Temperature sensitivity of the low-moisture-content limit to negative seed longevity-moisture content relationships in hermetic storage

Background and Aims The negative logarithmic relationship between orthodox seed longevity and moisture content in hermetic storage is subject to a low-moisture-content limit (m(c)), but is m(c) affected by temperature? Methods Red clover (Trifolium pratense) and alfalfa (Medicago sativa) seeds were stored hermetically at 12 moisture contents (2-15 %) and five temperatures (-20, 30, 40, 50 and 65 degrees C) for up to 14.5 years, and loss in viability was estimated. Key Results Viability did not change during 14.5 years hermetic storage at -20 degrees C with moisture contents from 2.2 to 14.9 % for red clover, or 2.0 to 12.0 % for alfalfa. Negative logarithmic relationships between longevity and moisture contents > m(c) were detected at 30-65 degrees C, with discontinuities at low moisture contents; m(c) varied between 4.0 and 5.4 % (red clover) or 4.2 and 5.5 % (alfalfa), depending upon storage temperature. Within the ranges investigated, a reduction in moisture content below m(c) at any one temperature had no effect on longevity. Estimates of m(c) were greater the cooler the temperature, the relationship (P < 0.01) being curvilinear. Above m(c), the estimates of C-H and C-Q (i.e. the temperature term of the seed viability equation) did not differ (P > 0.10) between species, whereas those of K-E and C-W did (P < 0.001). Conclusions The low-moisture-content limit to negative logarithmic relationships between seed longevity and moisture content in hermetic storage increased the cooler the storage temperature, by approx. 1.5 % over 35 degrees C (4.0-4.2 % at 65 degrees C to 5.4-5.5 % at 30-40 degrees C) in these species. Further reduction in moisture content was not damaging. The variation in m(c) implies greater sensitivity of longevity to temperature above, compared with below, m(c). This was confirmed (P < 0.005).

Environmental control for layers

Light patterns have less effect on numbers of eggs laid by current stocks than on those of forty years ago, but the principles have not changed. Ovarian activity is stimulated by increasing photoperiods and suppressed by decreasing photoperiods. The light pattern used during rearing can still have large effects on age at 50% lay, even for modern stocks. Early sexual maturity maximises egg numbers but gives smaller eggs. Late maturity maximises egg size at the expense of numbers. The relationship between egg output (g/hen d) and age at first egg is curvilinear, with maximum yield occurring in flocks maturing in about the centre of their potential range. Fancy patterns of increasing daylength after maturity are probably not justified. A flock held on a constant 14h day will lay as many eggs as one given step up lighting. Intermittent lighting saves about 5% of feed consumption with no loss of output, provided that the feed has adequate amino acid content to allow for the reduced feed intake. Producers with light-proof laying houses should be taking advantage of intermittent lighting. The recommended light intensity for laying houses is still 10 lx, although the physiological threshold for response to changes in photoperiod is closer to 2 lx. Very dim (0.05 lx) light filtering into blacked out houses will not stimulate the hypothalamic receptors responsible for photo-sexual responses, but may affect the bird's biological clock, which can alter its response to a constant short photoperiod. Feed intake shows a curvilinear dependence on environmental temperature. At temperatures below the panting threshold, performance can be maintained by adjusting the feed so as to maintain an adequate intake of critical amino acids. Above the panting threshold, the hen is unable to take in enough energy to maintain normal output. There is no dietary modification which can effectively offset this problem. Diurnally cycling temperatures result in feed intake and egg production equivalent to that observed under a constant temperature equal to the mean of the cycle. When the poultry house is cooler at night than by day, it helps to provide light so that the birds can feed during the cooler part of the cycle.

Differential effects of temperature on fruit development and bean quality of contrasting genotypes of cacao (Theobroma cacao)

