Tuning remoto di filtering, pre-processing e buffering per scenari internet of things

La tesi propone una soluzione middleware per scenari in cui i sensori producono un numero elevato di dati che è necessario gestire ed elaborare attraverso operazioni di preprocessing, filtering e buffering al fine di migliorare l'efficienza di comunicazione e del consumo di banda nel rispetto di vincoli energetici e computazionali. E'possibile effettuare l'ottimizzazione di questi componenti attraverso operazioni di tuning remoto.

Internet of things e integrazione nel web: Web of things

Internet of Things (IoT): tre parole che sintetizzano al meglio come la tecnologia abbia pervaso quasi ogni ambito della nostra vita. In questa tesi andrò a esplorare le soluzioni hardware e soprattutto software che si celano dietro allo sviluppo di questa nuova frontiera tecnologica, dalla cui combinazione con il web nasce il Web of Things, ovvero una visione globale, accessibile da qualsiasi utente attraverso i comuni mezzi di navigazione, dei servizi che ogni singolo smart device può offrire. Sarà seguito un percorso bottom-up partendo dalla descrizione fisica dei device e delle tecnologie abilitanti alla comunicazione thing to thing ed i protocolli che instaurano fra i device le connessioni. Proseguendo per l’introduzione di concetti quali middleware e smart gateway, sarà illustrata l’integrazione nel web 2.0 di tali device menzionando durante il percorso quali saranno gli scenari applicativi e le prospettive di sviluppo auspicabili.

Virtualizzazione di funzioni di rete su piattaforme per cloud computing

Questo documento affronta le novità ed i vantaggi introdotti nel mondo delle reti di telecomunicazioni dai paradigmi di Software Defined Networking e Network Functions Virtualization, affrontandone prima gli aspetti teorici, per poi applicarne i concetti nella pratica, tramite casi di studio gradualmente più complessi. Tali innovazioni rappresentano un'evoluzione dell'architettura delle reti predisposte alla presenza di più utenti connessi alle risorse da esse offerte, trovando quindi applicazione soprattutto nell'emergente ambiente di Cloud Computing e realizzando in questo modo reti altamente dinamiche e programmabili, tramite la virtualizzazione dei servizi di rete richiesti per l'ottimizzazione dell'utilizzo di risorse. Motivo di tale lavoro è la ricerca di soluzioni ai problemi di staticità e dipendenza, dai fornitori dei nodi intermedi, della rete Internet, i maggiori ostacoli per lo sviluppo delle architetture Cloud. L'obiettivo principale dello studio presentato in questo documento è quello di valutare l'effettiva convenienza dell'applicazione di tali paradigmi nella creazione di reti, controllando in questo modo che le promesse di aumento di autonomia e dinamismo vengano rispettate. Tale scopo viene perseguito attraverso l'implementazione di entrambi i paradigmi SDN e NFV nelle sperimentazioni effettuate sulle reti di livello L2 ed L3 del modello OSI. Il risultato ottenuto da tali casi di studio è infine un'interessante conferma dei vantaggi presentati durante lo studio teorico delle innovazioni in analisi, rendendo esse una possibile soluzione futura alle problematiche attuali delle reti.

Studio di Augmented World come Paradigma di Progettazione di Sistemi basati su Realtà Aumentata e Pervasive Computing - Verso la Definizione di un Modello

L’obiettivo della tesi è definire un modello che permetta di realizzare applicazioni che integrino diverse tecnologie come la realtà aumentata, pervasive computing e Internet of Things. In particolare si analizza la nozione di "augmentation" che indica un’estensione e un arricchimento delle funzionalità e delle informazioni che possono essere percepite dai sensi umani e che può essere ritrovata, in modo diverso, nelle tecnologie trattate. A tal proposito, si introduce l’idea di augmented world, il cui scopo è quello di realizzare un livello aumentato collegato ad un livello fisico, attraverso il quale permettere l’interazione tra elementi virtuali ed elementi fisici. In seguito, tramite un'analisi tassonomica si vogliono individuare le caratteristiche ed i requisiti fondanti degli ambiti applicativi trattati per poter definire un modello che possa essere utilizzato come riferimento per le diverse tipologie di applicazioni. Infine il modello proposto è stato applicato a diversi casi di studio che spaziano tra i principali contesti applicativi in cui vengono utilizzate le tecnologie illustrate. La modellazione è fatta prescindendo da alcuni aspetti relativi alla comunicazione o alla sincronizzazione tra livello reale e livello aumentato, in quanto l’obiettivo è esporre una prima validazione del modello che permetta di riscontrarne l’adeguatezza ed eventuali limiti per una futura raffinazione.

