Mesoscopic simulation of the impregnating process of unidirectional fibrous preform in resin transfer molding

The resin transfer molding has gained popularity in the preparation of fiber-reinforced polymer-matrix composites because of its high efficiency and low pollution. The non-uniform inter-tow and intra-tow flows are regarded as the reason of void formation in RTM. According to the process characteristics, the axisymmetric model was developed to study the interaction between the flow in the inter-tow space and that in the intra-tow space. The flow behavior inside the fiber tows was formulated using Brinkman's equation, while that in the open space around the fiber tows was formulated by Stokes' equation. The volume of fluid (VOF) method was applied to track the flow front, and the effects of filling velocity, resin viscosity, inter-tow dimension and intra-tow permeability on fluid pressure and flow front were analyzed. The results show that the flow front difference between the inter-tow and intra-tow becomes larger with the decrease of intra-tow permeability, as well as the increase of filling velocity and inter-tow dimension.

Preparation and characterization of luminescent cubic MCM-48 impregnated with an Eu3+ beta-diketonate complex

We report on the preparation of luminescent silica mesoporous molecular sieves (MCM-48) activated by the europium complex Eu(DBM)(3) . 2H(2)O (where DBM = dibenzoylmethane), using a simple wet impregnation method. Different concentrations of Eu(DBM)(3) . 2H(2)O were introduced into the MCM-48 cubic structure, and the resulting samples were washed with ethanol for different times. UV-Vis absorption measurements and thermogravimetric analysis were used to estimate the amount of Eu complex that has been incorporated within the pores of the MCM-48 host. The various samples were characterized by X-ray powder diffraction (XRD), infrared spectroscopy, diffuse reflectance (DR) and fluorescence measurements. The results reveal that Eu complexes have been successfully introduced into the pores of MCM-48 without disrupting the structure. All the impregnated MCM-48 materials show the typical red luminescence of Eu3+ when excited with a UV lamp. Shifts of the absorption maxima were observed in the DR and fluorescence excitation spectra and will be discussed in relation with guest-host interactions between the organic complex and the silica matrix. The decay profiles of the europium luminescence in the different samples were also measured and discussed.

Preparation, characterization and luminescent properties of MCM-41 type materials impregnated with rare earth complex

Hybrid materials incorporating Eu-(TTA)(3). 2H(2)O (7hereafter designated as Eu-TTA, with TTA: thenoyltrifluoroacetone) in unmodified or modified MCM-41 by 3-aminopropyl-triethoxysilane (APTES) were prepared by impregnation method. The obtained materials were characterized using X-ray diffraction (XRD), IR and diffuse reflectance spectroscopy and luminescence spectra. All the hybrid samples exhibited the characteristic emission bands of EU3+ under UV light excitation at room temperature, and the excitation spectra showed significant blue-shifts compared to the pure rare-earth complex. Although the red emission intensity in the modified hybrid was almost the half of the red emission intensity in the pure Eu-TTA complex at room temperature, the hybrid showed a much higher thermal stability due to the shielding character of the MCM-41 host.

Magnetic microsphere and its use in biochemical separation and analysis

Magnetic microsphere comprises a magnetically responsive metal or metal oxide core surrounded by a polymer shell with active groups. Nowadays, methods of directly coating polymer, monomer polymerazation, impregnation, extrusion and biological synthesis are generally used to prepare magnetic particles. This kind of superparamagnetic microspheres can be attached to chemical, biochemical and biological substances by their active groups, then applying a magnetic field to separate from the media. Preparation and utilization of magnetic microspheres in immunoassay, nucleic acid hybrization assay, gene sequencing, cell isolation, enzyme immoblization, receptor isolation and other Gelds are reviewed with 44 references in this paper. Also, the further development is outlooked.

Isobutane/butene alkylation over supported heteropoly acid catalysts: I. Influence of the structure of silica

Catalysts consisting of heteropoly acids (HPAs) supported on different silica and mesoporous molecular sieves have been prepared by impregnation and the sol-gel method, respectively, and their catalytic behavior in fixed-bed alkylation of isobutane with butene has been investigated. The activity, selectivity and stability of the supported-HPA catalysts could be correlated with the surface acidity of the catalysts, the structure of supports as well as the time on stream (TOS). In the fixed-bed reactor, the acidity of the heteropoly acid is favorable to the formation of dimerization products (C-8(=)); especially, the pore size of supports was seen to have an important effect on activity and product distribution of the catalysts. Contrary to the traditional solid-acid catalysts, the supported-HPA catalysts own an excellent stability for alkylation, which makes it possible for these supported catalysts to replace the liquid-acid catalysts used in industry.

