Changing resonator geometry to boost sound power decouples size and song frequency in a small insect

Despite their small size, some insects, such as crickets, can produce high amplitude mating songs by rubbing their wings together. By exploiting structural resonance for sound radiation, crickets broadcast species-specific songs at a sharply tuned frequency. Such songs enhance the range of signal transmission, contain information about the signaler's quality, and allow mate choice. The production of pure tones requires elaborate structural mechanisms that control and sustain resonance at the species-specific frequency. Tree crickets differ sharply from this scheme. Although they use a resonant system to produce sound, tree crickets can produce high amplitude songs at different frequencies, varying by as much as an octave. Based on an investigation of the driving mechanism and the resonant system, using laser Doppler vibrometry and finite element modeling, we show that it is the distinctive geometry of the crickets' forewings (the resonant system) that is responsible for their capacity to vary frequency. The long, enlarged wings enable the production of high amplitude songs; however, as a mechanical consequence of the high aspect ratio, the resonant structures have multiple resonant modes that are similar in frequency. The drive produced by the singing apparatus cannot, therefore, be locked to a single frequency, and different resonant modes can easily be engaged, allowing individual males to vary the carrier frequency of their songs. Such flexibility in sound production, decoupling body size and song frequency, has important implications for conventional views of mate choice, and offers inspiration for the design of miniature, multifrequency, resonant acoustic radiators.

Biomechanics of Substrate Boring by Fig Wasps: Role of Zinc in Insect Cuticle

There are many biomechanical challenges that a female insect must meet to successfully oviposit and ensure her evolutionary success. These begin with selection of a suitable substrate through which the ovipositor must penetrate without itself buckling or fracturing. The second phase corresponds to steering and manipulating the ovipositor to deliver eggs at desired locations. Finally, the insect must retract her ovipositor fast to avoid possible predation and repeat this process multiple times during her lifetime. From a materials perspective, insect oviposition is a fascinating problem and poses many questions. Specifically, are there diverse mechanisms that insects use to drill through hard substrates without itself buckling or fracturing? What are the structure-property relationships in the ovipositor material? These are some of the questions we address with a model system consisting of a parasitoid fig wasp - fig substrate system. To characterize the structure of ovipositors, we use scanning electron microscopy with a detector to quantify the presence of transition elements. Our results show that parasitoid ovipositors have teeth like structures on their tips and contain high amounts of zinc as compared to remote regions. Sensillae are present along the ovipositor to aid detection of chemical species and mechanical deformations. To quantify the material properties of parasitoid ovipositors, we use an atomic force microscope and show that tip regions have higher modulus as compared to remote regions. Finally, we use videography to show that ovipositors buckle during oviposition and estimate the forces needed to cause substrate boring based on Euler buckling analysis. Such methods may be useful for the design of functionally graded surgical tools.

Isolation and characterization of biofumigant from leaves of Lantana camara for control of stored grain insect pests

Due to environmental concerns, health hazards to man and the evolution of resistance in insect pests, there have been constant efforts to discover newer insecticides both from natural sources and by chemical synthesis. Natural sources for novel molecules hold promise in view of their eco-friendly nature, selectivity and mammalian safety. We have isolated one natural bioactive molecule from the leaves of Lantana camara named Coumaran, based on various physical-chemical and spectroscopic techniques (IR, H-1 NMR, C-13 NMR and MS). Coumaran is highly toxic and very low concentration is needed for control of stored product insects. This molecule has potent grain protectant potential and caused significant reduction in F1 progeny of all the three species in the treated grain and the progeny was completely suppressed at 30 mu g/l. The differences in germination between the control and treated grains were not significant. The lack of any adverse effect of Coumaran on the seed germination is highly desirable for a grain protectant, becoming a potential source of biofumigant for economical and environmentally friendly pest control strategies against stored grain pests during storage of grains or pulses. (C) 2013 Elsevier B.V. All rights reserved.

