Pluriactivity and family farming in Brazil: the case of Rio Grande do Sul

Includes bibliography

Development of equations to estimate microbial contamination in ruminal incubation residues of forage produced under tropical conditions using 15N as a label1

The objective of this study was to use 15N to label microbial cells to allow development of equations for estimating the microbial contamination in ruminal in situ incubation residues of forage produced under tropical conditions. A total of 24 tropical forages were ruminal incubated in 3 steers at 3 separate times. To determine microbial contamination of the incubated residues, ruminal bacteria were labeled with 15N by continuous intraruminal infusion 60 h before the first incubation and continued until the last day of incubation. Ruminal digesta was collected for the isolation of bacteria before the first infusion of 15N on adaptation period and after the infusion of 15N on collection period. To determine the microbial contamination of CP fractions, restricted models were compared with the full model using the model identity test. A value of the corrected fraction A was estimated from the corresponding noncorrected fraction by this equation: Corrected A fraction (ACPC) = 1.99286 + 0.98256 × A fraction without correction (ACPWC). The corrected fraction B was estimated from the corresponding noncorrected fraction and from CP, NDF, neutral detergent insoluble protein (NDIP), and indigestible NDF (iNDF) using the equation corrected B fraction (BCPC) = -17.2181 - 0.0344 × fraction B without correction (BCPWC) + 0.65433 × CP + 1.03787 × NDF + 2.66010 × NDIP - 0.85979 × iNDF. The corrected degradation rate of B fraction (kd)was estimated using the equation corrected degradation rate of B fraction (kdCPC) = 0.04667 + 0.35139 × degradation rate of B fraction without correction (kdCPWC) + 0.0020 × CP - 0.00055839 × NDF - 0.00336 × NDIP + 0.00075089 × iNDF. This equation was obtained to estimate the contamination using CP of the feeds: %C = 79.21 × (1 - e-0.0555t) × e-0.0874CP. It was concluded that A and B fractions and kd of CP could be highly biased by microbial CP contamination, and therefore these corrected values could be obtained mathematically, replacing the use of microbial markers. The percentage of contamination and the corrected apparent degradability of CP could be obtained from values of CP and time of incubation for each feed, which could reduce cost and labor involved when using 15N. © 2013 American Society of Animal Science. All rights reserved.

Efeito de diferentes dosagens do preparado de anticorpos policlonais específicos sobre as variáveis ruminais, degradabilidade in situ e digestibilidade in vivo de bovinos alimentados com dieta de alto concentrado

Pós-graduação em Zootecnia - FMVZ

Degradabilidade in situ e consumo voluntário de capim Tanzânia (Panicum maximu, J. cv. Tanzânia), sob pastejo, por vacas em lactação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Composição química, digestibilidade e produção de gases in vitro de três espécies forrageiras tropicais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ruminal degradability of neutral detergent fiber of Cynodon spp. grasses at four regrowth ages

The aim of this work was to determine ruminal degradation of neutral detergent fiber of grasses of the genus Cynodon, harvested at four cutting ages. It was used a randomized block design, with five treatments arranged in a split plot, the five evaluated genotypes: Tifton 85, Jiggs, Russel, Tifton 68 and Vaquero; were the plots and ages of cutting were the subplots: 28, 48, 63 and 79 days. By adding one day in the cutting age, there was a linear reduction in the effective degradability of neutral detergent fiber of blade and stem of 0.16 and 0.18%, respectively. The increase in the cutting age had a linear and positive influence on the undegradable neutral detergent fiber with daily increments for leaf and stem of 0.12 and 0.18%, respectively. At the 28 regrowth day, all genotypes showed higher content of potentially degradable insoluble fraction, effective degradability and lower undegradable fraction of the neutral detergent fiber of blade and stem in relation to other ages, in this way this interval is recommended for cutting management.

