Dalby Shopping Precinct Survey Report : Consumer Attitudes towards Proposed Extended Trading Hours at Dalby

Data was collected to measure shopper’s attitudes toward the proposed Sunday and limited public holiday trading in Dalby. Survey questionnaires were conducted between 29th August to 31st August at Coles Dalby and Dalby Shoppingtown Plaza. In total, 150 respondents participated in the survey. Overall, the findings suggest that most respondents, especially males, couples with children, fulltime workers and those under the age of 49 years, embrace the proposed Sunday and limited holiday trading in Dalby. While there are concerns over increasing competition for smaller retailers who already trade on Sundays, a majority of respondents indicated it would suit their lifestyle, be convenient, provide more jobs, increase trade for smaller retailers within the area, reduce queues and congestion observed on Saturdays. The majority of those shoppers that indicated they currently did some shopping on a Sunday reported they would continue to support smaller retailers who currently trade on Sundays and some public holidays, if changes came about. Those opposed to changes to trading hours indicated a belief that existing trading hours were sufficient. Most people indicated the proposed extension of trading hours would not harm the community or have a negative, detrimental effect on themselves or their family. The main findings presented in the report are as follows: - 96.8% of respondents surveyed reported to be local, permanent residents of Dalby. - Residents of Dalby visited shopping centres and stores on average 2.8 times per week. This frequency is proportionately higher than the average Australian shopping behaviour at 2.5 times per week (Roy Morgan Supermarket Monitor). - It was determined that weekday evenings (after 5 pm) were the busiest times for shopping, with Saturday the next most popular day to shop. - 68% of respondents support the proposal of the extended trading hours at supermarkets, department stores and the shopping centre in Dalby, 26% oppose and 6% are unsure. - 90% of the respondents agreed that residents of Dalby should be allowed the same choice as other regional towns and cities in supporting/opposing changes to trading hours. The remaining 10% expressed a disagreement. - A larger percentage of males supported the proposal for Sunday and limited holiday trading. Of all the males surveyed, 80% were in support, 15% were opposed and 5% unsure. 60% of female respondents support the proposal, while 33% oppose it and 5% were unsure. - The highest percentage of support exists in fulltime workers with 90% of those respondents supporting the proposal. - In contrast, the lowest percentage of support was found in the non-working (retired/unemployed) respondents, where 67% opposed the application. - It was noted that 71% of respondents employed casually also indicated opposition against proposed changes. Further questioning identified an underlying concern from casually employed persons that Sunday trade would force them onto Sunday work rosters. - 92% of shared households expressed support for Sunday and limited public holiday trading, while 83% of both couples with children and single parent with children at home also supported the application. - 72% of the respondents often find it necessary to do some grocery shopping in Dalby on a Sunday. 76% of shoppers who indicated they already undertook some shopping on Sunday, indicated would continue to shop and support smaller retailers. - Of the respondents surveyed, 44% have travelled outside of Dalby on a Sunday to shop. This indicates that such residents find it necessary to undertake some shopping on a Sunday and in order to do so, drive an hour to Toowoomba in order to access a range of retailers. - The most cited reasons for supporting Sunday and limited public holiday trade were; ‘More choice about when I shop and that is convenient’ (69%), ‘Sunday trade will create job opportunities’ (71%), ‘Sunday trade will be helpful when preparing school lunches and getting ready for the working week’ (62%), and ‘Sunday trade will reduce shopping congestion during peak shopping periods’ (62%) - The most cited reasons for opposing the proposed changes are that ‘Sunday trade may increase competition for small retailers who already trade on Sunday’ (41%), ‘Shops are already open 6 days a week which is enough’ (31%), and ‘Sunday is a day of rest or a religious day and shopping should not be allowed’ (23%). - 97% of respondents indicated they would not change their sporting or social commitment if changes to trading hours were implemented.

