifolium. Several cDNAs were identified and among these, were selected two cDNAs: one homologous cDNA to cyclophilin (LeCYP1) and the other to Auxin repressed protein (ARP). It has observed that LeCYP1 and ARP genes are important in the developmental process to plants. In silico analysis, were used several databases with the exclusion criterion E-value <1.0x10-15. As a result, conservation was observed for proteins analyzed by means of multiple alignments and the presence of functional domains. Then, overexpression cassettes were constructed for the ARP cDNA in sense and antisense orientations. For this step, it was used the CaMV35S promoter. The cDNA orientation (sense or antisense) in relation to the promoter was determined by restriction enzymes and sequencing. Then, this cassette was transferred to binary vector pZP211 and these cassettes were transferred into Agrobacterium tumefaciens LBA4404. S. lycopersicum cv. Micro-Tom (MT) and MT-Rg1 plants were transformed. In addition, seedlings were subjected to hormone treatments using a synthetic auxin (- naphthalene acetic acid) and cyclosporin A (cyclophilin inhibitor) treatments and it was found that the hormone treatment there were changes in development of lateral roots pattern, probably related to decreases in auxin signaling caused by reduction of LeCYP1 in MT-dgt plants while cyclosporin A treatments, there was a slight delay in flowering in cv. MT plants. Furthermore, assay with real-time PCR (RT-qPCR) were done for expression level analysis from LeCYP1 and ARP in order to functionally characterize these sequences in tomato plants.
Resumo:
The flowering is a physiological process that it is vital for plants. This physiological process has been well studied in the plant model Arabidopsis, but in sugarcane this process is not well known. The transition of the shoot apical meristem from vegetative to flowering is a critical factor for plant development. At Brazil northeastern region, the transition to flowering in sugarcane has an important effect as it may reduce up to 60% its production. This is a consequence of the sugar translocation from stalks to the shoot apical meristem which is necessary during the flowering process. Therefore, the aim of this work was to explore and analyze cDNAs previously identified using subtractive cDNA libraries. The results showed that these cDNAs showed differential expression profile in varieties of sugarcane (early x late flowering). The in silico analysis suggested that these cDNAs had homology to calmodulin, NAC transcription factor and phosphatidylinositol, a SEC14, which were described in the literature as having a role in the process of floral development. To better understand the role of the cDNA homologous to calmodulin, tobacco plants were transformed with overexpression cassettes in sense and antissense orientation. Plants overexpressing the cassette in sense orientation did not flowered, while plants overexpressing the cassette in the antissense orientation produced flowers. The data obtained in this study suggested the possible role from CAM sequence, SEC14 and NAC in the induction/floral development pathway in sugarcane, this is the first study in order to analyze these genes in the sugarcane flowering process.
Resumo:
Com a finalidade de se testar a viabilidade do método de microenxertia para produzir mudas de mangueira livres do fungo Fusarium subglutinans, agente causal da malformação, foram realizados experimentos utilizando-se do ápice meristemático da cultivar Tommy Atkins. Retirou-se o ápice meristemático do porta-enxerto e colocou-se o ápice meristemático da cultivar-copa, denominando-se essa metodologia de microenxertia por substituição de ápice meristemático, na qual foram utilizadas as cultivares Coquinho, Espada, Ouro e Ubá como porta-enxertos. O material de propagação utilizado foi retirado de uma planta-matriz da cultivar Tommy Atkins sem sintomas de malformação. Primeiramente, a parte apical dos ramos foi cortada com aproximadamente 3 cm de comprimento. Os meristemas foram colocados em uma solução antioxidante composta de ácido ascórbico, ácido cítrico e L-cisteína, para evitar a oxidação dos compostos fenólicos existentes na manga. Os meristemas apicais foram cortados com comprimento de 2 mm. em seguida, efetuou-se o corte do meristema apical e de folhas do porta-enxerto, colocando-se o meristema apical sobre o corte do porta-enxerto, recobrindo-se com Parafilm®. Demonstrou-se com a técnica de microenxertia a possibilidade de formação de plantas-matrizes, para implantação de jardim clonal em condições de viveiro protegido.