The effects of temperature and light integral on fruit growth and development of five cacao genotypes (Amelonado, AMAZ 15/15, SCA 6, SPEC 54/1 and UF 676) were studied in semi-controlled environment glasshouses in which the thermal regimes of cacao-growing regions of Brazil, Ghana and Malaysia were simulated. Fruit losses because of physiological will (cherelle will) were greater at higher temperatures and also differed significantly between genotypes, reflecting genetic differences in competition for assimilates between vegetative and reproductive components. Short-term measurements of fruit growth indicated faster growth rates at higher temperatures. In addition, a significant negative linear relationship between temperature and development time was observed. There was an effect of genotype on this relationship, such that time to fruit maturation at a given temperature was greatest for the clone UF 676 and least for AMAZ 15/15. Analysis of base temperatures, derived from these relationships indicated genetic variability in sensitivity of cacao fruit growth to temperature (base temperatures ranged from 7.5 degrees C for Amelonado and AMAZ 15/15 to 12.9 for SPEC 54/1). Final fruit size was a positive function of beam number for all genotypes and a positive function of light integral for Amelonado in the Malaysia simulated environment (where the temperature was almost constant). In simulated environments where temperature was the main variable (Brazil and Ghana) increases in temperature resulted in a significant decrease in final pod size for one genotype (Amelonado) in Brazil and for two genotypes (SPEC 54/1 and UF 676) in Ghana. It was hypothesised that pod growth duration (mediated by temperature), assimilation and beam number are all determinants of final pod size but that under specific conditions one of these factors may override the others. There was variability between genotypes in the response of beam size and beam lipid content to temperature. Negative relationships between temperature and bean size were found for Amelonado and UF 676. Lipid concentration was a curvilinear function of temperature for Amelonado and UF 676, with optimal temperatures of 23 degrees C and 24 degrees C, respectively. The variability observed here of different cacao genotypes to temperature highlights the need and opportunities for appropriate matching of planting material with local environments.

UV irradiance as a major influence on growth, development and secondary products of commercial importance in Lollo Rosso lettuce 'Revolution' grown under polyethylene films

The growth and production of anthocyanin, flavonoid and phenolic compounds were evaluated in Lollo Rosso lettuce 'Revolution' grown continuously under films varying in their ability to transmit LTV radiation (completely transparent to IN, transparent above 320, 350, 370 and 3 80 nm and completely opaque to LTV radiation). Plants were grown from seed under UV transparent and UV blocking films and destructively harvested 3-4 weeks after transplanting. Plants under a complete UV blocking film (UV400) produced up to 2.2 times more total above ground dry weight than plants under the UV transparent film. In contrast, anthocyanin content in plants under the UV blocking film was approximately eight times lower than in plants under a UV transparent film. Furthermore, there was a curvilinear relationship between the anthocyanin content and LTV wavelength cutoff such that above 370 run there was no further reduction in anthocyanin content. Fluorescence measurements indicated that photosynthetic performance index was 15% higher under the presence of UVB and UVA (UV280) than under the presence of UVA (UV320) and 53% higher than in the absence of UV radiation suggesting protection of the photosynthetic apparatus possibly by phenolic compounds. These findings are of particular importance as the potential of UV transmitting films to increase secondary compounds may offer the opportunity to produce plants commercially with increased health benefits compared to those grown under conventional films.

Numerical conformal mapping and mesh generation for polygonal and multiply-connected regions

Details are given of a boundary-fitted mesh generation method for use in modelling free surface flow and water quality. A numerical method has been developed for generating conformal meshes for curvilinear polygonal and multiply-connected regions. The method is based on the Cauchy-Riemann conditions for the analytic function and is able to map a curvilinear polygonal region directly onto a regular polygonal region, with horizontal and vertical sides. A set of equations have been derived for determining the lengths of these sides and the least-squares method has been used in solving the equations. Several numerical examples are presented to illustrate the method.

A depth-integrated 2D coastal and estuarine model with conformal boundary-fitted mesh generation

Details are given of the development and application of a 2D depth-integrated, conformal boundary-fitted, curvilinear model for predicting the depth-mean velocity field and the spatial concentration distribution in estuarine and coastal waters. A numerical method for conformal mesh generation, based on a boundary integral equation formulation, has been developed. By this method a general polygonal region with curved edges can be mapped onto a regular polygonal region with the same number of horizontal and vertical straight edges and a multiply connected region can be mapped onto a regular region with the same connectivity. A stretching transformation on the conformally generated mesh has also been used to provide greater detail where it is needed close to the coast, with larger mesh sizes further offshore, thereby minimizing the computing effort whilst maximizing accuracy. The curvilinear hydrodynamic and solute model has been developed based on a robust rectilinear model. The hydrodynamic equations are approximated using the ADI finite difference scheme with a staggered grid and the solute transport equation is approximated using a modified QUICK scheme. Three numerical examples have been chosen to test the curvilinear model, with an emphasis placed on complex practical applications

A geometric mass-preserving redistancing scheme for the level set function

In this paper we describe and evaluate a geometric mass-preserving redistancing procedure for the level set function on general structured grids. The proposed algorithm is adapted from a recent finite element-based method and preserves the mass by means of a localized mass correction. A salient feature of the scheme is the absence of adjustable parameters. The algorithm is tested in two and three spatial dimensions and compared with the widely used partial differential equation (PDE)-based redistancing method using structured Cartesian grids. Through the use of quantitative error measures of interest in level set methods, we show that the overall performance of the proposed geometric procedure is better than PDE-based reinitialization schemes, since it is more robust with comparable accuracy. We also show that the algorithm is well-suited for the highly stretched curvilinear grids used in CFD simulations. Copyright (C) 2010 John Wiley & Sons, Ltd.