Mt Isa Shopping Precinct Survey Report : Consumer Attitudes towards Proposed Extended Trading Hours at Mt Isa

Data was collected to measure shopper’s attitudes toward the proposed Sunday and limited public holiday trading in Mt Isa. Survey questionnaires were conducted between 15th August to 17th August at Kmart Plaza, Woolworths, Miles St. and Mt Isa Plaza. In total, 300 respondents participated in the survey. Overall, the findings suggest that most respondents, especially males, couples with children and fulltime workers, embrace the proposed Sunday and limited holiday trading in Mt Isa. While there are concerns over increasing competition for smaller retailers who already trade on Sundays, a majority of respondents indicated it would suit their lifestyle, be convenient, provide more jobs, increase trade for smaller retailers within the area, reduce queues and congestion, and offer a less expensive grocery shopping. The majority of those shoppers that indicated they currently did some shopping on a Sunday reported they would continue to support smaller retailers who currently trade on Sundays and some public holidays, if changes came about. Those opposed to changes to trading hours also indicated a belief that existing trading hours were sufficient. Most people indicated the proposed extension of trading hours would not harm the community or have a negative, detrimental effect on themselves or their family. The main findings presented in the report are as follows: - 96% of respondents surveyed reported to be local, permanent residents of Mt Isa. - Residents of Mt Isa visited shopping centres and stores on average 2.4 times per week. This mirrors the average Australian shopping behaviour at 2.5 times per week (Roy Morgan Supermarket Monitor) - It was determined that Saturday was the busiest day for shopping with a majority of respondents indicating they visited stores on that day of the week. - 71% of respondents support the proposal of extended trading hours at shopping centres in Mt Isa, 25% oppose and 4% are unsure. - 87% of the respondents agreed that residents of Mt Isa should be allowed the same choice as other regional towns and cities in supporting/opposing changes to trading hours. The remaining 13% expressed a disagreement. - A larger percentage of males supported the proposal for Sunday and limited holiday trading. Of all the males surveyed, 81% were in support, 17% were opposed and 2% unsure. By contrast, 64% of female respondents support the proposal, while 31% oppose it and 5% are unsure. - The highest percentage of support exists in fulltime workers with 85% of those respondents supporting the proposal. In contrast, the lowest percentage of support was found in the non-working respondents, where 62% opposed the application. - 78% of couples living with children at home expressed support for Sunday and limited public holiday trading, while 60% of couples without children also supported the application. - Of the respondents surveyed, virtually none (less than 1%) have travelled outside of Mt Isa on a Sunday to shop. This indicates that due to the remote and isolated location of this town, residents do not have the option to travel reasonable distances in order to access a range of retailers. - 70% of the respondents often find it necessary to do some grocery shopping in Mt Isa on a Sunday. - Convenience is cited as the major reason for support (79%) followed by lifestyle (75%). - The most cited reasons for supporting ‘it would be convenient’ (81%), ‘It may create more jobs’ (77%), ‘It may reduce congestion during busy shopping periods’ (74%, and ‘It would make it easier for working families with kids’ (74%). - The most cited reasons for opposing the proposed changes are that ‘It will disadvantage smaller businesses’ (44%), ‘It is unnecessary’ (29%). - 72% of shoppers who indicated they already undertook some shopping on Sunday, indicated would continue to shop and support smaller retailers. - 98% of respondents indicated they would not change their sporting or social commitment if changes to trading hours were implemented.

Using extended random set to find specific patterns

With the overwhelming increase in the amount of data on the web and data bases, many text mining techniques have been proposed for mining useful patterns in text documents. Extracting closed sequential patterns using the Pattern Taxonomy Model (PTM) is one of the pruning methods to remove noisy, inconsistent, and redundant patterns. However, PTM model treats each extracted pattern as whole without considering included terms, which could affect the quality of extracted patterns. This paper propose an innovative and effective method that extends the random set to accurately weigh patterns based on their distribution in the documents and their terms distribution in patterns. Then, the proposed approach will find the specific closed sequential patterns (SCSP) based on the new calculated weight. The experimental results on Reuters Corpus Volume 1 (RCV1) data collection and TREC topics show that the proposed method significantly outperforms other state-of-the-art methods in different popular measures.

Numerical study of turbulent fluid flow and heat transfer in lateral perforated extended surfaces

Numerical study has been performed in this study to investigate the turbulent convection heat transfer on a rectangular plate mounted over a flat surface. Thermal and fluid dynamic performances of extended surfaces having various types of lateral perforations with square, circular, triangular and hexagonal cross sections are investigated. RANS (Reynolds averaged Navier–Stokes) based modified k–ω turbulence model is used to calculate the fluid flow and heat transfer parameters. Numerical results are compared with the results of previously published experimental data and obtained results are in reasonable agreement. Flow and heat transfer parameters are presented for Reynolds numbers from 2000 to 5000 based on the fin thickness.

