968 resultados para chemical factors
Resumo:
The chemical factors (inorganic nitrogen, phosphate, silicic acid) that potentially or actually control primary production were determined for the Bay of Brest, France, a macrotidal ecosystem submitted to high-nitrate-loaded freshwater inputs (winter nitrate freshwater concentrations >700 mu M, Si:N molar ratio as low as 0.2, i.e. among the lowest ever published). Intensive data collection and observations were carried out from February 1993 to March 1994 to determine the variations of physical [salinity, temperature, photosynthetically active radiation (PAR), freshwater discharges] and chemical (oxygen and nutrients) parameters and their impacts on the phytoplankton cycle (fluorescence, pigments, primary production). With insufficient PAR the winter stocks of nutrients were almost nonutilized and the nitrate excess was exported to the adjacent ocean, due to rapid tidal exchange. By early April, a diatom-dominated spring bloom developed (chlorophyll a maximum = 7.7 mu g l(-1); primary production maximum = 2.34 g C m(-2) d(-1)) under high initial nutrient concentrations. Silicic acid was rapidly exhausted over the whole water column; it is inferred to be the primary limiting factor responsible for the collapse of the spring bloom by mid-May. Successive phytoplankton developments characterized the period of secondary blooms during summer and fall (successive surface chlorophyll a maxima = 3.5, 1.6, 1.8 and 1.0 mu g l(-1); primary production = 1.24, 1.18 and 0.35 g C m(-2) d(-1)). Those secondary blooms developed under lower nutrient concentrations, mostly originating from nutrient recycling. Until August, Si and P most likely limited primary production, whereas the last stage of the productive period in September seemed to be N limited instead, this being a period of total nitrate depletion in almost the whole water column. Si limitation of spring blooms has become a common feature in coastal ecosystems that receive freshwater inputs with Si:N molar ratios <1. The peculiarity of Si Limitation in the Bay of Brest is its extension through the summer period.
Resumo:
Resumo Helicoverpa armigera (Hübner, 1808) (Lepidoptera: Noctuidae) é um inseto exótico, altamente polífago, que foi detectado no Brasil em 2013 causando sérios danos em cultivos de soja, milho e algodão, localizados em áreas estaduais específicas das regiões Nordeste e Centro-Oeste com a presença do bioma Cerrado. Após o período de um ano o inseto foi identificado em várias regiões do País. A literatura indica que o inseto adulto apresenta características físicas que favorecem sua grande capacidade de voo, tanto em distância (100-1000 km) quanto a elevadas altitudes (maiores que 1,5 km acima do nível do solo), aumentando o seu potencial para dispersão de longo alcance, principalmente por voos migratórios das áreas já atacadas. Por essa razão, as massas de ar brasileiras podem atuar como potenciais facilitadoras à atividade migratória do inseto a longas distâncias para as áreas de maior concentração de seus cultivos hospedeiros preferenciais, resultante da atração natural do inseto aos fatores químicos delas decorrentes. Desse modo, devem ser consideradas em avaliações de áreas mais propícias à presença de H. armigera para orientar monitoramentos e estratégias de manejo locais. Este trabalho avaliou a potencial migração de H. armigera por massas de ar para áreas produtoras de cultivos hospedeiros do estado de São Paulo, considerando seus municípios produtores de algodão, soja, milho, tomate, feijão, café e laranja; as principais massas de ar brasileiras; a presença de grandes áreas com cultivos de eucalipto e pinus (outras potenciais barreiras físicas ao inseto); e a localização do bioma Cerrado paulista. Informações das áreas produtoras e das áreas plantadas por município de 2008, 2012 e 2014, disponibilizadas pelo IBGE, foram utilizadas em planos de informação georreferenciados, elaborados em ArcGis 10.3, para identificar a localização de suas respectivas grandes áreas em cada ano. O cruzamento georreferenciado também resultou mapas das áreas plantadas em 2014 com todos os cultivos citados, indicando as de maior potencial de infestação/reinfestações de H. armigera no estado de São Paulo, para orientar monitoramentos e estratégias de Manejo Integrado de Pragas - MIP locais. Abstract Helicoverpa armigera (Hübner, 1808) (Lepidoptera: Noctuidae) is an exotic insect highly polyphagous, which was detected in Brazil in 2013 causing serious damage to soybean, corn and cotton crops located in specific state areas in the northeast and center-west regions with the presence of Cerrado Biome (similar to the Savannah). After a oneyear period, the insect was detected in several regions of the country. Foreign literature indicates that the adult phase of the insect shows certain physical characteristics which favor its great flight capacity, even related to reach long distances (100-1000 Km) as many as to reach high altitudes (overtaken 1.5 Km above the ground level), increasing its potential of farthest dispersion, mainly by migratory flights from the areas already attacked. Therefore, the Brazilian air masses may act as potentially enhance the insect's farthest migratory activity to areas of greater concentration of its preferential host crops due to the insect's natural attraction to their chemical factors. Thus, migration potential of H. armigera by air masses toward preferential host crop areas must be considered in evaluations of most favorable areas to the presence of the insect to guide monitoring and local management strategies. The present work evaluated the H. armigera migration potential by air masses toward producing areas of host crops in São Paulo state, Brazil, considering its municipalities producing cotton, soybean, corn, tomato, bean, coffee, orange, eucalyptus and pine trees, as well as the main Brazilian air masses and the presence of Cerrado Biome in the state. Information of producing and of planting areas with the annual crops by municipalities in 2008, 2012 and 2014, provided by IBGE, were used in cross-maps made using ArcGis 10.3, in order to identify the location of their respective greater areas in each year. Cross-maps also provided results indicating the planting areas in 2014 with all crops already mentioned, as well as the potential areas to infestation/reinfestations of H. armigera in São Paulo State, in order to guide monitoring and local strategies of IPM.