The effect of exogenous fibrolytic enzymes and a ferulic acid esterase-producing inoculant on the fibre degradability, chemical composition and conservation characteristics of alfalfa silage

The objective of this study was to determine the effect of applying fibrolytic enzymes at ensiling, either alone or in combination with a ferulic acid esterase-producing bacterial silage inoculant, on the silage conservation characteristics and nutritive value of alfalfa (Medicago sativa L). Second-cut alfalfa (340 g DM/kg fresh crop) was harvested, wilted, chopped and sub-sampled into 24 batches. Samples were randomly allocated in triplicate to one of four enzyme product treatments supplying endoglucanases and xylanases: none (control), EN1, EN2, EN3; applied alone or in combination with a ferulic acid esterase-producing silage inoculant (FAEI). Treatments were arranged in a 4 x 2 factorial design. All enzyme treatments were applied at 2 ml enzyme product/kg herbage DM, and inoculant was applied at 1 x 10(5) cfu/g fresh herbage. Samples were packed into laboratory-scale silos and stored for 7, 27 or 70 days, and analysed for dry matter (DM) losses, aerobic stability, chemical composition and in vitro ruminal degradability. The use of enzymes did not affect (P>0.05) ensilage DM losses or lactic or acetic acid concentrations after 70 days of ensilage, compared to the control silage. Silage produced using EN1 had lesser neutral detergent fibre (aNDF, P=0.046) and acid detergent fibre (ADF; P=0.006) concentrations than control silage. However, no difference (P>0.05) was observed between the control silage and silage produced with EN1 for aNDF or ADF degradability (NDFD, ADFD). Silages produced with FAEI had greater DM losses (P=0.017) and pH (P<0.001) and lesser NDFD (P=0.019), ADFD (P=0.010) and proportion of lactic acid in the total fermentation products (P=0.006) after 70 days of ensilage, compared to uninoculated silages. The use of fibrolytic enzymes did not have a major effect on the ensilage fermentation of alfalfa, either ensiled alone or with an inoculant. No advantage in ruminal DM or fibre degradability was observed for silages produced with fibrolytic enzymes. The use of a ferulic acid esterase-producing inoculant alone did not improve the nutritive value of alfalfa silage, and did not promote any incremental effects when applied in combination with fibrolytic enzyme products. Crown Copyright (C) 2014 Published by Elsevier B.V. All rights reserved.

Clinical, biochemical and haemathological effects in Rhamdia quelen exposed to cypermethrin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparative in vitro evaluation of forage legumes (prosopis, acacia, atriplex, and leucaena) on ruminal fermentation and methanogenesis

Two experiments in vitro were conducted to evaluate four Egyptian forage legume browses, i.e., leaves of prosopis (Prosopis juliflora), acacia (Acacia saligna), atriplex (A triplex halimus), and leucaena (Leucaena leucocephala), in comparison with Tifton (Cynodon sp.) grass hay for their gas production, methanogenic potential, and ruminal fermentation using a semi-automatic system for gas production (first experiment) and for ruminal and post ruminal protein degradability (second experiment). Acacia and leucaena showed pronounced methane inhibition compared with Tifton, while prosopis and leucaena decreased the acetate:propionate ratio (P<0.01). Acacia and leucaena presented a lower (P<0.01) ruminal NH3-N concentration associated with the decreasing (P<0.01) ruminal protein degradability. Leucaena, however, showed higher (P<0.01) intestinal protein digestibility than acacia. This study suggests that the potential methanogenic properties of leguminous browses may be related not only to tannin content, but also to other factors.

Joint loading decreased by inexpensive and minimalist footwear in elderly women with knee osteoarthritis during stair descent

Objective Previous studies indicate that flexible footwear, which mimics the biomechanics of walking barefoot, results in decreased knee loads in patients with knee osteoarthritis (OA) during walking. However, the effect of flexible footwear on other activities of daily living, such as descending stairs, remains unclear. Our objective was to evaluate the influence of inexpensive and minimalist footwear (Moleca) on knee adduction moment (KAM) during stair descent of elderly women with and without knee OA. Methods. Thirty-four elderly women were equally divided into an OA group and a control group (CG). Stair descent was evaluated in barefoot condition, while wearing the Moleca, and while wearing heeled shoes. Kinematics and ground reaction forces were measured to calculate KAM by using inverse dynamics. Results. The OA group experienced a higher KAM during midstance under the barefoot condition (233.3%; P = 0.028), the Moleca (379.2%; P = 0.004), and heeled shoes (217.6%; P = 0.007). The OA group had a similar knee load during early, mid, and late stance with the Moleca compared with the barefoot condition. Heeled shoes increased the knee loads during the early-stance (versus barefoot [16.7%; P < 0.001] and versus the Moleca [15.5%; P < 0.001]), midstance (versus barefoot [8.6%; P = 0.014] and versus the Moleca [9.5%; P = 0.010]), and late-stance phase (versus barefoot [10.6%; P = 0.003] and versus the Moleca [9.2%; P < 0.001]). In the CG, the Moleca produced a knee load similar to the barefoot condition only during the early-stance phase. Conclusion. Besides the general foot protection, the inexpensive and minimalist footwear contributes to decreasing knee loads in elderly women with OA during stair descent. The loads are similar to the barefoot condition and effectively decreased when compared with heeled shoes.