The Apertospathulidae, a new family of haptorid ciliates (Protozoa, Ciliophora)

We studied the morphology of three rare haptorid ciliates, using live observation and silver impregnation: Apertospathula verruculifera n. sp., Longispatha elegans n. gen., n. sp., and Rhinothrix porculus (Penard, 1922) n. gen., n. comb. Simple ethanol fixation (50-70%, v/v) is recommended to reveal the ciliary pattern of "difficult" ciliates, such as R. porculus, by protargol impregnation. The three genera investigated have a distinct feature in common, viz., a lasso-shaped oral bulge and circumoral kinety, where the right half is slightly to distinctly longer than the left and the circumoral kinety is open ventrally. Thus, they are united in a new spathidiid family, the Apertospathulidae n. fam., which probably evolved from a Bryophyllum-like ancestor by partial reduction of the oral bulge and circumoral kinety. Apertospathula verruculifera has a wart-like process, the palpus dorsalis, at the anterior end of the dorsal brush. The right branch of the circumoral kinety is only slightly longer than the left one. Longispatha elegans has a straight oral bulge and circumoral kinety, the right branch of which extends to the posterior end of the body while the left branch ends in the anterior third of the body. Rhinothrix porculus, a curious ciliate with a snout-like dorsal elongation of the oral bulge, the palpus oralis, has a highly characteristic ciliary pattern: the oral pattern is as in Longispatha, but the bulge and circumoral kinety extend spirally to the posterior end of the body while the somatic kinetics course meridionally. This is achieved by inserting some shortened kinetics in the curves of the oral bulge.

Holosticha hamulata n. sp and Holosticha heterofoissneri Hu and Song, 2001, two urostylid ciliates (Protozoa, Ciliophora) from intertidal sediments of the Yellow Sea

Two marine urostylid ciliates, Holosticha hamulata n. sp. and Holosticha heterofoissneri Hu and Song, 2001, were investigated using live observation and protargol impregnation. Both species were isolated from Korean intertidal sediments of the Yellow Sea. Holosticha hamulata measures about 150 x 25 pro in vivo, and is characterized by a tripartite body shape with a narrow head, an inflated trunk, and a tail that distally projects ventrally forming a hook-like structure. It is the characteristic body shape that distinguishes H. hamulata distinctly from congeners. Holosticha hamulata differs from H. heterofoissneri, possibly the nearest relative, also by the location of the contractile vacuole (ahead of mid-body versus near posterior body third) and the configuration of the macronucleus (on average, 33 scattered nodules assuming a Y-shape versus 17 nodules that may form a U shape). The average number of the macronuclear nodules is a pronounced feature showing great consistency in populations of each species. However, their arrangement is variable in H. heterofoissneri where the nodules are basically scattered or connected by fine fibers forming an elongate U-shape. The location of the contractile vacuole as a taxonomic feature is discussed and a dichotomous key to the species of Holosticha sensu stricto is provided.

Morphology and infraciliature of three species of Metaurostylopsis (Ciliophora, Stichotrichia): M. songi n. sp., M. salina n. sp., and M. marina (Kahl 1932) from sediments, saline ponds, and coastal waters.

Two new urostylid ciliates, Metaurostylopsis songi n. sp. and Metaurostylopsis salina n. sp. and Metaurostylopsis marina (Kahl 1932) are investigated using live observation and protargol impregnation. These species were isolated in Korea from intertidal sediments, saline ponds, and coastal waters. Metaurostylopsis songi is in vivo about 120 pm x 25 mu m, has a slenderly ellipsoidal body, colorless cortical granules in rows on ventral and dorsal body sides, about 54 macronuclear nodules, 28-47 adoral membranelles, five frontal, two or three frontoterminal and six or seven transverse cirri, and 9-12 midventral cirral pairs followed posteriorly by 1-3 single cirri. In vivo M. salina is about 60 pin x 25 mu m, has a pyriform body, colorless cortical granules irregularly arranged, about 45 macronuclear nodules, 18-23 adoral membranelles, three frontal, three to five frontoterminal and two to five transverse cirri, and four or five midventral cirral pairs followed posteriorly by five to seven single cirri. Both species have three marginal cirral rows on each body side and 3 long dorsal kineties. The Korean specimens of M. marina match the Chinese population in all main features. Metaurostylopsis songi differs from M. marina by the more slender body, the number of frontal cirri (invariably five vs. four), and the arrangement of cortical granules (in rows on dorsal and ventral cortex vs. only along dorsal kinetics and anterior body margin). Metaurostylopsis salina differs from its congeners by the distinctly smaller size, the pyriform body shape, the scattered cortical granules (vs. in rows), and number of frontal cirri. It differs from M. marina also by the number of midventral cirral pairs (four or five vs. seven to 11).