Das Internet der Dinge unter dem Aspekt der Selbststeuerung-Ein Überblick

In den letzten Jahren wurde die Vision einer Welt smarter Alltagsgegenstände unter den Begriffen wie Ubiquitous Computing, Pervasive Computing und Ambient Intelligence in der Öffentlichkeit wahrgenommen. Die smarten Gegenstände sollen mit digitaler Logik, Sensorik und der Möglichkeit zur Vernetzung ausgestattet werden. Somit bilden sie ein „Internet der Dinge“, in dem der Computer als eigenständiges Gerät verschwindet und in den Objekten der physischen Welt aufgeht. Während auf der einen Seite die Vision des „Internet der Dinge“ durch die weiter anhaltenden Fortschritte in der Informatik, Mikroelektronik, Kommunikationstechnik und Materialwissenschaft zumindest aus technischer Sicht wahrscheinlich mittelfristig realisiert werden kann, müssen auf der anderen Seite die damit zusammenhängenden ökonomischen, rechtlichen und sozialen Fragen geklärt werden. Zur Weiterentwicklung und Realisierung der Vision des „Internet der Dinge“ wurde erstmals vom AutoID-Center das EPC-Konzept entwickelt, welches auf globale netzbasierte Informationsstandards setzt und heute von EPCglobal weiterentwickelt und umgesetzt wird. Der EPC erlaubt es, umfassende Produktinformationen über das Internet zur Verfügung zu stellen. Die RFID-Technologie stellt dabei die wichtigste Grundlage des „Internet der Dinge“ dar, da sie die Brücke zwischen der physischen Welt der Produkte und der virtuellen Welt der digitalen Daten schlägt. Die Objekte, die mit RFID-Transpondern ausgestattet sind, können miteinander kommunizieren und beispielsweise ihren Weg durch die Prozesskette finden. So können sie dann mit Hilfe der auf den RFID-Transpondern gespeicherten Informationen Förderanlagen oder sonstige Maschinen ohne menschliches Eingreifen selbstständig steuern.

Wearable Computing und RFID in Produktion und Logistik – Ansätze zur bereichsübergreifenden Nutzung digitaler Informationen

Die voranschreitende Entwicklung von Konzepten und Systemen zur Nutzung digitaler Informationen im industriellen Umfeld eröffnet verschiedenste Möglichkeiten zur Optimierung der Informationsverarbeitung und damit der Prozesseffektivität und -effizienz. Werden die relevanten Daten zu Produkten oder Prozessen jedoch lediglich in digitaler Form zur Verfügung gestellt, fällt ein Eingriff des Menschen in die virtuelle Welt immer schwerer. Auf Grundlage dessen wird am Beispiel der RFIDTechnologie dargestellt, inwiefern digitale Informationen durch die Verwendung von in den Arbeitsablauf integrierten Systemen für den Menschen nutzbar werden. Durch die Entwicklung eines Systems zur papierlosen Produktion und Logistik werden exemplarisch Einsatzszenarien zur Unterstützung des Mitarbeiters in Montageprozessen sowie zur Vermeidung von Fehlern in der Kommissionierung aufgezeigt. Dazu findet neben einer am Kopf getragenen Datenbrille zur Visualisierung der Informationen ein mobiles RFID-Lesegerät Anwendung, mit Hilfe dessen die digitalen Transponderdaten ohne zusätzlichen Aufwand für den Anwender genutzt werden können.

Cloud Computing in the EU Policy Sphere Interoperability, Vertical Integration and the Internal Market

Cloud computing is a new development that is based on the premise that data and applications are stored centrally and can be accessed through the Internet. Thisarticle sets up a broad analysis of how the emergence of clouds relates to European competition law, network regulation and electronic commerce regulation, which we relate to challenges for the further development of cloud services in Europe: interoperability and data portability between clouds; issues relating to vertical integration between clouds and Internet Service Providers; and potential problems for clouds to operate on the European Internal Market. We find that these issues are not adequately addressed across the legal frameworks that we analyse, and argue for further research into how to better facilitate innovative convergent services such as cloud computing through European policy – especially in light of the ambitious digital agenda that the European Commission has set out.