Social insect colony as a biological regulatory system: modelling information flow in dominance networks

Social insects provide an excellent platform to investigate flow of information in regulatory systems since their successful social organization is essentially achieved by effective information transfer through complex connectivity patterns among the colony members. Network representation of such behavioural interactions offers a powerful tool for structural as well as dynamical analysis of the underlying regulatory systems. In this paper, we focus on the dominance interaction networks in the tropical social wasp Ropalidia marginata-a species where behavioural observations indicate that such interactions are principally responsible for the transfer of information between individuals about their colony needs, resulting in a regulation of their own activities. Our research reveals that the dominance networks of R. marginata are structurally similar to a class of naturally evolved information processing networks, a fact confirmed also by the predominance of a specific substructure-the `feed-forward loop'-a key functional component in many other information transfer networks. The dynamical analysis through Boolean modelling confirms that the networks are sufficiently stable under small fluctuations and yet capable of more efficient information transfer compared to their randomized counterparts. Our results suggest the involvement of a common structural design principle in different biological regulatory systems and a possible similarity with respect to the effect of selection on the organization levels of such systems. The findings are also consistent with the hypothesis that dominance behaviour has been shaped by natural selection to co-opt the information transfer process in such social insect species, in addition to its primal function of mediation of reproductive competition in the colony.

Nanomaterial-based ionic polymermetal composite insect scale flapping wing actuators

Small size actuators (8 mm x 1 mm), IPMNC (RuO2/Nafion) and IPMNC (LbL/CNC) are studied for flapping at the frequency of insects and compared to Platinum IPMC-Pt. Flapping wing actuators based on IPMNC (RuO2/Nafion) are modeled with the size of three dragonfly species. To achieve maximum actuation performance with Sympetrum Frequens scale actuator with optimized Young's modulus, the effect of variation of thickness of electrode and Nafion region of Sympetrum Frequens scale actuator is studied. A trade-off in the electrode thickness and Young's modulus for dragonfly size IPMNC-RuO2/Nafion actuator is essential to achieve the desirable flapping performance.

Letter from the Editor: special issue of papers on “The Use of Native Insect Herbivores for the Management of Eurasian Watermilfoil," presented at a special session of the Annual Meeting, Aquatic Plant Management Society, July 1998, Memphis, TN

1 page

Eurasian watermilfoil biomass associated with insect herbivores in New York

A study of aquatic plant biomass within Cayuga Lake, New York spans twelve years from 1987-1998. The exotic Eurasian watermilfoil ( Myriophyllum spicatum L.) decreased in the northwest end of the lake from 55% of the total biomass in 1987 to 0.4% in 1998 and within the southwest end from 50% in 1987 to 11% in 1998. Concurrent with the watermilfoil decline was the resurgence of native species of submersed macrophytes. During this time we recorded for the first time in Cayuga Lake two herbivorous insect species: the aquatic moth Acentria ephemerella , first observed in 1991, and the aquatic weevil Euhrychiopsis lecontei , first found in 1996 . Densities of Acentria in southwest Cayuga Lake averaged 1.04 individuals per apical meristem of Eurasian watermilfoil for the three-year period 1996-1998. These same meristems had Euhrychiopsis densities on average of only 0.02 individuals per apical meristem over the same three-year period. A comparison of herbivore densities and lake sizes from five lakes in 1997 shows that Acentria densities correlate positively with lake surface area and mean depth, while Euhrychiopsis densities correlate negatively with lake surface area and mean depth. In these five lakes, Acentria densities correlate negatively with percent composition and dry mass of watermilfoil. However, Euhrychiopsis densities correlate positively with percent composition and dry mass of watermilfoil. Finally, Acentria densities correlate negatively with Euhrychiopsis densities suggesting interspecific competition.

A comparative assessment of the methods of control of water hyacinth infestation with regards to fish production

Water hyacinth (Eichhornia crassipes) has been subject of three control methods since its arrival into the Nigerian freshwater lagoon system in 1984 - mechanical, chemical and biological. An assessment of these three methods seems to suggest that mechanical and chemical control methods, both of which being costly, must be applied either solely or integrated to combat the present level of considerable infestation in Nigeria. The biological control methods are advisable for slow, sustained control and can only cope with low levels of infestation. It is thus concluded that the preliminary control method should be mechanical or chemical to effectively abate the nuisance plant, followed by biological control once infestation levels have been sufficiently reduced

Incidence of mayfly (Povilla sp.) infestation of wooden infrastructures of artisanal fishers in the lagoon and marine fisheries locations of Ogun State, Nigeria