Descriptions of Protospathidium serpens (Kahl, 1930) and P-fraterculum n. sp (Ciliophora, Haptoria), two species based on different resting cyst morphology

Protospathidium serpens (Kahl, 1930) is frequent in semiterrestrial and terrestrial habitats worldwide. Conventionally, all populations are considered as conspecific because they have very similar overall morphologies and morphometrics. We studied in detail not only the morphology of the vegetative cells but also the resting cysts using live observation, protargol impregnation, and scanning electron microscopy. These revealed a cryptic diversity and biogeographic pattern in details of the dorsal brush and cyst wall morphology. The cyst wall is spiny in the Austrian specimens, while smooth in the South African and Antarctic populations. Accordingly, P. serpens consists of at least two species: P. serpens (with spiny cyst wall) and P. fraterculum n. sp. (with smooth cyst wall); the latter is probably composed of two distinct taxa differing by the absence (South African)/presence (Antarctic) of a monokinetidal bristle tail in brush row 3, the number of dikinetids comprising brush row 1 (seven versus three), and the total number of brush dikinetids (29 versus 17). Protospathidium serpens is neotypitied with the new population from Austria. The significance of resting cyst morphology is discussed with respect to alpha-taxonomy and overall ciliate diversity.

Two trichodinid ectoparasites from marine molluscs in the Yellow Sea, off China, with the description of Trichodina caecellae n. sp (Protozoa : Ciliophora : Peritrichia)

The morphology and infraciliature of two ectoparasitic ciliates, Trichodina caecellae n. sp. and T. ruditapicis Xu, Song & Warren, 2000, parasitising the gills of marine molluscs from the Shandong coast of the Yellow Sea, China, were investigated following wet silver nitrate and protargol impregnation. T. caecellae was found on the small marine sand clam Caecella chinensis Deshayes and is distinguished mainly by the acute triangle-like blade, the very delicate central part and the needle-shaped ray. T. ruditapicis was studied based on four populations from three clams: two populations from Ruditapes philippinarum (Adams) and one each from Saxidomus purpuratus (Sowerby) and Solen grandis Dunker. All four populations fell within the range of morphometry and agreed closely in the overall appearance of the adhesive disc. However, variability was found in the denticle structure, especially in populations from different host clams. Our observations suggest that denticle morphology may be more or less variable between and within populations, and that such minor differences should not be overestimated. It should be emphasised that, except for the denticle morphology, the bright granules or circles in the centre of the adhesive disc represent another important feature facilitating the identification of this trichodinid species.

Morphology and Molecular Phylogeny of Trimyema koreanum n. sp., a Ciliate from the Hypersaline Water of a Solar Saltern

A new ciliate, Trimyema koreanum n. sp., isolated from hypersaline water (salinity of 293 parts per thousand) from a solar saltern in Korea, was investigated using live observation, protargol impregnation, and gene sequencing. Trimyema koreanum is about 30 x 13 mu m in vivo, has usually 23 longitudinal ciliary rows forming two distinct ciliary girdles visible both in vivo and in protargol impregnation. A third indistinct ciliary girdle as well as a girdle of mucocysts is distinguishable only in impregnated cells. We suggest T. koreanum as a new species, differing from the most similar species, T. marinum, by the presence of two distinct ciliary girdles (T. marinum usually has six ciliary girdles clearly visible in living cells and three anterior spirals that encircle the cell completely). Although the number of known 18S rRNA sequences in the genus Trimyema was limited, the Trimyema group including T. koreanum forms a strong clade. The phylogenetic position confirms that the isolate belongs to the genus Trimyema and is different from previously sequenced species. Trimyema koreanum is able to consume both prokaryotes and small eukaryotes (specifically, the alga Dunaliella sp.).