Global Standards: Recent Developments betweend the Poles of Privacy and Cloud Computing

The development of the Internet has made it possible to transfer data ‘around the globe at the click of a mouse’. Especially fresh business models such as cloud computing, the newest driver to illustrate the speed and breadth of the online environment, allow this data to be processed across national borders on a routine basis. A number of factors cause the Internet to blur the lines between public and private space: Firstly, globalization and the outsourcing of economic actors entrain an ever-growing exchange of personal data. Secondly, the security pressure in the name of the legitimate fight against terrorism opens the access to a significant amount of data for an increasing number of public authorities.And finally,the tools of the digital society accompany everyone at each stage of life by leaving permanent individual and borderless traces in both space and time. Therefore, calls from both the public and private sectors for an international legal framework for privacy and data protection have become louder. Companies such as Google and Facebook have also come under continuous pressure from governments and citizens to reform the use of data. Thus, Google was not alone in calling for the creation of ‘global privacystandards’. Efforts are underway to review established privacy foundation documents. There are similar efforts to look at standards in global approaches to privacy and data protection. The last remarkable steps were the Montreux Declaration, in which the privacycommissioners appealed to the United Nations ‘to prepare a binding legal instrument which clearly sets out in detail the rights to data protection and privacy as enforceable human rights’. This appeal was repeated in 2008 at the 30thinternational conference held in Strasbourg, at the 31stconference 2009 in Madrid and in 2010 at the 32ndconference in Jerusalem. In a globalized world, free data flow has become an everyday need. Thus, the aim of global harmonization should be that it doesn’t make any difference for data users or data subjects whether data processing takes place in one or in several countries. Concern has been expressed that data users might seek to avoid privacy controls by moving their operations to countries which have lower standards in their privacy laws or no such laws at all. To control that risk, some countries have implemented special controls into their domestic law. Again, such controls may interfere with the need for free international data flow. A formula has to be found to make sure that privacy at the international level does not prejudice this principle.

BitWorker, a Decentralized Distributed Computing System based on BitTorrent

In this paper we present BitWorker, a platform for community distributed computing based on BitTorrent. Any splittable task can be easily specified by a user in a meta-information task file, such that it can be downloaded and performed by other volunteers. Peers find each other using Distributed Hash Tables, download existing results, and compute missing ones. Unlike existing distributed computing schemes relying on centralized coordination point(s), our scheme is totally distributed, therefore, highly robust. We evaluate the performance of BitWorker using mathematical models and real tests, showing processing and robustness gains. BitWorker is available for download and use by the community.