Resumo:
Flowering is a process marked by switch of shoot apical meristem to floral meristem, and it involves a complex regulation by endogenous and environmental factors. Analyses of key flowering genes have been carried out primarily in Arabidopsis thaliana and have provided a foundation for understanding the underlying molecular genetic mechanisms controlling different aspects of floral development. Several homologous have been found in other species, but for crops species such as tomatoes this process is not well known. The aim of this work was to use the genetic natural variation associated to the flowering process and use molecular tools such as subtractive libraries and real time PCR in order to identify and analyze the expression from genes that may be associated to flowering in these two species: L. esculentum cv Micro-Tom and L. pimpinellifolium. Our results showed there were identified many genes related to vegetative and possibly to the flowering process. There were also identified many sequences that were unknown. We ve chosen three genes to analyze the expression by real time PCR. The histone H2A gene gave an expression higher in L. pimpinellifolium, due to this the expression of this gene may be associated to flowering in this specie. It was also analyzed the expression of an unknown gene that might be a key factor of the transition to flowering, also in L. pimpinellifolium. For the elongation factor 1-α expression, the expression results were not informative, so this gene may have a constitutive expression in vegetative and flowering state. The results observed allowed us to identify possible genes that may be related to the flowering process. For further results it will be necessary a better characterization of them.
Resumo:
Sugarcane is one of the most important products of the world and Brazil is responsible for 25 % of the world production. One problem of this culture at northeast of Brazil is the early flowering. In our laboratory, it has been made before four subtractive libraries using early and late flowering genotypes in order to identify messages related to the flowering process. In this work, two cDNAs were chosen to make in silico analysis and overexpression constructs. Another approach to understand the flowering process in sugarcane was to use proteomic tools. First, the protocol for protein extraction using apical meristem was set up. After that, these proteins were separated on two bidimensional gels. It was possible to observe some difference for some regions of these gels as well as some proteins that can be found in all conditions. The next step, spots will be isolated and sequence on MS spectrometry in order to understand this physiological process in sugarcane
Quantitative distribution of gibberellins and indole-acetic acid in pea (Pisum sativum L.) seedlings
Resumo:
The objective was to determine the distribution in pea seedling of GA (by thin layer chromatography) and IAA (by HPLC). Three samples of 30 7/day-old seedlings were sectioned into: apical meristem + plumular hook; stem elongation zone; stem non-elongation zone; cotyledons; root non-elongation zone; root tip. The material was frozen in liquid N and stored at -80 degrees C. The stem elongation zone, the apical meristem+plumular hook and the root tip had low IAA, whereas the stem non-elongation zone and root non-elongation zone had high IAA content. The stem elongation zone and apical meristem plumular hook had high GA, while root non-elongation zone had the lowest GA content.
Resumo:
Cell lysis in the formation of secretory cavities in plants has been questioned by some authors and considered as result of technical artifacts. To describe the formation of secretory resin cavities in Hymenaea stigonocarpa leaves, leaflet samples at different stages of differentiation were collected, fixed, and processed for light and electron microscopy as per usual methods. The initial cells of secretory resin cavities are protodermal and grow towards the mesophyll ground meristem; these cells then divide producing cell groups that are distinguished by the shape and arrangement of cytoplasm, and density. At the initial stages of differentiation of the secretory cavities, some central cells in these groups show dark cytoplasm and condensed nuclear chromatin. Later, there is cell wall loosening, tonoplast and plasmalemma rupture resulting in cell death. These cells, however, maintain organelle integrity until lysis, when the cell wall degrades and the plasmalemma ruptures, releasing protoplast residues, marked characteristics of programmed cell death. The secretory epithelium remains active until complete leaf expansion when the cavity is filled with resin and the secretory activity ceases. There are no wall residues between central cells in adult cavities. Our results demonstrate lysigeny and the importance of ontogenetic studies in determining the origin of secretory cavities.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)