Chemical characterization and in vitro biological activity of four tropical legumes, Styzolobium aterrimum L., Styzolobium deeringianum, Leucaena leucocephala, and Mimosa caesalpiniaefolia, as compared with a tropical grass, Cynodon spp. for the use in ruminant diets

Leucaena leucocephala (LEU) and three under-utilized tanniferous legumes, Styzolobium aterrimum L. (STA), Styzolobium deeringianum (STD), and Mimosa caesalpiniaefolia Benth (MIC) were chemically characterized and the biological activity of tannins was evaluated using in vitro simulated ruminal fermentation through tannin-binding polyethylene glycol (PEG) and compared with a non-tanniferous tropical grass hay, Cynodon spp. (CYN). The Hohenheim gas test was used and gas production (GP) was recorded at 4, 8, 12, 24, 32, 48, 56, 72, 80, and 96 h incubation with and without PEG. Kinetic parameters were estimated by an exponential model. STA, STD, and LEU contained higher (P < 0.05) crude protein than MIC, which had greater neutral detergent fibre and acid detergent fibre. Total phenols, total tannins, and condensed tannins (CT) were consistently the highest in MIC. Gas production was the lowest from MIC (P < 0.05) and the highest in LEU and STA. MIC + PEG largely reduced (P < 0.05) the lag phase and the fractional rate of fermentation and increased potential GP. Kinetic parameters of STA + PEG and LEU + PEG were not affected. LEU + PEG produced greater gas increment (P < 0.05) than STD + PEG, although both legumes had the same CT. All legumes except MIC were more extensively degraded than CYN. However, fermentation of the legumes was differently affected by the presence and proportions of CT, indigestible fibre or both.

Effectiveness of a long-term use of a minimalist footwear versus habitual shoe on pain, function and mechanical loads in knee osteoarthritis: a randomized controlled trial

Background: Recent studies have shown an important reduction of joint overload during locomotion in elderly women with knee osteoarthritis (OA) after short- term use of minimalist shoes. Our aim is to investigate the chronic effect of inexpensive and minimalist footwear on the clinical and functional aspects of OA and gait biomechanics of elderly women with knee OA. Methods/Design: Fifty-six elderly women with knee OA grade 2 or 3 (Kellgren and Lawrence) are randomized into blocks and allocated to either the intervention group, which will use flexible, non-heeled shoes-Moleca (R)-for six months for at least six hours daily, or the control group, which could not use these shoes. Neither group is undergoing physical therapy treatment throughout the intervention period. Moleca (R) is a women's double canvas, flexible, flat walking shoe without heels, with a 5-mm anti-slip rubber sole and a 3-mm internal wedge of ethylene vinyl acetate. Both groups will be followed for six months and will be assessed at baseline condition, after three months, and after six months (end of intervention). All the assessments will be performed by a physiotherapist that is blind to the group allocation. The primary outcome is the pain Western Ontario and McMaster Universities Osteoarthritis (WOMAC) score. The secondary outcomes are global WOMAC score; joint stiffness and disability WOMAC scores; knee pain with a visual analogue scale; walking distance in the six-minute walk test; Lequesne score; amount and frequency (number of days) of paracetamol (500 mg) intake over six months; knee adduction moment during gait; global medical assessment score; and global patient auto-assessment score. At baseline, all patients receive a diary to record the hours of daily use of the footwear intervention; every two weeks, the same physiotherapist makes phone calls to all patients in order to verify adherence to treatment. The statistical analysis will be based on intention to treat analysis, as well as general linear models of analysis of variance for repeated measure to detect treatment-time interactions (alpha = 5%). Discussion: This is the first randomized, clinical trial protocol to assess the chronic effect of minimalist footwear on the clinical and functional aspects and gait biomechanics of elderly women with knee osteoarthritis. We expect that the use of Moleca (R) shoes for six months will provide pain relief, reduction of the knee adduction moment when walking, and improve joint function in elderly women with knee OA, and that the treatment, thus, can be considered another inexpensive and easy-to-use option for conservative OA treatment.