Semantic middleware development for the Internet of Things

After the extraordinary spread of the World Wide Web during the last fifteen years, engineers and developers are pushing now the Internet to its next border. A new conception in computer science and networks communication has been burgeoning during roughly the last decade: a world where most of the computers of the future will be extremely downsized, to the point that they will look like dust at its most advanced prototypes. In this vision, every single element of our “real” world has an intelligent tag that carries all their relevant data, effectively mapping the “real” world into a “virtual” one, where all the electronically augmented objects are present, can interact among them and influence with their behaviour that of the other objects, or even the behaviour of a final human user. This is the vision of the Internet of the Future, which also draws ideas of several novel tendencies in computer science and networking, as pervasive computing and the Internet of Things. As it has happened before, materializing a new paradigm that changes the way entities interrelate in this new environment has proved to be a goal full of challenges in the way. Right now the situation is exciting, with a plethora of new developments, proposals and models sprouting every time, often in an uncoordinated, decentralised manner away from any standardization, resembling somehow the status quo of the first developments of advanced computer networking, back in the 60s and the 70s. Usually, a system designed after the Internet of the Future will consist of one or several final user devices attached to these final users, a network –often a Wireless Sensor Network- charged with the task of collecting data for the final user devices, and sometimes a base station sending the data for its further processing to less hardware-constrained computers. When implementing a system designed with the Internet of the Future as a pattern, issues, and more specifically, limitations, that must be faced are numerous: lack of standards for platforms and protocols, processing bottlenecks, low battery lifetime, etc. One of the main objectives of this project is presenting a functional model of how a system based on the paradigms linked to the Internet of the Future works, overcoming some of the difficulties that can be expected and showing a model for a middleware architecture specifically designed for a pervasive, ubiquitous system. This Final Degree Dissertation is divided into several parts. Beginning with an Introduction to the main topics and concepts of this new model, a State of the Art is offered so as to provide a technological background. After that, an example of a semantic and service-oriented middleware is shown; later, a system built by means of this semantic and service-oriented middleware, and other components, is developed, justifying its placement in a particular scenario, describing it and analysing the data obtained from it. Finally, the conclusions inferred from this system and future works that would be good to be tackled are mentioned as well. RESUMEN Tras el extraordinario desarrollo de la Web durante los últimos quince años, ingenieros y desarrolladores empujan Internet hacia su siguiente frontera. Una nueva concepción en la computación y la comunicación a través de las redes ha estado floreciendo durante la última década; un mundo donde la mayoría de los ordenadores del futuro serán extremadamente reducidas de tamaño, hasta el punto que parecerán polvo en sus más avanzado prototipos. En esta visión, cada uno de los elementos de nuestro mundo “real” tiene una etiqueta inteligente que porta sus datos relevantes, mapeando de manera efectiva el mundo “real” en uno “virtual”, donde todos los objetos electrónicamente aumentados están presentes, pueden interactuar entre ellos e influenciar con su comportamiento el de los otros, o incluso el comportamiento del usuario final humano. Ésta es la visión del Internet del Futuro, que también toma ideas de varias tendencias nuevas en las ciencias de la computación y las redes de ordenadores, como la computación omnipresente y el Internet de las Cosas. Como ha sucedido antes, materializar un nuevo paradigma que cambia la manera en que las entidades se interrelacionan en este nuevo entorno ha demostrado ser una meta llena de retos en el camino. Ahora mismo la situación es emocionante, con una plétora de nuevos desarrollos, propuestas y modelos brotando todo el rato, a menudo de una manera descoordinada y descentralizada lejos de cualquier estandarización, recordando de alguna manera el estado de cosas de los primeros desarrollos de redes de ordenadores avanzadas, allá por los años 60 y 70. Normalmente, un sistema diseñado con el Internet del futuro como modelo consistirá en uno o varios dispositivos para usuario final sujetos a estos usuarios finales, una red –a menudo, una red de sensores inalámbricos- encargada de recolectar datos para los dispositivos de usuario final, y a veces una estación base enviando los datos para su consiguiente procesado en ordenadores menos limitados en hardware. Al implementar un sistema diseñado con el Internet del futuro como patrón, los problemas, y más específicamente, las limitaciones que deben enfrentarse son numerosas: falta de estándares para plataformas y protocolos, cuellos de botella en el procesado, bajo tiempo de vida de las baterías, etc. Uno de los principales objetivos de este Proyecto Fin de Carrera es presentar un modelo funcional de cómo trabaja un sistema basado en los paradigmas relacionados al Internet del futuro, superando algunas de las dificultades que pueden esperarse y mostrando un modelo de una arquitectura middleware específicamente diseñado para un sistema omnipresente y ubicuo. Este Proyecto Fin de Carrera está dividido en varias partes. Empezando por una introducción a los principales temas y conceptos de este modelo, un estado del arte es ofrecido para proveer un trasfondo tecnológico. Después de eso, se muestra un ejemplo de middleware semántico orientado a servicios; después, se desarrolla un sistema construido por medio de este middleware semántico orientado a servicios, justificando su localización en un escenario particular, describiéndolo y analizando los datos obtenidos de él. Finalmente, las conclusiones extraídas de este sistema y las futuras tareas que sería bueno tratar también son mencionadas.

El Internet de las Cosas y los nuevos riesgos para la privacidad

Este trabajo consiste en la elaboración de un proyecto de investigación, orientado al estudio del Internet de las Cosas y los riesgos que presenta para la privacidad. En los últimos años se han puesto en marcha numerosos proyectos y se han realizado grandes avances tecnológicos con el fin de hacer del Internet de las Cosas una realidad, sin embargo aspectos críticos como la seguridad y la privacidad todavía no están completamente solucionados. El objetivo de este Trabajo Fin de Master es realizar un análisis en profundidad del Internet del Futuro, ampliando los conocimientos adquiridos durante el Máster, estudiando paso a paso los fundamentos sobre los que se asienta y reflexionando acerca de los retos a los que se enfrenta y el efecto que puede tener su implantación para la privacidad. El trabajo se compone de 14 capítulos estructurados en 4 partes. Una primera parte de introducción en la que se explican los conceptos del Internet de las Cosas y la computación ubicua, como preámbulo a las siguientes secciones. Posteriormente, en la segunda parte, se analizan los aspectos tecnológicos y relativos a la estandarización de esta nueva red. En la tercera parte se presentan los principales proyectos de investigación que existen actualmente y las diferentes áreas de aplicación que tiene el Internet del Futuro. Y por último, en la cuarta parte, se realiza un análisis del concepto de privacidad y se estudian, mediante diferentes escenarios de aplicación, los riesgos que puede suponer para la privacidad la implantación del Internet de las Cosas. This paper consists of the preparation of a research project aimed to study the Internet of Things and the risks it poses to privacy. In recent years many projects have been launched and new technologies have been developed to make the Internet of Things a reality; however, critical issues such as security and privacy are not yet completely solved. The purpose of this project is to make a rigorous analysis of the Future Internet, increasing the knowledge acquired during the Masters, studying step by step the basis on which the Internet of Things is founded, and reflecting on the challenges it faces and the effects it can have on privacy. The project consists of 14 chapters structured in four parts. The first part consists of an introduction which explains the concepts of the Internet of Things and ubiquitous computing as a preamble to the next parts. Then, in the second part, technological and standardization issues of this new network are studied. The third part presents the main research projects and Internet of Things application areas. And finally, the fourth part includes an analysis of the privacy concept and also an evaluation of the risks the Internet of Things poses to privacy. These are examined through various application scenarios.