Dual compressible hybrid quantum secret sharing schemes based on extended unitary operations

A crucial issue with hybrid quantum secret sharing schemes is the amount of data that is allocated to the participants. The smaller the amount of allocated data, the better the performance of a scheme. Moreover, quantum data is very hard and expensive to deal with, therefore, it is desirable to use as little quantum data as possible. To achieve this goal, we first construct extended unitary operations by the tensor product of n, n ≥ 2, basic unitary operations, and then by using those extended operations, we design two quantum secret sharing schemes. The resulting dual compressible hybrid quantum secret sharing schemes, in which classical data play a complementary role to quantum data, range from threshold to access structure. Compared with the existing hybrid quantum secret sharing schemes, our proposed schemes not only reduce the number of quantum participants, but also the number of particles and the size of classical shares. To be exact, the number of particles that are used to carry quantum data is reduced to 1 while the size of classical secret shares also is also reduced to l−2 m−1 based on ((m+1, n′)) threshold and to l−2 r2 (where r2 is the number of maximal unqualified sets) based on adversary structure. Consequently, our proposed schemes can greatly reduce the cost and difficulty of generating and storing EPR pairs and lower the risk of transmitting encoded particles.

Understanding advanced and extended professional practice

The Advanced Pharmacy Practice Framework Steering Committee (now replaced by the Pharmacy Practitioner Development Committee) undertook work to develop an advanced pharmacy practice recognition model. As part of that work, and to assure clarity and consistency in the terminology it uses, the Committee collated the definitions used in literature sources consulted. Most recently, this involved a review of the meaning attributed to the terms ‘advanced’ and ‘extended’ when used in the context of describing aspects of professional practice. Both terms encompass the acquisition of additional expertise. While ‘advanced’ practice involves the acquisition of additional expertise to achieve a higher performance level, ‘extended’ practice relates specifically to scope of practice and involves the acquisition of additional expertise sufficient to provide services or perform tasks that are outside the usual scope of practice of the profession. Performance level operates independently of scope of practice but both must be elucidated to fully describe the professional practice of an individual practitioner.

CLEIMS: Outcomes of a randomised educational trial of extended immersion in medical simulation

To report the outcomes of a randomised educational trial of a new methodology for extended immersion in medical simulation for senior medical students. Clinical Learning through Extended Immersion in Medical Simulation (CLEIMS) is a new methodology for medical student learning. It involves senior students working in teams of 4-5 through the clinical progress of one or more patients over a week, utilising a range of simulation methodologies (simulated patient assessment, simulated significant other briefing, virtual story continuations, pig-trotter wound repair, online simulated on-call modules, interprofessional simulated ward rounds and high fidelity mannequin-based emergency simulations), to enhance learning in associated workshops and seminars. A randomised educational trial comparing the methodology to seminars and workshops alone began in 2010 and interim results were reported at last year’s conference. Updated results are presented here and final primary endpoint outcomes will be available by the time of the conference.

Design of a tangible data visualization (extended)

In this paper we describe the design of DNA Jewelry, which is a wearable tangible data representation of personal DNA profile data. An iterative design process was followed to develop a 3D form-language that could be mapped to standard DNA profile data, with the aim of retaining readability of data while also producing an aesthetically pleasing and unique result in the area of personalised design. The work explores design issues with the production of data tangibles, contributes to a growing body of research exploring tangible representations of data and highlights the importance of approaches that move between technology, art and design.

Using an extended theory of planned behavior to predict a change in the type of blood product donated

Background Demand for essential plasma-derived products is increasing. Purpose This prospective study aims to identify predictors of voluntary non-remunerated whole blood (WB) donors becoming plasmapheresis donors. Methods Surveys were sent to WB donors who had recently (recent n = 1,957) and not recently donated (distant n = 1,012). Theory of Planned Behavior (TPB) constructs (attitude, subjective norm, self-efficacy) were extended with moral norm, anticipatory regret, and donor identity. Intentions and objective plasmapheresis donation for 527 recent and 166 distant participants were assessed. Results Multi-group analysis revealed that the model was a good fit. Moral norm and self-efficacy were positively associated while role identity (suppressed by moral norm) was negatively associated with plasmapheresis intentions. Conclusions The extended TPB was useful in identifying factors that facilitate conversion from WB to plasmapheresis donation. A superordinate donor identity may be synonymous with WB donation and, for donors with a strong moral norm for plasmapheresis, may inhibit conversion.