Physical exercise improves cardiac autonomic modulation in hypertensive patients independently of angiotensin-converting enzyme inhibitor treatment

We investigated the influence of angiotensin-converting enzyme inhibitor (ACEi) treatment and physical exercise on arterial pressure (AP) and heart rate variability (HRV) in volunteer patients with hypertension. A total of 54 sedentary volunteers were divided into three groups: normotensive (NT Group), hypertensive (HT Group) and HT volunteers treated with ACEi (ACEi Group). All volunteers underwent an aerobic physical-training protocol for 15 weeks. HRV was investigated using a spectral analysis of a time series of R-R interval (RRi) that was obtained in a supine position and during a tilt test. Physical training promoted a significant reduction in the mean arterial pressure of the HT group (113 +/- 3 vs. 106 +/- 1 mm Hg) and the ACEi group (104 +/- 2 vs. 98 +/- 2 mm Hg). Spectral analysis of RRi in the supine position before physical training demonstrated that the NT and ACEi groups had similar values at low frequency (LF; 0.04-0.15 Hz) and high frequency (HF; 0.15-0.5 Hz) oscillations. The HT group had an increase in LF oscillations in absolute and normalized units and a decrease in HF oscillations in normalized units compared with the other groups. The HT group had the lowest responses to the tilt test during LF oscillations in normalized units. Physical training improved the autonomic modulation of the heart rate in the supine position only in the HT group. Physical training promoted a similar increase in autonomic modulation responses in the tilt test in all groups. Our findings show that aerobic physical training improves cardiac autonomic modulation in HT volunteers independently of ACEi treatment. Hypertension Research (2012) 35, 82-87; doi:10.1038/hr.2011.162; published online 29 September 2011

Effect of image resolution manipulation in rearfoot angle measurements obtained with photogrammetry

The aim of this study was to investigate the influence of image resolution manipulation on the photogrammetric measurement of the rearfoot static angle. The study design was that of a reliability study. We evaluated 19 healthy young adults (11 females and 8 males). The photographs were taken at 1536 pixels in the greatest dimension, resized into four different resolutions (1200, 768, 600, 384 pixels) and analyzed by three equally trained examiners on a 96-pixels per inch (ppi) screen. An experienced physiotherapist marked the anatomic landmarks of rearfoot static angles on two occasions within a 1-week interval. Three different examiners had marked angles on digital pictures. The systematic error and the smallest detectable difference were calculated from the angle values between the image resolutions and times of evaluation. Different resolutions were compared by analysis of variance. Inter- and intra-examiner reliability was calculated by intra-class correlation coefficients (ICC). The rearfoot static angles obtained by the examiners in each resolution were not different (P > 0.05); however, the higher the image resolution the better the inter-examiner reliability. The intra-examiner reliability (within a 1-week interval) was considered to be unacceptable for all image resolutions (ICC range: 0.08-0.52). The whole body image of an adult with a minimum size of 768 pixels analyzed on a 96-ppi screen can provide very good inter-examiner reliability for photogrammetric measurements of rearfoot static angles (ICC range: 0.85-0.92), although the intra-examiner reliability within each resolution was not acceptable. Therefore, this method is not a proper tool for follow-up evaluations of patients within a therapeutic protocol.

Diagnosi non distruttiva di murature di laterizio: applicazioni di tomografia sonica in laboratorio