A new spirofilid ciliate from the yellow sea: Metastrongylidium distichum n gen, n sp (ciliophora, stichotrichia)

The morphology and infraciliature of a new ciliate, Metastrongylidium distichum, isolated from the Yellow Sea, are investigated using live observation and protargol impregnation. Metastrongylidium distichum is about 170 x 40 pm in vivo, clavate to elongate ellipsoidal with bluntly pointed posterior end, and has two macronuclear nodules, six distinctly large buccal and frontal cirri, three dorsal kineties and two each of spiralled ventral and marginal cirral rows. These features indicate a generic allocation in Strongylidium Sterki, 1878. However, the new ciliate has a distinct feature not recognizable in Strongylidiurn, viz., the presence of (three or four) transverse cirri. Thus, we propose a new genus Metastrongylidium for the new species, M distichum nov. gen., n. sp. Metastrongylidium belongs to the family Spirofilidae, where it differs from Mucotrichidium by the lack of postperistomial cirrus and the different frontal and ventral cirral pattern. Metastrongylidium distichum is easily distinguishable from the seemingly similar species Strongylidium californicum Kahl, 1932 by the macronuclear pattern (invariably 2 vs. many nodules). It highly resembles the poorly known species S. contortum (Gelei 1954) Borror, 1972 in the body outline and nuclear pattern, differing in the biotope, the posterior cirral pattern, and the arrangement of right marginal row.

Kiitricha minuta n. Sp., a peculiar hypotrichous ciliate (Ciliophora, Spirotrichea) from the Yellow Sea

The morphology and infraciliature of a new ciliate, Kiitricha minuta n. sp., isolated from the Yellow Sea, were investigated using live observation and protargol impregnation. Kiitricha minuta represents a third member of the rarely known order Kiitrichida. It is unique in the subclass Hypotrichia in having many rows of small uniform cirri along the right side of the body and the dorsal kineties composed of dikinetids, most of which bear two cilia. Kiitricha minuta n. sp. is ovoid and measures about 60 x 45 mu m in vivo. It has a huge buccal cavity occupying about 80% of the body length, numerous body extrusomes, one macronucleus and two micronuclei, 27-27 adoral membranelles, 9-12 frontoventral cirral rows, a submarginal row of 7-9 cirri, 6 or 7 transverse cirri, and roughly 7-9 dorsal kineties. This new species differs distinctly from its only congener Kiitricha marina by its smaller size (60 mu m vs. 80-150 mu m), the presence of body extrusomes (vs. absent), the different macronuclear pattern (one vs. two nodules), and the lower number of frontoventral cirral rows (9-12 vs. 21-26), which terminate at the anterior two-thirds of body (vs. extend to the posterior). The new term "submarginal cirral row" is introduced to distinguish from the marginal cirral row in typical hypotrichs sensu lato. Based on our new observations and the literature, an improved diagnosis for the genus Kiitricha is provided and its phylogenetic importance is discussed.

Fabrication and testing of a doped lanthanum gallate electrolyte thin-film solid oxide fuel cell

A supported lanthanum gallate (LSGM) electrolyte thin-film solid oxide fuel cell with Ni-YSZ cermet anode and strontium-doped lanthanum manganite (LSM)-yttria stabilized zirconia (YSZ) composite cathode was, for the first time, fabricated and tested. The cell was prepared by an unconventional approach, in which an LSGM thin film (about 15 mum thick) was first deposited on a porous substrate such as a porous YSZ disk by a wet process and sintered at a high temperature (above 1400degrees C). NiO was then incorporated into the porous substrate by a carefully controlled impregnation process and fired at a much lower temperature. In this way, the severe reaction between LSGM and NiO at a high temperature, which is required for the full densification of LSGM film, can be avoided. A strontium-doped LaMnO3 (LSM)-YSZ composite cathode was screen printed on the surface of the LSGM film and then fired at 1250degrees C. The electrolyte resistances of the SOFC single cells fabricated by this approach are much lower compared to those of thick LSGM film supported cells. A maximum output power density of over 0.85 W/cm(2) at 800degreesC with H-2 as fuel and air as oxidant for a fabricated cell was achieved. (C) 2002 The Electrochemical Society.

Methane aromatization in the absence of an added oxidant and the bench scale reaction test

A bench scale reaction test for methane aromatization in the absence of an added oxidant was performed and its reaction result evaluated based on the carbon balance of the system. The result was compared with those obtained from the micro-reaction test to ensure the accuracy of the internal standard analyzing method employed in this paper. The catalytic performances of modified Mo/HZSM-5 catalysts were examined. It was found that pre-treatment by steam on HZSM-5 weakened the serious deposition of coke, and pre-impregnation of n-ethyl silicate on HZSM-5 could improve the conversion of CH4, but had little effect on coke formation. A low temperature activation procedure including pre-reduction of the catalyst with methane prevents the zeolite lattice from being seriously destroyed by high valence state Mo species when the Mo loading is high. It was suggested that Mo2C species detected by XRD spectra was the active phase for CH4 aromatization.