Contribution to multiuser videoconferencing systems based on cloud computing

Multi-user videoconferencing systems offer communication between more than two users, who are able to interact through their webcams, microphones and other components. The use of these systems has been increased recently due to, on the one hand, improvements in Internet access, networks of companies, universities and houses, whose available bandwidth has been increased whilst the delay in sending and receiving packets has decreased. On the other hand, the advent of Rich Internet Applications (RIA) means that a large part of web application logic and control has started to be implemented on the web browsers. This has allowed developers to create web applications with a level of complexity comparable to traditional desktop applications, running on top of the Operating Systems. More recently the use of Cloud Computing systems has improved application scalability and involves a reduction in the price of backend systems. This offers the possibility of implementing web services on the Internet with no need to spend a lot of money when deploying infrastructures and resources, both hardware and software. Nevertheless there are not many initiatives that aim to implement videoconferencing systems taking advantage of Cloud systems. This dissertation proposes a set of techniques, interfaces and algorithms for the implementation of videoconferencing systems in public and private Cloud Computing infrastructures. The mechanisms proposed here are based on the implementation of a basic videoconferencing system that runs on the web browser without any previous installation requirements. To this end, the development of this thesis starts from a RIA application with current technologies that allow users to access their webcams and microphones from the browser, and to send captured data through their Internet connections. Furthermore interfaces have been implemented to allow end users to participate in videoconferencing rooms that are managed in different Cloud provider servers. To do so this dissertation starts from the results obtained from the previous techniques and backend resources were implemented in the Cloud. A traditional videoconferencing service which was implemented in the department was modified to meet typical Cloud Computing infrastructure requirements. This allowed us to validate whether Cloud Computing public infrastructures are suitable for the traffic generated by this kind of system. This analysis focused on the network level and processing capacity and stability of the Cloud Computing systems. In order to improve this validation several other general considerations were taken in order to cover more cases, such as multimedia data processing in the Cloud, as research activity has increased in this area in recent years. The last stage of this dissertation is the design of a new methodology to implement these kinds of applications in hybrid clouds reducing the cost of videoconferencing systems. Finally, this dissertation opens up a discussion about the conclusions obtained throughout this study, resulting in useful information from the different stages of the implementation of videoconferencing systems in Cloud Computing systems. RESUMEN Los sistemas de videoconferencia multiusuario permiten la comunicación entre más de dos usuarios que pueden interactuar a través de cámaras de video, micrófonos y otros elementos. En los últimos años el uso de estos sistemas se ha visto incrementado gracias, por un lado, a la mejora de las redes de acceso en las conexiones a Internet en empresas, universidades y viviendas, que han visto un aumento del ancho de banda disponible en dichas conexiones y una disminución en el retardo experimentado por los datos enviados y recibidos. Por otro lado también ayudó la aparación de las Aplicaciones Ricas de Internet (RIA) con las que gran parte de la lógica y del control de las aplicaciones web comenzó a ejecutarse en los mismos navegadores. Esto permitió a los desarrolladores la creación de aplicaciones web cuya complejidad podía compararse con la de las tradicionales aplicaciones de escritorio, ejecutadas directamente por los sistemas operativos. Más recientemente el uso de sistemas de Cloud Computing ha mejorado la escalabilidad y el abaratamiento de los costes para sistemas de backend, ofreciendo la posibilidad de implementar servicios Web en Internet sin la necesidad de grandes desembolsos iniciales en las áreas de infraestructuras y recursos tanto hardware como software. Sin embargo no existen aún muchas iniciativas con el objetivo de realizar sistemas de videoconferencia que aprovechen las ventajas del Cloud. Esta tesis doctoral propone un conjunto de técnicas, interfaces y algoritmos para la implentación de sistemas de videoconferencia en infraestructuras tanto públicas como privadas de Cloud Computing. Las técnicas propuestas en la tesis se basan en la realización de un servicio básico de videoconferencia que se ejecuta directamente en el navegador sin la necesidad de instalar ningún tipo de aplicación de escritorio. Para ello el desarrollo de esta tesis parte de una aplicación RIA con tecnologías que hoy en día permiten acceder a la cámara y al micrófono directamente desde el navegador, y enviar los datos que capturan a través de la conexión de Internet. Además se han implementado interfaces que permiten a usuarios finales la participación en salas de videoconferencia que se ejecutan en servidores de proveedores de Cloud. Para ello se partió de los resultados obtenidos en las técnicas anteriores de ejecución de aplicaciones en el navegador y se implementaron los recursos de backend en la nube. Además se modificó un servicio ya existente implementado en el departamento para adaptarlo a los requisitos típicos de las infraestructuras de Cloud Computing. Alcanzado este punto se procedió a analizar si las infraestructuras propias de los proveedores públicos de Cloud Computing podrían soportar el tráfico generado por los sistemas que se habían adaptado. Este análisis se centró tanto a nivel de red como a nivel de capacidad de procesamiento y estabilidad de los sistemas. Para los pasos de análisis y validación de los sistemas Cloud se tomaron consideraciones más generales para abarcar casos como el procesamiento de datos multimedia en la nube, campo en el que comienza a haber bastante investigación en los últimos años. Como último paso se ideó una metodología de implementación de este tipo de aplicaciones para que fuera posible abaratar los costes de los sistemas de videoconferencia haciendo uso de clouds híbridos. Finalmente en la tesis se abre una discusión sobre las conclusiones obtenidas a lo largo de este amplio estudio, obteniendo resultados útiles en las distintas etapas de implementación de los sistemas de videoconferencia en la nube.