Resumo:
The industrial effluents are one of the main sources of water pollution. For an appropriate characterization and control of their discharges, the most efficient strategy is the integrated use of chemical, physical and ecotoxicological analyses. The aims of this study were to asses the efficiency of the treatment plant of a textile industry performing acute toxicity tests and physical-chemical analyses of the effluents before and after the treatment, besides evaluate the toxicity of the effluents of the Treatment System of Liquids Effluents (Sistema de Tratamento de Efluentes Líquidos - SITEL) of Distrito Industrial de Natal (DIN) and some of their physical-chemical variables. The species used in the ecotoxicological tests was the fish Danio rerio. The results showed that the treatment plant reduced significantly (around 50%) the toxicity of the raw textile effluent in only three of the seven tests but, in general, it promoted the reduction of the physical-chemical parameters analyzed. The toxicity and the physical-chemical factors of the effluents of SITEL of DIN varied among the tests and show the importance of monitoring their discharges in the Potengi river, one of the most important rivers of the Rio Grande do Norte state
Resumo:
It is important to evaluate the quality of water for proper management of these resources, since the increase of environmental degradation and the multiple use of water resources are decreasing the quality of water consumed by living beings. The objective of this study was to characterize the phytoplankton community and its variations during periods of dray and rain in Jiqui Lake located in Parnamirim, RN. It was also aimed to analyze the physical and chemical factors of this environment, in order to contribute to the knowledge of water quality used for human consumption. The collection of water samples were carried out in September 2008 to August 2009. The collection of the phytoplankton community was carried out in four sampling sites (surface, bottom, margin of the lake without macrophytes and site dominated by macrophytes). Phytoplankton was collected using plankton net of 20m. The analysis of nutrients and identification of phytoplankton were performed in the laboratory. The results indicate that concentration of chlorophyll a was high in the bottom with mean value of 1.07 μgL-1 (SD ± 1.61). During the study period there was a dominance of the following species: Euglena gracilis, Trachelomonas sp, Cyclotellas sp, Gomphonema apuncto, Navicula cuspidata var. cuspidata, Navicula sp, Rhopalodia gibba. There was homogeneity between limnological values in the four study sites, with significant difference between the periods of drought and rain. The Jiqui Lake is considered oligotrophic due to its low concentrations of chlorophyll a, high transparency and low levels of nutrients. The values of BOD and chlorophyll a concentration remained below the permitted standards existing for freshwaters in Brazil, thus the water from Lake Jiqui is of good quality, suitable for human consumption.
Resumo:
Chemical and physical restraints are frequently used in the intensive care unit (ICU) to control agitated patients and to prevent self-harm and unplanned extubations. Published work relating to the numerous issues of the care and treatment strategies for these patients remains conflicting and unclear. Literature regarding sedation and chemical restraint reveals a trend towards management with lighter sedation, use of sedation assessment tools and sedation protocols. It remains unclear which treatment is best for agitated and delirious patients, and the evidence on the effect of sedation is conflicting. A large portion of the literature on the use of physical restraint is from general hospital wards and residential homes, and not from the ICU environment. The purpose of this paper is to provide a summary of the existing literature on the use of physical and chemical restraints in the ICU setting. In Part 1 of this two-part paper, the evidence on chemical and physical restraints is explored with specific focus on definition of terms, unplanned
Resumo:
A brief qualitative comparison is made of perovskite ABO sub 3 and layered perovskite ABO sub 3 and layered perovskite A sub 2 BO sub 4 oxides with special emphasis on the influence of geometrical factors on certain physico-chemical properties. The layered perovskite oxides are distinguished from three-dimensional oxides by a looser packing, frustration in three-dimensional interactions, more internal pressure on B--O bonds for small tolerance factors, and by different values of site-percolation thresholds. Their influence on electronic configurations of metal ions, stabilities and syntheses of compounds is discussed. The influence of increased anisotropy in layered oxides on localisation of charge carriers and in suppressing the onset of long-range ferromagnetic ordering is also discussed.
Resumo:
Laurencia dendroidea shows high inter- and intrapopulation variability in the amount of the sesquiterpene elatol, caused by genetic variation as well as environmental factors. To test the independent effect of physical and nutritional conditions, the growth and the levels of elatol in L. dendroidea clones were evaluated under different conditions of temperature, salinity, irradiance, and culture medium in the laboratory. Growth of L. dendroidea was clearly affected by all these factors, but elatol levels were influenced only by temperature and salinity. Better conditions for growth did not produce a similar effect on elatol production in L. dendroidea, contradicting the carbon/nutrient balance and growth/differentiation balance models. On the contrary, severe conditions of temperature and salinity promoted a decrease in elatol levels, as predicted by the environmental stress model. Our results using clones indicated that abiotic factors clearly take part in fostering chemical variations observed in natural populations, in addition to genetic factors, and can promote differential susceptibility of plant specimens to natural enemies.
Resumo:
CHEMICAL AND PHYSICAL FACTORS INFLUENCING LEAD AND COPPER CONTAMINATION IN DRINKING WATER: APPROACH FOR A CASE STUDY IN ANALYTICAL CHEMISTRY. Lead and copper concentrations in drinking water increase considerably on going from municipality reservoirs to the households sampled in Ribeirao Preto (SP-Brazil). Flushing of only 3 liters of water reduced metal concentrations by more than 50%. Relatively small changes in water pH rapidly affected corrosion processes in lead pipes, while water hardness appeared to have a long-term effect. This approach aims to encourage University teachers to use its content as a case study in disciplines of Instrumental Analytical Chemistry and consequently increase knowledge about drinking water contamination in locations where no public monitoring of trace metals is in place.