Use of geographical information systems as a tool for predicting fish yield in tropical reservoirs : case study on Sri Lankan reservoirs

Use of geographical information systems (GIS) in inland fisheries has hitherto been essentially restricted to site evaluation for aquaculture development and assessment of limnological changes in time and space in individual water bodies. The present GIS study was conducted on the land-use pattern of the catchments of nine reservoirs in Sri Lanka, for which detailed fishery data, viz. yield, fishing intensity, landing size of major constituent species, together with selected limnological data such as conductivity and chlorophyll-a, were available. Potential statistical relationships (linear, curvilinear, exponential and second-order polynomial) of fish yield (FY, in kg ha−1 yr−1) to different land-use patterns, such as forest cover (FC, in km2) and shrub-land (SL, in km2), either singly, or in combination, and/or the ratio of each land type to reservoir area (RA in km2) and reservoir capacity (RC in km3), were explored. Highly significant relationships were evident between FY to the ratio of SL and/or FC+SL to RA and/or RC. Similarly, the above land-use types to RA and RC ratios were significantly related to limnological features of the reservoirs. The relationships of FY to various parameters obtained in this study were much better correlated than those relationships of FY to limnological and biological parameters used in yield prediction in tropical and temperate lacustrine waters previously.

Motor-unit coherence and its relation with synchrony are influenced by training

The purpose of the study was to quantify the strength of motor-unit coherence from the left and right first dorsal interosseous muscles in untrained, skill-trained (musicians), and strength-trained (weightlifters) individuals who had long-term specialized use of their hand muscles. The strength of motor-unit coherence was quantified from a total of 394 motor-unit pairs in 13 subjects using data from a previous study in which differences were found in the strength of motor-unit synchronization depending on training status. In the present study, we found that the strength of motor-unit coherence was significantly greater in the left compared with the right hand of untrained right-handed subjects with the largest differences observed between 21 and 24 Hz. The strength of motor-unit coherence was lower in both hands of skill-trained subjects (21–27 Hz) and the right (skilled) hand of untrained subjects (21–24 Hz), whereas the largest motor-unit coherence was observed in both hands of strength-trained subjects (3–9 and 21–27 Hz). A strong curvilinear association was observed between motor-unit synchronization and the integral of coherence at 10–30 Hz in all motor-unit pairs (r² = 0.77), and was most pronounced in strength-trained subjects (r² = 0.90). Furthermore, this association was accentuated when using synchronization data with broad peaks (>11 ms), suggesting that the 10- to 30-Hz coherence is due to oscillatory activity in indirect branched common inputs. The altered coherence with training may be due to an interaction between cortical inhibition and the number of direct common inputs to motor neurons in skill- or strength-trained hands.

Job stress in the law enforcement sector: comparing the linear, non-linear and interaction effects of working conditions

This study addresses a gap in much of the research involving stress among high-risk occupations by investigating the effects of linear, non-linear and interaction models in a law enforcement organization that has undertaken a series of efficiency-driven organizational reforms. The results of a survey involving 2085 police officers indicated that the demand-control-support model provided good utility in predicting an officer's satisfaction, commitment and well-being. In particular, social support and job control were closely associated with all three outcome variables. Although the demand × control/support interactions were not identified in the data, there was some support for the curvilinear effects of job demands. The results have implications for the organizational conditions that need to be addressed in contemporary policing environments where new public management strategies have had widespread affects on the social and organizational context in which policing takes place.

A clarification of the ERI model : the importance of personality

The present study aimed to investigate the role of personality in the etfort-reward imbalance model along with the construct validity of overcommitment in relation to Type A behaviour. The study sample consisted of 898 operational law enforcement persolllel from a large Australian police service. Factor analysis revealed that the overcommitment construct was psychologically related to, but distinct from, the Type A dimensions achievement striving, impatience-irritability and hostility despite the hypothesised interrelatedness of the measures. Multiple regression analyses including tests for curvilinear effects revealed that the Type A dimensions made a significant improvement to the prediction of employee wellbeing and job satisfaction, The results of the study provide theoretical implications in terms of the augmentation of the effort-reward imbalance model.