Developing front-end Web 2.0 technologies to access services, content and things in the future Internet

The future Internet is expected to be composed of a mesh of interoperable web services accessible from all over the web. This approach has not yet caught on since global user?service interaction is still an open issue. This paper states one vision with regard to next-generation front-end Web 2.0 technology that will enable integrated access to services, contents and things in the future Internet. In this paper, we illustrate how front-ends that wrap traditional services and resources can be tailored to the needs of end users, converting end users into prosumers (creators and consumers of service-based applications). To do this, we propose an architecture that end users without programming skills can use to create front-ends, consult catalogues of resources tailored to their needs, easily integrate and coordinate front-ends and create composite applications to orchestrate services in their back-end. The paper includes a case study illustrating that current user-centred web development tools are at a very early stage of evolution. We provide statistical data on how the proposed architecture improves these tools. This paper is based on research conducted by the Service Front End (SFE) Open Alliance initiative.

The new cloud computing paradigm: the way to IT seen as a utility

In the present competitive environment, companies are wondering how to reduce their IT costs while increasing their efficiency and agility to react when changes in the business processes are required. Cloud Computing is the latest paradigm to optimize the use of IT resources considering ?everything as a service? and receiving these services from the Cloud (Internet) instead of owning and managing hardware and software assets. The benefits from the model are clear. However, there are also concerns and issues to be solved before Cloud Computing spreads across the different industries. This model will allow a pay-per-use model for the IT services and many benefits like cost savings, agility to react when business demands changes and simplicity because there will not be any infrastructure to operate and administrate. It will be comparable to the well known utilities like electricity, water or gas companies. However, this paper underlines several risk factors of the model. Leading technology companies should research on solutions to minimize the risks described in this article. Keywords - Cloud Computing, Utility Computing, Elastic Computing, Enterprise Agility

Accessing advanced computational resources in Africa through Cloud Computing

Low resources in many African locations do not allow many African scientists and physicians to access the latest advances in technology. This deficiency hinders the daily life of African professionals that often cannot afford, for instance, the cost of internet fees or software licenses. The AFRICA BUILD project, funded by the European Commission and formed by four European and four African institutions, intends to provide advanced computational tools to African institutions in order to solve current technological limitations. In the context of AFRICA BUILD we have carried out, a series of experiments to test the feasibility of using Cloud Computing technologies in two different locations in Africa: Egypt and Burundi. The project aims to create a virtual platform to provide access to a wide range of biomedical informatics and learning resources to professionals and researchers in Africa.