Il lavoro svolto nella presente tesi di laurea si sviluppa all’interno del progetto di ricerca europeo SmooHs (Smart Monitoring of Historic Structures-Monitoraggio intelligente di edifici e strutture storiche) nell’ambito del 7 Programma Quadro della Commissione Europea. Gli edifici storici sono caratterizzati da elementi architettonici, materiali e soluzioni progettuali uniche e pertanto da valorizzare. Al fine si salvaguardare tali beni storici si richiede una conoscenza approfondita dei processi di deterioramento, legati spesso a fattori ambientali, e una loro rilevazione immediata. Il monitoraggio continuo dei possibili parametri che influenzano i suddetti processi può contribuire significativamente, ma un’applicazione estesa di questa tecnica è finora fallita a causa dei costi elevati di sistemi completi di monitoraggio; per questo sono stati osservati solitamente pochi parametri. L’obiettivo del progetto prevede lo sviluppo di strumenti di monitoraggio e diagnostica competitivi per gli specialisti nel settore che vada al di là del mero accumulo di dati. La normativa, in particolare le Linee Guida per l’applicazione al patrimonio culturale della normativa tecnica di cui all’Ordinanza PCM-3274 del 2005, evidenziano l’importanza di raggiungere un elevato livello di informazione dell’oggetto e del suo comportamento strutturale attraverso un percorso conoscitivo pluriramificato. “Si ha pertanto la necessità di affinare tecniche di analisi ed interpretazione dei manufatti storici mediante fasi conoscitive dal diverso grado di attendibilità, anche in relazione al loro impatto. La conoscenza può infatti essere conseguita con diversi livelli di approfondimento, in funzione dell’accuratezza delle operazioni di rilievo, delle ricerche storiche e delle indagini sperimentali” (Linee guida per l’applicazione all patrimonio culturale della normativa tecnica di cui all’ordinanza PCM-3274, 2005). Per quanto riguarda la caratterizzazione meccanica dei materiali, la normativa cita “Tecniche diagnostiche non distruttive di tipo indiretto, quali prove soniche ed ultrasoniche, consentono di valutare l’omogeneità dei parametri meccanici nelle diverse parti della costruzione, ma non forniscono stime quantitative attendibili dei loro valori, in quanto essi vengono desunti dalla misura di altre grandezze”. Non viene identificata una procedura univoca di prove non distruttive per ciascuna tipologia edilizia, pertanto ci domandiamo quale sia la procedura più idonea da utilizzare, considerando il tipo di risultato che si vuole ottenere. Si richiedono quindi degli studi di fattibilità di diverse tecniche non distruttive, soprattutto tecniche per immagini che diano un risultato più immediato da comprendere. Per questo scopo è stato impostato un programma di ricerca per valutare l’efficacia di una tecnica non distruttiva, la tomografia sonica, su provini in muratura costruiti nei laboratori del LaRM (Laboratorio di Resistenza dei Materiali del DISTART dell’Università di Bologna), reputando questa la strada da percorrere verso una diagnostica strutturale sempre più dettagliata. I provini in muratura di laterizio PNDE e PNDF, presentano al loro interno dei difetti (in polistirolo espanso) di geometria e posizione nota e diverse tessiture murarie (muratura di laterizio tradizionale e muratura a sacco). Nel capitolo 2 vengono descritte le caratteristiche e le basi teoriche delle prove soniche e di altre tecniche non distruttive, al fine di poterne fare un confronto. La tomografia sonica è definita e sono illustrate le sue peculiarità; vengono inoltre riportati alcuni esempi di applicazioni della stessa su strutture storiche lignee e murarie. Nel capitolo 3 sono presentati i provini oggetto di studio ed introdotto qualche accenno sulla natura delle murature di laterizio. Sono specificati i corsi e le sezioni verticali sui quali viene sperimentata la tomografia; essi hanno precise caratteristiche che permettono di eseguire una sperimentazione mirata all’individuazione di anomalie in una sezione e al riconoscimento di diverse tessiture murarie. Nel capitolo 4 è illustrata la procedura di acquisizione dei dati in laboratorio e di rielaborazione degli stessi nella fase di post-processing. Dopo aver scelto, in base alla risoluzione, la distanza che intercorre tra le stazioni di misura, sono stati progettati i vari percorsi uscenti da ogni stazione trasmittente, andando a definire i ray-paths delle sezioni sia orizzontali che verticali. I software per il calcolo dei tempi di volo (in ambiente LabView) e per l’inversione degli stessi (Geotom) sono presentati e vengono definite le istruzioni per l’utilizzo. Il capitolo 5 assieme al capitolo 6, mostra i risultati ottenuti dall’inversione dei tempi di volo. Per i diversi corsi orizzontali e sezioni verticali sono riportate le mappe di velocità ottenute al variare di diversi parametri di settaggio impostati nel software tomografico. Le immagini tomografiche evidenziano le caratteristiche interne delle sezioni studiate, in base alla risoluzione geometrica della tecnica. Nel capitolo 7 e 8 sono mostrati i risultati delle prove soniche dirette applicate sia sui corsi verticali sia sulle sezioni verticali. Le stazioni di misura considerate sono le stesse utilizzate per la tomografia. Il capitolo 9 riporta il confronto tra le mappe di velocità prodotte dalla tomografia sonica e gli istogrammi delle velocità registrate nelle prove soniche dirette. Si evidenziano le differenze nell’individuazione di difetti tra due metodologie differenti. Infine sono riportate le conclusioni sul lavoro svolto. I limiti e i vantaggi della tecnica tomografica vengono desunti dai risultati ottenuti per varie tipologie di sezioni, a confronto anche con risultati di prove soniche dirette. Ciò ci porta a definire la fattibilità di utilizzo della tomografia sonica nella diagnosi delle strutture in muratura.