Promoting health at work : the relevance of organizational justice

Research focusing on the relationship between organizational justice and health suggests that perceptions of fairness can make significant contributions to employee wellbeing. However studies examining the justice health relationship are only just emerging and there are several areas where further research is required, in particular, the uniqueness of the contributions made by justice and the extent to which the health effects can be explained by linear, non-linear and/or interactional models. The primary aim of the current study was to determine the main, curvilinear and interactive effects of job characteristics and organizational justice perceptions on psychological wellbeing and job satisfaction. Job characteristics were measured using the Demand-Control Support (DCS) model (Karasek & Theorell, 1990), while Colquitt's (2001) four justice dimensions (distributive, procedural, interpersonal and informational) were used to assess organizational justice. Hierarchical regression analyses found that in relation to psychological wellbeing, perceptions of justice did not add to the explanatory power of the DCS model. In contrast, organizational justice did account for unique variance in job satisfaction, the second measure of employee wellbeing. The results supported direct linear relationships between the psychosocial working conditions and the outcome measures. The implications of the results of this study, especially in terms of how working conditions should be managed in order to promote health, are discussed. Notably, the findings from the current study indicate that in addition to traditional job stressors, health promotion strategies should focus on perceptions of organizational justice and their relationships with health.

Promoting employee wellbeing : the relevance of work characteristics and organizational justice

Research focusing on the relationship between organizational justice and health suggests that perceptions of fairness can make significant contributions to employee wellbeing. However, studies examining the justice–health relationship are only just emerging and there are several areas where further research is required, in particular, the uniqueness of the contributions made by justice and the extent to which the health effects can be explained by linear, non-linear and/or interaction models. The primary aim of the current study was to determine the main, curvilinear and interaction effects of work characteristics and organizational justice perceptions on employee wellbeing (as measured by psychological health and job satisfaction). Work characteristics were measured using the demand–control–support (DCS) model (Karasek and Theorell, 1990) and Colquitt's (2001) four justice dimensions (distributive, procedural, interpersonal and informational) assessed organizational justice (Colquitt, 2001). Hierarchical regression analyses found that in relation to psychological health, perceptions of justice added little to the explanatory power of the DCS model. In contrast, organizational justice did account for unique variance in job satisfaction, the second measure of employee wellbeing. The results supported linear relationships between the psychosocial working conditions and the outcome measures. A significant two-way interaction effect (control x support at work) was found for the psychological health outcome and the procedural justice by distributive justice interaction was significant for the job satisfaction outcome. Notably, the findings indicate that in addition to traditional job stressors, health promotion strategies should also address organizational justice.

Photoaffinity labeling of the N-methyltransferase domains of cyclosporin synthetase

The multifunctional polypeptide cyclosporin synthetase (CySyn) remains one of the most complex nonribosomal peptide synthetase described. In this study we used a highly specific photoaffinity labeling procedure with the natural cofactor S-adenosyl-l-methionine (AdoMet), 14C-isotopically labeled at the Sδ methyl group to probe the concerted AdoMet-binding interaction of the N-methyltransferase (N-MTase) centers of CySyn. The binding stoichiometry for the enzyme–AdoMet complex was determined to be 1:7, which is in agreement with inferences made from analysis of the complementary DNA sequence of the simA gene encoding the CySyn polypeptide. The photolabeling of the AdoMet-binding sites displayed homotropic negative cooperativity, characterized by a curvilinear Scatchard plot with upward concavity. Although, the process of N-methyl transfer is not a critical event for peptide elongation, the destabilizing homotropic interactions between N-MTase centers that were observed may represent a mechanism whereby the enzyme preserves the proficiency of the substrate-channeling process of cyclosporin peptide assembly over a broad range of cofactor concentrations. Furthermore, we demonstrated the utility of the photolabeling procedure for tracking the enzyme during purification.

Effect of hydrogen/air flow rates and scan rate on the flame ionisation detection response of phopholipids, and their quantitative and qualitative analysis by Iatroscan (Mark‐6s) TLC‐FID

The combined effect of scan speed, hydrogen and air flow rates on the flame ionization detection (FID) peak response of phospholipid classes has been studied to determine the optimum levels of these parameters. The phospholipid composition of different types of commercial lecithins, as well as lecithins combined with fish oils, has been analyzed by Iatroscan TLC‐FID Mark‐6s under optimized conditions. An air flow rate of 2 L/min, a hydrogen flow rate of 150–160 mL/min, and a scan speed of 30 s/rod seem to be the ideal conditions for scanning phospholipids with complete pyrolysis in the flame in the Mark‐6 model. Increasing the scan speed rapidly decreased the FID response. A hydrogen flow rate as high as 170 mL/min could be used at relatively low air flow rates (&#x003C2 L/min) and the response declined when both air flow rate and hydrogen flow rate increased simultaneously. Both linear and curvilinear relationships had highly significant correlations (p&#x003C0.01) with the sample load. Time course reactions, including the hydrolysis of phosphatidylserine using enzymes, can be successfully monitored by the Iatroscan TLC‐FID Chromarod system.