Hole mobility of 3.56 cm2V−1s−1accomplished using more extended dithienothiophene with furan flanked diketopyrrolopyrrole polymer

A highly extended dithienothiophene comonomer building block was used in combination with highly fused aromatic furan substituted diketopyrrolopyrrole for the synthesis of novel donor–acceptor alternating copolymer PDPPF-DTT. Upon testing PDPPF-DTT as a channel semiconductor in top contact bottom gate organic field effect transistors (OFETs), it was found to exhibit p-channel behaviour. The highest hole mobility of 3.56 cm2 V−1 s−1 was reported for PDPPF-DTT. To our knowledge, this is the highest mobility reported so far for the furan flanked diketopyrrolopyrrole class of copolymers using conventional device geometry with straightforward processing.

Extended Kalman filters using explicit and derivative-free local linearizations

We propose three variants of the extended Kalman filter (EKF) especially suited for parameter estimations in mechanical oscillators under Gaussian white noises. These filters are based on three versions of explicit and derivative-free local linearizations (DLL) of the non-linear drift terms in the governing stochastic differential equations (SDE-s). Besides a basic linearization of the non-linear drift functions via one-term replacements, linearizations using replacements through explicit Euler and Newmark expansions are also attempted in order to ensure higher closeness of true solutions with the linearized ones. Thus, unlike the conventional EKF, the proposed filters do not need computing derivatives (tangent matrices) at any stage. The measurements are synthetically generated by corrupting with noise the numerical solutions of the SDE-s through implicit versions of these linearizations. In order to demonstrate the effectiveness and accuracy of the proposed methods vis-à-vis the conventional EKF, numerical illustrations are provided for a few single degree-of-freedom (DOF) oscillators and a three-DOF shear frame with constant parameters.

An extended regression approach to estimating loads and their uncertainties in Great Barrier Reef catchments

There are numerous load estimation methods available, some of which are captured in various online tools. However, most estimators are subject to large biases statistically, and their associated uncertainties are often not reported. This makes interpretation difficult and the estimation of trends or determination of optimal sampling regimes impossible to assess. In this paper, we first propose two indices for measuring the extent of sampling bias, and then provide steps for obtaining reliable load estimates by minimizing the biases and making use of possible predictive variables. The load estimation procedure can be summarized by the following four steps: - (i) output the flow rates at regular time intervals (e.g. 10 minutes) using a time series model that captures all the peak flows; - (ii) output the predicted flow rates as in (i) at the concentration sampling times, if the corresponding flow rates are not collected; - (iii) establish a predictive model for the concentration data, which incorporates all possible predictor variables and output the predicted concentrations at the regular time intervals as in (i), and; - (iv) obtain the sum of all the products of the predicted flow and the predicted concentration over the regular time intervals to represent an estimate of the load. The key step to this approach is in the development of an appropriate predictive model for concentration. This is achieved using a generalized regression (rating-curve) approach with additional predictors that capture unique features in the flow data, namely the concept of the first flush, the location of the event on the hydrograph (e.g. rise or fall) and cumulative discounted flow. The latter may be thought of as a measure of constituent exhaustion occurring during flood events. The model also has the capacity to accommodate autocorrelation in model errors which are the result of intensive sampling during floods. Incorporating this additional information can significantly improve the predictability of concentration, and ultimately the precision with which the pollutant load is estimated. We also provide a measure of the standard error of the load estimate which incorporates model, spatial and/or temporal errors. This method also has the capacity to incorporate measurement error incurred through the sampling of flow. We illustrate this approach using the concentrations of total suspended sediment (TSS) and nitrogen oxide (NOx) and gauged flow data from the Burdekin River, a catchment delivering to the Great Barrier Reef. The sampling biases for NOx concentrations range from 2 to 10 times indicating severe biases. As we expect, the traditional average and extrapolation methods produce much higher estimates than those when bias in sampling is taken into account.