A diagnostic survey of the incidence of mayfly (Povilla sp.) infestation of wooden infrastructures of the artisanal fishers in ten (10) lagoons and marine fishing villages of Ogun States (Nigeria) was carried out through the application of structured questionnaire and participatory Rural Appraisal interviews. The demographic, infrastructural and socioeconomic characteristics of the ten fishing villages sampled were derived and analyzed. The infestation which occurs all year round is found to be most prevalent (70%) in the wet season, increasing proportionally with salinity from 56% (brackish water); to 63% (marine water). The life-span of Povilla sp. is reduced from 55% to 62% (freshwater); 41% (brackish water) and 38% (marine water). Annual financial loss of N10,000.00 per fisher or N80,000,000.00 to the 8000 artisanal fishers affected in Ogun State is discussed. It is recommended that fishers should preferably use non-wood crafts and infrastructures while adopting appropriate management strategies for containing the existing infestation

Lake Kainji water hyacinth infestation and the control strategies

The paper documents the aquatic vascular plants situation of Lake Kainji, particularly with the invasion of water hyacinth (Eichhormia crassipes) hitherto alien to the lake system. The frequency of occurrence of some aquatic plants on Lake Kainji have increased whilst a few decreased over the period between 1984 and 1995. More than 53.6% of the lake surface has now been covered by aquatic vascular plants of which water hyacinth alone covered 30.6% (16.4% of the system). Apart from the characteristic rapid multiplication and biomass build-up of the plant, more than 9.1 clumps with a diameter range between 0.8-4cm enter the lake per minute. Thus more than 16.4ha per day or annually 6000ha of water hyacinth are added as drifts. Because of the peculiar hydrological cycle of the lake and the plant aggressiveness and invasiveness, NIFFR (with the support of the GTZ) had developed an approach of control which combines manual, biological, natural, boom construction and chemical measures. These are discussed

A preliminary investigation into the effect of different storage methods on the keeping quality of smoked Oreochromis niloticus

The study was carried out to asses the nutritional qualities of smoked O. niloticus and to discover the best methods of storage to minimize spoilage and infestation of smoked fish. Result showed that the protein contents in A and D decreased while the protein contents of b and C increased. The lipid content increased only in A while it decreased in B-C and D. The moisture content generally increased over the period of storage and there was an increase in ash content only in C while it decreased in A, B and D. The samples packed in polythene bag suffered about 35% mould infection and a few were attached by rodents with some fouling. Samples packed in jute bag were in good condition but were slightly attached by insect. All samples packed in carton and basket were still in good state but there were insect attack in those packed in carton

Survey of fungal infestation of some fish species from Tagwai dam, Minna, Niger State

Survey of Fungal infestation of some species of fish in Tagwai Dam Minna was carried out from March to June 2002. Fungi were isolated from the scale/skin, gills and fins. Twenty-one fungi species were identified from 18 species of fish microbial growth was measured by direct cell count using Stuart colony counter. Most of the fungi encountered were of the mould group and infestation occurred among all the species sampled. The infestation was predominantly by Aspergillus species and the scale/skin was most widely affected. The study showed the identified fungi in order of frequency to be as follows. Aspergillius niger. Rrhizopus spp. Mmucor spp Aspergilus flavum. Aspergillus parasitous. Aspergillus fumigatus, Microsporum canis. Penicillum virridicalumand Fusarium spp respectively. Aspergillus niger occurred on all the species of fish sampled. Barrilius spa and Chrysichrhy auratus longifilis had significantly higher (P<0.05) mean fungal load on their fins and gills. There was no significant difference (P>0.05) in the mean fungal load in different parts of the body of other fish species sampled

Botanical insecticides prescription for fish pest control and infestation free protein yield

The dry powders of four local species namely Piper guineense Schum and Thonn, Aframomum melegueta Schum, Zingiber officinale Rose; Capsicum annum Miller at three concentrations of 15g, 20g and 25g.kg were evaluated for their insecticidal effects against the larval of the dried fish weevil Demestes maculates Degeer. All the four species showed some effectiveness with P. guineense given a 100% mortality at the end of 72 hours at the three concentrations. The other species though gave less mortality were able to slow down the rate of development of the larvae to the adult size